1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
new file mode 100644
index 000000000..17bb11365
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -0,0 +1,86 @@
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP)
+subsystem. Registers for those clocks are located in the ISP power domain.
+Because those registers are also located in a different memory region than
+the main clock controller, a separate clock controller has to be defined for
+handling them.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos4412-isp-clock".
+
+- reg: physical base address of the ISP clock controller and length of memory
+  mapped region.
+
+- #clock-cells: should be 1.
+
+- clocks: list of the clock controller input clock identifiers,
+  from common clock bindings, should point to CLK_ACLK200 and
+  CLK_ACLK400_MCUISP clocks from the main clock controller.
+
+- clock-names: list of the clock controller input clock names,
+  as described in clock-bindings.txt, should be "aclk200" and
+  "aclk400_mcuisp".
+
+- power-domains: a phandle to ISP power domain node as described by
+  generic PM domain bindings.
+
+Example 3: The clock controllers bindings for Exynos4412 SoCs.
+
+	clock: clock-controller@10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x18000>;
+		#clock-cells = <1>;
+	};
+
+	isp_clock: clock-controller@10048000 {
+		compatible = "samsung,exynos4412-isp-clock";
+		reg = <0x10048000 0x1000>;
+		#clock-cells = <1>;
+		power-domains = <&pd_isp>;
+		clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
+		clock-names = "aclk200", "aclk400_mcuisp";
+	};