summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt138
1 files changed, 138 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
new file mode 100644
index 000000000..8e5a7d868
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
@@ -0,0 +1,138 @@
+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs). A CCU is a clock provider that manages
+a set of clock signals. Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+ Shall have a value of the form "brcm,<model>-<which>-ccu",
+ where <model> is a Broadcom SoC model number and <which> is
+ the name of a defined CCU. For example:
+ "brcm,bcm11351-root-ccu"
+ The compatible strings used for each supported SoC family
+ are defined below.
+- reg
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells
+ Shall have value <1>. The permitted clock-specifier values
+ are defined below.
+- clock-output-names
+ Shall be an ordered list of strings defining the names of
+ the clocks provided by the CCU.
+
+Device tree example:
+
+ slave_ccu: slave_ccu {
+ compatible = "brcm,bcm11351-slave-ccu";
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "uartb4";
+ };
+
+ ref_crystal_clk: ref_crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ uart@3e002000 {
+ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+ reg = <0x3e002000 0x1000>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+BCM281XX family
+---------------
+CCU compatible string values for SoCs in the BCM281XX family are:
+ "brcm,bcm11351-root-ccu"
+ "brcm,bcm11351-aon-ccu"
+ "brcm,bcm11351-hub-ccu"
+ "brcm,bcm11351-master-ccu"
+ "brcm,bcm11351-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM281XX family clocks. When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used. These specifiers are defined in:
+ "include/dt-bindings/clock/bcm281xx.h"
+
+ CCU Clock Type Index Specifier
+ --- ----- ---- ----- ---------
+ root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M
+
+ aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER
+ aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC
+ aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR
+
+ hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M
+
+ master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1
+ master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2
+ master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3
+ master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4
+ master dmac peri 4 BCM281XX_MASTER_CCU_DMAC
+ master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC
+ master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M
+ master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M
+
+ slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB
+ slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2
+ slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3
+ slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4
+ slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0
+ slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2
+ slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1
+ slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2
+ slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3
+ slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
+
+
+BCM21664 family
+---------------
+CCU compatible string values for SoCs in the BCM21664 family are:
+ "brcm,bcm21664-root-ccu"
+ "brcm,bcm21664-aon-ccu"
+ "brcm,bcm21664-master-ccu"
+ "brcm,bcm21664-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM21664 family clocks. When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used. These specifiers are defined in:
+ "include/dt-bindings/clock/bcm21664.h"
+
+ CCU Clock Type Index Specifier
+ --- ----- ---- ----- ---------
+ root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M
+
+ aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER
+
+ master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1
+ master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2
+ master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3
+ master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4
+ master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP
+ master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP
+ master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP
+ master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP
+
+ slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB
+ slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2
+ slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3
+ slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4
+ slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1
+ slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2
+ slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3
+ slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4