summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/clock/actions,owl-cmu.txt52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml108
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml50
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml61
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml147
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml57
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml152
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml63
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml87
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml80
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml57
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml51
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml71
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml50
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml53
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml53
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml77
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml166
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml55
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml53
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml51
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml76
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml103
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml63
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml67
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml68
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml50
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml59
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml60
-rw-r--r--Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml60
-rw-r--r--Documentation/devicetree/bindings/clock/alphascale,acc.txt114
-rw-r--r--Documentation/devicetree/bindings/clock/altr_socfpga.txt30
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt59
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt64
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt53
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml50
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt51
-rw-r--r--Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml105
-rw-r--r--Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt71
-rw-r--r--Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt27
-rw-r--r--Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/artpec6.txt41
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt58
-rw-r--r--Documentation/devicetree/bindings/clock/axi-clkgen.txt25
-rw-r--r--Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt25
-rw-r--r--Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml192
-rw-r--r--Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml131
-rw-r--r--Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml76
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml47
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt31
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt60
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt36
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt313
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt138
-rw-r--r--Documentation/devicetree/bindings/clock/calxeda.yaml82
-rw-r--r--Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml78
-rw-r--r--Documentation/devicetree/bindings/clock/clk-exynos-audss.txt103
-rw-r--r--Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt35
-rw-r--r--Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt53
-rw-r--r--Documentation/devicetree/bindings/clock/clock-bindings.txt186
-rw-r--r--Documentation/devicetree/bindings/clock/clps711x-clock.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/cs2000-cp.txt22
-rw-r--r--Documentation/devicetree/bindings/clock/csr,atlas7-car.txt55
-rw-r--r--Documentation/devicetree/bindings/clock/dove-divider-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/efm32-clock.txt11
-rw-r--r--Documentation/devicetree/bindings/clock/exynos3250-clock.txt57
-rw-r--r--Documentation/devicetree/bindings/clock/exynos4-clock.txt86
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5250-clock.txt41
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5260-clock.txt190
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5410-clock.txt50
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5420-clock.txt42
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5433-clock.txt507
-rw-r--r--Documentation/devicetree/bindings/clock/exynos7-clock.txt108
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-clock.yaml44
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml55
-rw-r--r--Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/fsl,plldig.yaml58
-rw-r--r--Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml55
-rw-r--r--Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/gpio-gate-clock.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/gpio-mux-clock.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/hi3620-clock.txt20
-rw-r--r--Documentation/devicetree/bindings/clock/hi3660-clock.txt47
-rw-r--r--Documentation/devicetree/bindings/clock/hi3670-clock.txt43
-rw-r--r--Documentation/devicetree/bindings/clock/hi6220-clock.txt52
-rw-r--r--Documentation/devicetree/bindings/clock/hisi-crg.txt50
-rw-r--r--Documentation/devicetree/bindings/clock/hix5hd2-clock.txt30
-rw-r--r--Documentation/devicetree/bindings/clock/idt,versaclock5.yaml156
-rw-r--r--Documentation/devicetree/bindings/clock/img,boston-clock.txt31
-rw-r--r--Documentation/devicetree/bindings/clock/imx1-clock.yaml51
-rw-r--r--Documentation/devicetree/bindings/clock/imx21-clock.yaml51
-rw-r--r--Documentation/devicetree/bindings/clock/imx23-clock.yaml94
-rw-r--r--Documentation/devicetree/bindings/clock/imx25-clock.yaml186
-rw-r--r--Documentation/devicetree/bindings/clock/imx27-clock.yaml55
-rw-r--r--Documentation/devicetree/bindings/clock/imx28-clock.yaml117
-rw-r--r--Documentation/devicetree/bindings/clock/imx31-clock.yaml120
-rw-r--r--Documentation/devicetree/bindings/clock/imx35-clock.yaml139
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.yaml65
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.yaml73
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sl-clock.yaml49
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sll-clock.yaml67
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sx-clock.yaml71
-rw-r--r--Documentation/devicetree/bindings/clock/imx6ul-clock.yaml67
-rw-r--r--Documentation/devicetree/bindings/clock/imx7d-clock.yaml65
-rw-r--r--Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml121
-rw-r--r--Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml99
-rw-r--r--Documentation/devicetree/bindings/clock/imx8m-clock.yaml125
-rw-r--r--Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml73
-rw-r--r--Documentation/devicetree/bindings/clock/ingenic,cgu.yaml124
-rw-r--r--Documentation/devicetree/bindings/clock/intc_stratix10.txt20
-rw-r--r--Documentation/devicetree/bindings/clock/intel,agilex.yaml46
-rw-r--r--Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml46
-rw-r--r--Documentation/devicetree/bindings/clock/keystone-gate.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/keystone-pll.txt84
-rw-r--r--Documentation/devicetree/bindings/clock/lpc1850-ccu.txt77
-rw-r--r--Documentation/devicetree/bindings/clock/lpc1850-cgu.txt131
-rw-r--r--Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt52
-rw-r--r--Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,berlin.txt31
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml75
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml69
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,pxa168.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,pxa1928.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/marvell,pxa910.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/maxim,max77686.txt114
-rw-r--r--Documentation/devicetree/bindings/clock/maxim,max9485.txt59
-rw-r--r--Documentation/devicetree/bindings/clock/microchip,pic32.txt39
-rw-r--r--Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/milbeaut-clock.yaml75
-rw-r--r--Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt48
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-core-clock.txt87
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt205
-rw-r--r--Documentation/devicetree/bindings/clock/nspire-clock.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt100
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt63
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt107
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt155
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt63
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt56
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt63
-rw-r--r--Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt30
-rw-r--r--Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt22
-rw-r--r--Documentation/devicetree/bindings/clock/oxnas,stdclk.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/pistachio-clock.txt123
-rw-r--r--Documentation/devicetree/bindings/clock/prima2-clock.txt73
-rw-r--r--Documentation/devicetree/bindings/clock/pwm-clock.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/pxa-clock.txt15
-rw-r--r--Documentation/devicetree/bindings/clock/qca,ath79-pll.txt33
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,a53pll.yaml59
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,camcc.txt18
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml93
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml85
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml53
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml86
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml95
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml53
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml77
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml74
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml74
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc.yaml92
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gpucc.yaml82
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,hfpll.txt60
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,krait-cc.txt34
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,lcc.txt22
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,lpasscc.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,mmcc.yaml104
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml54
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml68
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml43
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,rpmcc.txt57
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml52
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml86
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml108
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml62
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml101
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt59
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,turingcc.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,videocc.yaml73
-rw-r--r--Documentation/devicetree/bindings/clock/qoriq-clock.txt211
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml241
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml60
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml122
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml82
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt98
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt46
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt68
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt70
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt56
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt58
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt58
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt67
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt60
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt58
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt68
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt59
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s2mps11.txt49
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt49
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt49
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt55
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt76
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt77
-rw-r--r--Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml60
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si514.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si5341.txt171
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si5351.txt126
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si544.txt25
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si570.txt39
-rw-r--r--Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/snps,pll-clock.txt28
-rw-r--r--Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml94
-rw-r--r--Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt63
-rw-r--r--Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml103
-rw-r--r--Documentation/devicetree/bindings/clock/st,nomadik.txt104
-rw-r--r--Documentation/devicetree/bindings/clock/st,stm32-rcc.txt138
-rw-r--r--Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt71
-rw-r--r--Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml79
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt32
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt37
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen.txt68
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,flexgen.txt123
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,quadfs.txt45
-rw-r--r--Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt80
-rw-r--r--Documentation/devicetree/bindings/clock/stericsson,abx500.txt20
-rw-r--r--Documentation/devicetree/bindings/clock/tango4-clock.txt23
-rw-r--r--Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml37
-rw-r--r--Documentation/devicetree/bindings/clock/ti,cdce706.txt42
-rw-r--r--Documentation/devicetree/bindings/clock/ti,cdce925.txt53
-rw-r--r--Documentation/devicetree/bindings/clock/ti,sci-clk.txt36
-rw-r--r--Documentation/devicetree/bindings/clock/ti-clkctrl.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt20
-rw-r--r--Documentation/devicetree/bindings/clock/ti/adpll.txt41
-rw-r--r--Documentation/devicetree/bindings/clock/ti/apll.txt45
-rw-r--r--Documentation/devicetree/bindings/clock/ti/autoidle.txt39
-rw-r--r--Documentation/devicetree/bindings/clock/ti/clockdomain.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/ti/composite.txt54
-rw-r--r--Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt93
-rw-r--r--Documentation/devicetree/bindings/clock/ti/davinci/pll.txt96
-rw-r--r--Documentation/devicetree/bindings/clock/ti/davinci/psc.txt71
-rw-r--r--Documentation/devicetree/bindings/clock/ti/divider.txt117
-rw-r--r--Documentation/devicetree/bindings/clock/ti/dpll.txt85
-rw-r--r--Documentation/devicetree/bindings/clock/ti/dra7-atl.txt94
-rw-r--r--Documentation/devicetree/bindings/clock/ti/fapll.txt33
-rw-r--r--Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt43
-rw-r--r--Documentation/devicetree/bindings/clock/ti/gate.txt106
-rw-r--r--Documentation/devicetree/bindings/clock/ti/interface.txt56
-rw-r--r--Documentation/devicetree/bindings/clock/ti/mux.txt79
-rw-r--r--Documentation/devicetree/bindings/clock/ux500.txt64
-rw-r--r--Documentation/devicetree/bindings/clock/vf610-clock.txt41
-rw-r--r--Documentation/devicetree/bindings/clock/vt8500.txt74
-rw-r--r--Documentation/devicetree/bindings/clock/xgene.txt131
-rw-r--r--Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml62
-rw-r--r--Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt63
-rw-r--r--Documentation/devicetree/bindings/clock/zx296702-clk.txt34
-rw-r--r--Documentation/devicetree/bindings/clock/zx296718-clk.txt37
-rw-r--r--Documentation/devicetree/bindings/clock/zynq-7000.txt110
269 files changed, 18665 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
new file mode 100644
index 000000000..d19885b7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -0,0 +1,52 @@
+* Actions Semi Owl Clock Management Unit (CMU)
+
+The Actions Semi Owl Clock Management Unit generates and supplies clock
+to various controllers within the SoC. The clock binding described here is
+applicable to S900, S700 and S500 SoC's.
+
+Required Properties:
+
+- compatible: should be one of the following,
+ "actions,s900-cmu"
+ "actions,s700-cmu"
+ "actions,s500-cmu"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- clocks: Reference to the parent clocks ("hosc", "losc")
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier, and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in corresponding
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
+actions,s500-cmu.h header and can be used in device tree sources.
+
+External clocks:
+
+The hosc clock used as input for the plls is generated outside the SoC. It is
+expected that it is defined using standard clock bindings as "hosc".
+
+Actions Semi S900 CMU also requires one more clock:
+ - "losc" - internal low frequency oscillator
+
+Example: Clock Management Unit node:
+
+ cmu: clock-controller@e0160000 {
+ compatible = "actions,s900-cmu";
+ reg = <0x0 0xe0160000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes clock generated by the clock
+management unit:
+
+ uart: serial@e012a000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012a000 0x0 0x2000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_UART5>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
new file mode 100644
index 000000000..558db4b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AHB Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-ahb-clk
+ - allwinner,sun6i-a31-ahb1-clk
+ - allwinner,sun8i-h3-ahb2-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun4i-a10-ahb-clk
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun6i-a31-ahb1-clk
+
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-h3-ahb2-clk
+
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+
+examples:
+ - |
+ ahb@1c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&axi>;
+ clock-output-names = "ahb";
+ };
+
+ - |
+ ahb1@1c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-ahb1-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clock-output-names = "ahb1";
+ };
+
+ - |
+ ahb2_clk@1c2005c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ahb2-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&ahb1>, <&pll6d2>;
+ clock-output-names = "ahb2";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
new file mode 100644
index 000000000..b1e3d739b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB0 Bus Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-apb0-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ apb0@1c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb>;
+ clock-output-names = "apb0";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
new file mode 100644
index 000000000..51b7a6d4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB1 Bus Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-apb1-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
new file mode 100644
index 000000000..d801158e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AXI Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-axi-clk
+ - allwinner,sun8i-a23-axi-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ axi@1c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-axi-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ - |
+ axi_clk@1c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-axi-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
new file mode 100644
index 000000000..3b45344ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Clock Control Unit Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-ccu
+ - allwinner,sun5i-a10s-ccu
+ - allwinner,sun5i-a13-ccu
+ - allwinner,sun6i-a31-ccu
+ - allwinner,sun7i-a20-ccu
+ - allwinner,sun8i-a23-ccu
+ - allwinner,sun8i-a33-ccu
+ - allwinner,sun8i-a83t-ccu
+ - allwinner,sun8i-a83t-r-ccu
+ - allwinner,sun8i-h3-ccu
+ - allwinner,sun8i-h3-r-ccu
+ - allwinner,sun8i-r40-ccu
+ - allwinner,sun8i-v3-ccu
+ - allwinner,sun8i-v3s-ccu
+ - allwinner,sun9i-a80-ccu
+ - allwinner,sun50i-a64-ccu
+ - allwinner,sun50i-a64-r-ccu
+ - allwinner,sun50i-a100-ccu
+ - allwinner,sun50i-a100-r-ccu
+ - allwinner,sun50i-h5-ccu
+ - allwinner,sun50i-h6-ccu
+ - allwinner,sun50i-h6-r-ccu
+ - allwinner,suniv-f1c100s-ccu
+ - nextthing,gr8-ccu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+ items:
+ - description: High Frequency Oscillator (usually at 24MHz)
+ - description: Low Frequency Oscillator (usually at 32kHz)
+ - description: Internal Oscillator
+ - description: Peripherals PLL
+
+ clock-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ - const: hosc
+ - const: losc
+ - const: iosc
+ - const: pll-periph
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun8i-a83t-r-ccu
+ - allwinner,sun8i-h3-r-ccu
+ - allwinner,sun50i-a64-r-ccu
+ - allwinner,sun50i-a100-r-ccu
+ - allwinner,sun50i-h6-r-ccu
+
+then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+
+ clock-names:
+ minItems: 4
+ maxItems: 4
+
+else:
+ if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-a100-ccu
+ - allwinner,sun50i-h6-ccu
+
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+
+ clock-names:
+ minItems: 3
+ maxItems: 3
+
+ else:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+
+ clock-names:
+ minItems: 2
+ maxItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ ccu: clock@1c20000 {
+ compatible = "allwinner,sun8i-h3-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ - |
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
new file mode 100644
index 000000000..0dfafba1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-cpu-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ cpu@1c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
new file mode 100644
index 000000000..7484a7ab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ "#reset-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-display-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20104 {
+ #clock-cells = <0>;
+ #reset-cells = <0>;
+ compatible = "allwinner,sun4i-a10-display-clk";
+ reg = <0x01c20104 0x4>;
+ clocks = <&pll3>, <&pll7>, <&pll5 1>;
+ clock-output-names = "de-be";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
new file mode 100644
index 000000000..9a37a357c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ This additional argument passed to that clock is the offset of
+ the bit controlling this particular gate in the register.
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-gates-clk
+ - const: allwinner,sun4i-a10-axi-gates-clk
+ - const: allwinner,sun4i-a10-ahb-gates-clk
+ - const: allwinner,sun5i-a10s-ahb-gates-clk
+ - const: allwinner,sun5i-a13-ahb-gates-clk
+ - const: allwinner,sun7i-a20-ahb-gates-clk
+ - const: allwinner,sun6i-a31-ahb1-gates-clk
+ - const: allwinner,sun8i-a23-ahb1-gates-clk
+ - const: allwinner,sun9i-a80-ahb0-gates-clk
+ - const: allwinner,sun9i-a80-ahb1-gates-clk
+ - const: allwinner,sun9i-a80-ahb2-gates-clk
+ - const: allwinner,sun4i-a10-apb0-gates-clk
+ - const: allwinner,sun5i-a10s-apb0-gates-clk
+ - const: allwinner,sun5i-a13-apb0-gates-clk
+ - const: allwinner,sun7i-a20-apb0-gates-clk
+ - const: allwinner,sun9i-a80-apb0-gates-clk
+ - const: allwinner,sun8i-a83t-apb0-gates-clk
+ - const: allwinner,sun4i-a10-apb1-gates-clk
+ - const: allwinner,sun5i-a13-apb1-gates-clk
+ - const: allwinner,sun5i-a10s-apb1-gates-clk
+ - const: allwinner,sun6i-a31-apb1-gates-clk
+ - const: allwinner,sun7i-a20-apb1-gates-clk
+ - const: allwinner,sun8i-a23-apb1-gates-clk
+ - const: allwinner,sun9i-a80-apb1-gates-clk
+ - const: allwinner,sun6i-a31-apb2-gates-clk
+ - const: allwinner,sun8i-a23-apb2-gates-clk
+ - const: allwinner,sun8i-a83t-bus-gates-clk
+ - const: allwinner,sun9i-a80-apbs-gates-clk
+ - const: allwinner,sun4i-a10-dram-gates-clk
+
+ - items:
+ - const: allwinner,sun5i-a13-dram-gates-clk
+ - const: allwinner,sun4i-a10-gates-clk
+
+ - items:
+ - const: allwinner,sun8i-h3-apb0-gates-clk
+ - const: allwinner,sun4i-a10-gates-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-indices:
+ minItems: 1
+ maxItems: 64
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 64
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-indices
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c2005c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&axi>;
+ clock-indices = <0>;
+ clock-output-names = "axi_dram";
+ };
+
+ - |
+ clk@1c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb>;
+ clock-indices = <0>, <1>,
+ <2>, <3>,
+ <4>, <5>, <6>,
+ <7>, <8>, <9>,
+ <10>, <11>, <12>,
+ <13>, <14>, <16>,
+ <17>, <18>, <20>,
+ <21>, <22>, <23>,
+ <24>, <25>, <26>,
+ <32>, <33>, <34>,
+ <35>, <36>, <37>,
+ <40>, <41>, <43>,
+ <44>, <45>,
+ <46>, <47>,
+ <50>, <52>;
+ clock-output-names = "ahb_usb0", "ahb_ehci0",
+ "ahb_ohci0", "ahb_ehci1",
+ "ahb_ohci1", "ahb_ss", "ahb_dma",
+ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+ "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+ "ahb_nand", "ahb_sdram", "ahb_ace",
+ "ahb_emac", "ahb_ts", "ahb_spi0",
+ "ahb_spi1", "ahb_spi2", "ahb_spi3",
+ "ahb_pata", "ahb_sata", "ahb_gps",
+ "ahb_ve", "ahb_tvd", "ahb_tve0",
+ "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
+ "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+ "ahb_de_be0", "ahb_de_be1",
+ "ahb_de_fe0", "ahb_de_fe1",
+ "ahb_mp", "ahb_mali400";
+ };
+
+
+ - |
+ clk@1c20068 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb0>;
+ clock-indices = <0>, <1>,
+ <2>, <3>,
+ <5>, <6>,
+ <7>, <10>;
+ clock-output-names = "apb0_codec", "apb0_spdif",
+ "apb0_ac97", "apb0_iis",
+ "apb0_pio", "apb0_ir0",
+ "apb0_ir1", "apb0_keypad";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
new file mode 100644
index 000000000..18f131e26
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MBUS Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun5i-a13-mbus-clk
+ - allwinner,sun8i-a23-mbus-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
+
+ - |
+ clk@1c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+ clock-output-names = "mbus";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
new file mode 100644
index 000000000..5199285a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ There is three different outputs: the main clock, with the ID 0,
+ and the output and sample clocks, with the IDs 1 and 2,
+ respectively.
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-mmc-clk
+ - allwinner,sun9i-a80-mmc-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 3
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun4i-a10-mmc-clk
+
+then:
+ properties:
+ clocks:
+ maxItems: 3
+
+else:
+ properties:
+ clocks:
+ maxItems: 2
+
+examples:
+ - |
+ clk@1c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+ };
+
+ - |
+ clk@6000410 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000410 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc0", "mmc0_output",
+ "mmc0_sample";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
new file mode 100644
index 000000000..3e2abe3e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 0 Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun4i-a10-mod0-clk
+ - allwinner,sun9i-a80-mod0-clk
+
+ # The PRCM on the A31 and A23 will have the reg property missing,
+ # since it's set at the upper level node, and will be validated by
+ # PRCM's schema. Make sure we only validate standalone nodes.
+ required:
+ - compatible
+ - reg
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-mod0-clk
+ - allwinner,sun9i-a80-mod0-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ # On the A80, the PRCM mod0 clocks have 2 parents.
+ minItems: 2
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ - |
+ clk@8001454 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x08001454 0x4>;
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "r_ir";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
new file mode 100644
index 000000000..7ddb55c75
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-mod1-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun4i-a10-pll2.h>
+
+ clk@1c200c0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod1-clk";
+ reg = <0x01c200c0 0x4>;
+ clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+ <&pll2 SUN4I_A10_PLL2_4X>,
+ <&pll2 SUN4I_A10_PLL2_2X>,
+ <&pll2 SUN4I_A10_PLL2_1X>;
+ clock-output-names = "spdif";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
new file mode 100644
index 000000000..c604822cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-osc-clk
+
+ reg:
+ maxItems: 1
+
+ clock-frequency:
+ description: >
+ Frequency of the main oscillator.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clock-frequency
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ osc24M: clk@1c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
new file mode 100644
index 000000000..e9c4cf834
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU PLL Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pll1-clk
+ - allwinner,sun6i-a31-pll1-clk
+ - allwinner,sun8i-a23-pll1-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc24M";
+ };
+
+ - |
+ clk@1c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ - |
+ clk@1c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
new file mode 100644
index 000000000..4b80a42fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video PLL Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-pll3-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20010 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20010 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll3";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
new file mode 100644
index 000000000..415bd77de
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DRAM PLL Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The first output is the DRAM clock output, the second is meant
+ for peripherals on the SoC.
+
+ compatible:
+ const: allwinner,sun4i-a10-pll5-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 2
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
new file mode 100644
index 000000000..ec5652f76
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Peripheral PLL Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The first output is the SATA clock output, the second is the
+ regular PLL output, the third is a PLL output at twice the rate.
+
+ compatible:
+ const: allwinner,sun4i-a10-pll6-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 3
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
new file mode 100644
index 000000000..0a335c615
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-tcon-ch0-clk
+ - allwinner,sun4i-a10-tcon-ch1-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun4i-a10-tcon-ch0-clk
+
+then:
+ required:
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20118 {
+ #clock-cells = <0>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+ reg = <0x01c20118 0x4>;
+ clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+ clock-output-names = "tcon-ch0-sclk";
+ };
+
+ - |
+ clk@1c2012c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+ reg = <0x01c2012c 0x4>;
+ clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+ clock-output-names = "tcon-ch1-sclk";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
new file mode 100644
index 000000000..cd95d25bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The additional ID argument passed to the clock shall refer to
+ the index of the output.
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-usb-clk
+ - allwinner,sun5i-a13-usb-clk
+ - allwinner,sun6i-a31-usb-clk
+ - allwinner,sun8i-a23-usb-clk
+ - allwinner,sun8i-h3-usb-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ minItems: 2
+ maxItems: 8
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun4i-a10-usb-clk
+
+ then:
+ properties:
+ clock-output-names:
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun5i-a13-usb-clk
+
+ then:
+ properties:
+ clock-output-names:
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun6i-a31-usb-clk
+
+ then:
+ properties:
+ clock-output-names:
+ maxItems: 6
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-a23-usb-clk
+
+ then:
+ properties:
+ clock-output-names:
+ maxItems: 5
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-h3-usb-clk
+
+ then:
+ properties:
+ clock-output-names:
+ maxItems: 8
+
+examples:
+ - |
+ clk@1c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun4i-a10-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ };
+
+ - |
+ clk@1c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_phy";
+ };
+
+ - |
+ clk@1c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+ "usb_ohci0", "usb_ohci1",
+ "usb_ohci2";
+ };
+
+ - |
+ clk@1c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun8i-a23-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
+ "usb_hsic_12M", "usb_ohci0";
+ };
+
+ - |
+ clk@1c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun8i-h3-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "usb_phy0", "usb_phy1",
+ "usb_phy2", "usb_phy3",
+ "usb_ohci0", "usb_ohci1",
+ "usb_ohci2", "usb_ohci3";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
new file mode 100644
index 000000000..5dfd0c1c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video Engine Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ "#reset-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun4i-a10-ve-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c2013c {
+ #clock-cells = <0>;
+ #reset-cells = <0>;
+ compatible = "allwinner,sun4i-a10-ve-clk";
+ reg = <0x01c2013c 0x4>;
+ clocks = <&pll4>;
+ clock-output-names = "ve";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
new file mode 100644
index 000000000..99add7991
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 AHB Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun5i-a13-ahb-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ ahb@1c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&axi>, <&cpu>, <&pll6 1>;
+ clock-output-names = "ahb";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
new file mode 100644
index 000000000..5f377205a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral PLL Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The first output is the regular PLL output, the second is a PLL
+ output at twice the rate.
+
+ compatible:
+ const: allwinner,sun6i-a31-pll6-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 2
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6", "pll6x2";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
new file mode 100644
index 000000000..59e5dce1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC TX Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun7i-a20-gmac-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+ description: >
+ The parent clocks shall be fixed rate dummy clocks at 25 MHz and
+ 125 MHz, respectively.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20164 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c20164 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
new file mode 100644
index 000000000..c745733bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 Output Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun7i-a20-out-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c201f0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f0 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_a";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
new file mode 100644
index 000000000..3f995d2b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-de2-clk
+ - const: allwinner,sun8i-h3-de2-clk
+ - const: allwinner,sun8i-v3s-de2-clk
+ - const: allwinner,sun50i-a64-de2-clk
+ - const: allwinner,sun50i-h5-de2-clk
+ - const: allwinner,sun50i-h6-de2-clk
+ - items:
+ - const: allwinner,sun8i-r40-de2-clk
+ - const: allwinner,sun8i-h3-de2-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun8i-h3-ccu.h>
+ #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+ de2_clocks: clock@1000000 {
+ compatible = "allwinner,sun8i-h3-de2-clk";
+ reg = <0x01000000 0x100000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_DE>;
+ clock-names = "bus",
+ "mod";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
new file mode 100644
index 000000000..3eb2bf65b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ This additional argument passed to that clock is the offset of
+ the bit controlling this particular gate in the register.
+
+ compatible:
+ const: allwinner,sun8i-h3-bus-gates-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-indices:
+ minItems: 1
+ maxItems: 64
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 64
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-indices
+ - clock-names
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-h3-bus-gates-clk";
+ reg = <0x01c20060 0x14>;
+ clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+ clock-names = "ahb1", "ahb2", "apb1", "apb2";
+ clock-indices = <5>, <6>, <8>,
+ <9>, <10>, <13>,
+ <14>, <17>, <18>,
+ <19>, <20>,
+ <21>, <23>,
+ <24>, <25>,
+ <26>, <27>,
+ <28>, <29>,
+ <30>, <31>, <32>,
+ <35>, <36>, <37>,
+ <40>, <41>, <43>,
+ <44>, <52>, <53>,
+ <54>, <64>,
+ <65>, <69>, <72>,
+ <76>, <77>, <78>,
+ <96>, <97>, <98>,
+ <112>, <113>,
+ <114>, <115>,
+ <116>, <128>, <135>;
+ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
+ "bus_mmc1", "bus_mmc2", "bus_nand",
+ "bus_sdram", "bus_gmac", "bus_ts",
+ "bus_hstimer", "bus_spi0",
+ "bus_spi1", "bus_otg",
+ "bus_otg_ehci0", "bus_ehci1",
+ "bus_ehci2", "bus_ehci3",
+ "bus_otg_ohci0", "bus_ohci1",
+ "bus_ohci2", "bus_ohci3", "bus_ve",
+ "bus_lcd0", "bus_lcd1", "bus_deint",
+ "bus_csi", "bus_tve", "bus_hdmi",
+ "bus_de", "bus_gpu", "bus_msgbox",
+ "bus_spinlock", "bus_codec",
+ "bus_spdif", "bus_pio", "bus_ths",
+ "bus_i2s0", "bus_i2s1", "bus_i2s2",
+ "bus_i2c0", "bus_i2c1", "bus_i2c2",
+ "bus_uart0", "bus_uart1",
+ "bus_uart2", "bus_uart3",
+ "bus_scr", "bus_ephy", "bus_dbg";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
new file mode 100644
index 000000000..d178da90a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 AHB Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun9i-a80-ahb-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@6000060 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-ahb-clk";
+ reg = <0x06000060 0x4>;
+ clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "ahb0";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
new file mode 100644
index 000000000..0351c79bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 APB0 Bus Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun9i-a80-apb0-clk
+ - allwinner,sun9i-a80-apb1-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@6000070 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-apb0-clk";
+ reg = <0x06000070 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "apb0";
+ };
+
+ - |
+ clk@6000074 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-apb1-clk";
+ reg = <0x06000074 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "apb1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
new file mode 100644
index 000000000..24d5b2f1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 CPUS Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun9i-a80-cpus-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@8001410 {
+ compatible = "allwinner,sun9i-a80-cpus-clk";
+ reg = <0x08001410 0x4>;
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+ clock-output-names = "cpus";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
new file mode 100644
index 000000000..a82c7c7e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-de-clks
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: RAM Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: mod
+ - const: dram
+ - const: bus
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun9i-a80-ccu.h>
+ #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+ de_clocks: clock@3000000 {
+ compatible = "allwinner,sun9i-a80-de-clks";
+ reg = <0x03000000 0x30>;
+ clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+ clock-names = "mod", "dram", "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
new file mode 100644
index 000000000..43963c306
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 GT Bus Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun9i-a80-gt-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+ description: >
+ The parent order must match the hardware programming order.
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@600005c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-gt-clk";
+ reg = <0x0600005c 0x4>;
+ clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "gt";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
new file mode 100644
index 000000000..20dc115fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 MMC Configuration Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+description: >
+ There is one clock/reset output per mmc controller. The number of
+ outputs is determined by the size of the address block, which is
+ related to the overall mmc block.
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The additional ID argument passed to the clock shall refer to
+ the index of the output.
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-mmc-config-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 4
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@1c13000 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-config-clk";
+ reg = <0x01c13000 0x10>;
+ clocks = <&ahb0_gates 8>;
+ resets = <&ahb0_resets 8>;
+ clock-output-names = "mmc0_config", "mmc1_config",
+ "mmc2_config", "mmc3_config";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
new file mode 100644
index 000000000..b76bab6a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Peripheral PLL Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun9i-a80-pll4-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@600000c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-pll4-clk";
+ reg = <0x0600000c 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll4";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
new file mode 100644
index 000000000..fa0ee03a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-usb-clocks
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: High Frequency Oscillator
+
+ clock-names:
+ items:
+ - const: bus
+ - const: hosc
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+ usb_clocks: clock@a08000 {
+ compatible = "allwinner,sun9i-a80-usb-clks";
+ reg = <0x00a08000 0x8>;
+ clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+ clock-names = "bus", "hosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
new file mode 100644
index 000000000..15218d10e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Module Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The additional ID argument passed to the clock shall refer to
+ the index of the output.
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-usb-mod-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 6
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@a08000 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-mod-clk";
+ reg = <0x00a08000 0x4>;
+ clocks = <&ahb1_gates 1>;
+ clock-output-names = "usb0_ahb", "usb_ohci0",
+ "usb1_ahb", "usb_ohci1",
+ "usb2_ahb", "usb_ohci2";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
new file mode 100644
index 000000000..256904168
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Clock Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+ "#clock-cells":
+ const: 1
+ description: >
+ The additional ID argument passed to the clock shall refer to
+ the index of the output.
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun9i-a80-usb-phy-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 6
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clk@a08004 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-phy-clk";
+ reg = <0x00a08004 0x4>;
+ clocks = <&ahb1_gates 1>;
+ clock-output-names = "usb_phy0", "usb_hsic1_480M",
+ "usb_phy1", "usb_hsic2_480M",
+ "usb_phy2", "usb_hsic_12M";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
new file mode 100644
index 000000000..b3205b21c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
@@ -0,0 +1,114 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM 0
+CLKID_AHB_RAM 1
+CLKID_AHB_GPIO 2
+CLKID_AHB_MAC 3
+CLKID_AHB_EMI 4
+CLKID_AHB_USB0 5
+CLKID_AHB_USB1 6
+CLKID_AHB_DMA0 7
+CLKID_AHB_DMA1 8
+CLKID_AHB_UART0 9
+CLKID_AHB_UART1 10
+CLKID_AHB_UART2 11
+CLKID_AHB_UART3 12
+CLKID_AHB_UART4 13
+CLKID_AHB_UART5 14
+CLKID_AHB_UART6 15
+CLKID_AHB_UART7 16
+CLKID_AHB_UART8 17
+CLKID_AHB_UART9 18
+CLKID_AHB_I2S0 19
+CLKID_AHB_I2C0 20
+CLKID_AHB_I2C1 21
+CLKID_AHB_SSP0 22
+CLKID_AHB_IOCONFIG 23
+CLKID_AHB_WDT 24
+CLKID_AHB_CAN0 25
+CLKID_AHB_CAN1 26
+CLKID_AHB_MPWM 27
+CLKID_AHB_SPI0 28
+CLKID_AHB_SPI1 29
+CLKID_AHB_QEI 30
+CLKID_AHB_QUADSPI0 31
+CLKID_AHB_CAMIF 32
+CLKID_AHB_LCDIF 33
+CLKID_AHB_TIMER0 34
+CLKID_AHB_TIMER1 35
+CLKID_AHB_TIMER2 36
+CLKID_AHB_TIMER3 37
+CLKID_AHB_IRQ 38
+CLKID_AHB_RTC 39
+CLKID_AHB_NAND 40
+CLKID_AHB_ADC0 41
+CLKID_AHB_LED 42
+CLKID_AHB_DAC0 43
+CLKID_AHB_LCD 44
+CLKID_AHB_I2S1 45
+CLKID_AHB_MAC1 46
+
+CLKID_SYS_CPU 47
+CLKID_SYS_AHB 48
+CLKID_SYS_I2S0M 49
+CLKID_SYS_I2S0S 50
+CLKID_SYS_I2S1M 51
+CLKID_SYS_I2S1S 52
+CLKID_SYS_UART0 53
+CLKID_SYS_UART1 54
+CLKID_SYS_UART2 55
+CLKID_SYS_UART3 56
+CLKID_SYS_UART4 56
+CLKID_SYS_UART5 57
+CLKID_SYS_UART6 58
+CLKID_SYS_UART7 59
+CLKID_SYS_UART8 60
+CLKID_SYS_UART9 61
+CLKID_SYS_SPI0 62
+CLKID_SYS_SPI1 63
+CLKID_SYS_QUADSPI 64
+CLKID_SYS_SSP0 65
+CLKID_SYS_NAND 66
+CLKID_SYS_TRACE 67
+CLKID_SYS_CAMM 68
+CLKID_SYS_WDT 69
+CLKID_SYS_CLKOUT 70
+CLKID_SYS_MAC 71
+CLKID_SYS_LCD 72
+CLKID_SYS_ADCANA 73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+ compatible = "alphascale,asm9260-uart";
+ reg = <0x80010000 0x4000>;
+ clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+ interrupts = <19>;
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+};
+
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
new file mode 100644
index 000000000..f72e80e0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -0,0 +1,30 @@
+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "altr,socfpga-pll-clock" - for a PLL clock
+ "altr,socfpga-perip-clock" - The peripheral clock divided from the
+ PLL clock.
+ "altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+ can get gated.
+
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+ either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+ and the bit index.
+- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
+ the divider register, bit shift, and width.
+- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
+ the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
+ value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
+ hold/delay times that is needed for the SD/MMC CIU clock. The values of both
+ can be 0-315 degrees, in 45 degree increments.
diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
new file mode 100644
index 000000000..3a8948c04
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
@@ -0,0 +1,59 @@
+* Amlogic AXG Audio Clock Controllers
+
+The Amlogic AXG audio clock controller generates and supplies clock to the
+other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+devices.
+
+Required Properties:
+
+- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D,
+ "amlogic,g12a-audio-clkc" for G12A,
+ "amlogic,sm1-audio-clkc" for S905X3.
+- reg : physical base address of the clock controller and length of
+ memory mapped region.
+- clocks : a list of phandle + clock-specifier pairs for the clocks listed
+ in clock-names.
+- clock-names : must contain the following:
+ * "pclk" - Main peripheral bus clock
+ may contain the following:
+ * "mst_in[0-7]" - 8 input plls to generate clock signals
+ * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
+ components.
+ * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
+ components.
+- resets : phandle of the internal reset line
+- #clock-cells : should be 1.
+- #reset-cells : should be 1 on the g12a (and following) soc family
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
+used in device tree sources.
+
+Example:
+
+clkc_audio: clock-controller@0 {
+ compatible = "amlogic,axg-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7";
+ resets = <&reset RESET_AUDIO>;
+};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
new file mode 100644
index 000000000..c41f0be5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -0,0 +1,64 @@
+* Amlogic GXBB AO Clock and Reset Unit
+
+The Amlogic GXBB AO clock controller generates and supplies clock to various
+controllers within the Always-On part of the SoC.
+
+Required Properties:
+
+- compatible: value should be different for each SoC family as :
+ - GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+ - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+ - GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
+ - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
+ followed by the common "amlogic,meson-gx-aoclkc"
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "xtal" : the platform xtal
+ * "mpeg-clk" : the main clock controller mother clock (aka clk81)
+ * "ext-32k-0" : external 32kHz reference #0 if any (optional)
+ * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only)
+ * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only)
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+- #reset-cells: should be 1.
+
+Each reset is assigned an identifier and client nodes can use this identifier
+to specify the reset which they consume. All available resets are defined as
+preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
+Example: AO Clock controller node:
+
+ao_sysctrl: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ clkc_AO: clock-controller {
+ compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "mpeg-clk";
+ };
+
+Example: UART controller node that consumes the clock and reset generated
+ by the clock controller:
+
+ uart_AO: serial@4c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x4c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc_AO CLKID_AO_UART1>;
+ resets = <&clkc_AO RESET_AO_UART1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
new file mode 100644
index 000000000..7ccecd5c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -0,0 +1,53 @@
+* Amlogic GXBB Clock and Reset Unit
+
+The Amlogic GXBB clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+ "amlogic,g12a-clkc" for G12A SoC.
+ "amlogic,g12b-clkc" for G12B SoC.
+ "amlogic,sm1-clkc" for SM1 SoC.
+- clocks : list of clock phandle, one for each entry clock-names.
+- clock-names : should contain the following:
+ * "xtal": the platform xtal
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
+used in device tree sources.
+
+Parent node should have the following properties :
+- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
+ "amlogic,meson-axg-hhi-sysctrl"
+- reg: base address and size of the HHI system control register space.
+
+Example: Clock controller node:
+
+sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ #clock-cells = <1>;
+ compatible = "amlogic,gxbb-clkc";
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ };
+};
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
new file mode 100644
index 000000000..4b8669f87
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic DDR Clock Controller Device Tree Bindings
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson8-ddr-clkc
+ - amlogic,meson8b-ddr-clkc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xtal
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ ddr_clkc: clock-controller@400 {
+ compatible = "amlogic,meson8-ddr-clkc";
+ reg = <0x400 0x20>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
new file mode 100644
index 000000000..cc51e4746
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -0,0 +1,51 @@
+* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
+
+The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
+supplies clock to various controllers within the SoC.
+
+Required Properties:
+
+- compatible: must be one of:
+ - "amlogic,meson8-clkc" for Meson8 (S802) SoCs
+ - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
+ - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+ * "xtal": the 24MHz system oscillator
+ * "ddr_pll": the DDR PLL clock
+ * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+- reg: base address and size of the HHI system control register space.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
+used in device tree sources.
+
+Similarly a preprocessor macro for each reset line is defined in
+dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
+device tree sources).
+
+
+Example: Clock controller node:
+
+ clkc: clock-controller {
+ compatible = "amlogic,meson8b-clkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
new file mode 100644
index 000000000..eb241587e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System Controller ICST Clocks
+
+maintainers:
+ - Linus Walleij <linusw@kernel.org>
+
+description: |
+ The ICS525 and ICS307 oscillators are produced by Integrated
+ Devices Technology (IDT). ARM integrated these oscillators deeply into their
+ reference designs by adding special control registers that manage such
+ oscillators to their system controllers.
+
+ The various ARM system controllers contain logic to serialize and initialize
+ an ICST clock request after a write to the 32 bit register at an offset
+ into the system controller. Furthermore, to even be able to alter one of
+ these frequencies, the system controller must first be unlocked by
+ writing a special token to another offset in the system controller.
+
+ Some ARM hardware contain special versions of the serial interface that only
+ connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
+ different values and sometimes also hard-wires the output divider. They
+ therefore have special compatible strings as per this table (the OD value is
+ the value on the pins, not the resulting output divider).
+
+ In the core modules and logic tiles, the ICST is a configurable clock fed
+ from a 24 MHz clock on the motherboard (usually the main crystal) used for
+ generating e.g. video clocks. It is located on the core module and there is
+ only one of these. This clock node must be a subnode of the core module.
+
+ Hardware variant RDW OD VDW
+
+ Integrator/AP 22 1 Bit 8 0, rest variable
+ integratorap-cm
+
+ Integrator/AP 46 3 Bit 8 0, rest variable
+ integratorap-sys
+
+ Integrator/AP 22 or 1 17 or (33 or 25 MHz)
+ integratorap-pci 14 1 14
+
+ Integrator/CP 22 variable Bit 8 0, rest variable
+ integratorcp-cm-core
+
+ Integrator/CP 22 variable Bit 8 0, rest variable
+ integratorcp-cm-mem
+
+ The ICST oscillator must be provided inside a system controller node.
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - arm,syscon-icst525
+ - arm,syscon-icst307
+ - arm,syscon-icst525-integratorap-cm
+ - arm,syscon-icst525-integratorap-sys
+ - arm,syscon-icst525-integratorap-pci
+ - arm,syscon-icst525-integratorcp-cm-core
+ - arm,syscon-icst525-integratorcp-cm-mem
+ - arm,integrator-cm-auxosc
+ - arm,versatile-cm-auxosc
+ - arm,impd-vco1
+ - arm,impd-vco2
+
+ clocks:
+ description: Parent clock for the ICST VCO
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+ lock-offset:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: Offset to the unlocking register for the oscillator
+
+ vco-offset:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: Offset to the VCO register for the oscillator
+
+required:
+ - "#clock-cells"
+ - compatible
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ vco1: clock {
+ compatible = "arm,impd1-vco1";
+ #clock-cells = <0>;
+ lock-offset = <0x08>;
+ vco-offset = <0x00>;
+ clocks = <&sysclk>;
+ clock-output-names = "IM-PD1-VCO1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
new file mode 100644
index 000000000..fbf58c443
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
@@ -0,0 +1,71 @@
+* Peripheral Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide peripheral clocks which are
+used as clock source for the peripheral of the SoC.
+
+There are two different blocks associated to north bridge and south
+bridge.
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs for Armada 3700 North bridge clocks:
+ID Clock name Description
+-----------------------------------
+0 mmc MMC controller
+1 sata_host Sata Host
+2 sec_at Security AT
+3 sac_dap Security DAP
+4 tsecm Security Engine
+5 setm_tmx Serial Embedded Trace Module
+6 avs Adaptive Voltage Scaling
+7 sqf SPI
+8 pwm PWM
+9 i2c_2 I2C 2
+10 i2c_1 I2C 1
+11 ddr_phy DDR PHY
+12 ddr_fclk DDR F clock
+13 trace Trace
+14 counter Counter
+15 eip97 EIP 97
+16 cpu CPU
+
+The following is a list of provided IDs for Armada 3700 South bridge clocks:
+ID Clock name Description
+-----------------------------------
+0 gbe-50 50 MHz parent clock for Gigabit Ethernet
+1 gbe-core parent clock for Gigabit Ethernet core
+2 gbe-125 125 MHz parent clock for Gigabit Ethernet
+3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1
+4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0
+5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1
+6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0
+7 gbe1-core Gigabit Ethernet core port 1
+8 gbe0-core Gigabit Ethernet core port 0
+9 gbe-bm Gigabit Ethernet Buffer Manager
+10 sdio SDIO
+11 usb32-sub2-sys USB 2 clock
+12 usb32-ss-sys USB 3 clock
+13 pcie PCIe controller
+
+Required properties:
+
+- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
+ north bridge block, or
+ "marvell,armada-3700-periph-clock-sb" for the south bridge block
+- reg : must be the register address of North/South Bridge Clock register
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks : list of the parent clock phandle in the following order:
+ TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
+
+
+Example:
+
+nb_perih_clk: nb-periph-clk@13000{
+ compatible = "marvell,armada-3700-periph-clock-nb";
+ reg = <0x13000 0x1000>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+ <&tbg 3>, <&xtalclk>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
new file mode 100644
index 000000000..0ba1d83ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
@@ -0,0 +1,27 @@
+* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provde Time Base Generator clocks which are
+used as parent clocks for the peripheral clocks.
+
+The TBG clock consumer should specify the desired clock by having the
+clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 3700:
+ 0 = TBG A P
+ 1 = TBG B P
+ 2 = TBG A S
+ 3 = TBG B S
+
+Required properties:
+- compatible : shall be "marvell,armada-3700-tbg-clock"
+- reg : must be the register address of North Bridge PLL register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Example:
+
+tbg: tbg@13200 {
+ compatible = "marvell,armada-3700-tbg-clock";
+ reg = <0x13200 0x1000>;
+ clocks = <&xtalclk>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
new file mode 100644
index 000000000..4c0807f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
@@ -0,0 +1,29 @@
+* Xtal Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
+reading the gpio latch register.
+
+This node must be a subnode of the node exposing the register address
+of the GPIO block where the gpio latch is located.
+See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-3700-xtal-clock"
+- #clock-cells : from common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+ output names ("xtal")
+
+Example:
+pinctrl_nb: pinctrl-nb@13800 {
+ compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
+ reg = <0x13800 0x100>, <0x13C00 0x20>;
+
+ xtalclk: xtal-clk {
+ compatible = "marvell,armada-3700-xtal-clock";
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt
new file mode 100644
index 000000000..dff9cdf00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/artpec6.txt
@@ -0,0 +1,41 @@
+* Clock bindings for Axis ARTPEC-6 chip
+
+The bindings are based on the clock provider binding in
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+External clocks:
+----------------
+
+There are two external inputs to the main clock controller which should be
+provided using the common clock bindings.
+- "sys_refclk": External 50 Mhz oscillator (required)
+- "i2s_refclk": Alternate audio reference clock (optional).
+
+Main clock controller
+---------------------
+
+Required properties:
+- #clock-cells: Should be <1>
+ See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
+- compatible: Should be "axis,artpec6-clkctrl"
+- reg: Must contain the base address and length of the system controller
+- clocks: Must contain a phandle entry for each clock in clock-names
+- clock-names: Must include the external oscillator ("sys_refclk"). Optional
+ ones are the audio reference clock ("i2s_refclk") and the audio fractional
+ dividers ("frac_clk0" and "frac_clk1").
+
+Examples:
+
+ext_clk: ext_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+};
+
+clkctrl: clkctrl@f8000000 {
+ #clock-cells = <1>;
+ compatible = "axis,artpec6-clkctrl";
+ reg = <0xf8000000 0x48>;
+ clocks = <&ext_clk>;
+ clock-names = "sys_refclk";
+};
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
new file mode 100644
index 000000000..13f45db3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -0,0 +1,58 @@
+Device Tree Clock bindings for arch-at91
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Slow Clock controller:
+
+Required properties:
+- compatible : shall be one of the following:
+ "atmel,at91sam9x5-sckc",
+ "atmel,sama5d3-sckc",
+ "atmel,sama5d4-sckc" or
+ "microchip,sam9x60-sckc":
+ at91 SCKC (Slow Clock Controller)
+- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0.
+- clocks : shall be the input parent clock phandle for the clock.
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+ provided on XIN.
+
+For example:
+ sckc@fffffe50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffe50 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
+ };
+
+Power Management Controller (PMC):
+
+Required properties:
+- compatible : shall be "atmel,<chip>-pmc", "syscon" or
+ "microchip,sam9x60-pmc"
+ <chip> can be: at91rm9200, at91sam9260, at91sam9261,
+ at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
+ at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
+ sama5d2, sama5d3 or sama5d4.
+- #clock-cells : from common clock binding; shall be set to 2. The first entry
+ is the type of the clock (core, system, peripheral or generated) and the
+ second entry its index as provided by the datasheet
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names: Must include the following entries: "slow_clk", "main_xtal"
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+ provided on XIN.
+
+For example:
+ pmc: pmc@f0018000 {
+ compatible = "atmel,sama5d4-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
+ };
diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
new file mode 100644
index 000000000..aca94fe94
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
@@ -0,0 +1,25 @@
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock(s). This must
+ either reference one clock if only the first clock input is connected or two
+ if both clock inputs are connected. For the later case the clock connected
+ to the first input must be specified first.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ clock@ff000000 {
+ compatible = "adi,axi-clkgen";
+ #clock-cells = <0>;
+ reg = <0xff000000 0x1000>;
+ clocks = <&osc 1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
new file mode 100644
index 000000000..5ffc8df7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
@@ -0,0 +1,25 @@
+Binding for the AXS10X I2S PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "snps,axs10x-i2s-pll-clock"
+- reg : address and length of the I2S PLL register set.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+ pll_clock: pll_clock {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ };
+
+ i2s_clock@100a0 {
+ compatible = "snps,axs10x-i2s-pll-clock";
+ reg = <0x100a0 0x10>;
+ clocks = <&pll_clock>;
+ #clock-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
new file mode 100644
index 000000000..bd4cefbb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit Dividers
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+ responsible for the chip subsystems clocking and resetting. The CCU is
+ connected with an external fixed rate oscillator, which signal is transformed
+ into clocks of various frequencies and then propagated to either individual
+ IP-blocks or to groups of blocks (clock domains). The transformation is done
+ by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
+ later ones are described in this binding. Each clock domain can be also
+ individually reset by using the domain clocks divider configuration
+ registers. Baikal-T1 CCU is logically divided into the next components:
+ 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+ in general can provide any frequency supported by the CCU PLLs).
+ 2) PLLs clocks generators (PLLs).
+ 3) AXI-bus clock dividers (AXI) - described in this binding file.
+ 4) System devices reference clock dividers (SYS) - described in this binding
+ file.
+ which are connected with each other as shown on the next figure:
+
+ +---------------+
+ | Baikal-T1 CCU |
+ | +----+------|- MIPS P5600 cores
+ | +-|PLLs|------|- DDR controller
+ | | +----+ |
+ +----+ | | | | |
+ |XTAL|--|-+ | | +---+-|
+ +----+ | | | +-|AXI|-|- AXI-bus
+ | | | +---+-|
+ | | | |
+ | | +----+---+-|- APB-bus
+ | +-------|SYS|-|- Low-speed Devices
+ | +---+-|- High-speed Devices
+ +---------------+
+
+ Each sub-block is represented as a separate DT node and has an individual
+ driver to be bound with.
+
+ In order to create signals of wide range frequencies the external oscillator
+ output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are
+ then passed over CCU dividers to create signals required for the target clock
+ domain (like AXI-bus or System Device consumers). The dividers have the
+ following structure:
+
+ +--------------+
+ CLKIN --|->+----+ 1|\ |
+ SETCLK--|--|/DIV|->| | |
+ CLKDIV--|--| | | |-|->CLKLOUT
+ LOCK----|--+----+ | | |
+ | |/ |
+ | | |
+ EN------|-----------+ |
+ RST-----|--------------|->RSTOUT
+ +--------------+
+
+ where CLKIN is the reference clock coming either from CCU PLLs or from an
+ external clock oscillator, SETCLK - a command to update the output clock in
+ accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of
+ the output clock stabilization, EN - enable/disable the divider block,
+ RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core
+ peculiarities the dividers may lack of some functionality depicted on the
+ figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding
+ clock provider just doesn't expose either switching functions, or the rate
+ configuration, or both of them.
+
+ The clock dividers, which output clock is then consumed by the SoC individual
+ devices, are united into a single clocks provider called System Devices CCU.
+ Similarly the dividers with output clocks utilized as AXI-bus reference clocks
+ are called AXI-bus CCU. Both of them use the common clock bindings with no
+ custom properties. The list of exported clocks and reset signals can be found
+ in the files: 'include/dt-bindings/clock/bt1-ccu.h' and
+ 'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU
+ are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed
+ to be a children of later one.
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: baikal,bt1-ccu-axi
+
+then:
+ properties:
+ clocks:
+ items:
+ - description: CCU SATA PLL output clock
+ - description: CCU PCIe PLL output clock
+ - description: CCU Ethernet PLL output clock
+
+ clock-names:
+ items:
+ - const: sata_clk
+ - const: pcie_clk
+ - const: eth_clk
+
+else:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock
+ - description: CCU SATA PLL output clock
+ - description: CCU PCIe PLL output clock
+ - description: CCU Ethernet PLL output clock
+
+ clock-names:
+ items:
+ - const: ref_clk
+ - const: sata_clk
+ - const: pcie_clk
+ - const: eth_clk
+
+properties:
+ compatible:
+ enum:
+ - baikal,bt1-ccu-axi
+ - baikal,bt1-ccu-sys
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks: true
+
+ clock-names: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+examples:
+ # AXI-bus Clock Control Unit node:
+ - |
+ #include <dt-bindings/clock/bt1-ccu.h>
+
+ clock-controller@1f04d030 {
+ compatible = "baikal,bt1-ccu-axi";
+ reg = <0x1f04d030 0x030>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ clocks = <&ccu_pll CCU_SATA_PLL>,
+ <&ccu_pll CCU_PCIE_PLL>,
+ <&ccu_pll CCU_ETH_PLL>;
+ clock-names = "sata_clk", "pcie_clk", "eth_clk";
+ };
+ # System Devices Clock Control Unit node:
+ - |
+ #include <dt-bindings/clock/bt1-ccu.h>
+
+ clock-controller@1f04d060 {
+ compatible = "baikal,bt1-ccu-sys";
+ reg = <0x1f04d060 0x0a0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ clocks = <&clk25m>,
+ <&ccu_pll CCU_SATA_PLL>,
+ <&ccu_pll CCU_PCIE_PLL>,
+ <&ccu_pll CCU_ETH_PLL>;
+ clock-names = "ref_clk", "sata_clk", "pcie_clk",
+ "eth_clk";
+ };
+ # Required Clock Control Unit PLL node:
+ - |
+ ccu_pll: clock-controller@1f04d000 {
+ compatible = "baikal,bt1-ccu-pll";
+ reg = <0x1f04d000 0x028>;
+ #clock-cells = <1>;
+
+ clocks = <&clk25m>;
+ clock-names = "ref_clk";
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
new file mode 100644
index 000000000..624984d51
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit PLL
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+ responsible for the chip subsystems clocking and resetting. The CCU is
+ connected with an external fixed rate oscillator, which signal is transformed
+ into clocks of various frequencies and then propagated to either individual
+ IP-blocks or to groups of blocks (clock domains). The transformation is done
+ by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
+ It's logically divided into the next components:
+ 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+ in general can provide any frequency supported by the CCU PLLs).
+ 2) PLLs clocks generators (PLLs) - described in this binding file.
+ 3) AXI-bus clock dividers (AXI).
+ 4) System devices reference clock dividers (SYS).
+ which are connected with each other as shown on the next figure:
+
+ +---------------+
+ | Baikal-T1 CCU |
+ | +----+------|- MIPS P5600 cores
+ | +-|PLLs|------|- DDR controller
+ | | +----+ |
+ +----+ | | | | |
+ |XTAL|--|-+ | | +---+-|
+ +----+ | | | +-|AXI|-|- AXI-bus
+ | | | +---+-|
+ | | | |
+ | | +----+---+-|- APB-bus
+ | +-------|SYS|-|- Low-speed Devices
+ | +---+-|- High-speed Devices
+ +---------------+
+
+ Each CCU sub-block is represented as a separate dts-node and has an
+ individual driver to be bound with.
+
+ In order to create signals of wide range frequencies the external oscillator
+ output is primarily connected to a set of CCU PLLs. There are five PLLs
+ to create a clock for the MIPS P5600 cores, the embedded DDR controller,
+ SATA, Ethernet and PCIe domains. The last three domains though named by the
+ biggest system interfaces in fact include nearly all of the rest SoC
+ peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
+ with an interface wrapper (so called safe PLL' clocks switcher) to simplify
+ the PLL configuration procedure. The PLLs work as depicted on the next
+ diagram:
+
+ +--------------------------+
+ | |
+ +-->+---+ +---+ +---+ | +---+ 0|\
+ CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
+ +---+ +->+---+ +---+ /->+---+ | |--->CLKOUT
+ CLKOD---------C----------------+ 1| |
+ +--------C--------------------------->|/
+ | | ^
+ Rclk-+->+---+ | |
+ CLKR--->|/NR|-+ |
+ +---+ |
+ BYPASS--------------------------------------+
+ BWADJ--->
+
+ where Rclk is the reference clock coming from XTAL, NR - reference clock
+ divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
+ output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
+ the binding supports the PLL dividers configuration in accordance with a
+ requested rate, while bypassing and bandwidth adjustment settings can be
+ added in future if it gets to be necessary.
+
+ The PLLs CLKOUT is then either directly connected with the corresponding
+ clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
+ divider to create a signal required for the clock domain.
+
+ The CCU PLL dts-node uses the common clock bindings with no custom
+ parameters. The list of exported clocks can be found in
+ 'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
+ Baikal-T1 SoC System Controller its DT node is supposed to be a child of
+ later one.
+
+properties:
+ compatible:
+ const: baikal,bt1-ccu-pll
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ description: External reference clock
+ maxItems: 1
+
+ clock-names:
+ const: ref_clk
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Unit PLL node:
+ - |
+ clock-controller@1f04d000 {
+ compatible = "baikal,bt1-ccu-pll";
+ reg = <0x1f04d000 0x028>;
+ #clock-cells = <1>;
+
+ clocks = <&clk25m>;
+ clock-names = "ref_clk";
+ };
+ # Required external oscillator:
+ - |
+ clk25m: clock-oscillator-25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "clk25m";
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
new file mode 100644
index 000000000..228c9313d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/bitmain,bm1880-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain BM1880 Clock Controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+ The Bitmain BM1880 clock controller generates and supplies clock to
+ various peripherals within the SoC.
+
+ This binding uses common clock bindings
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+ compatible:
+ const: bitmain,bm1880-clk
+
+ reg:
+ items:
+ - description: pll registers
+ - description: system registers
+
+ reg-names:
+ items:
+ - const: pll
+ - const: sys
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: osc
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock controller node:
+ - |
+ clk: clock-controller@e8 {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>, <0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ };
+
+ # Example UART controller node that consumes clock generated by the clock controller:
+ - |
+ uart0: serial@58018000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x58018000 0x2000>;
+ clocks = <&clk 45>, <&clk 46>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <0 9 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
new file mode 100644
index 000000000..08543ecbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ const: brcm,brcm2711-dvp
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ dvp: clock@7ef00000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7ef00000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
new file mode 100644
index 000000000..4acfc8f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
@@ -0,0 +1,31 @@
+Broadcom BCM2835 auxiliary peripheral support
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+area controlling clock gating to the peripherals, and providing an IRQ
+status register.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835-aux.h
+- reg: Specifies base physical address and size of the registers
+- clocks: The parent clock phandle
+
+Example:
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ aux: aux@7e215004 {
+ compatible = "brcm,bcm2835-aux";
+ #clock-cells = <1>;
+ reg = <0x7e215000 0x8>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 000000000..9e0b03a65
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,60 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835. There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels. Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible: should be one of the following,
+ "brcm,bcm2711-cprman"
+ "brcm,bcm2835-cprman"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835.h
+- reg: Specifies base physical address and size of the registers
+- clocks: phandles to the parent clocks used as input to the module, in
+ the following order:
+
+ - External oscillator
+ - DSI0 byte clock
+ - DSI0 DDR2 clock
+ - DSI0 DDR clock
+ - DSI1 byte clock
+ - DSI1 DDR2 clock
+ - DSI1 DDR clock
+
+ Only external oscillator is required. The DSI clocks may
+ not be present, in which case their children will be
+ unusable.
+
+Example:
+
+ clk_osc: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
+ };
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ i2c0: i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
new file mode 100644
index 000000000..2ebb10733
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
@@ -0,0 +1,36 @@
+Broadcom BCM53573 ILP clock
+===========================
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+This binding is used for ILP clock (sometimes referred as "slow clock")
+on Broadcom BCM53573 devices using Cortex-A7 CPU.
+
+ILP's rate has to be calculated on runtime and it depends on ALP clock
+which has to be referenced.
+
+This clock is part of PMU (Power Management Unit), a Broadcom's device
+handing power-related aspects. Its node must be sub-node of the PMU
+device.
+
+Required properties:
+- compatible: "brcm,bcm53573-ilp"
+- clocks: has to reference an ALP clock
+- #clock-cells: should be <0>
+- clock-output-names: from common clock bindings, should contain clock
+ name
+
+Example:
+
+pmu@18012000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x18012000 0x00001000>;
+
+ ilp {
+ compatible = "brcm,bcm53573-ilp";
+ clocks = <&alp>;
+ #clock-cells = <0>;
+ clock-output-names = "ilp";
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
new file mode 100644
index 000000000..3e7ca5530
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
@@ -0,0 +1,24 @@
+Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
+
+Required properties:
+- compatible: must be one of:
+ "brcm,bcm3368-clocks"
+ "brcm,bcm6318-clocks"
+ "brcm,bcm6318-ubus-clocks"
+ "brcm,bcm6328-clocks"
+ "brcm,bcm6358-clocks"
+ "brcm,bcm6362-clocks"
+ "brcm,bcm6368-clocks"
+ "brcm,bcm63268-clocks"
+
+- reg: Address and length of the register set
+- #clock-cells: must be <1>
+
+
+Example:
+
+clkctl: clock-controller@10000004 {
+ compatible = "brcm,bcm6328-clocks";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
new file mode 100644
index 000000000..ab730ea0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -0,0 +1,313 @@
+Broadcom iProc Family Clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The iProc clock controller manages clocks that are common to the iProc family.
+An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
+LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+comprises of several leaf clocks
+
+Required properties for a PLL and its leaf clocks:
+
+- compatible:
+ Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on
+Cygnus has a compatible string of "brcm,cygnus-genpll"
+
+- #clock-cells:
+ Have a value of <1> since there are more than 1 leaf clock of a given PLL
+
+- reg:
+ Define the base and range of the I/O address space that contain the iProc
+clock control registers required for the PLL
+
+- clocks:
+ The input parent clock phandle for the PLL. For most iProc PLLs, this is an
+onboard crystal with a fixed rate
+
+- clock-output-names:
+ An ordered list of strings defining the names of the clocks
+
+Example:
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ genpll: genpll {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
+ };
+
+Required properties for ASIU clocks:
+
+ASIU clocks are a special case. These clocks are derived directly from the
+reference clock of the onboard crystal
+
+- compatible:
+ Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU
+clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk"
+
+- #clock-cells:
+ Have a value of <1> since there are more than 1 ASIU clocks
+
+- reg:
+ Define the base and range of the I/O address space that contain the iProc
+clock control registers required for ASIU clocks
+
+- clocks:
+ The input parent clock phandle for the ASIU clock, i.e., the onboard
+crystal
+
+- clock-output-names:
+ An ordered list of strings defining the names of the ASIU clocks
+
+Example:
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ asiu_clks: asiu_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
+ };
+
+Cygnus
+------
+PLL and leaf clock compatible strings for Cygnus are:
+ "brcm,cygnus-armpll"
+ "brcm,cygnus-genpll"
+ "brcm,cygnus-lcpll0"
+ "brcm,cygnus-mipipll"
+ "brcm,cygnus-asiu-clk"
+ "brcm,cygnus-audiopll"
+
+The following table defines the set of PLL/clock index and ID for Cygnus.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-cygnus.h"
+
+ Clock Source (Parent) Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
+ adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
+ pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
+
+ genpll crystal 0 BCM_CYGNUS_GENPLL
+ axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
+ 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
+ ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+ enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
+ audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+ can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
+
+ lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
+ pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+ ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+ sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
+ usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+ smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+ ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+ mipipll crystal 0 BCM_CYGNUS_MIPIPLL
+ ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+ ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
+ ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
+ ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+ ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+ ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+ audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
+ ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
+ ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
+ ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
+
+Hurricane 2
+------
+PLL and leaf clock compatible strings for Hurricane 2 are:
+ "brcm,hr2-armpll"
+
+The following table defines the set of PLL/clock for Hurricane 2:
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+
+Northstar and Northstar Plus
+------
+PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
+ "brcm,nsp-armpll"
+ "brcm,nsp-genpll"
+ "brcm,nsp-lcpll0"
+
+The following table defines the set of PLL/clock index and ID for Northstar and
+Northstar Plus. These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-nsp.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ genpll crystal 0 BCM_NSP_GENPLL
+ phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
+ ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
+ usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
+ iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
+ sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
+ sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
+
+ lcpll0 crystal 0 BCM_NSP_LCPLL0
+ pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+ sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
+ ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
+
+Northstar 2
+-----------
+PLL and leaf clock compatible strings for Northstar 2 are:
+ "brcm,ns2-genpll-scr"
+ "brcm,ns2-genpll-sw"
+ "brcm,ns2-lcpll-ddr"
+ "brcm,ns2-lcpll-ports"
+
+The following table defines the set of PLL/clock index and ID for Northstar 2.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-ns2.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
+ scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
+ fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
+ audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
+ ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
+ ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
+ ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+ genpll_sw crystal 0 BCM_NS2_GENPLL_SW
+ rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
+ 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
+ nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
+ chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
+ port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
+ sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
+
+ lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
+ pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+ ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
+ ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
+ ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
+ ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
+ ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+ lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
+ wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
+ rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
+ ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+ ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+ ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+ ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+
+BCM63138
+--------
+PLL and leaf clock compatible strings for BCM63138 are:
+ "brcm,bcm63138-armpll"
+
+Stingray
+-----------
+PLL and leaf clock compatible strings for Stingray are:
+ "brcm,sr-genpll0"
+ "brcm,sr-genpll1"
+ "brcm,sr-genpll2"
+ "brcm,sr-genpll3"
+ "brcm,sr-genpll4"
+ "brcm,sr-genpll5"
+ "brcm,sr-genpll6"
+
+ "brcm,sr-lcpll0"
+ "brcm,sr-lcpll1"
+ "brcm,sr-lcpll-pcie"
+
+
+The following table defines the set of PLL/clock index and ID for Stingray.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-sr.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+ crmu_ref25m crystal N/A N/A
+
+ genpll0 crystal 0 BCM_SR_GENPLL0
+ clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
+ clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
+ clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
+ clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
+ clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+ clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+ genpll1 crystal 0 BCM_SR_GENPLL1
+ clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
+ clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
+
+ genpll2 crystal 0 BCM_SR_GENPLL2
+ clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
+ clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
+ clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
+ clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
+ clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK
+ clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK
+
+ genpll3 crystal 0 BCM_SR_GENPLL3
+ clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
+ clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
+
+ genpll4 crystal 0 BCM_SR_GENPLL4
+ clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
+ clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
+ clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK
+ clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
+ clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+ genpll5 crystal 0 BCM_SR_GENPLL5
+ clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
+ clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
+ clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
+
+ genpll6 crystal 0 BCM_SR_GENPLL6
+ clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
+
+ lcpll0 crystal 0 BCM_SR_LCPLL0
+ clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
+ clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
+ clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK
+ clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK
+
+ lcpll1 crystal 0 BCM_SR_LCPLL1
+ clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK
+ clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK
+ clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK
+
+ lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
+ clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
new file mode 100644
index 000000000..8e5a7d868
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
@@ -0,0 +1,138 @@
+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs). A CCU is a clock provider that manages
+a set of clock signals. Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+ Shall have a value of the form "brcm,<model>-<which>-ccu",
+ where <model> is a Broadcom SoC model number and <which> is
+ the name of a defined CCU. For example:
+ "brcm,bcm11351-root-ccu"
+ The compatible strings used for each supported SoC family
+ are defined below.
+- reg
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells
+ Shall have value <1>. The permitted clock-specifier values
+ are defined below.
+- clock-output-names
+ Shall be an ordered list of strings defining the names of
+ the clocks provided by the CCU.
+
+Device tree example:
+
+ slave_ccu: slave_ccu {
+ compatible = "brcm,bcm11351-slave-ccu";
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "uartb4";
+ };
+
+ ref_crystal_clk: ref_crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ uart@3e002000 {
+ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+ reg = <0x3e002000 0x1000>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+BCM281XX family
+---------------
+CCU compatible string values for SoCs in the BCM281XX family are:
+ "brcm,bcm11351-root-ccu"
+ "brcm,bcm11351-aon-ccu"
+ "brcm,bcm11351-hub-ccu"
+ "brcm,bcm11351-master-ccu"
+ "brcm,bcm11351-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM281XX family clocks. When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used. These specifiers are defined in:
+ "include/dt-bindings/clock/bcm281xx.h"
+
+ CCU Clock Type Index Specifier
+ --- ----- ---- ----- ---------
+ root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M
+
+ aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER
+ aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC
+ aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR
+
+ hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M
+
+ master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1
+ master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2
+ master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3
+ master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4
+ master dmac peri 4 BCM281XX_MASTER_CCU_DMAC
+ master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC
+ master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M
+ master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M
+
+ slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB
+ slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2
+ slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3
+ slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4
+ slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0
+ slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2
+ slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1
+ slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2
+ slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3
+ slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
+
+
+BCM21664 family
+---------------
+CCU compatible string values for SoCs in the BCM21664 family are:
+ "brcm,bcm21664-root-ccu"
+ "brcm,bcm21664-aon-ccu"
+ "brcm,bcm21664-master-ccu"
+ "brcm,bcm21664-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM21664 family clocks. When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used. These specifiers are defined in:
+ "include/dt-bindings/clock/bcm21664.h"
+
+ CCU Clock Type Index Specifier
+ --- ----- ---- ----- ---------
+ root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M
+
+ aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER
+
+ master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1
+ master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2
+ master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3
+ master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4
+ master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP
+ master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP
+ master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP
+ master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP
+
+ slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB
+ slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2
+ slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3
+ slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4
+ slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1
+ slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2
+ slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3
+ slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4
diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml
new file mode 100644
index 000000000..a34cbf3c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/calxeda.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Clock bindings for Calxeda highbank platform
+
+description: |
+ This binding covers the Calxeda SoC internal peripheral and bus clocks
+ as used by peripherals. The clocks live inside the "system register"
+ region of the SoC, so are typically presented as children of an
+ "hb-sregs" node.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - calxeda,hb-pll-clock
+ - calxeda,hb-a9periph-clock
+ - calxeda,hb-a9bus-clock
+ - calxeda,hb-emmc-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - clocks
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ sregs@3fffc000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0x3fffc000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333000>;
+ };
+
+ ddrpll: ddrpll@108 {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x108>;
+ };
+
+ a9pll: a9pll@100 {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x100>;
+ };
+
+ a9periphclk: a9periphclk@104 {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-a9periph-clock";
+ clocks = <&a9pll>;
+ reg = <0x104>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
new file mode 100644
index 000000000..59de12564
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the clock portion of the
+ driver.
+
+ Also see these documents for generic binding information:
+ [1] Clock : ../clock/clock-bindings.txt
+
+ And these for relevant defines:
+ [2] include/dt-bindings/clock/lochnagar.h
+
+ This binding must be part of the Lochnagar MFD binding:
+ [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar1-clk
+ - cirrus,lochnagar2-clk
+
+ '#clock-cells':
+ description:
+ The first cell indicates the clock number, see [2] for available
+ clocks and [1].
+ const: 1
+
+ clock-names:
+ items:
+ enum:
+ - ln-cdc-clkout # Output clock from CODEC card.
+ - ln-dsp-clkout # Output clock from DSP card.
+ - ln-gf-mclk1 # Optional input clock from host system.
+ - ln-gf-mclk2 # Optional input clock from host system.
+ - ln-gf-mclk3 # Optional input clock from host system.
+ - ln-gf-mclk4 # Optional input clock from host system.
+ - ln-psia1-mclk # Optional input clock from external connector.
+ - ln-psia2-mclk # Optional input clock from external connector.
+ - ln-spdif-mclk # Optional input clock from SPDIF.
+ - ln-spdif-clkout # Optional input clock from SPDIF.
+ - ln-adat-mclk # Optional input clock from ADAT.
+ - ln-pmic-32k # On board fixed clock.
+ - ln-clk-12m # On board fixed clock.
+ - ln-clk-11m # On board fixed clock.
+ - ln-clk-24m # On board fixed clock.
+ - ln-clk-22m # On board fixed clock.
+ - ln-clk-8m # On board fixed clock.
+ - ln-usb-clk-24m # On board fixed clock.
+ - ln-usb-clk-12m # On board fixed clock.
+ minItems: 1
+ maxItems: 19
+
+ clocks: true
+ assigned-clocks: true
+ assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - '#clock-cells'
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
new file mode 100644
index 000000000..6030afb10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -0,0 +1,103 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
+binding described here is applicable to all SoCs in Exynos family.
+
+Required Properties:
+
+- compatible: should be one of the following:
+ - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
+ - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
+ SoCs.
+ - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
+ SoCs.
+ - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
+ SoCs.
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+ - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
+ is used if not specified.
+ - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
+ is used if not specified.
+ - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+ specified.
+ - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
+ not specified.
+ - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not
+ specified.
+
+- clock-names: Aliases for the above clocks. They should be "pll_ref",
+ "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
+
+Optional Properties:
+
+ - power-domains: a phandle to respective power domain node as described by
+ generic PM domain bindings (see power/power_domain.txt for more
+ information).
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+Provided clocks:
+
+Clock ID SoC (if specific)
+-----------------------------------------------
+
+mout_audss 0
+mout_i2s 1
+dout_srp 2
+dout_aud_bus 3
+dout_i2s 4
+srp_clk 5
+i2s_bus 6
+sclk_i2s 7
+pcm_bus 8
+sclk_pcm 9
+adma 10 Exynos5420
+
+Example 1: An example of a clock controller node using the default input
+ clock names is listed below.
+
+clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5250-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+};
+
+Example 2: An example of a clock controller node with the input clocks
+ specified.
+
+clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5250-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
+ <&ext_i2s_clk>;
+ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
+};
+
+Example 3: I2S controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+i2s0: i2s@3830000 {
+ compatible = "samsung,i2s-v5";
+ reg = <0x03830000 0x100>;
+ dmas = <&pdma0 10
+ &pdma0 9
+ &pdma0 8>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
+ "mout_audss", "mout_i2s";
+};
diff --git a/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt b/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt
new file mode 100644
index 000000000..4208886d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt
@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible : "ti,palmas-clk32kg" for clk32kg clock
+ "ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+ enable/disable of clocks. The external enable input pins ENABLE1,
+ ENABLE2 and NSLEEP. The valid values for the external pins are:
+ PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+ PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+ PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+ Option 0 or missing this property means the clock is enabled/disabled
+ via register access and these pins do not have any control.
+ The macros of external control pins for DTS is defined at
+ dt-bindings/mfd/palmas.h
+
+Example:
+ #include <dt-bindings/mfd/palmas.h>
+ ...
+ palmas: tps65913@58 {
+ ...
+ clk32kg: palmas_clk32k@0 {
+ compatible = "ti,palmas-clk32kg";
+ #clock-cells = <0>;
+ ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
new file mode 100644
index 000000000..f6272dcd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
@@ -0,0 +1,53 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and compatible SoCs.
+
+Required Properties:
+
+- compatible: should be "samsung,s5pv210-audss-clock".
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+ - hclk: AHB bus clock of the Audio Subsystem.
+ - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
+ not specified (i.e. xusbxti is used for PLL reference), it is fixed to
+ a clock named "xxti".
+ - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
+ - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
+ specified, it is fixed to a clock named "iiscdclk0".
+ - sclk_audio0: Audio bus clock, parent of mout_i2s.
+
+- clock-names: Aliases for the above clocks. They should be "hclk",
+ "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
+tree sources.
+
+Example: Clock controller node.
+
+ clk_audss: clock-controller@c0900000 {
+ compatible = "samsung,s5pv210-audss-clock";
+ reg = <0xc0900000 0x1000>;
+ #clock-cells = <1>;
+ clock-names = "hclk", "xxti",
+ "fout_epll", "sclk_audio0";
+ clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+ <&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
+ };
+
+Example: I2S controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ i2s0: i2s@3830000 {
+ /* ... */
+ clock-names = "iis", "i2s_opclk0",
+ "i2s_opclk1";
+ clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_DOUT_AUD_BUS>;
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
new file mode 100644
index 000000000..f2ea53832
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -0,0 +1,186 @@
+This binding is a work-in-progress, and are based on some experimental
+work by benh[1].
+
+Sources of clock signal can be represented by any node in the device
+tree. Those nodes are designated as clock providers. Clock consumer
+nodes use a phandle and clock specifier pair to connect clock provider
+outputs to clock inputs. Similar to the gpio specifiers, a clock
+specifier is an array of zero, one or more cells identifying the clock
+output on a device. The length of a clock specifier is defined by the
+value of a #clock-cells property in the clock provider node.
+
+[1] https://patchwork.ozlabs.org/patch/31551/
+
+==Clock providers==
+
+Required properties:
+#clock-cells: Number of cells in a clock specifier; Typically 0 for nodes
+ with a single clock output and 1 for nodes with multiple
+ clock outputs.
+
+Optional properties:
+clock-output-names: Recommended to be a list of strings of clock output signal
+ names indexed by the first cell in the clock specifier.
+ However, the meaning of clock-output-names is domain
+ specific to the clock provider, and is only provided to
+ encourage using the same meaning for the majority of clock
+ providers. This format may not work for clock providers
+ using a complex clock specifier format. In those cases it
+ is recommended to omit this property and create a binding
+ specific names property.
+
+ Clock consumer nodes must never directly reference
+ the provider's clock-output-names property.
+
+For example:
+
+ oscillator {
+ #clock-cells = <1>;
+ clock-output-names = "ckil", "ckih";
+ };
+
+- this node defines a device with two clock outputs, the first named
+ "ckil" and the second named "ckih". Consumer nodes always reference
+ clocks by index. The names should reflect the clock output signal
+ names for the device.
+
+clock-indices: If the identifying number for the clocks in the node
+ is not linear from zero, then this allows the mapping of
+ identifiers into the clock-output-names array.
+
+For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
+
+ oscillator {
+ compatible = "myclocktype";
+ #clock-cells = <1>;
+ clock-indices = <1>, <3>;
+ clock-output-names = "clka", "clkb";
+ }
+
+ This ensures we do not have any empty strings in clock-output-names
+
+
+==Clock consumers==
+
+Required properties:
+clocks: List of phandle and clock specifier pairs, one pair
+ for each clock input to the device. Note: if the
+ clock provider specifies '0' for #clock-cells, then
+ only the phandle portion of the pair will appear.
+
+Optional properties:
+clock-names: List of clock input name strings sorted in the same
+ order as the clocks property. Consumers drivers
+ will use clock-names to match clock input names
+ with clocks specifiers.
+clock-ranges: Empty property indicating that child nodes can inherit named
+ clocks from this node. Useful for bus nodes to provide a
+ clock to their children.
+
+For example:
+
+ device {
+ clocks = <&osc 1>, <&ref 0>;
+ clock-names = "baud", "register";
+ };
+
+
+This represents a device with two clock inputs, named "baud" and "register".
+The baud clock is connected to output 1 of the &osc device, and the register
+clock is connected to output 0 of the &ref.
+
+==Example==
+
+ /* external oscillator */
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32678>;
+ clock-output-names = "osc";
+ };
+
+ /* phase-locked-loop device, generates a higher frequency clock
+ * from the external oscillator reference */
+ pll: pll@4c000 {
+ compatible = "vendor,some-pll-interface"
+ #clock-cells = <1>;
+ clocks = <&osc 0>;
+ clock-names = "ref";
+ reg = <0x4c000 0x1000>;
+ clock-output-names = "pll", "pll-switched";
+ };
+
+ /* UART, using the low frequency oscillator for the baud clock,
+ * and the high frequency switched PLL output for register
+ * clocking */
+ uart@a000 {
+ compatible = "fsl,imx-uart";
+ reg = <0xa000 0x1000>;
+ interrupts = <33>;
+ clocks = <&osc 0>, <&pll 1>;
+ clock-names = "baud", "register";
+ };
+
+This DT fragment defines three devices: an external oscillator to provide a
+low-frequency reference clock, a PLL device to generate a higher frequency
+clock signal, and a UART.
+
+* The oscillator is fixed-frequency, and provides one clock output, named "osc".
+* The PLL is both a clock provider and a clock consumer. It uses the clock
+ signal generated by the external oscillator, and provides two output signals
+ ("pll" and "pll-switched").
+* The UART has its baud clock connected the external oscillator and its
+ register clock connected to the PLL clock (the "pll-switched" signal)
+
+==Assigned clock parents and rates==
+
+Some platforms may require initial configuration of default parent clocks
+and clock frequencies. Such a configuration can be specified in a device tree
+node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
+properties. The assigned-clock-parents property should contain a list of parent
+clocks in the form of a phandle and clock specifier pair and the
+assigned-clock-rates property should contain a list of frequencies in Hz. Both
+these properties should correspond to the clocks listed in the assigned-clocks
+property.
+
+To skip setting parent or rate of a clock its corresponding entry should be
+set to 0, or can be omitted if it is not followed by any non-zero entry.
+
+ uart@a000 {
+ compatible = "fsl,imx-uart";
+ reg = <0xa000 0x1000>;
+ ...
+ clocks = <&osc 0>, <&pll 1>;
+ clock-names = "baud", "register";
+
+ assigned-clocks = <&clkcon 0>, <&pll 2>;
+ assigned-clock-parents = <&pll 2>;
+ assigned-clock-rates = <0>, <460800>;
+ };
+
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
+the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+
+Configuring a clock's parent and rate through the device node that consumes
+the clock can be done only for clocks that have a single user. Specifying
+conflicting parent or rate configuration in multiple consumer nodes for
+a shared clock is forbidden.
+
+Configuration of common clocks, which affect multiple consumer devices can
+be similarly specified in the clock provider node.
+
+==Protected clocks==
+
+Some platforms or firmwares may not fully expose all the clocks to the OS, such
+as in situations where those clks are used by drivers running in ARM secure
+execution levels. Such a configuration can be specified in device tree with the
+protected-clocks property in the form of a clock specifier list. This property should
+only be specified in the node that is providing the clocks being protected:
+
+ clock-controller@a000f000 {
+ compatible = "vendor,clk95;
+ reg = <0xa000f000 0x1000>
+ #clocks-cells = <1>;
+ ...
+ protected-clocks = <UART3_CLK>, <SPI5_CLK>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
new file mode 100644
index 000000000..f1bd53f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible : Shall contain "cirrus,ep7209-clk".
+- reg : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+ clks: clks@80000000 {
+ #clock-cells = <1>;
+ compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
+ reg = <0x80000000 0xc000>;
+ startup-frequency = <73728000>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
new file mode 100644
index 000000000..54e6df0be
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
@@ -0,0 +1,22 @@
+CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+Required properties:
+
+- compatible: "cirrus,cs2000-cp"
+- reg: The chip select number on the I2C bus
+- clocks: common clock binding for CLK_IN, XTI/REF_CLK
+- clock-names: CLK_IN : clk_in, XTI/REF_CLK : ref_clk
+- #clock-cells: must be <0>
+
+Example:
+
+&i2c2 {
+ ...
+ cs2000: clk_multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&rcar_sound 0>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
new file mode 100644
index 000000000..54d6d1358
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
@@ -0,0 +1,55 @@
+* Clock and reset bindings for CSR atlas7
+
+Required properties:
+- compatible: Should be "sirf,atlas7-car"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- #reset-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
+
+The reset consumer should specify the desired reset by having the reset
+ID in its "reset" phandle cell.
+The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
+
+Examples: Clock and reset controller node:
+
+car: clock-controller@18620000 {
+ compatible = "sirf,atlas7-car";
+ reg = <0x18620000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
+
+Examples: Consumers using clock or reset:
+
+timer@10dc0000 {
+ compatible = "sirf,macro-tick";
+ reg = <0x10dc0000 0x1000>;
+ clocks = <&car 54>;
+ interrupts = <0 0 0>,
+ <0 1 0>,
+ <0 2 0>,
+ <0 49 0>,
+ <0 50 0>,
+ <0 51 0>;
+};
+
+uart1: uart@18020000 {
+ cell-index = <1>;
+ compatible = "sirf,macro-uart";
+ reg = <0x18020000 0x1000>;
+ clocks = <&clks 95>;
+ interrupts = <0 18 0>;
+ fifosize = <32>;
+};
+
+vpp@13110000 {
+ compatible = "sirf,prima2-vpp";
+ reg = <0x13110000 0x10000>;
+ interrupts = <0 31 0>;
+ clocks = <&car 85>;
+ resets = <&car 29>;
+};
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
new file mode 100644
index 000000000..217871f48
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals. These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID Clock
+-------------
+0 AXI bus clock
+1 GPU clock
+2 VMeta clock
+3 LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+ Control 0 register. This will cover that register, as well as the
+ Core PLL and Clock Divider Control 1 register. Thus, it will have
+ a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@64 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/efm32-clock.txt b/Documentation/devicetree/bindings/clock/efm32-clock.txt
new file mode 100644
index 000000000..263d293f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/efm32-clock.txt
@@ -0,0 +1,11 @@
+* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
+
+Required properties:
+- compatible: Should be "efm32gg,cmu"
+- reg: Base address and length of the register set
+- interrupts: Interrupt used by the CMU
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock ID in
+its "clocks" phandle cell. The header efm32-clk.h contains a list of available
+IDs.
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
new file mode 100644
index 000000000..7441ed519
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -0,0 +1,57 @@
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+ - "samsung,exynos3250-cmu-dmc" - controller compatible with
+ Exynos3250 SoC for Dynamic Memory Controller domain.
+ - "samsung,exynos3250-cmu-isp" - ISP block clock controller compatible
+ with Exynos3250 SOC
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: Examples of clock controller nodes are listed below.
+
+ cmu: clock-controller@10030000 {
+ compatible = "samsung,exynos3250-cmu";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_dmc: clock-controller@105c0000 {
+ compatible = "samsung,exynos3250-cmu-dmc";
+ reg = <0x105C0000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_isp: clock-controller@10048000 {
+ compatible = "samsung,exynos3250-cmu-isp";
+ reg = <0x10048000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 109 0>;
+ clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
new file mode 100644
index 000000000..17bb11365
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -0,0 +1,86 @@
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+ - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
+Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP)
+subsystem. Registers for those clocks are located in the ISP power domain.
+Because those registers are also located in a different memory region than
+the main clock controller, a separate clock controller has to be defined for
+handling them.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos4412-isp-clock".
+
+- reg: physical base address of the ISP clock controller and length of memory
+ mapped region.
+
+- #clock-cells: should be 1.
+
+- clocks: list of the clock controller input clock identifiers,
+ from common clock bindings, should point to CLK_ACLK200 and
+ CLK_ACLK400_MCUISP clocks from the main clock controller.
+
+- clock-names: list of the clock controller input clock names,
+ as described in clock-bindings.txt, should be "aclk200" and
+ "aclk400_mcuisp".
+
+- power-domains: a phandle to ISP power domain node as described by
+ generic PM domain bindings.
+
+Example 3: The clock controllers bindings for Exynos4412 SoCs.
+
+ clock: clock-controller@10030000 {
+ compatible = "samsung,exynos4412-clock";
+ reg = <0x10030000 0x18000>;
+ #clock-cells = <1>;
+ };
+
+ isp_clock: clock-controller@10048000 {
+ compatible = "samsung,exynos4412-isp-clock";
+ reg = <0x10048000 0x1000>;
+ #clock-cells = <1>;
+ power-domains = <&pd_isp>;
+ clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
+ clock-names = "aclk200", "aclk400_mcuisp";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
new file mode 100644
index 000000000..aff266a12
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -0,0 +1,41 @@
+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
new file mode 100644
index 000000000..c79d31f7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
@@ -0,0 +1,190 @@
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+ 1) "samsung,exynos5260-clock-top"
+ 2) "samsung,exynos5260-clock-peri"
+ 3) "samsung,exynos5260-clock-egl"
+ 4) "samsung,exynos5260-clock-kfc"
+ 5) "samsung,exynos5260-clock-g2d"
+ 6) "samsung,exynos5260-clock-mif"
+ 7) "samsung,exynos5260-clock-mfc"
+ 8) "samsung,exynos5260-clock-g3d"
+ 9) "samsung,exynos5260-clock-fsys"
+ 10) "samsung,exynos5260-clock-aud"
+ 11) "samsung,exynos5260-clock-isp"
+ 12) "samsung,exynos5260-clock-gscl"
+ 13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+ the given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+ to the given clock controller.
+
+Input clocks for top clock controller:
+ - fin_pll
+ - dout_mem_pll
+ - dout_bus_pll
+ - dout_media_pll
+
+Input clocks for peri clock controller:
+ - fin_pll
+ - ioclk_pcm_extclk
+ - ioclk_i2s_cdclk
+ - ioclk_spdif_extclk
+ - phyclk_hdmi_phy_ref_cko
+ - dout_aclk_peri_66
+ - dout_sclk_peri_uart0
+ - dout_sclk_peri_uart1
+ - dout_sclk_peri_uart2
+ - dout_sclk_peri_spi0_b
+ - dout_sclk_peri_spi1_b
+ - dout_sclk_peri_spi2_b
+ - dout_aclk_peri_aud
+ - dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+ - fin_pll
+ - dout_bus_pll
+
+Input clocks for kfc clock controller:
+ - fin_pll
+ - dout_media_pll
+
+Input clocks for g2d clock controller:
+ - fin_pll
+ - dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+ - fin_pll
+
+Input clocks for mfc clock controller:
+ - fin_pll
+ - dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+ - fin_pll
+
+Input clocks for fsys clock controller:
+ - fin_pll
+ - phyclk_usbhost20_phy_phyclock
+ - phyclk_usbhost20_phy_freeclk
+ - phyclk_usbhost20_phy_clk48mohci
+ - phyclk_usbdrd30_udrd30_pipe_pclk
+ - phyclk_usbdrd30_udrd30_phyclock
+ - dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+ - fin_pll
+ - fout_aud_pll
+ - ioclk_i2s_cdclk
+ - ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+ - fin_pll
+ - dout_aclk_isp1_266
+ - dout_aclk_isp1_400
+ - mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+ - fin_pll
+ - dout_aclk_gscl_400
+ - dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+ - fin_pll
+ - phyclk_dptx_phy_ch3_txd_clk
+ - phyclk_dptx_phy_ch2_txd_clk
+ - phyclk_dptx_phy_ch1_txd_clk
+ - phyclk_dptx_phy_ch0_txd_clk
+ - phyclk_hdmi_phy_tmds_clko
+ - phyclk_hdmi_phy_ref_clko
+ - phyclk_hdmi_phy_pixel_clko
+ - phyclk_hdmi_link_o_tmds_clkhi
+ - phyclk_mipi_dphy_4l_m_txbyte_clkhs
+ - phyclk_dptx_phy_o_ref_clk_24m
+ - phyclk_dptx_phy_clk_div2
+ - phyclk_mipi_dphy_4l_m_rxclkesc0
+ - phyclk_hdmi_phy_ref_cko
+ - ioclk_spdif_extclk
+ - dout_aclk_peri_aud
+ - dout_aclk_disp_222
+ - dout_sclk_disp_pixel
+ - dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock_mfc: clock-controller@11090000 {
+ compatible = "samsung,exynos5260-clock-mfc";
+ clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+ clock-names = "fin_pll", "dout_aclk_mfc_333";
+ reg = <0x11090000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the
+ peri clock controller. Refer to the standard clock bindings for
+ information about 'clocks' and 'clock-names' property.
+
+ serial@12c00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 146 0>;
+ clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
new file mode 100644
index 000000000..217beb27c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
@@ -0,0 +1,50 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+- clocks: should contain an entry specifying the root clock from external
+ oscillator supplied through XXTI or XusbXTI pin. This clock should be
+ defined using standard clock bindings with "fin_pll" clock-output-name.
+ That clock is being passed internally to the 9 PLLs.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ fin_pll: xxti {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5410-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@12c20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
new file mode 100644
index 000000000..717a7b153
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -0,0 +1,42 @@
+* Samsung Exynos5420 Clock Controller
+
+The Exynos5420 clock controller generates and supplies clock to various
+controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
+ - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5420-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
new file mode 100644
index 000000000..183c327a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -0,0 +1,507 @@
+* Samsung Exynos5433 CMU (Clock Management Units)
+
+The Exynos5433 clock controller generates and supplies clock to various
+controllers within the Exynos5433 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP
+ which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
+ domains and bus clocks.
+ - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF
+ which generates clocks for LLI (Low Latency Interface) IP.
+ - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF
+ which generates clocks for DRAM Memory Controller domain.
+ - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
+ which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
+ - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
+ which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
+ - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
+ which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
+ - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D
+ which generates clocks for G2D/MDMA IPs.
+ - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP
+ which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
+ - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD
+ which generates clocks for Cortex-A5/BUS/AUDIO clocks.
+ - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
+ and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
+ which generates global data buses clock and global peripheral buses clock.
+ - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D
+ which generates clocks for 3D Graphics Engine IP.
+ - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL
+ which generates clocks for GSCALER IPs.
+ - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
+ which generates clocks for Cortex-A53 Quad-core processor.
+ - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
+ which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
+ L2 cache controller.
+ - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
+ which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
+ - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC
+ which generates clocks for MFC(Multi-Format Codec) IP.
+ - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
+ which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
+ - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
+ which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
+ - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
+ which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
+ IPs.
+ - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
+ which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
+ - "samsung,exynos5433-cmu-imem" - clock controller compatible for CMU_IMEM
+ which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+- clocks: list of the clock controller input clock identifiers,
+ from common clock bindings. Please refer the next section
+ to find the input clocks for a given controller.
+
+- clock-names: list of the clock controller input clock names,
+ as described in clock-bindings.txt.
+
+ Input clocks for top clock controller:
+ - oscclk
+ - sclk_mphy_pll
+ - sclk_mfc_pll
+ - sclk_bus_pll
+
+ Input clocks for cpif clock controller:
+ - oscclk
+
+ Input clocks for mif clock controller:
+ - oscclk
+ - sclk_mphy_pll
+
+ Input clocks for fsys clock controller:
+ - oscclk
+ - sclk_ufs_mphy
+ - aclk_fsys_200
+ - sclk_pcie_100_fsys
+ - sclk_ufsunipro_fsys
+ - sclk_mmc2_fsys
+ - sclk_mmc1_fsys
+ - sclk_mmc0_fsys
+ - sclk_usbhost30_fsys
+ - sclk_usbdrd30_fsys
+
+ Input clocks for g2d clock controller:
+ - oscclk
+ - aclk_g2d_266
+ - aclk_g2d_400
+
+ Input clocks for disp clock controller:
+ - oscclk
+ - sclk_dsim1_disp
+ - sclk_dsim0_disp
+ - sclk_dsd_disp
+ - sclk_decon_tv_eclk_disp
+ - sclk_decon_vclk_disp
+ - sclk_decon_eclk_disp
+ - sclk_decon_tv_vclk_disp
+ - aclk_disp_333
+
+ Input clocks for audio clock controller:
+ - oscclk
+ - fout_aud_pll
+
+ Input clocks for bus0 clock controller:
+ - aclk_bus0_400
+
+ Input clocks for bus1 clock controller:
+ - aclk_bus1_400
+
+ Input clocks for bus2 clock controller:
+ - oscclk
+ - aclk_bus2_400
+
+ Input clocks for g3d clock controller:
+ - oscclk
+ - aclk_g3d_400
+
+ Input clocks for gscl clock controller:
+ - oscclk
+ - aclk_gscl_111
+ - aclk_gscl_333
+
+ Input clocks for apollo clock controller:
+ - oscclk
+ - sclk_bus_pll_apollo
+
+ Input clocks for atlas clock controller:
+ - oscclk
+ - sclk_bus_pll_atlas
+
+ Input clocks for mscl clock controller:
+ - oscclk
+ - sclk_jpeg_mscl
+ - aclk_mscl_400
+
+ Input clocks for mfc clock controller:
+ - oscclk
+ - aclk_mfc_400
+
+ Input clocks for hevc clock controller:
+ - oscclk
+ - aclk_hevc_400
+
+ Input clocks for isp clock controller:
+ - oscclk
+ - aclk_isp_dis_400
+ - aclk_isp_400
+
+ Input clocks for cam0 clock controller:
+ - oscclk
+ - aclk_cam0_333
+ - aclk_cam0_400
+ - aclk_cam0_552
+
+ Input clocks for cam1 clock controller:
+ - oscclk
+ - sclk_isp_uart_cam1
+ - sclk_isp_spi1_cam1
+ - sclk_isp_spi0_cam1
+ - aclk_cam1_333
+ - aclk_cam1_400
+ - aclk_cam1_552
+
+ Input clocks for imem clock controller:
+ - oscclk
+ - aclk_imem_sssx_266
+ - aclk_imem_266
+ - aclk_imem_200
+
+Optional properties:
+ - power-domains: a phandle to respective power domain node as described by
+ generic PM domain bindings (see power/power_domain.txt for more
+ information).
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5433.h header and can be used in device
+tree sources.
+
+Example 1: Examples of 'oscclk' source clock node are listed below.
+
+ xxti: xxti {
+ compatible = "fixed-clock";
+ clock-output-names = "oscclk";
+ #clock-cells = <0>;
+ };
+
+Example 2: Examples of clock controller nodes are listed below.
+
+ cmu_top: clock-controller@10030000 {
+ compatible = "samsung,exynos5433-cmu-top";
+ reg = <0x10030000 0x0c04>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_mphy_pll",
+ "sclk_mfc_pll",
+ "sclk_bus_pll";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+ <&cmu_mif CLK_SCLK_MFC_PLL>,
+ <&cmu_mif CLK_SCLK_BUS_PLL>;
+ };
+
+ cmu_cpif: clock-controller@10fc0000 {
+ compatible = "samsung,exynos5433-cmu-cpif";
+ reg = <0x10fc0000 0x0c04>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk";
+ clocks = <&xxti>;
+ };
+
+ cmu_mif: clock-controller@105b0000 {
+ compatible = "samsung,exynos5433-cmu-mif";
+ reg = <0x105b0000 0x100c>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_mphy_pll";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_MPHY_PLL>;
+ };
+
+ cmu_peric: clock-controller@14c80000 {
+ compatible = "samsung,exynos5433-cmu-peric";
+ reg = <0x14c80000 0x0b08>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peris: clock-controller@10040000 {
+ compatible = "samsung,exynos5433-cmu-peris";
+ reg = <0x10040000 0x0b20>;
+ #clock-cells = <1>;
+ };
+
+ cmu_fsys: clock-controller@156e0000 {
+ compatible = "samsung,exynos5433-cmu-fsys";
+ reg = <0x156e0000 0x0b04>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_ufs_mphy",
+ "aclk_fsys_200",
+ "sclk_pcie_100_fsys",
+ "sclk_ufsunipro_fsys",
+ "sclk_mmc2_fsys",
+ "sclk_mmc1_fsys",
+ "sclk_mmc0_fsys",
+ "sclk_usbhost30_fsys",
+ "sclk_usbdrd30_fsys";
+ clocks = <&xxti>,
+ <&cmu_cpif CLK_SCLK_UFS_MPHY>,
+ <&cmu_top CLK_ACLK_FSYS_200>,
+ <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+ <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+ <&cmu_top CLK_SCLK_MMC2_FSYS>,
+ <&cmu_top CLK_SCLK_MMC1_FSYS>,
+ <&cmu_top CLK_SCLK_MMC0_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+ };
+
+ cmu_g2d: clock-controller@12460000 {
+ compatible = "samsung,exynos5433-cmu-g2d";
+ reg = <0x12460000 0x0b08>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_g2d_266",
+ "aclk_g2d_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_G2D_266>,
+ <&cmu_top CLK_ACLK_G2D_400>;
+ power-domains = <&pd_g2d>;
+ };
+
+ cmu_disp: clock-controller@13b90000 {
+ compatible = "samsung,exynos5433-cmu-disp";
+ reg = <0x13b90000 0x0c04>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_dsim1_disp",
+ "sclk_dsim0_disp",
+ "sclk_dsd_disp",
+ "sclk_decon_tv_eclk_disp",
+ "sclk_decon_vclk_disp",
+ "sclk_decon_eclk_disp",
+ "sclk_decon_tv_vclk_disp",
+ "aclk_disp_333";
+ clocks = <&xxti>,
+ <&cmu_mif CLK_SCLK_DSIM1_DISP>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_mif CLK_SCLK_DSD_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+ <&cmu_mif CLK_ACLK_DISP_333>;
+ power-domains = <&pd_disp>;
+ };
+
+ cmu_aud: clock-controller@114c0000 {
+ compatible = "samsung,exynos5433-cmu-aud";
+ reg = <0x114c0000 0x0b04>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "fout_aud_pll";
+ clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
+ power-domains = <&pd_aud>;
+ };
+
+ cmu_bus0: clock-controller@13600000 {
+ compatible = "samsung,exynos5433-cmu-bus0";
+ reg = <0x13600000 0x0b04>;
+ #clock-cells = <1>;
+
+ clock-names = "aclk_bus0_400";
+ clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+ };
+
+ cmu_bus1: clock-controller@14800000 {
+ compatible = "samsung,exynos5433-cmu-bus1";
+ reg = <0x14800000 0x0b04>;
+ #clock-cells = <1>;
+
+ clock-names = "aclk_bus1_400";
+ clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+ };
+
+ cmu_bus2: clock-controller@13400000 {
+ compatible = "samsung,exynos5433-cmu-bus2";
+ reg = <0x13400000 0x0b04>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_bus2_400";
+ clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+ };
+
+ cmu_g3d: clock-controller@14aa0000 {
+ compatible = "samsung,exynos5433-cmu-g3d";
+ reg = <0x14aa0000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_g3d_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+ power-domains = <&pd_g3d>;
+ };
+
+ cmu_gscl: clock-controller@13cf0000 {
+ compatible = "samsung,exynos5433-cmu-gscl";
+ reg = <0x13cf0000 0x0b10>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_gscl_111",
+ "aclk_gscl_333";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+ power-domains = <&pd_gscl>;
+ };
+
+ cmu_apollo: clock-controller@11900000 {
+ compatible = "samsung,exynos5433-cmu-apollo";
+ reg = <0x11900000 0x1088>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "sclk_bus_pll_apollo";
+ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+ };
+
+ cmu_atlas: clock-controller@11800000 {
+ compatible = "samsung,exynos5433-cmu-atlas";
+ reg = <0x11800000 0x1088>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "sclk_bus_pll_atlas";
+ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+ };
+
+ cmu_mscl: clock-controller@105d0000 {
+ compatible = "samsung,exynos5433-cmu-mscl";
+ reg = <0x105d0000 0x0b10>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_jpeg_mscl",
+ "aclk_mscl_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_top CLK_ACLK_MSCL_400>;
+ power-domains = <&pd_mscl>;
+ };
+
+ cmu_mfc: clock-controller@15280000 {
+ compatible = "samsung,exynos5433-cmu-mfc";
+ reg = <0x15280000 0x0b08>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_mfc_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+ power-domains = <&pd_mfc>;
+ };
+
+ cmu_hevc: clock-controller@14f80000 {
+ compatible = "samsung,exynos5433-cmu-hevc";
+ reg = <0x14f80000 0x0b08>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk", "aclk_hevc_400";
+ clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+ power-domains = <&pd_hevc>;
+ };
+
+ cmu_isp: clock-controller@146d0000 {
+ compatible = "samsung,exynos5433-cmu-isp";
+ reg = <0x146d0000 0x0b0c>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_isp_dis_400",
+ "aclk_isp_400";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_ISP_DIS_400>,
+ <&cmu_top CLK_ACLK_ISP_400>;
+ power-domains = <&pd_isp>;
+ };
+
+ cmu_cam0: clock-controller@120d0000 {
+ compatible = "samsung,exynos5433-cmu-cam0";
+ reg = <0x120d0000 0x0b0c>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_cam0_333",
+ "aclk_cam0_400",
+ "aclk_cam0_552";
+ clocks = <&xxti>,
+ <&cmu_top CLK_ACLK_CAM0_333>,
+ <&cmu_top CLK_ACLK_CAM0_400>,
+ <&cmu_top CLK_ACLK_CAM0_552>;
+ power-domains = <&pd_cam0>;
+ };
+
+ cmu_cam1: clock-controller@145d0000 {
+ compatible = "samsung,exynos5433-cmu-cam1";
+ reg = <0x145d0000 0x0b08>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "sclk_isp_uart_cam1",
+ "sclk_isp_spi1_cam1",
+ "sclk_isp_spi0_cam1",
+ "aclk_cam1_333",
+ "aclk_cam1_400",
+ "aclk_cam1_552";
+ clocks = <&xxti>,
+ <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+ <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+ <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+ <&cmu_top CLK_ACLK_CAM1_333>,
+ <&cmu_top CLK_ACLK_CAM1_400>,
+ <&cmu_top CLK_ACLK_CAM1_552>;
+ power-domains = <&pd_cam1>;
+ };
+
+ cmu_imem: clock-controller@11060000 {
+ compatible = "samsung,exynos5433-cmu-imem";
+ reg = <0x11060000 0x1000>;
+ #clock-cells = <1>;
+
+ clock-names = "oscclk",
+ "aclk_imem_sssx_266",
+ "aclk_imem_266",
+ "aclk_imem_200";
+ clocks = <&xxti>,
+ <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
+ <&cmu_top CLK_DIV_ACLK_IMEM_266>,
+ <&cmu_top CLK_DIV_ACLK_IMEM_200>;
+ };
+
+Example 3: UART controller node that consumes the clock generated by the clock
+ controller.
+
+ serial_0: serial@14c10000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14C10000 0x100>;
+ interrupts = <0 421 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART0>,
+ <&cmu_peric CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
new file mode 100644
index 000000000..6bf1e7493
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -0,0 +1,108 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+ compatible strings to indicate the clock controller
+ functionality.
+
+ - "samsung,exynos7-clock-topc"
+ - "samsung,exynos7-clock-top0"
+ - "samsung,exynos7-clock-top1"
+ - "samsung,exynos7-clock-ccore"
+ - "samsung,exynos7-clock-peric0"
+ - "samsung,exynos7-clock-peric1"
+ - "samsung,exynos7-clock-peris"
+ - "samsung,exynos7-clock-fsys0"
+ - "samsung,exynos7-clock-fsys1"
+ - "samsung,exynos7-clock-mscl"
+ - "samsung,exynos7-clock-aud"
+
+ - reg: physical base address of the controller and the length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+ the given clock controller. Please refer the next section to
+ find the input clocks for a given controller.
+
+- clock-names: list of names of clocks which are fed as the input
+ to the given clock controller.
+
+Input clocks for top0 clock controller:
+ - fin_pll
+ - dout_sclk_bus0_pll
+ - dout_sclk_bus1_pll
+ - dout_sclk_cc_pll
+ - dout_sclk_mfc_pll
+ - dout_sclk_aud_pll
+
+Input clocks for top1 clock controller:
+ - fin_pll
+ - dout_sclk_bus0_pll
+ - dout_sclk_bus1_pll
+ - dout_sclk_cc_pll
+ - dout_sclk_mfc_pll
+
+Input clocks for ccore clock controller:
+ - fin_pll
+ - dout_aclk_ccore_133
+
+Input clocks for peric0 clock controller:
+ - fin_pll
+ - dout_aclk_peric0_66
+ - sclk_uart0
+
+Input clocks for peric1 clock controller:
+ - fin_pll
+ - dout_aclk_peric1_66
+ - sclk_uart1
+ - sclk_uart2
+ - sclk_uart3
+ - sclk_spi0
+ - sclk_spi1
+ - sclk_spi2
+ - sclk_spi3
+ - sclk_spi4
+ - sclk_i2s1
+ - sclk_pcm1
+ - sclk_spdif
+
+Input clocks for peris clock controller:
+ - fin_pll
+ - dout_aclk_peris_66
+
+Input clocks for fsys0 clock controller:
+ - fin_pll
+ - dout_aclk_fsys0_200
+ - dout_sclk_mmc2
+
+Input clocks for fsys1 clock controller:
+ - fin_pll
+ - dout_aclk_fsys1_200
+ - dout_sclk_mmc0
+ - dout_sclk_mmc1
+
+Input clocks for aud clock controller:
+ - fin_pll
+ - fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
new file mode 100644
index 000000000..b657ecd0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for simple fixed-rate clock sources
+
+maintainers:
+ - Michael Turquette <mturquette@baylibre.com>
+ - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+ compatible:
+ const: fixed-clock
+
+ "#clock-cells":
+ const: 0
+
+ clock-frequency: true
+
+ clock-accuracy:
+ description: accuracy of clock in ppb (parts per billion).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clock-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ clock-accuracy = <100>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
new file mode 100644
index 000000000..f415845b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for simple fixed factor rate clock sources
+
+maintainers:
+ - Michael Turquette <mturquette@baylibre.com>
+ - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pll3-2x-clk
+ - fixed-factor-clock
+
+ "#clock-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-div:
+ description: Fixed divider
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+
+ clock-mult:
+ description: Fixed multiplier
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - "#clock-cells"
+ - clock-div
+ - clock-mult
+
+additionalProperties: false
+
+examples:
+ - |
+ clock {
+ compatible = "fixed-factor-clock";
+ clocks = <&parentclk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
new file mode 100644
index 000000000..c359367fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
@@ -0,0 +1,24 @@
+Binding for simple memory mapped io fixed-rate clock sources.
+The driver reads a clock frequency value from a single 32-bit memory mapped
+I/O register and registers it as a fixed rate clock.
+
+It was designed for test systems, like FPGA, not for complete, finished SoCs.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-mmio-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- reg : Address and length of the clock value register set.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+sysclock: sysclock@fd020004 {
+ #clock-cells = <0>;
+ compatible = "fixed-mmio-clock";
+ reg = <0xfd020004 0x4>;
+};
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
new file mode 100644
index 000000000..9ac716dfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding
+
+maintainers:
+ - Wen He <wen.he_1@nxp.com>
+
+description: |
+ NXP LS1028A has a clock domain PXLCLK0 used for the Display output
+ interface in the display core, as implemented in TSMC CLN28HPM PLL.
+ which generate and offers pixel clocks to Display.
+
+properties:
+ compatible:
+ const: fsl,ls1028a-plldig
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 0
+
+ fsl,vco-hz:
+ description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+ of this PLL cannot be changed during runtime only at startup. Therefore,
+ the output frequencies are very limited and might not even closely match
+ the requested frequency. To work around this restriction the user may specify
+ its own desired VCO frequency for the PLL.
+ minimum: 650000000
+ maximum: 1300000000
+ default: 1188000000
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Display PIXEL Clock node:
+ - |
+ dpclk: clock-display@f1f0000 {
+ compatible = "fsl,ls1028a-plldig";
+ reg = <0xf1f0000 0xffff>;
+ #clock-cells = <0>;
+ clocks = <&osc_27m>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
new file mode 100644
index 000000000..fc3bdfdc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAI bitclock-as-a-clock binding
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ It is possible to use the BCLK pin of a SAI module as a generic clock
+ output. Some SoC are very constrained in their pin multiplexer
+ configuration. Eg. pins can only be changed groups. For example, on the
+ LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI,
+ the second pins are wasted. Using this binding it is possible to use the
+ clock of the second SAI as a MCLK clock for an audio codec, for example.
+
+ This is a composite of a gated clock and a divider clock.
+
+properties:
+ compatible:
+ const: fsl,vf610-sai-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mclk: clock-mclk@f130080 {
+ compatible = "fsl,vf610-sai-clock";
+ reg = <0x0 0xf130080 0x0 0x80>;
+ #clock-cells = <0>;
+ clocks = <&parentclk>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
new file mode 100644
index 000000000..332396265
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
@@ -0,0 +1,26 @@
+Fujitsu CRG11 clock driver bindings
+-----------------------------------
+
+Required properties :
+- compatible : Shall contain "fujitsu,mb86s70-crg11"
+- #clock-cells : Shall be 3 {cntrlr domain port}
+
+The consumer specifies the desired clock pointing to its phandle.
+
+Example:
+
+ clock: crg11 {
+ compatible = "fujitsu,mb86s70-crg11";
+ #clock-cells = <3>;
+ };
+
+ mhu: mhu0@2b1f0000 {
+ #mbox-cells = <1>;
+ compatible = "arm,mhu";
+ reg = <0 0x2B1F0000 0x1000>;
+ interrupts = <0 36 4>, /* LP Non-Sec */
+ <0 35 4>, /* HP Non-Sec */
+ <0 37 4>; /* Secure */
+ clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */
+ clock-names = "clk";
+ };
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
new file mode 100644
index 000000000..d3379ff9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
@@ -0,0 +1,21 @@
+Binding for simple gpio gated clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-gate-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- enable-gpios : GPIO reference for enabling and disabling the clock.
+
+Optional properties:
+- clocks: Maximum of one parent clock is supported.
+
+Example:
+ clock {
+ compatible = "gpio-gate-clock";
+ clocks = <&parentclk>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
new file mode 100644
index 000000000..2be1e038c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
@@ -0,0 +1,19 @@
+Binding for simple gpio clock multiplexer.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-mux-clock".
+- clocks: list of two references to parent clocks.
+- #clock-cells : from common clock binding; shall be set to 0.
+- select-gpios : GPIO reference for selecting the parent clock.
+
+Example:
+ clock {
+ compatible = "gpio-mux-clock";
+ clocks = <&parentclk1>, <&parentclk2>;
+ #clock-cells = <0>;
+ select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
new file mode 100644
index 000000000..dad6269f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
@@ -0,0 +1,20 @@
+* Hisilicon Hi3620 Clock Controller
+
+The Hi3620 clock controller generates and supplies clock to various
+controllers within the Hi3620 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
+ - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt
new file mode 100644
index 000000000..946da7cee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt
@@ -0,0 +1,47 @@
+* Hisilicon Hi3660 Clock Controller
+
+The Hi3660 clock controller generates and supplies clock to various
+controllers within the Hi3660 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+ indicate the clock controller functionality.
+
+ - "hisilicon,hi3660-crgctrl"
+ - "hisilicon,hi3660-pctrl"
+ - "hisilicon,hi3660-pmuctrl"
+ - "hisilicon,hi3660-sctrl"
+ - "hisilicon,hi3660-iomcu"
+ - "hisilicon,hi3660-stub-clk"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Optional Properties:
+
+- mboxes: Phandle to the mailbox for sending message to MCU.
+ (See: ../mailbox/hisilicon,hi3660-mailbox.txt for more info)
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>.
+
+Examples:
+ crg_ctrl: clock-controller@fff35000 {
+ compatible = "hisilicon,hi3660-crgctrl", "syscon";
+ reg = <0x0 0xfff35000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@fdf02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
diff --git a/Documentation/devicetree/bindings/clock/hi3670-clock.txt b/Documentation/devicetree/bindings/clock/hi3670-clock.txt
new file mode 100644
index 000000000..66f3697ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3670-clock.txt
@@ -0,0 +1,43 @@
+* Hisilicon Hi3670 Clock Controller
+
+The Hi3670 clock controller generates and supplies clock to various
+controllers within the Hi3670 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+ indicate the clock controller functionality.
+
+ - "hisilicon,hi3670-crgctrl"
+ - "hisilicon,hi3670-pctrl"
+ - "hisilicon,hi3670-pmuctrl"
+ - "hisilicon,hi3670-sctrl"
+ - "hisilicon,hi3670-iomcu"
+ - "hisilicon,hi3670-media1-crg"
+ - "hisilicon,hi3670-media2-crg"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3670-clock.h>.
+
+Examples:
+ crg_ctrl: clock-controller@fff35000 {
+ compatible = "hisilicon,hi3670-crgctrl", "syscon";
+ reg = <0x0 0xfff35000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@fdf02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+ <&crg_ctrl HI3670_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
new file mode 100644
index 000000000..17ac4a3dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -0,0 +1,52 @@
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+ indicate the clock controller functionality.
+
+ - "hisilicon,hi6220-acpu-sctrl"
+ - "hisilicon,hi6220-aoctrl"
+ - "hisilicon,hi6220-sysctrl"
+ - "hisilicon,hi6220-mediactrl"
+ - "hisilicon,hi6220-pmctrl"
+ - "hisilicon,hi6220-stub-clk"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+ the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+ second parameter is the channel number.
+
+Example 1:
+ sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+Example 2:
+ stub_clock: stub_clock {
+ compatible = "hisilicon,hi6220-stub-clk";
+ hisilicon,hi6220-clk-sram = <&sram>;
+ #clock-cells = <1>;
+ mboxes = <&mailbox 1>;
+ };
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.
diff --git a/Documentation/devicetree/bindings/clock/hisi-crg.txt b/Documentation/devicetree/bindings/clock/hisi-crg.txt
new file mode 100644
index 000000000..cc60b3d42
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisi-crg.txt
@@ -0,0 +1,50 @@
+* HiSilicon Clock and Reset Generator(CRG)
+
+The CRG module provides clock and reset signals to various
+modules within the SoC.
+
+This binding uses the following bindings:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ Documentation/devicetree/bindings/reset/reset.txt
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "hisilicon,hi3516cv300-crg"
+ - "hisilicon,hi3516cv300-sysctrl"
+ - "hisilicon,hi3519-crg"
+ - "hisilicon,hi3798cv200-crg"
+ - "hisilicon,hi3798cv200-sysctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
+
+- #reset-cells: should be 2.
+
+A reset signal can be controlled by writing a bit register in the CRG module.
+The reset specifier consists of two cells. The first cell represents the
+register offset relative to the base address. The second cell represents the
+bit index in the register.
+
+Example: CRG nodes
+CRG: clock-reset-controller@12010000 {
+ compatible = "hisilicon,hi3519-crg";
+ reg = <0x12010000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+};
+
+Example: consumer nodes
+i2c0: i2c@12110000 {
+ compatible = "hisilicon,hi3519-i2c";
+ reg = <0x12110000 0x1000>;
+ clocks = <&CRG HI3519_I2C0_RST>;
+ resets = <&CRG 0xe4 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
new file mode 100644
index 000000000..4733e58e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
@@ -0,0 +1,30 @@
+* Hisilicon Hix5hd2 Clock Controller
+
+The hix5hd2 clock controller generates and supplies clock to various
+controllers within the hix5hd2 SoC.
+
+Required Properties:
+
+- compatible: should be "hisilicon,hix5hd2-clock"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>.
+
+Examples:
+ clock: clock@f8a22000 {
+ compatible = "hisilicon,hix5hd2-clock";
+ reg = <0xf8a22000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: uart@f8b00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8b00000 0x1000>;
+ interrupts = <0 49 4>;
+ clocks = <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "apb_pclk";
+ };
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
new file mode 100644
index 000000000..2ac1131fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators
+
+description: |
+ The IDT VersaClock 5 and VersaClock 6 are programmable I2C
+ clock generators providing from 3 to 12 output clocks.
+
+ When referencing the provided clock in the DT using phandle and clock
+ specifier, the following mapping applies:
+
+ - 5P49V5923:
+ 0 -- OUT0_SEL_I2CB
+ 1 -- OUT1
+ 2 -- OUT2
+
+ - 5P49V5933:
+ 0 -- OUT0_SEL_I2CB
+ 1 -- OUT1
+ 2 -- OUT4
+
+ - other parts:
+ 0 -- OUT0_SEL_I2CB
+ 1 -- OUT1
+ 2 -- OUT2
+ 3 -- OUT3
+ 4 -- OUT4
+
+maintainers:
+ - Luca Ceresoli <luca@lucaceresoli.net>
+
+properties:
+ compatible:
+ enum:
+ - idt,5p49v5923
+ - idt,5p49v5925
+ - idt,5p49v5933
+ - idt,5p49v5935
+ - idt,5p49v6901
+ - idt,5p49v6965
+
+ reg:
+ description: I2C device address
+ enum: [ 0x68, 0x6a ]
+
+ '#clock-cells':
+ const: 1
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ xin, clkin ]
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+patternProperties:
+ "^OUT[1-4]$":
+ type: object
+ description:
+ Description of one of the outputs (OUT1..OUT4). See "Clock1 Output
+ Configuration" in the Versaclock 5/6/6E Family Register Description
+ and Programming Guide.
+ properties:
+ idt,mode:
+ description:
+ The output drive mode. Values defined in dt-bindings/clk/versaclock.h
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 6
+ idt,voltage-microvolt:
+ description: The output drive voltage.
+ enum: [ 1800000, 2500000, 3300000 ]
+ idt,slew-percent:
+ description: The Slew rate control for CMOS single-ended.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 80, 85, 90, 100 ]
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - idt,5p49v5933
+ - idt,5p49v5935
+ then:
+ # Devices with builtin crystal + optional external input
+ properties:
+ clock-names:
+ const: clkin
+ clocks:
+ maxItems: 1
+ else:
+ # Devices without builtin crystal
+ required:
+ - clock-names
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clk/versaclock.h>
+
+ /* 25MHz reference crystal */
+ ref25: ref25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* IDT 5P49V5923 I2C clock generator */
+ vc5: clock-generator@6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+
+ /* Connect XIN input to 25MHz reference */
+ clocks = <&ref25m>;
+ clock-names = "xin";
+
+ OUT1 {
+ idt,drive-mode = <VC5_CMOSD>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <80>;
+ };
+
+ OUT4 {
+ idt,drive-mode = <VC5_LVDS>;
+ };
+ };
+ };
+
+ /* Consumer referencing the 5P49V5923 pin OUT1 */
+ consumer {
+ /* ... */
+ clocks = <&vc5 1>;
+ /* ... */
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
new file mode 100644
index 000000000..7bc5e9ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -0,0 +1,31 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The device node must be a child node of the syscon node corresponding to the
+Boston system's platform registers.
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+ Values available for clock consumers can be found in the header file:
+ <dt-bindings/clock/boston-clock.h>
+
+Example:
+
+ system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ };
+ };
+
+ uart0: uart@17ffe000 {
+ /* ... */
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
new file mode 100644
index 000000000..f4833a29b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX1 CPUs
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+ for the full list of i.MX1 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx1-ccm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx1-clock.h>
+
+ clock-controller@21b000 {
+ #clock-cells = <1>;
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ };
+
+ pwm@208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
new file mode 100644
index 000000000..518ad9a47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX21
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+ for the full list of i.MX21 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx21-ccm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx21-clock.h>
+
+ clock-controller@10027000 {
+ compatible = "fsl,imx21-ccm";
+ reg = <0x10027000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ serial@1000a000 {
+ compatible = "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+ <&clks IMX21_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
new file mode 100644
index 000000000..5e296a00e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX23
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX23
+ clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll 1
+ ref_cpu 2
+ ref_emi 3
+ ref_pix 4
+ ref_io 5
+ saif_sel 6
+ lcdif_sel 7
+ gpmi_sel 8
+ ssp_sel 9
+ emi_sel 10
+ cpu 11
+ etm_sel 12
+ cpu_pll 13
+ cpu_xtal 14
+ hbus 15
+ xbus 16
+ lcdif_div 17
+ ssp_div 18
+ gpmi_div 19
+ emi_pll 20
+ emi_xtal 21
+ etm_div 22
+ saif_div 23
+ clk32k_div 24
+ rtc 25
+ adc 26
+ spdif_div 27
+ clk32k 28
+ dri 29
+ pwm 30
+ filt 31
+ uart 32
+ ssp 33
+ gpmi 34
+ spdif 35
+ emi 36
+ saif 37
+ lcdif 38
+ etm 39
+ usb 40
+ usb_phy 41
+
+properties:
+ compatible:
+ const: fsl,imx23-clkctrl
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@80040000 {
+ compatible = "fsl,imx23-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ serial@8006c000 {
+ compatible = "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <24>;
+ clocks = <&clks 32>;
+ dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
new file mode 100644
index 000000000..2a2b10778
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX25
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX25
+ clocks and IDs.
+
+ Clock ID
+ --------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+ cko_div 127
+ cko_sel 128
+ cko 129
+
+properties:
+ compatible:
+ const: fsl,imx25-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
new file mode 100644
index 000000000..a75365453
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX27
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@nxp.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+ for the full list of i.MX27 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx27-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx27-clock.h>
+
+ clock-controller@10027000 {
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
new file mode 100644
index 000000000..f831b780f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX28
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX28
+ clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll0 1
+ pll1 2
+ pll2 3
+ ref_cpu 4
+ ref_emi 5
+ ref_io0 6
+ ref_io1 7
+ ref_pix 8
+ ref_hsadc 9
+ ref_gpmi 10
+ saif0_sel 11
+ saif1_sel 12
+ gpmi_sel 13
+ ssp0_sel 14
+ ssp1_sel 15
+ ssp2_sel 16
+ ssp3_sel 17
+ emi_sel 18
+ etm_sel 19
+ lcdif_sel 20
+ cpu 21
+ ptp_sel 22
+ cpu_pll 23
+ cpu_xtal 24
+ hbus 25
+ xbus 26
+ ssp0_div 27
+ ssp1_div 28
+ ssp2_div 29
+ ssp3_div 30
+ gpmi_div 31
+ emi_pll 32
+ emi_xtal 33
+ lcdif_div 34
+ etm_div 35
+ ptp 36
+ saif0_div 37
+ saif1_div 38
+ clk32k_div 39
+ rtc 40
+ lradc 41
+ spdif_div 42
+ clk32k 43
+ pwm 44
+ uart 45
+ ssp0 46
+ ssp1 47
+ ssp2 48
+ ssp3 49
+ gpmi 50
+ spdif 51
+ emi 52
+ saif0 53
+ saif1 54
+ lcdif 55
+ etm 56
+ fec 57
+ can0 58
+ can1 59
+ usb0 60
+ usb1 61
+ usb0_phy 62
+ usb1_phy 63
+ enet_out 64
+
+properties:
+ compatible:
+ const: fsl,imx28-clkctrl
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@80040000 {
+ compatible = "fsl,imx28-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ serial@8006a000 {
+ compatible = "fsl,imx28-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 000000000..a25a374b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@nxp.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX31
+ clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ upll 5
+ mcu_main 6
+ hsp 7
+ ahb 8
+ nfc 9
+ ipg 10
+ per_div 11
+ per 12
+ csi_sel 13
+ fir_sel 14
+ csi_div 15
+ usb_div_pre 16
+ usb_div_post 17
+ fir_div_pre 18
+ fir_div_post 19
+ sdhc1_gate 20
+ sdhc2_gate 21
+ gpt_gate 22
+ epit1_gate 23
+ epit2_gate 24
+ iim_gate 25
+ ata_gate 26
+ sdma_gate 27
+ cspi3_gate 28
+ rng_gate 29
+ uart1_gate 30
+ uart2_gate 31
+ ssi1_gate 32
+ i2c1_gate 33
+ i2c2_gate 34
+ i2c3_gate 35
+ hantro_gate 36
+ mstick1_gate 37
+ mstick2_gate 38
+ csi_gate 39
+ rtc_gate 40
+ wdog_gate 41
+ pwm_gate 42
+ sim_gate 43
+ ect_gate 44
+ usb_gate 45
+ kpp_gate 46
+ ipu_gate 47
+ uart3_gate 48
+ uart4_gate 49
+ uart5_gate 50
+ owire_gate 51
+ ssi2_gate 52
+ cspi1_gate 53
+ cspi2_gate 54
+ gacc_gate 55
+ emi_gate 56
+ rtic_gate 57
+ firi_gate 58
+
+properties:
+ compatible:
+ const: fsl,imx31-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for DVFS when a frequency change is requested, request 2 is
+ to generate interrupt for DPTC when a voltage change is requested.
+ items:
+ - description: CCM DVFS interrupt request 1
+ - description: CCM DPTC interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>, <53>;
+ #clock-cells = <1>;
+ };
+
+ serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
new file mode 100644
index 000000000..3e20ccaf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX35
+
+maintainers:
+ - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX35
+ clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ ckih 0
+ mpll 1
+ ppll 2
+ mpll_075 3
+ arm 4
+ hsp 5
+ hsp_div 6
+ hsp_sel 7
+ ahb 8
+ ipg 9
+ arm_per_div 10
+ ahb_per_div 11
+ ipg_per 12
+ uart_sel 13
+ uart_div 14
+ esdhc_sel 15
+ esdhc1_div 16
+ esdhc2_div 17
+ esdhc3_div 18
+ spdif_sel 19
+ spdif_div_pre 20
+ spdif_div_post 21
+ ssi_sel 22
+ ssi1_div_pre 23
+ ssi1_div_post 24
+ ssi2_div_pre 25
+ ssi2_div_post 26
+ usb_sel 27
+ usb_div 28
+ nfc_div 29
+ asrc_gate 30
+ pata_gate 31
+ audmux_gate 32
+ can1_gate 33
+ can2_gate 34
+ cspi1_gate 35
+ cspi2_gate 36
+ ect_gate 37
+ edio_gate 38
+ emi_gate 39
+ epit1_gate 40
+ epit2_gate 41
+ esai_gate 42
+ esdhc1_gate 43
+ esdhc2_gate 44
+ esdhc3_gate 45
+ fec_gate 46
+ gpio1_gate 47
+ gpio2_gate 48
+ gpio3_gate 49
+ gpt_gate 50
+ i2c1_gate 51
+ i2c2_gate 52
+ i2c3_gate 53
+ iomuxc_gate 54
+ ipu_gate 55
+ kpp_gate 56
+ mlb_gate 57
+ mshc_gate 58
+ owire_gate 59
+ pwm_gate 60
+ rngc_gate 61
+ rtc_gate 62
+ rtic_gate 63
+ scc_gate 64
+ sdma_gate 65
+ spba_gate 66
+ spdif_gate 67
+ ssi1_gate 68
+ ssi2_gate 69
+ uart1_gate 70
+ uart2_gate 71
+ uart3_gate 72
+ usbotg_gate 73
+ wdog_gate 74
+ max_gate 75
+ admux_gate 76
+ csi_gate 77
+ csi_div 78
+ csi_sel 79
+ iim_gate 80
+ gpu2d_gate 81
+ ckli_gate 82
+
+properties:
+ compatible:
+ const: fsl,imx35-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ mmc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 000000000..90775c266
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@nxp.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+ for the full list of i.MX5 clock IDs.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx53-ccm
+ - fsl,imx51-ccm
+ - fsl,imx50-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
+
+ can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
new file mode 100644
index 000000000..4f4637edd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 Quad
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6q-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 24m osc
+ - description: 32k osc
+ - description: ckih1 clock input
+ - description: anaclk1 clock input
+ - description: anaclk2 clock input
+
+ clock-names:
+ items:
+ - const: osc
+ - const: ckil
+ - const: ckih1
+ - const: anaclk1
+ - const: anaclk2
+
+ fsl,pmic-stby-poweroff:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
new file mode 100644
index 000000000..b83c8f43d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloLite
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6sl-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6sl-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
new file mode 100644
index 000000000..484894a4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SLL
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6sll-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6sll-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
new file mode 100644
index 000000000..e6c795657
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloX
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6sx-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+ - description: anaclk1 clock input
+ - description: anaclk2 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+ - const: anaclk1
+ - const: anaclk2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6sx-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
new file mode 100644
index 000000000..6a51a3f51
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 UltraLite
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6ul-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@20c4000 {
+ compatible = "fsl,imx6ul-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
new file mode 100644
index 000000000..cefb61db0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7 Dual
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+ for the full list of i.MX7 Dual clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx7d-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@30380000 {
+ compatible = "fsl,imx7d-ccm";
+ reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>;
+ clock-names = "ckil", "osc";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
new file mode 100644
index 000000000..7caf5cee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules
+
+maintainers:
+ - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+ i.MX7ULP Clock functions are under joint control of the System
+ Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+ modules, and Core Mode Controller (CMC)1 blocks
+
+ The clocking scheme provides clear separation between M4 domain
+ and A7 domain. Except for a few clock sources shared between two
+ domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+ and and the Fast IRC clock (FIRCLK), clock sources and clock
+ management are separated and contained within each domain.
+
+ M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+ A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+ Note: this binding doc is only for A7 clock domain.
+
+ The Peripheral Clock Control (PCC) is responsible for clock selection,
+ optional division and clock gating mode for peripherals in their
+ respected power domain.
+
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell.
+ See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+ i.MX7ULP clock IDs of each module.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7ulp-pcc2
+ - fsl,imx7ulp-pcc3
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: nic1 bus clock
+ - description: nic1 clock
+ - description: ddr clock
+ - description: apll pfd2
+ - description: apll pfd1
+ - description: apll pfd0
+ - description: usb pll
+ - description: system osc bus clock
+ - description: fast internal reference clock bus
+ - description: rtc osc
+ - description: system pll bus clock
+
+ clock-names:
+ items:
+ - const: nic1_bus_clk
+ - const: nic1_clk
+ - const: ddr_clk
+ - const: apll_pfd2
+ - const: apll_pfd1
+ - const: apll_pfd0
+ - const: upll
+ - const: sosc_bus_clk
+ - const: firc_bus_clk
+ - const: rosc
+ - const: spll_bus_clk
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@403f0000 {
+ compatible = "fsl,imx7ulp-pcc2";
+ reg = <0x403f0000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+ <&scg1 IMX7ULP_CLK_DDR_DIV>,
+ <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+ <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+ <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+ <&scg1 IMX7ULP_CLK_UPLL>,
+ <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+ <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+ <&scg1 IMX7ULP_CLK_ROSC>,
+ <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+ clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+ "apll_pfd2", "apll_pfd1", "apll_pfd0",
+ "upll", "sosc_bus_clk", "firc_bus_clk",
+ "rosc", "spll_bus_clk";
+ };
+
+ mmc@40380000 {
+ compatible = "fsl,imx7ulp-usdhc";
+ reg = <0x40380000 0x10000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+ <&pcc2 IMX7ULP_CLK_USDHC1>;
+ clock-names ="ipg", "ahb", "per";
+ bus-width = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
new file mode 100644
index 000000000..ee8efb4ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules
+
+maintainers:
+ - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+ i.MX7ULP Clock functions are under joint control of the System
+ Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+ modules, and Core Mode Controller (CMC)1 blocks
+
+ The clocking scheme provides clear separation between M4 domain
+ and A7 domain. Except for a few clock sources shared between two
+ domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+ and and the Fast IRC clock (FIRCLK), clock sources and clock
+ management are separated and contained within each domain.
+
+ M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+ A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+ Note: this binding doc is only for A7 clock domain.
+
+ The System Clock Generation (SCG) is responsible for clock generation
+ and distribution across this device. Functions performed by the SCG
+ include: clock reference selection, generation of clock used to derive
+ processor, system, peripheral bus and external memory interface clocks,
+ source selection for peripheral clocks and control of power saving
+ clock gating mode.
+
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell.
+ See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+ i.MX7ULP clock IDs of each module.
+
+properties:
+ compatible:
+ const: fsl,imx7ulp-scg1
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: rtc osc
+ - description: system osc
+ - description: slow internal reference clock
+ - description: fast internal reference clock
+ - description: usb PLL
+
+ clock-names:
+ items:
+ - const: rosc
+ - const: sosc
+ - const: sirc
+ - const: firc
+ - const: upll
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@403e0000 {
+ compatible = "fsl,imx7ulp-scg1";
+ reg = <0x403e0000 0x10000>;
+ clocks = <&rosc>, <&sosc>, <&sirc>,
+ <&firc>, <&upll>;
+ clock-names = "rosc", "sosc", "sirc",
+ "firc", "upll";
+ #clock-cells = <1>;
+ };
+
+ mmc@40380000 {
+ compatible = "fsl,imx7ulp-usdhc";
+ reg = <0x40380000 0x10000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+ <&pcc2 IMX7ULP_CLK_USDHC1>;
+ clock-names ="ipg", "ahb", "per";
+ bus-width = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
new file mode 100644
index 000000000..625f573a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Clock Control Module Binding
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+ NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
+ controller, which generates and supplies to all modules.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-ccm
+ - fsl,imx8mn-ccm
+ - fsl,imx8mp-ccm
+ - fsl,imx8mq-ccm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 6
+ maxItems: 7
+
+ clock-names:
+ minItems: 6
+ maxItems: 7
+
+ '#clock-cells':
+ const: 1
+ description:
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
+ for the full list of i.MX8M clock IDs.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8mq-ccm
+ then:
+ properties:
+ clocks:
+ minItems: 7
+ maxItems: 7
+ items:
+ - description: 32k osc
+ - description: 25m osc
+ - description: 27m osc
+ - description: ext1 clock input
+ - description: ext2 clock input
+ - description: ext3 clock input
+ - description: ext4 clock input
+ clock-names:
+ minItems: 7
+ maxItems: 7
+ items:
+ - const: ckil
+ - const: osc_25m
+ - const: osc_27m
+ - const: clk_ext1
+ - const: clk_ext2
+ - const: clk_ext3
+ - const: clk_ext4
+ else:
+ properties:
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ext1 clock input
+ - description: ext2 clock input
+ - description: ext3 clock input
+ - description: ext4 clock input
+
+ clock-names:
+ items:
+ - const: osc_32k
+ - const: osc_24m
+ - const: clk_ext1
+ - const: clk_ext2
+ - const: clk_ext3
+ - const: clk_ext4
+
+additionalProperties: false
+
+examples:
+ # Clock Control Module node:
+ - |
+ clock-controller@30380000 {
+ compatible = "fsl,imx8mm-ccm";
+ reg = <0x30380000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+ <&clk_ext3>, <&clk_ext4>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+ "clk_ext3", "clk_ext4";
+ };
+
+ - |
+ clock-controller@30390000 {
+ compatible = "fsl,imx8mq-ccm";
+ reg = <0x30380000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>,
+ <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+ clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1",
+ "clk_ext2", "clk_ext3", "clk_ext4";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
new file mode 100644
index 000000000..33f3010f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+maintainers:
+ - Aisheng Dong <aisheng.dong@nxp.com>
+
+description: |
+ The Low-Power Clock Gate (LPCG) modules contain a local programming
+ model to control the clock gates for the peripherals. An LPCG module
+ is used to locally gate the clocks for the associated peripheral.
+
+ This level of clock gating is provided after the clocks are generated
+ by the SCU resources and clock controls. Thus even if the clock is
+ enabled by these control bits, it might still not be running based
+ on the base resource.
+
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See the full list of clock IDs from:
+ include/dt-bindings/clock/imx8-clock.h
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-lpcg-adma
+ - fsl,imx8qxp-lpcg-conn
+ - fsl,imx8qxp-lpcg-dc
+ - fsl,imx8qxp-lpcg-dsp
+ - fsl,imx8qxp-lpcg-gpu
+ - fsl,imx8qxp-lpcg-hsio
+ - fsl,imx8qxp-lpcg-img
+ - fsl,imx8qxp-lpcg-lsio
+ - fsl,imx8qxp-lpcg-vpu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@5b200000 {
+ compatible = "fsl,imx8qxp-lpcg-conn";
+ reg = <0x5b200000 0xb0000>;
+ #clock-cells = <1>;
+ };
+
+ mmc@5b010000 {
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b010000 0x10000>;
+ clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ power-domains = <&pd IMX_SC_R_SDHC_0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
new file mode 100644
index 000000000..5dd7ea8a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs CGU devicetree bindings
+
+description: |
+ The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+ typically includes a variety of PLLs, multiplexers, dividers & gates in order
+ to provide many different clock signals derived from only 2 external source
+ clocks.
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ingenic,jz4740-cgu
+ - ingenic,jz4725b-cgu
+ - ingenic,jz4770-cgu
+ - ingenic,jz4780-cgu
+ - ingenic,x1000-cgu
+ - ingenic,x1830-cgu
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^clock-controller@[0-9a-f]+$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#clock-cells":
+ const: 1
+
+ ranges: true
+
+ compatible:
+ items:
+ - enum:
+ - ingenic,jz4740-cgu
+ - ingenic,jz4725b-cgu
+ - ingenic,jz4770-cgu
+ - ingenic,jz4780-cgu
+ - ingenic,x1000-cgu
+ - ingenic,x1830-cgu
+ - const: simple-mfd
+ minItems: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: External oscillator clock
+ - description: Internal 32 kHz RTC clock
+
+ clock-names:
+ items:
+ - const: ext
+ - enum:
+ - rtc
+ - osc32k # Different name, same clock
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 64
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 64
+
+ assigned-clock-rates:
+ minItems: 1
+ maxItems: 64
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+patternProperties:
+ "^usb-phy@[a-f0-9]+$":
+ allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4770-cgu.h>
+ cgu: clock-controller@10000000 {
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ vcc-supply = <&ldo5>;
+
+ #phy-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
new file mode 100644
index 000000000..9f4ec5cb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
@@ -0,0 +1,20 @@
+Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be
+ "intel,stratix10-clkmgr"
+
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+
+- #clock-cells : from common clock binding, shall be set to 1.
+
+Example:
+ clkmgr: clock-controller@ffd10000 {
+ compatible = "intel,stratix10-clkmgr";
+ reg = <0xffd10000 0x1000>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex.yaml b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
new file mode 100644
index 000000000..cf5a9eb80
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex platform clock controller binding
+
+maintainers:
+ - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+ The Intel Agilex Clock controller is an integrated clock controller, which
+ generates and supplies to all modules.
+
+properties:
+ compatible:
+ const: intel,agilex-clkmgr
+
+ '#clock-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock controller node:
+ - |
+ clkmgr: clock-controller@ffd10000 {
+ compatible = "intel,agilex-clkmgr";
+ reg = <0xffd10000 0x1000>;
+ clocks = <&osc1>;
+ #clock-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
new file mode 100644
index 000000000..f3e1a700a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding
+
+maintainers:
+ - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+ Lightning Mountain(LGM) SoC's Clock Generation Unit(CGU) driver provides
+ all means to access the CGU hardware module in order to generate a series
+ of clocks for the whole system and individual peripherals.
+
+ Please refer to include/dt-bindings/clock/intel,lgm-clk.h header file, it
+ defines all available clocks as macros. These macros can be used in device
+ tree sources.
+
+properties:
+ compatible:
+ const: intel,cgu-lgm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ cgu: clock-controller@e0200000 {
+ compatible = "intel,cgu-lgm";
+ reg = <0xe0200000 0x33c>;
+ #clock-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt
new file mode 100644
index 000000000..c5aa18702
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt
@@ -0,0 +1,29 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for Keystone gate control driver which uses PSC controller IP.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,keystone,psc-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : parent clock phandle
+- reg : psc control and domain address address space
+- reg-names : psc control and domain registers
+- domain-id : psc domain id needed to check the transition state register
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+ default output clock name
+Example:
+ clkusb: clkusb {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "usb";
+ reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
new file mode 100644
index 000000000..47570d207
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multipler registers
+- reg-names : control, multiplier and post-divider. The multiplier and
+ post-divider registers are applicable only for main pll clock
+- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
+ for postdiv
+
+Example:
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+ reg-names = "control", "multiplier", "post-divider";
+ fixed-postdiv = <2>;
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkpass>;
+ clock-output-names = "pa-pll-clk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ mainmuxclk: mainmuxclk@2310108 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-mux-clock";
+ clocks = <&mainpllclk>, <&refclkmain>;
+ reg = <0x02310108 4>;
+ bit-shift = <23>;
+ bit-mask = <1>;
+ clock-output-names = "mainmuxclk";
+ };
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ gemtraceclk: gemtraceclk@2310120 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-divider-clock";
+ clocks = <&mainmuxclk>;
+ reg = <0x02310120 4>;
+ bit-shift = <0>;
+ bit-mask = <8>;
+ clock-output-names = "gemtraceclk";
+ };
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
new file mode 100644
index 000000000..fa97c1201
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
@@ -0,0 +1,77 @@
+* NXP LPC1850 Clock Control Unit (CCU)
+
+Each CGU base clock has several clock branches which can be turned on
+or off independently by the Clock Control Units CCU1 or CCU2. The
+branch clocks are distributed between CCU1 and CCU2.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+ Should be "nxp,lpc1850-ccu"
+- reg:
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells:
+ Shall have value <1>. The permitted clock-specifier values
+ are the branch clock names defined in table below.
+- clocks:
+ Shall contain a list of phandles for the base clocks routed
+ from the CGU to the specific CCU. See mapping of base clocks
+ and CCU in table below.
+- clock-names:
+ Shall contain a list of names for the base clock routed
+ from the CGU to the specific CCU. Valid CCU clock names:
+ "base_usb0_clk", "base_periph_clk", "base_usb1_clk",
+ "base_cpu_clk", "base_spifi_clk", "base_spi_clk",
+ "base_apb1_clk", "base_apb3_clk", "base_adchs_clk",
+ "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk",
+ "base_uart0_clk", "base_uart1_clk", "base_uart2_clk",
+ "base_uart3_clk", "base_audio_clk"
+
+Which branch clocks that are available on the CCU depends on the
+specific LPC part. Check the user manual for your specific part.
+
+A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
+
+Example board file:
+
+soc {
+ ccu1: clock-controller@40051000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40051000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+ <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+ <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+ <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+ clock-names = "base_apb3_clk", "base_apb1_clk",
+ "base_spifi_clk", "base_cpu_clk",
+ "base_periph_clk", "base_usb0_clk",
+ "base_usb1_clk", "base_spi_clk";
+ };
+
+ ccu2: clock-controller@40052000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40052000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+ <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+ <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+ <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
+ clock-names = "base_audio_clk", "base_uart3_clk",
+ "base_uart2_clk", "base_uart1_clk",
+ "base_uart0_clk", "base_ssp1_clk",
+ "base_ssp0_clk", "base_sdio_clk";
+ };
+
+ /* A user of CCU brach clocks */
+ uart1: serial@40082000 {
+ ...
+ clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
new file mode 100644
index 000000000..2cc32a9a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
@@ -0,0 +1,131 @@
+* NXP LPC1850 Clock Generation Unit (CGU)
+
+The CGU generates multiple independent clocks for the core and the
+peripheral blocks of the LPC18xx. Each independent clock is called
+a base clock and itself is one of the inputs to the two Clock
+Control Units (CCUs) which control the branch clocks to the
+individual peripherals.
+
+The CGU selects the inputs to the clock generators from multiple
+clock sources, controls the clock generation, and routes the outputs
+of the clock generators through the clock source bus to the output
+stages. Each output stage provides an independent clock source and
+corresponds to one of the base clocks for the LPC18xx.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+ Should be "nxp,lpc1850-cgu"
+- reg:
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells:
+ Shall have value <1>. The permitted clock-specifier values
+ are the base clock numbers defined below.
+- clocks:
+ Shall contain a list of phandles for the external input
+ sources to the CGU. The list shall be in the following
+ order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
+- clock-indices:
+ Shall be an ordered list of numbers defining the base clock
+ number provided by the CGU.
+- clock-output-names:
+ Shall be an ordered list of strings defining the names of
+ the clocks provided by the CGU.
+
+Which base clocks that are available on the CGU depends on the
+specific LPC part. Base clocks are numbered from 0 to 27.
+
+Number: Name: Description:
+ 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT
+ 1 BASE_USB0_CLK Base clock for USB0
+ 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem,
+ SPI, and SGPIO
+ 3 BASE_USB1_CLK Base clock for USB1
+ 4 BASE_CPU_CLK System base clock for ARM Cortex-M core
+ and APB peripheral blocks #0 and #2
+ 5 BASE_SPIFI_CLK Base clock for SPIFI
+ 6 BASE_SPI_CLK Base clock for SPI
+ 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock
+ 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock
+ 9 BASE_APB1_CLK Base clock for APB peripheral block # 1
+10 BASE_APB3_CLK Base clock for APB peripheral block # 3
+11 BASE_LCD_CLK Base clock for LCD
+12 BASE_ADCHS_CLK Base clock for ADCHS
+13 BASE_SDIO_CLK Base clock for SD/MMC
+14 BASE_SSP0_CLK Base clock for SSP0
+15 BASE_SSP1_CLK Base clock for SSP1
+16 BASE_UART0_CLK Base clock for UART0
+17 BASE_UART1_CLK Base clock for UART1
+18 BASE_UART2_CLK Base clock for UART2
+19 BASE_UART3_CLK Base clock for UART3
+20 BASE_OUT_CLK Base clock for CLKOUT pin
+24-21 - Reserved
+25 BASE_AUDIO_CLK Base clock for audio system (I2S)
+26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output
+27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output
+
+BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
+BASE_ADCHS_CLK is only available on LPC4370.
+
+
+Example board file:
+
+/ {
+ clocks {
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ xtal32: xtal32 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ enet_rx_clk: enet_rx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_rx_clk";
+ };
+
+ enet_tx_clk: enet_tx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_tx_clk";
+ };
+
+ gp_clkin: gp_clkin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "gp_clkin";
+ };
+ };
+
+ soc {
+ cgu: clock-controller@40050000 {
+ compatible = "nxp,lpc1850-cgu";
+ reg = <0x40050000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+ };
+
+ /* A CGU and CCU clock consumer */
+ lcdc: lcdc@40008000 {
+ ...
+ clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
new file mode 100644
index 000000000..6f1c7b4e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
@@ -0,0 +1,52 @@
+* NXP LPC1850 CREG clocks
+
+The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
+control registers for two low speed clocks. One of the clocks is a
+32 kHz oscillator driver with power up/down and clock gating. Next
+is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
+
+These clocks are used by the RTC and the Event Router peripherials.
+The 32 kHz can also be routed to other peripherials to enable low
+power modes.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+ Should be "nxp,lpc1850-creg-clk"
+- #clock-cells:
+ Shall have value <1>.
+- clocks:
+ Shall contain a phandle to the fixed 32 kHz crystal.
+
+The creg-clk node must be a child of the creg syscon node.
+
+The following clocks are available from the clock node.
+
+Clock ID Name
+ 0 1 kHz clock
+ 1 32 kHz Oscillator
+
+Example:
+soc {
+ creg: syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+
+ creg_clk: clock-controller {
+ compatible = "nxp,lpc1850-creg-clk";
+ clocks = <&xtal32>;
+ #clock-cells = <1>;
+ };
+
+ ...
+ };
+
+ rtc: rtc@40046000 {
+ ...
+ clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "rtc", "reg";
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
new file mode 100644
index 000000000..3ce97cfe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
@@ -0,0 +1,29 @@
+AXM5516 clock driver bindings
+-----------------------------
+
+Required properties :
+- compatible : shall contain "lsi,axm5516-clks"
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+
+The consumer specifies the desired clock by having the clock ID in its "clocks"
+phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
+supported clock IDs.
+
+Example:
+
+ clks: clock-controller@2010020000 {
+ compatible = "lsi,axm5516-clks";
+ #clock-cells = <1>;
+ reg = <0x20 0x10020000 0 0x20000>;
+ };
+
+ serial0: uart@2010080000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10080000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/Documentation/devicetree/bindings/clock/marvell,berlin.txt
new file mode 100644
index 000000000..c611c495f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,berlin.txt
@@ -0,0 +1,31 @@
+Device Tree Clock bindings for Marvell Berlin
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Clock related registers are spread among the chip control registers. Berlin
+clock node should be a sub-node of the chip controller node. Marvell Berlin2
+(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
+minor differences in features and register layout.
+
+Required properties:
+- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
+- #clock-cells: must be 1
+- clocks: must be the input parent clock phandle
+- clock-names: name of the input parent clock
+ Allowed clock-names for the reference clocks are
+ "refclk" for the SoCs oscillator input on all SoCs,
+ and SoC-specific input clocks for
+ BG2/BG2CD: "video_ext0" for the external video clock input
+
+
+Example:
+
+chip_clk: clock {
+ compatible = "marvell,berlin2q-clk";
+
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+};
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml
new file mode 100644
index 000000000..dffa73402
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-audio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 Audio Clock Controller
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+ The audio clock controller generates and supplies the clocks to the audio
+ codec.
+
+ Each clock is assigned an identifier and client nodes use this identifier
+ to specify the clock which they consume.
+
+ All these identifiers could be found in
+ <dt-bindings/clock/marvell,mmp2-audio.h>.
+
+properties:
+ compatible:
+ enum:
+ - marvell,mmp2-audio-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Audio subsystem clock
+ - description: The crystal oscillator clock
+ - description: First I2S clock
+ - description: Second I2S clock
+
+ clock-names:
+ items:
+ - const: audio
+ - const: vctcxo
+ - const: i2s0
+ - const: i2s1
+
+ '#clock-cells':
+ const: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2-audio.h>
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ #include <dt-bindings/power/marvell,mmp2.h>
+
+ clock-controller@d42a0c30 {
+ compatible = "marvell,mmp2-audio-clock";
+ reg = <0xd42a0c30 0x10>;
+ clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+ clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+ <&soc_clocks MMP2_CLK_VCTCXO>,
+ <&soc_clocks MMP2_CLK_I2S0>,
+ <&soc_clocks MMP2_CLK_I2S1>;
+ power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
new file mode 100644
index 000000000..d68f0d196
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 and MMP3 Clock Controller
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+ The clock subsystem on MMP2 or MMP3 generates and supplies clock to various
+ controllers within the SoC.
+
+ Each clock is assigned an identifier and client nodes use this identifier
+ to specify the clock which they consume.
+
+ All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
+
+properties:
+ compatible:
+ enum:
+ - marvell,mmp2-clock # controller compatible with MMP2 SoC
+ - marvell,mmp3-clock # controller compatible with MMP3 SoC
+
+ reg:
+ items:
+ - description: MPMU register region
+ - description: APMU register region
+ - description: APBC register region
+
+ reg-names:
+ items:
+ - const: mpmu
+ - const: apmu
+ - const: apbc
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@d4050000 {
+ compatible = "marvell,mmp2-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa168.txt b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
new file mode 100644
index 000000000..c62eb1d17
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
@@ -0,0 +1,21 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
new file mode 100644
index 000000000..809c5a2d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
@@ -0,0 +1,21 @@
+* Marvell PXA1928 Clock Controllers
+
+The PXA1928 clock subsystem generates and supplies clock to various
+controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller
+blocks called APMU, MPMU, and APBC roughly corresponding to internal buses.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa1928-apmu" - APMU controller compatible
+ - "marvell,pxa1928-mpmu" - MPMU controller compatible
+ - "marvell,pxa1928-apbc" - APBC controller compatible
+- reg: physical base address of the clock controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use the clock controller
+phandle and this identifier to specify the clock which they consume.
+
+All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>.
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
new file mode 100644
index 000000000..d9f41f3c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
@@ -0,0 +1,21 @@
+* Marvell PXA910 Clock Controller
+
+The PXA910 clock subsystem generates and supplies clock to various
+controllers within the PXA910 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 4 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
new file mode 100644
index 000000000..3472b461c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -0,0 +1,114 @@
+Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
+
+This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
+multi-function device. More information can be found in MFD DT binding
+doc as follows:
+ bindings/mfd/max77686.txt for MAX77686 and
+ bindings/mfd/max77802.txt for MAX77802 and
+ bindings/mfd/max77620.txt for MAX77620.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77686.h.
+
+
+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77802.h.
+
+The MAX77686 contains one 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77620.h.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+ - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
+ - 1: 32khz_cp clock (max77686, max77802),
+ - 2: 32khz_pmic clock (max77686).
+
+Clocks are defined as preprocessor macros in above dt-binding header for
+respective chips.
+
+Example:
+
+1. With MAX77686:
+
+#include <dt-bindings/clock/maxim,max77686.h>
+/* ... */
+
+ Node of the MFD chip
+ max77686: max77686@9 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ /* ... */
+ };
+
+ Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
+ };
+
+2. With MAX77802:
+
+#include <dt-bindings/clock/maxim,max77802.h>
+/* ... */
+
+ Node of the MFD chip
+ max77802: max77802@9 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ /* ... */
+ };
+
+ Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77802 MAX77802_CLK_32K_AP>;
+ };
+
+
+3. With MAX77620:
+
+#include <dt-bindings/clock/maxim,max77620.h>
+/* ... */
+
+ Node of the MFD chip
+ max77620: max77620@3c {
+ compatible = "maxim,max77620";
+ reg = <0x3c>;
+ #clock-cells = <1>;
+ /* ... */
+ };
+
+ Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt
new file mode 100644
index 000000000..61bec1100
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max9485.txt
@@ -0,0 +1,59 @@
+Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
+
+This device exposes 4 clocks in total:
+
+- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz
+- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete
+ frequencies
+- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT
+
+MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+requests.
+
+Required properties:
+- compatible: "maxim,max9485"
+- clocks: Input clock, must provice 27.000 MHz
+- clock-names: Must be set to "xclk"
+- #clock-cells: From common clock binding; shall be set to 1
+
+Optional properties:
+- reset-gpios: GPIO descriptor connected to the #RESET input pin
+- vdd-supply: A regulator node for Vdd
+- clock-output-names: Name of output clocks, as defined in common clock
+ bindings
+
+If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
+and "clkout2".
+
+Clocks are defined as preprocessor macros in the dt-binding header.
+
+Example:
+
+ #include <dt-bindings/clock/maxim,max9485.h>
+
+ xo-27mhz: xo-27mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ &i2c0 {
+ max9485: audio-clock@63 {
+ reg = <0x63>;
+ compatible = "maxim,max9485";
+ clock-names = "xclk";
+ clocks = <&xo-27mhz>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&3v3-reg>;
+ #clock-cells = <1>;
+ };
+ };
+
+ // Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "foo-input-clk";
+ clocks = <&max9485 MAX9485_CLKOUT1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
new file mode 100644
index 000000000..c93d88fdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+ secondary oscillator connected.
+
+Example:
+ rootclk: clock-controller@1f801200 {
+ compatible = "microchip,pic32mzda-clk";
+ reg = <0x1f801200 0x200>;
+ #clock-cells = <1>;
+ /* optional */
+ microchip,pic32mzda-sosc;
+ };
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <>;
+ interrupts = <>;
+ clocks = <&rootclk PB2CLK>;
+};
diff --git a/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
new file mode 100644
index 000000000..39559a0a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 DPLL Clock
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+ The Sparx5 DPLL clock controller generates and supplies clock to
+ various peripherals within the SoC.
+
+properties:
+ compatible:
+ const: microchip,sparx5-dpll
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock provider for eMMC:
+ - |
+ lcpll_clk: lcpll-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2500000000>;
+ };
+ clks: clock-controller@61110000c {
+ compatible = "microchip,sparx5-dpll";
+ #clock-cells = <1>;
+ clocks = <&lcpll_clk>;
+ reg = <0x1110000c 0x24>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
new file mode 100644
index 000000000..0e8b07710
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Clock Controller Binding
+
+maintainers:
+ - Taichi Sugaya <sugaya.taichi@socionext.com>
+
+description: |
+ Milbeaut SoCs Clock controller is an integrated clock controller, which
+ generates and supplies to all modules.
+
+ This binding uses common clock bindings
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - socionext,milbeaut-m10v-ccu
+ clocks:
+ maxItems: 1
+ description: external clock
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock controller node:
+ - |
+ m10v-clk-ctrl@1d021000 {
+ compatible = "socionext,milbeaut-m10v-clk-ccu";
+ reg = <0x1d021000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&clki40mhz>;
+ };
+
+ # Required an external clock for Clock controller node:
+ - |
+ clocks {
+ clki40mhz: clki40mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+ /* other clocks */
+ };
+
+ # The clock consumer shall specify the desired clock-output of the clock
+ # controller as below by specifying output-id in its "clk" phandle cell.
+ # 2: uart
+ # 4: 32-bit timer
+ # 7: UHS-I/II
+ - |
+ serial@1e700010 {
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 000000000..fedea8431
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+ clk_pll: clk_pll@98100000 {
+ compatible = "moxa,moxart-pll-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ };
+
+ clk_apb: clk_apb@98100000 {
+ compatible = "moxa,moxart-apb-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ clocks = <&clk_pll>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
new file mode 100644
index 000000000..d8f5c490f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -0,0 +1,87 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = nbclk (L2 Cache clock)
+ 3 = hclk (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 375:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = l2clk (L2 Cache clock)
+ 3 = ddrclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 380/385:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = l2clk (L2 Cache clock)
+ 3 = ddrclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 39x:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = nbclk (Coherent Fabric clock)
+ 3 = hclk (SDRAM Controller Internal Clock)
+ 4 = dclk (SDRAM Interface Clock)
+ 5 = refclk (Reference Clock)
+
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = ddrclk (DDR clock)
+ 3 = mpll (MPLL Clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+The following is a list of provided IDs and clock names on Orion5x:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+ "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
+ "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
+ "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
+ "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+ "marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
+ "marvell,dove-core-clock" - for Dove SoC core clocks
+ "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+ "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+ "marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC
+ "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
+ "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
+ "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
+ "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+ output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+ compatible = "marvell,dove-core-clock";
+ reg = <0xd0214 0x4>;
+ #clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ /* ... */
+ /* get tclk from core clock provider */
+ clocks = <&core_clk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
new file mode 100644
index 000000000..c7b4e3a6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
@@ -0,0 +1,23 @@
+* Core Divider Clock bindings for Marvell MVEBU SoCs
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = nand (NAND clock)
+
+Required properties:
+- compatible : must be "marvell,armada-370-corediv-clock",
+ "marvell,armada-375-corediv-clock",
+ "marvell,armada-380-corediv-clock",
+ "marvell,mv98dx3236-corediv-clock",
+
+- reg : must be the register address of Core Divider control register
+- #clock-cells : from common clock binding; shall be set to 1
+- clocks : must be set to the parent's phandle
+
+Example:
+
+corediv_clk: corediv-clocks@18740 {
+ compatible = "marvell,armada-370-corediv-clock";
+ reg = <0x18740 0xc>;
+ #clock-cells = <1>;
+ clocks = <&pll>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
new file mode 100644
index 000000000..7f28506ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
@@ -0,0 +1,23 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+ "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
+- reg : Address and length of the clock complex register set, followed
+ by address and length of the PMU DFS registers
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+ #clock-cells = <1>;
+ compatible = "marvell,armada-xp-cpu-clock";
+ reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
+ clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
new file mode 100644
index 000000000..de562da2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -0,0 +1,205 @@
+* Gated Clock bindings for Marvell EBU SoCs
+
+Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some
+peripheral clocks to be gated to save some power. The clock consumer
+should specify the desired clock by having the clock ID in its
+"clocks" phandle cell. The clock ID is directly mapped to the
+corresponding clock gating control bit in HW to ease manual clock
+lookup in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID Clock Peripheral
+-----------------------------------
+0 Audio AC97 Cntrl
+1 pex0_en PCIe 0 Clock out
+2 pex1_en PCIe 1 Clock out
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+9 pex1 PCIe Cntrl 1
+15 sata0 SATA Host 0
+17 sdio SDHCI Host
+23 crypto CESA (crypto engine)
+25 tdm Time Division Mplx
+28 ddr DDR Cntrl
+30 sata1 SATA Host 0
+
+The following is a list of provided IDs for Armada 375:
+ID Clock Peripheral
+-----------------------------------
+2 mu Management Unit
+3 pp Packet Processor
+4 ptp PTP
+5 pex0 PCIe 0 Clock out
+6 pex1 PCIe 1 Clock out
+8 audio Audio Cntrl
+11 nd_clk Nand Flash Cntrl
+14 sata0_link SATA 0 Link
+15 sata0_core SATA 0 Core
+16 usb3 USB3 Host
+17 sdio SDHCI Host
+18 usb USB Host
+19 gop Gigabit Ethernet MAC
+20 sata1_link SATA 1 Link
+21 sata1_core SATA 1 Core
+22 xor0 XOR DMA 0
+23 xor1 XOR DMA 0
+24 copro Coprocessor
+25 tdm Time Division Mplx
+28 crypto0_enc Cryptographic Unit Port 0 Encryption
+29 crypto0_core Cryptographic Unit Port 0 Core
+30 crypto1_enc Cryptographic Unit Port 1 Encryption
+31 crypto1_core Cryptographic Unit Port 1 Core
+
+The following is a list of provided IDs for Armada 380/385:
+ID Clock Peripheral
+-----------------------------------
+0 audio Audio
+2 ge2 Gigabit Ethernet 2
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex1 PCIe 1
+6 pex2 PCIe 2
+7 pex3 PCIe 3
+8 pex0 PCIe 0
+9 usb3h0 USB3 Host 0
+10 usb3h1 USB3 Host 1
+11 usb3d USB3 Device
+13 bm Buffer Management
+14 crypto0z Cryptographic 0 Z
+15 sata0 SATA 0
+16 crypto1z Cryptographic 1 Z
+17 sdio SDIO
+18 usb2 USB 2
+21 crypto1 Cryptographic 1
+22 xor0 XOR 0
+23 crypto0 Cryptographic 0
+25 tdm Time Division Multiplexing
+28 xor1 XOR 1
+30 sata1 SATA 1
+
+The following is a list of provided IDs for Armada 39x:
+ID Clock Peripheral
+-----------------------------------
+5 pex1 PCIe 1
+6 pex2 PCIe 2
+7 pex3 PCIe 3
+8 pex0 PCIe 0
+9 usb3h0 USB3 Host 0
+10 usb3h1 USB3 Host 1
+15 sata0 SATA 0
+17 sdio SDIO
+22 xor0 XOR 0
+28 xor1 XOR 1
+
+The following is a list of provided IDs for Armada XP:
+ID Clock Peripheral
+-----------------------------------
+0 audio Audio Cntrl
+1 ge3 Gigabit Ethernet 3
+2 ge2 Gigabit Ethernet 2
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+6 pex1 PCIe Cntrl 1
+7 pex2 PCIe Cntrl 2
+8 pex3 PCIe Cntrl 3
+13 bp
+14 sata0lnk
+15 sata0 SATA Host 0
+16 lcd LCD Cntrl
+17 sdio SDHCI Host
+18 usb0 USB Host 0
+19 usb1 USB Host 1
+20 usb2 USB Host 2
+22 xor0 XOR DMA 0
+23 crypto CESA engine
+25 tdm Time Division Mplx
+28 xor1 XOR DMA 1
+29 sata1lnk
+30 sata1 SATA Host 1
+
+The following is a list of provided IDs for 98dx3236:
+ID Clock Peripheral
+-----------------------------------
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+17 sdio SDHCI Host
+18 usb0 USB Host 0
+22 xor0 XOR DMA 0
+
+The following is a list of provided IDs for Dove:
+ID Clock Peripheral
+-----------------------------------
+0 usb0 USB Host 0
+1 usb1 USB Host 1
+2 ge Gigabit Ethernet
+3 sata SATA Host
+4 pex0 PCIe Cntrl 0
+5 pex1 PCIe Cntrl 1
+8 sdio0 SDHCI Host 0
+9 sdio1 SDHCI Host 1
+10 nand NAND Cntrl
+11 camera Camera Cntrl
+12 i2s0 I2S Cntrl 0
+13 i2s1 I2S Cntrl 1
+15 crypto CESA engine
+21 ac97 AC97 Cntrl
+22 pdma Peripheral DMA
+23 xor0 XOR DMA 0
+24 xor1 XOR DMA 1
+30 gephy Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID Clock Peripheral
+-----------------------------------
+0 ge0 Gigabit Ethernet 0
+2 pex0 PCIe Cntrl 0
+3 usb0 USB Host 0
+4 sdio SDIO Cntrl
+5 tsu Transp. Stream Unit
+6 dunit SDRAM Cntrl
+7 runit Runit
+8 xor0 XOR DMA 0
+9 audio I2S Cntrl 0
+14 sata0 SATA Host 0
+15 sata1 SATA Host 1
+16 xor1 XOR DMA 1
+17 crypto CESA engine
+18 pex1 PCIe Cntrl 1
+19 ge1 Gigabit Ethernet 1
+20 tdm Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
+ "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
+ "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
+ "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
+ "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+ "marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
+ "marvell,dove-gating-clock" - for Dove SoC clock gating
+ "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ /* default parent clock is tclk */
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+ compatible = "marvell,dove-sdhci";
+ /* get clk gate bit 8 (sdio0) */
+ clocks = <&gate_clk 8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt
new file mode 100644
index 000000000..7c3bc8bb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nspire-clock.txt
@@ -0,0 +1,24 @@
+TI-NSPIRE Clocks
+
+Required properties:
+- compatible: Valid compatible properties include:
+ "lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model
+ "lsi,nspire-classic-ahb-divider" for the AHB divider in the older model
+ "lsi,nspire-cx-clock" for the base clock in the CX model
+ "lsi,nspire-classic-clock" for the base clock in the older model
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+Optional:
+- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent
+ clock where it divides the rate from.
+
+Example:
+
+ahb_clk {
+ #clock-cells = <0>;
+ compatible = "lsi,nspire-cx-clock";
+ reg = <0x900B0000 0x4>;
+ clocks = <&base_clk>;
+};
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
new file mode 100644
index 000000000..f82064546
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
@@ -0,0 +1,100 @@
+* Nuvoton NPCM7XX Clock Controller
+
+Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+generates and supplies clocks to all modules within the BMC.
+
+External clocks:
+
+There are six fixed clocks that are generated outside the BMC. All clocks are of
+a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+clk_sysbypck are inputs to the clock controller.
+clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+network. They are set on the device tree, but not used by the clock module. The
+network devices use them directly.
+Example can be found below.
+
+All available clocks are defined as preprocessor macros in:
+dt-bindings/clock/nuvoton,npcm7xx-clock.h
+and can be reused as DT sources.
+
+Required Properties of clock controller:
+
+ - compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
+ Poleg BMC NPCM750
+
+ - reg: physical base address of the clock controller and length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+ clk: clock-controller@f0801000 {
+ compatible = "nuvoton,npcm750-clk";
+ #clock-cells = <1>;
+ reg = <0xf0801000 0x1000>;
+ clock-names = "refclk", "sysbypck", "mcbypck";
+ clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+ };
+
+Example: Required external clocks for network:
+
+ /* external reference clock */
+ clk_refclk: clk-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "refclk";
+ };
+
+ /* external reference clock for cpu. float in normal operation */
+ clk_sysbypck: clk-sysbypck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <800000000>;
+ clock-output-names = "sysbypck";
+ };
+
+ /* external reference clock for MC. float in normal operation */
+ clk_mcbypck: clk-mcbypck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <800000000>;
+ clock-output-names = "mcbypck";
+ };
+
+ /* external clock signal rg1refck, supplied by the phy */
+ clk_rg1refck: clk-rg1refck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "clk_rg1refck";
+ };
+
+ /* external clock signal rg2refck, supplied by the phy */
+ clk_rg2refck: clk-rg2refck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "clk_rg2refck";
+ };
+
+ clk_xin: clk-xin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "clk_xin";
+ };
+
+
+Example: GMAC controller node that consumes two clocks: a generated clk by the
+clock controller and a fixed clock from DT (clk_rg1refck).
+
+ ethernet0: ethernet@f0802000 {
+ compatible = "snps,dwmac";
+ reg = <0xf0802000 0x2000>;
+ interrupts = <0 14 4>;
+ interrupt-names = "macirq";
+ clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+ clock-names = "stmmaceth", "clk_gmac";
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
new file mode 100644
index 000000000..9acea9d93
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
@@ -0,0 +1,63 @@
+NVIDIA Tegra114 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra114-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra114-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA114_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
new file mode 100644
index 000000000..7f02fb4ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -0,0 +1,107 @@
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in the header files
+ <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
+ to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
+ (for Tegra124-specific clocks).
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+- nvidia,external-memory-controller : phandle of the EMC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see
+field RAM_CODE in register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
+ is used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported
+EMC clock rate.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate to which this timing
+relates.
+- nvidia,parent-clock-frequency : Should contain the rate at which the current
+parent of the EMC clock should be running at this timing.
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - emc-parent : the clock that should be the parent of the EMC clock at this
+timing.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock@60006000 {
+ compatible = "nvidia,tegra124-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ nvidia,external-memory-controller = <&emc>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA124_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <112400000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+
+ clock@60006000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+ nvidia,parent-clock-frequency = <408000000>;
+ clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+ clock-names = "emc-parent";
+ };
+ timing-20400000 {
+ clock-frequency = <20400000>;
+ nvidia,parent-clock-frequency = <408000000>;
+ clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+ clock-names = "emc-parent";
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
new file mode 100644
index 000000000..958e0ad78
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -0,0 +1,155 @@
+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+
+Required properties:
+- compatible : should be one of:
+ - "nvidia,tegra124-dfll": for Tegra124
+ - "nvidia,tegra210-dfll": for Tegra210
+- reg : Defines the following set of registers, in the order listed:
+ - registers for the DFLL control logic.
+ - registers for the I2C output logic.
+ - registers for the integrated I2C master controller.
+ - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+ See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - soc: Clock source for the DFLL control logic.
+ - ref: The closed loop reference clock
+ - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+ hardware will start controlling. The regulator will be queried for
+ the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Optional properties for mode selection:
+- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Required properties for PWM mode:
+- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds.
+- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM
+ control is disabled and the PWM output is tristated. Note that this voltage is
+ configured in hardware, typically via a resistor divider.
+- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control
+ is enabled and PWM output is low. Hence, this is the minimum output voltage
+ that the regulator supports when PWM control is enabled.
+- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts
+ corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th
+ duty cycle would be: nvidia,pwm-min-microvolts +
+ nvidia,pwm-voltage-step-microvolts * 2.
+- pinctrl-0: I/O pad configuration when PWM control is enabled.
+- pinctrl-1: I/O pad configuration when PWM control is disabled.
+- pinctrl-names: must include the following entries:
+ - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled.
+ - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled.
+
+Example for I2C:
+
+clock@70110000 {
+ compatible = "nvidia,tegra124-dfll";
+ reg = <0 0x70110000 0 0x100>, /* DFLL control */
+ <0 0x70110000 0 0x100>, /* I2C output control */
+ <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+ <0 0x70110200 0 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA124_CLK_DFLL_REF>,
+ <&tegra_car TEGRA124_CLK_I2C5>;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+ vdd-cpu-supply = <&vdd_cpu>;
+
+ nvidia,sample-rate = <12500>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <10>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+
+ nvidia,i2c-fs-rate = <400000>;
+};
+
+Example for PWM:
+
+clock@70110000 {
+ compatible = "nvidia,tegra124-dfll";
+ reg = <0 0x70110000 0 0x100>, /* DFLL control */
+ <0 0x70110000 0 0x100>, /* I2C output control */
+ <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+ <0 0x70110200 0 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA210_CLK_DFLL_REF>,
+ <&tegra_car TEGRA124_CLK_I2C5>;;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+
+ nvidia,sample-rate = <25000>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <6>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+
+ nvidia,pwm-min-microvolts = <708000>; /* 708mV */
+ nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+ nvidia,pwm-to-pmic;
+ nvidia,pwm-tristate-microvolts = <1000000>;
+ nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */
+
+ pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+ pinctrl-0 = <&dvfs_pwm_active_state>;
+ pinctrl-1 = <&dvfs_pwm_inactive_state>;
+};
+
+/* pinmux nodes added for completeness. Binding doc can be found in:
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ */
+
+pinmux: pinmux@700008d4 {
+ dvfs_pwm_active_state: dvfs_pwm_active {
+ dvfs_pwm_pbb1 {
+ nvidia,pins = "dvfs_pwm_pbb1";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+ dvfs_pwm_pbb1 {
+ nvidia,pins = "dvfs_pwm_pbb1";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
new file mode 100644
index 000000000..6c5901b50
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -0,0 +1,63 @@
+NVIDIA Tegra20 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra20-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra20-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA20_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
new file mode 100644
index 000000000..26f237f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
@@ -0,0 +1,56 @@
+NVIDIA Tegra210 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra210-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra210-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra210-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA210_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
new file mode 100644
index 000000000..63618cde1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -0,0 +1,63 @@
+NVIDIA Tegra30 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra30-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra30-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA30_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
new file mode 100644
index 000000000..20cbca3f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
@@ -0,0 +1,30 @@
+NXP LPC32xx Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-clk"
+- reg: should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+ clock controller
+- clocks: phandles of external oscillators, the list must contain one
+ 32768 Hz oscillator and may have one optional high frequency oscillator
+- clock-names: list of external oscillator clock names, must contain
+ "xtal_32k" and may have optional "xtal"
+
+Examples:
+
+ /* System Control Block */
+ scb {
+ compatible = "simple-bus";
+ ranges = <0x0 0x040004000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clk: clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
new file mode 100644
index 000000000..0aa249409
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
@@ -0,0 +1,22 @@
+NXP LPC32xx USB Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-usb-clk"
+- reg: should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+ USB clock controller
+
+Examples:
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ usbclk: clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
new file mode 100644
index 000000000..b652f3fb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
@@ -0,0 +1,28 @@
+Oxford Semiconductor OXNAS SoC Family Standard Clocks
+================================================
+
+Please also refer to clock-bindings.txt in this directory for common clock
+bindings usage.
+
+Required properties:
+- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk"
+ For OX820, should be "oxsemi,ox820-stdclk"
+- #clock-cells: 1, see below
+
+Parent node should have the following properties :
+- compatible: For OX810SE, should be
+ "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+ For OX820, should be
+ "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
+
+example:
+
+sys: sys-ctrl@000000 {
+ compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+ reg = <0x000000 0x100000>;
+
+ stdclk: stdclk {
+ compatible = "oxsemi,ox810se-stdclk";
+ #clock-cells = <1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt
new file mode 100644
index 000000000..868db499e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pistachio-clock.txt
@@ -0,0 +1,123 @@
+Imagination Technologies Pistachio SoC clock controllers
+========================================================
+
+Pistachio has four clock controllers (core clock, peripheral clock, peripheral
+general control, and top general control) which are instantiated individually
+from the device-tree.
+
+External clocks:
+----------------
+
+There are three external inputs to the clock controllers which should be
+defined with the following clock-output-names:
+- "xtal": External 52Mhz oscillator (required)
+- "audio_clk_in": Alternate audio reference clock (optional)
+- "enet_clk_in": Alternate ethernet PHY clock (optional)
+
+Core clock controller:
+----------------------
+
+The core clock controller generates clocks for the CPU, RPU (WiFi + BT
+co-processor), audio, and several peripherals.
+
+Required properties:
+- compatible: Must be "img,pistachio-clk".
+- reg: Must contain the base address and length of the core clock controller.
+- #clock-cells: Must be 1. The single cell is the clock identifier.
+ See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "xtal" (see "External clocks") and
+ "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the
+ top-level general control.
+
+Example:
+ clk_core: clock-controller@18144000 {
+ compatible = "img,pistachio-clk";
+ reg = <0x18144000 0x800>;
+ clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+ <&cr_top EXT_CLK_ENET_IN>;
+ clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";
+
+ #clock-cells = <1>;
+ };
+
+Peripheral clock controller:
+----------------------------
+
+The peripheral clock controller generates clocks for the DDR, ROM, and other
+peripherals. The peripheral system clock ("periph_sys") generated by the core
+clock controller is the input clock to the peripheral clock controller.
+
+Required properties:
+- compatible: Must be "img,pistachio-periph-clk".
+- reg: Must contain the base address and length of the peripheral clock
+ controller.
+- #clock-cells: Must be 1. The single cell is the clock identifier.
+ See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "periph_sys", the peripheral system clock generated
+ by the core clock controller.
+
+Example:
+ clk_periph: clock-controller@18144800 {
+ compatible = "img,pistachio-clk-periph";
+ reg = <0x18144800 0x800>;
+ clocks = <&clk_core CLK_PERIPH_SYS>;
+ clock-names = "periph_sys";
+
+ #clock-cells = <1>;
+ };
+
+Peripheral general control:
+---------------------------
+
+The peripheral general control block generates system interface clocks and
+resets for various peripherals. It also contains miscellaneous peripheral
+control registers. The system clock ("sys") generated by the peripheral clock
+controller is the input clock to the system clock controller.
+
+Required properties:
+- compatible: Must include "img,pistachio-periph-cr" and "syscon".
+- reg: Must contain the base address and length of the peripheral general
+ control registers.
+- #clock-cells: Must be 1. The single cell is the clock identifier.
+ See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "sys", the system clock generated by the peripheral
+ clock controller.
+
+Example:
+ cr_periph: syscon@18144800 {
+ compatible = "img,pistachio-cr-periph", "syscon";
+ reg = <0x18148000 0x1000>;
+ clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>;
+ clock-names = "sys";
+
+ #clock-cells = <1>;
+ };
+
+Top-level general control:
+--------------------------
+
+The top-level general control block contains miscellaneous control registers and
+gates for the external clocks "audio_clk_in" and "enet_clk_in".
+
+Required properties:
+- compatible: Must include "img,pistachio-cr-top" and "syscon".
+- reg: Must contain the base address and length of the top-level
+ control registers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
+ "External clocks").
+- #clock-cells: Must be 1. The single cell is the clock identifier.
+ See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+
+Example:
+ cr_top: syscon@18144800 {
+ compatible = "img,pistachio-cr-top", "syscon";
+ reg = <0x18149000 0x200>;
+ clocks = <&audio_refclk>, <&ext_enet_in>;
+ clock-names = "audio_clk_in", "enet_clk_in";
+
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/prima2-clock.txt b/Documentation/devicetree/bindings/clock/prima2-clock.txt
new file mode 100644
index 000000000..5016979c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/prima2-clock.txt
@@ -0,0 +1,73 @@
+* Clock bindings for CSR SiRFprimaII
+
+Required properties:
+- compatible: Should be "sirf,prima2-clkc"
+- reg: Address and length of the register set
+- interrupts: Should contain clock controller interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of prima2
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ rtc 0
+ osc 1
+ pll1 2
+ pll2 3
+ pll3 4
+ mem 5
+ sys 6
+ security 7
+ dsp 8
+ gps 9
+ mf 10
+ io 11
+ cpu 12
+ uart0 13
+ uart1 14
+ uart2 15
+ tsc 16
+ i2c0 17
+ i2c1 18
+ spi0 19
+ spi1 20
+ pwmc 21
+ efuse 22
+ pulse 23
+ dmac0 24
+ dmac1 25
+ nand 26
+ audio 27
+ usp0 28
+ usp1 29
+ usp2 30
+ vip 31
+ gfx 32
+ mm 33
+ lcd 34
+ vpp 35
+ mmc01 36
+ mmc23 37
+ mmc45 38
+ usbpll 39
+ usb0 40
+ usb1 41
+
+Examples:
+
+clks: clock-controller@88000000 {
+ compatible = "sirf,prima2-clkc";
+ reg = <0x88000000 0x1000>;
+ interrupts = <3>;
+ #clock-cells = <1>;
+};
+
+i2c0: i2c@b00e0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00e0000 0x10000>;
+ interrupts = <24>;
+ clocks = <&clks 17>;
+};
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt
new file mode 100644
index 000000000..83db876b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt
@@ -0,0 +1,26 @@
+Binding for an external clock signal driven by a PWM pin.
+
+This binding uses the common clock binding[1] and the common PWM binding[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/pwm/pwm.txt
+
+Required properties:
+- compatible : shall be "pwm-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- pwms : from common PWM binding; this determines the clock frequency
+ via the period given in the PWM specifier.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+- clock-frequency : Exact output frequency, in case the PWM period
+ is not exact but was rounded to nanoseconds.
+
+Example:
+ clock {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "mipi_mclk";
+ pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+ };
diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt
new file mode 100644
index 000000000..8f6723941
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt
@@ -0,0 +1,15 @@
+* Clock bindings for Marvell PXA chips
+
+Required properties:
+- compatible: Should be "marvell,pxa-clocks"
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell (see include/.../pxa-clock.h).
+
+Examples:
+
+pxa2xx_clks: pxa2xx_clks@41300004 {
+ compatible = "marvell,pxa-clocks";
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
new file mode 100644
index 000000000..241fb0545
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
@@ -0,0 +1,33 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
+
+The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-pll" and one of the following
+ fallbacks:
+ - "qca,ar7100-pll"
+ - "qca,ar7240-pll"
+ - "qca,ar9130-pll"
+ - "qca,ar9330-pll"
+ - "qca,ar9340-pll"
+ - "qca,qca9550-pll"
+- reg: Base address and size of the controllers memory area
+- clock-names: Name of the input clock, has to be "ref"
+- clocks: phandle of the external reference clock
+- #clock-cells: has to be one
+
+Optional properties:
+- clock-output-names: should be "cpu", "ddr", "ahb"
+
+Example:
+
+ pll-controller@18050000 {
+ compatible = "qca,ar9132-pll", "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ clocks = <&extosc>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
new file mode 100644
index 000000000..db3d0ea6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A53 PLL Binding
+
+maintainers:
+ - Sivaprakash Murugesan <sivaprak@codeaurora.org>
+
+description:
+ The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
+ frequencies above 1GHz.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq6018-a53pll
+ - qcom,msm8916-a53pll
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 0
+
+ clocks:
+ items:
+ - description: board XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ #Example 1 - A53 PLL found on MSM8916 devices
+ - |
+ a53pll: clock@b016000 {
+ compatible = "qcom,msm8916-a53pll";
+ reg = <0xb016000 0x40>;
+ #clock-cells = <0>;
+ };
+ #Example 2 - A53 PLL found on IPQ6018 devices
+ - |
+ a53pll_ipq: clock-controller@b116000 {
+ compatible = "qcom,ipq6018-a53pll";
+ reg = <0x0b116000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo>;
+ clock-names = "xo";
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
new file mode 100644
index 000000000..c5eb6694f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
@@ -0,0 +1,18 @@
+Qualcomm Camera Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-camcc".
+- reg : shall contain base register location and length.
+- #clock-cells : from common clock binding, shall contain 1.
+- #reset-cells : from common reset binding, shall contain 1.
+- #power-domain-cells : from generic power domain binding, shall contain 1.
+
+Example:
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sdm845-camcc";
+ reg = <0xad00000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
new file mode 100644
index 000000000..0cdf53f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+
+maintainers:
+ - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+ Qualcomm display clock control module which supports the clocks, resets and
+ power domains on SM8150 and SM8250.
+
+ See also:
+ dt-bindings/clock/qcom,dispcc-sm8150.h
+ dt-bindings/clock/qcom,dispcc-sm8250.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8150-dispcc
+ - qcom,sm8250-dispcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+ - description: Byte clock from DSI PHY1
+ - description: Pixel clock from DSI PHY1
+ - description: Link clock from DP PHY
+ - description: VCO DIV clock from DP PHY
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: dsi0_phy_pll_out_byteclk
+ - const: dsi0_phy_pll_out_dsiclk
+ - const: dsi1_phy_pll_out_byteclk
+ - const: dsi1_phy_pll_out_dsiclk
+ - const: dp_phy_pll_link_clk
+ - const: dp_phy_pll_vco_div_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@af00000 {
+ compatible = "qcom,sm8250-dispcc";
+ reg = <0x0af00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
+ <&dp_phy 0>,
+ <&dp_phy 1>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
new file mode 100644
index 000000000..eacccc88b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on APQ8064.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-msm8960.h
+ - dt-bindings/reset/qcom,gcc-msm8960.h
+
+properties:
+ compatible:
+ const: qcom,gcc-apq8064
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ nvmem-cells:
+ minItems: 1
+ maxItems: 2
+ description:
+ Qualcomm TSENS (thermal sensor device) on some devices can
+ be part of GCC and hence the TSENS properties can also be part
+ of the GCC/clock-controller node.
+ For more details on the TSENS properties please refer
+ Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+
+ nvmem-cell-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: calib
+ - const: calib_backup
+
+ '#thermal-sensor-cells':
+ const: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+ - nvmem-cells
+ - nvmem-cell-names
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@900000 {
+ compatible = "qcom,gcc-apq8064";
+ reg = <0x00900000 0x4000>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ #thermal-sensor-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
new file mode 100644
index 000000000..98572b4a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on IPQ8074.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-ipq8074.h
+
+properties:
+ compatible:
+ const: qcom,gcc-ipq8074
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq8074";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
new file mode 100644
index 000000000..005e0edd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on MSM8996.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-msm8996.h
+
+properties:
+ compatible:
+ const: qcom,gcc-msm8996
+
+ clocks:
+ minItems: 3
+ items:
+ - description: XO source
+ - description: Second XO source
+ - description: Sleep clock source
+ - description: PCIe 0 PIPE clock (optional)
+ - description: PCIe 1 PIPE clock (optional)
+ - description: PCIe 2 PIPE clock (optional)
+ - description: USB3 PIPE clock (optional)
+ - description: UFS RX symbol 0 clock (optional)
+ - description: UFS RX symbol 1 clock (optional)
+ - description: UFS TX symbol 0 clock (optional)
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: cxo
+ - const: cxo2
+ - const: sleep_clk
+ - const: pcie_0_pipe_clk_src
+ - const: pcie_1_pipe_clk_src
+ - const: pcie_2_pipe_clk_src
+ - const: usb3_phy_pipe_clk_src
+ - const: ufs_rx_symbol_0_clk_src
+ - const: ufs_rx_symbol_1_clk_src
+ - const: ufs_tx_symbol_0_clk_src
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@300000 {
+ compatible = "qcom,gcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x300000 0x90000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
new file mode 100644
index 000000000..a0bb71392
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on MSM8998.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-msm8998.h
+
+properties:
+ compatible:
+ const: qcom,gcc-msm8998
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: USB 3.0 phy pipe clock
+ - description: UFS phy rx symbol clock for pipe 0
+ - description: UFS phy rx symbol clock for pipe 1
+ - description: UFS phy tx symbol clock
+ - description: PCIE phy pipe clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+ - const: usb3_pipe
+ - const: ufs_rx_symbol0
+ - const: ufs_rx_symbol1
+ - const: ufs_tx_symbol0
+ - const: pcie0_pipe
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-msm8998";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x00100000 0xb0000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "sleep_clk",
+ "usb3_pipe",
+ "ufs_rx_symbol0",
+ "ufs_rx_symbol1",
+ "ufs_tx_symbol0",
+ "pcie0_pipe";
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
new file mode 100644
index 000000000..ce06f3f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on QCS404.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-qcs404.h
+
+properties:
+ compatible:
+ const: qcom,gcc-qcs404
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,gcc-qcs404";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
new file mode 100644
index 000000000..a404c8fbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on SC7180.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-sc7180.h
+
+properties:
+ compatible:
+ const: qcom,gcc-sc7180
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Sleep clock source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: bi_tcxo_ao
+ - const: sleep_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-sc7180";
+ reg = <0x00100000 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
new file mode 100644
index 000000000..12766a866
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on SM8150.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-sm8150.h
+
+properties:
+ compatible:
+ const: qcom,gcc-sm8150
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: sleep_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-sm8150";
+ reg = <0x00100000 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
new file mode 100644
index 000000000..80bd6caf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8250
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on SM8250.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-sm8250.h
+
+properties:
+ compatible:
+ const: qcom,gcc-sm8250
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: sleep_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-sm8250";
+ reg = <0x00100000 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
new file mode 100644
index 000000000..ee0467fb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains.
+
+ See also:
+ - dt-bindings/clock/qcom,gcc-apq8084.h
+ - dt-bindings/reset/qcom,gcc-apq8084.h
+ - dt-bindings/clock/qcom,gcc-ipq4019.h
+ - dt-bindings/clock/qcom,gcc-ipq6018.h
+ - dt-bindings/reset/qcom,gcc-ipq6018.h
+ - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+ - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+ - dt-bindings/clock/qcom,gcc-msm8939.h
+ - dt-bindings/reset/qcom,gcc-msm8939.h
+ - dt-bindings/clock/qcom,gcc-msm8660.h
+ - dt-bindings/reset/qcom,gcc-msm8660.h
+ - dt-bindings/clock/qcom,gcc-msm8974.h
+ - dt-bindings/reset/qcom,gcc-msm8974.h
+ - dt-bindings/clock/qcom,gcc-msm8994.h
+ - dt-bindings/clock/qcom,gcc-mdm9615.h
+ - dt-bindings/reset/qcom,gcc-mdm9615.h
+ - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+ - dt-bindings/clock/qcom,gcc-sdm845.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,gcc-apq8084
+ - qcom,gcc-ipq4019
+ - qcom,gcc-ipq6018
+ - qcom,gcc-ipq8064
+ - qcom,gcc-msm8660
+ - qcom,gcc-msm8916
+ - qcom,gcc-msm8939
+ - qcom,gcc-msm8960
+ - qcom,gcc-msm8974
+ - qcom,gcc-msm8974pro
+ - qcom,gcc-msm8974pro-ac
+ - qcom,gcc-msm8994
+ - qcom,gcc-mdm9615
+ - qcom,gcc-sdm630
+ - qcom,gcc-sdm660
+ - qcom,gcc-sdm845
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ # Example for GCC for MSM8960:
+ - |
+ clock-controller@900000 {
+ compatible = "qcom,gcc-msm8960";
+ reg = <0x900000 0x4000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
new file mode 100644
index 000000000..df943c4c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm graphics clock control module which supports the clocks, resets and
+ power domains on SDM845/SC7180/SM8150/SM8250.
+
+ See also:
+ dt-bindings/clock/qcom,gpucc-sdm845.h
+ dt-bindings/clock/qcom,gpucc-sc7180.h
+ dt-bindings/clock/qcom,gpucc-sm8150.h
+ dt-bindings/clock/qcom,gpucc-sm8250.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sdm845-gpucc
+ - qcom,sc7180-gpucc
+ - qcom,sm8150-gpucc
+ - qcom,sm8250-gpucc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 main branch source
+ - description: GPLL0 div branch source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: gcc_gpu_gpll0_clk_src
+ - const: gcc_gpu_gpll0_div_clk_src
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@5090000 {
+ compatible = "qcom,sdm845-gpucc";
+ reg = <0x05090000 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
new file mode 100644
index 000000000..ec02a0244
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
@@ -0,0 +1,60 @@
+High-Frequency PLL (HFPLL)
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>:
+ shall contain only one of the following. The generic
+ compatible "qcom,hfpll" should be also included.
+
+ "qcom,hfpll-ipq8064", "qcom,hfpll"
+ "qcom,hfpll-apq8064", "qcom,hfpll"
+ "qcom,hfpll-msm8974", "qcom,hfpll"
+ "qcom,hfpll-msm8960", "qcom,hfpll"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: address and size of HPLL registers. An optional second
+ element specifies the address and size of the alias
+ register region.
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the xo clock.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "xo".
+
+- clock-output-names:
+ Usage: required
+ Value type: <string>
+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
+ starting at 0. Otherwise hfpll_Y where Y is more specific
+ such as "l2".
+
+Example:
+
+1) An HFPLL for the L2 cache.
+
+ clock-controller@f9016000 {
+ compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+ reg = <0xf9016000 0x30>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ clock-output-names = "hfpll_l2";
+ };
+
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
+
+ clock-controller@f908a000 {
+ compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ clock-output-names = "hfpll0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
new file mode 100644
index 000000000..030ba60da
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
@@ -0,0 +1,34 @@
+Krait Clock Controller
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,krait-cc-v1"
+ "qcom,krait-cc-v2"
+
+- #clock-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the clock parents of hfpll, secondary muxes.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb".
+
+Example:
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>;
+ clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb";
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
new file mode 100644
index 000000000..a3c78aa88
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
@@ -0,0 +1,22 @@
+Qualcomm LPASS Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+ "qcom,lcc-msm8960"
+ "qcom,lcc-apq8064"
+ "qcom,lcc-ipq8064"
+ "qcom,lcc-mdm9615"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+ clock-controller@28000000 {
+ compatible = "qcom,lcc-ipq8064";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
new file mode 100644
index 000000000..b9e978704
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
@@ -0,0 +1,26 @@
+Qualcomm LPASS Clock Controller Binding
+-----------------------------------------------
+
+Required properties :
+- compatible : shall contain "qcom,sdm845-lpasscc"
+- #clock-cells : from common clock binding, shall contain 1.
+- reg : shall contain base register address and size,
+ in the order
+ Index-0 maps to LPASS_CC register region
+ Index-1 maps to LPASS_QDSP6SS register region
+
+Optional properties :
+- reg-names : register names of LPASS domain
+ "cc", "qdsp6ss".
+
+Example:
+
+The below node has to be defined in the cases where the LPASS peripheral loader
+would bring the subsystem out of reset.
+
+ lpasscc: clock-controller@17014000 {
+ compatible = "qcom,sdm845-lpasscc";
+ reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+ reg-names = "cc", "qdsp6ss";
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
new file mode 100644
index 000000000..af32dee14
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multimedia Clock & Reset Controller Binding
+
+maintainers:
+ - Jeffrey Hugo <jhugo@codeaurora.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm multimedia clock control module which supports the clocks, resets and
+ power domains.
+
+properties:
+ compatible:
+ enum:
+ - qcom,mmcc-apq8064
+ - qcom,mmcc-apq8084
+ - qcom,mmcc-msm8660
+ - qcom,mmcc-msm8960
+ - qcom,mmcc-msm8974
+ - qcom,mmcc-msm8996
+ - qcom,mmcc-msm8998
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board sleep source
+ - description: Global PLL 0 clock
+ - description: DSI phy instance 0 dsi clock
+ - description: DSI phy instance 0 byte clock
+ - description: DSI phy instance 1 dsi clock
+ - description: DSI phy instance 1 byte clock
+ - description: HDMI phy PLL clock
+ - description: DisplayPort phy PLL vco clock
+ - description: DisplayPort phy PLL link clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep
+ - const: gpll0
+ - const: dsi0dsi
+ - const: dsi0byte
+ - const: dsi1dsi
+ - const: dsi1byte
+ - const: hdmipll
+ - const: dpvco
+ - const: dplink
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding
+
+ vdd-gfx-supply:
+ description:
+ Regulator supply for the GPU_GX GDSC
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,mmcc-msm8998
+
+then:
+ required:
+ - clocks
+ - clock-names
+
+examples:
+ # Example for MMCC for MSM8960:
+ - |
+ clock-controller@4000000 {
+ compatible = "qcom,mmcc-msm8960";
+ reg = <0x4000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
new file mode 100644
index 000000000..a20cb1063
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm clock controller for MSM8996 CPUs
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+ Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster
+ and clock 1 is for Perf cluster.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8996-apcc
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: Primary PLL clock for power cluster (little)
+ - description: Primary PLL clock for perf cluster (big)
+ - description: Alternate PLL clock for power cluster (little)
+ - description: Alternate PLL clock for perf cluster (big)
+
+ clock-names:
+ items:
+ - const: pwrcl_pll
+ - const: perfcl_pll
+ - const: pwrcl_alt_pll
+ - const: perfcl_alt_pll
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ kryocc: clock-controller@6400000 {
+ compatible = "qcom,msm8996-apcc";
+ reg = <0x6400000 0x90000>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
new file mode 100644
index 000000000..d747bb58f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm graphics clock control module which supports the clocks, resets and
+ power domains on MSM8998.
+
+ See also dt-bindings/clock/qcom,gpucc-msm8998.h.
+
+properties:
+ compatible:
+ const: qcom,msm8998-gpucc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 main branch source (gcc_gpu_gpll0_clk_src)
+
+ clock-names:
+ items:
+ - const: xo
+ - const: gpll0
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ clock-controller@5065000 {
+ compatible = "qcom,msm8998-gpucc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x05065000 0x9000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0_OUT_MAIN>;
+ clock-names = "xo", "gpll0";
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
new file mode 100644
index 000000000..bbaaf1e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,q6sstopcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Q6SSTOP clock Controller
+
+maintainers:
+ - Govind Singh <govinds@codeaurora.org>
+
+properties:
+ compatible:
+ const: "qcom,qcs404-q6sstopcc"
+
+ reg:
+ items:
+ - description: Q6SSTOP clocks register region
+ - description: Q6SSTOP_TCSR register region
+
+ clocks:
+ items:
+ - description: ahb clock for the q6sstopCC
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ q6sstopcc: clock-controller@7500000 {
+ compatible = "qcom,qcs404-q6sstopcc";
+ reg = <0x07500000 0x4e000>, <0x07550000 0x10000>;
+ clocks = <&gcc 141>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
new file mode 100644
index 000000000..b44a0622f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -0,0 +1,57 @@
+Qualcomm RPM Clock Controller Binding
+------------------------------------------------
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+Required properties :
+- compatible : shall contain only one of the following. The generic
+ compatible "qcom,rpmcc" should be also included.
+
+ "qcom,rpmcc-msm8660", "qcom,rpmcc"
+ "qcom,rpmcc-apq8060", "qcom,rpmcc"
+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
+ "qcom,rpmcc-msm8936", "qcom,rpmcc"
+ "qcom,rpmcc-msm8974", "qcom,rpmcc"
+ "qcom,rpmcc-msm8976", "qcom,rpmcc"
+ "qcom,rpmcc-apq8064", "qcom,rpmcc"
+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
+ "qcom,rpmcc-msm8992",·"qcom,rpmcc"
+ "qcom,rpmcc-msm8994",·"qcom,rpmcc"
+ "qcom,rpmcc-msm8996", "qcom,rpmcc"
+ "qcom,rpmcc-msm8998", "qcom,rpmcc"
+ "qcom,rpmcc-qcs404", "qcom,rpmcc"
+ "qcom,rpmcc-sdm660", "qcom,rpmcc"
+
+- #clock-cells : shall contain 1
+
+The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h>
+and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock
+is an "active" clock, which means that the consumer only care that the
+clock is available when the apps CPU subsystem is active, i.e. not
+suspended or in deep idle. If it is important that the clock keeps running
+during system suspend, you need to specify the non-active clock, the one
+not containing *_A_* in the enumerator name.
+
+Example:
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
new file mode 100644
index 000000000..a46a3a799
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Clocks Bindings
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Resource Power Manager Hardened (RPMh) manages shared resources on
+ some Qualcomm Technologies Inc. SoCs. It accepts clock requests from
+ other hardware subsystems via RSC to control clocks.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7180-rpmh-clk
+ - qcom,sdm845-rpmh-clk
+ - qcom,sm8150-rpmh-clk
+ - qcom,sm8250-rpmh-clk
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xo
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Example for GCC for SDM845: The below node should be defined inside
+ # &apps_rsc node.
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ rpmhcc: clock-controller {
+ compatible = "qcom,sdm845-rpmh-clk";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
new file mode 100644
index 000000000..e94847f92
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SC7180
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm display clock control module which supports the clocks, resets and
+ power domains on SC7180.
+
+ See also dt-bindings/clock/qcom,dispcc-sc7180.h.
+
+properties:
+ compatible:
+ const: qcom,sc7180-dispcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 source from GCC
+ - description: Byte clock from DSI PHY
+ - description: Pixel clock from DSI PHY
+ - description: Link clock from DP PHY
+ - description: VCO DIV clock from DP PHY
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: gcc_disp_gpll0_clk_src
+ - const: dsi0_phy_pll_out_byteclk
+ - const: dsi0_phy_pll_out_dsiclk
+ - const: dp_phy_pll_link_clk
+ - const: dp_phy_pll_vco_div_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@af00000 {
+ compatible = "qcom,sc7180-dispcc";
+ reg = <0x0af00000 0x200000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&dsi_phy 0>,
+ <&dsi_phy 1>,
+ <&dp_phy 0>,
+ <&dp_phy 1>;
+ clock-names = "bi_tcxo",
+ "gcc_disp_gpll0_clk_src",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
new file mode 100644
index 000000000..c54172fbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller Binding for SC7180
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm LPASS core clock control module which supports the clocks and
+ power domains on SC7180.
+
+ See also:
+ - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7180-lpasshm
+ - qcom,sc7180-lpasscorecc
+
+ clocks:
+ items:
+ - description: gcc_lpass_sway clock from GCC
+ - description: Board XO source
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bi_tcxo
+
+ power-domains:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ minItems: 1
+ items:
+ - description: lpass core cc register
+ - description: lpass audio cc register
+
+ reg-names:
+ items:
+ - const: lpass_core_cc
+ - const: lpass_audio_cc
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sc7180-lpasshm
+then:
+ properties:
+ reg:
+ maxItems: 1
+
+else:
+ properties:
+ reg:
+ minItems: 2
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+ clock-controller@63000000 {
+ compatible = "qcom,sc7180-lpasshm";
+ reg = <0x63000000 0x28>;
+ clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bi_tcxo";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+ clock-controller@62d00000 {
+ compatible = "qcom,sc7180-lpasscorecc";
+ reg = <0x62d00000 0x50000>, <0x62780000 0x30000>;
+ reg-names = "lpass_core_cc", "lpass_audio_cc";
+ clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bi_tcxo";
+ power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
new file mode 100644
index 000000000..970030986
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Modem Clock Controller Binding for SC7180
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm modem clock control module which supports the clocks on SC7180.
+
+ See also:
+ - dt-bindings/clock/qcom,mss-sc7180.h
+
+properties:
+ compatible:
+ const: qcom,sc7180-mss
+
+ clocks:
+ items:
+ - description: gcc_mss_mfab_axi clock from GCC
+ - description: gcc_mss_nav_axi clock from GCC
+ - description: gcc_mss_cfg_ahb clock from GCC
+
+ clock-names:
+ items:
+ - const: gcc_mss_mfab_axis
+ - const: gcc_mss_nav_axi
+ - const: cfg_ahb
+
+ '#clock-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ clock-controller@41a8000 {
+ compatible = "qcom,sc7180-mss";
+ reg = <0x041a8000 0x8000>;
+ clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+ <&gcc GCC_MSS_NAV_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>;
+ clock-names = "gcc_mss_mfab_axis",
+ "gcc_mss_nav_axi",
+ "cfg_ahb";
+ #clock-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
new file mode 100644
index 000000000..4a3be733d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SDM845
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm display clock control module which supports the clocks, resets and
+ power domains on SDM845.
+
+ See also dt-bindings/clock/qcom,dispcc-sdm845.h.
+
+properties:
+ compatible:
+ const: qcom,sdm845-dispcc
+
+ # NOTE: sdm845.dtsi existed for quite some time and specified no clocks.
+ # The code had to use hardcoded mechanisms to find the input clocks.
+ # New dts files should have these clocks.
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 source from GCC
+ - description: GPLL0 div source from GCC
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+ - description: Byte clock from DSI PHY1
+ - description: Pixel clock from DSI PHY1
+ - description: Link clock from DP PHY
+ - description: VCO DIV clock from DP PHY
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: gcc_disp_gpll0_clk_src
+ - const: gcc_disp_gpll0_div_clk_src
+ - const: dsi0_phy_pll_out_byteclk
+ - const: dsi0_phy_pll_out_dsiclk
+ - const: dsi1_phy_pll_out_byteclk
+ - const: dsi1_phy_pll_out_dsiclk
+ - const: dp_link_clk_divsel_ten
+ - const: dp_vco_divided_clk_src_mux
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@af00000 {
+ compatible = "qcom,sdm845-dispcc";
+ reg = <0x0af00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
+ <&dp_phy 0>,
+ <&dp_phy 1>;
+ clock-names = "bi_tcxo",
+ "gcc_disp_gpll0_clk_src",
+ "gcc_disp_gpll0_div_clk_src",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_link_clk_divsel_ten",
+ "dp_vco_divided_clk_src_mux";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
new file mode 100644
index 000000000..7474aba36
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
@@ -0,0 +1,59 @@
+Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv)
+
+clkdiv configures the clock frequency of a set of outputs on the PMIC.
+These clocks are typically wired through alternate functions on
+gpio pins.
+
+=======================
+Properties
+=======================
+
+- compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,spmi-clkdiv".
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address of CLKDIV peripherals.
+
+- qcom,num-clkdivs
+ Usage: required
+ Value type: <u32>
+ Definition: number of CLKDIV peripherals.
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the xo clock.
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "xo".
+
+- #clock-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: shall contain 1.
+
+=======
+Example
+=======
+
+pm8998_clk_divs: clock-controller@5b00 {
+ compatible = "qcom,spmi-clkdiv";
+ reg = <0x5b00>;
+ #clock-cells = <1>;
+ qcom,num-clkdivs = <3>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ assigned-clocks = <&pm8998_clk_divs 1>,
+ <&pm8998_clk_divs 2>,
+ <&pm8998_clk_divs 3>;
+ assigned-clock-rates = <9600000>,
+ <9600000>,
+ <9600000>;
+};
diff --git a/Documentation/devicetree/bindings/clock/qcom,turingcc.txt b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt
new file mode 100644
index 000000000..126517de5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt
@@ -0,0 +1,19 @@
+Qualcomm Turing Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible: shall contain "qcom,qcs404-turingcc".
+- reg: shall contain base register location and length.
+- clocks: ahb clock for the TuringCC
+- #clock-cells: from common clock binding, shall contain 1.
+- #reset-cells: from common reset binding, shall contain 1.
+
+Example:
+ turingcc: clock-controller@800000 {
+ compatible = "qcom,qcs404-turingcc";
+ reg = <0x00800000 0x30000>;
+ clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
new file mode 100644
index 000000000..567202942
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller Binding
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm video clock control module which supports the clocks, resets and
+ power domains on SDM845/SC7180/SM8150/SM8250.
+
+ See also:
+ dt-bindings/clock/qcom,videocc-sc7180.h
+ dt-bindings/clock/qcom,videocc-sdm845.h
+ dt-bindings/clock/qcom,videocc-sm8150.h
+ dt-bindings/clock/qcom,videocc-sm8250.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7180-videocc
+ - qcom,sdm845-videocc
+ - qcom,sm8150-videocc
+ - qcom,sm8250-videocc
+
+ clocks:
+ items:
+ - description: Board XO source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@ab00000 {
+ compatible = "qcom,sdm845-videocc";
+ reg = <0x0ab00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
new file mode 100644
index 000000000..f7d48f23d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -0,0 +1,211 @@
+* Clock Block on Freescale QorIQ Platforms
+
+Freescale QorIQ chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+
+Chassis Version Example Chips
+--------------- -------------
+1.0 p4080, p5020, p5040
+2.0 t4240, b4860
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a chip-specific clock block compatible
+ string and (if applicable) may contain a chassis-version clock
+ compatible string.
+
+ Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
+ * "fsl,p2041-clockgen"
+ * "fsl,p3041-clockgen"
+ * "fsl,p4080-clockgen"
+ * "fsl,p5020-clockgen"
+ * "fsl,p5040-clockgen"
+ * "fsl,t1023-clockgen"
+ * "fsl,t1024-clockgen"
+ * "fsl,t1040-clockgen"
+ * "fsl,t1042-clockgen"
+ * "fsl,t2080-clockgen"
+ * "fsl,t2081-clockgen"
+ * "fsl,t4240-clockgen"
+ * "fsl,b4420-clockgen"
+ * "fsl,b4860-clockgen"
+ * "fsl,ls1012a-clockgen"
+ * "fsl,ls1021a-clockgen"
+ * "fsl,ls1028a-clockgen"
+ * "fsl,ls1043a-clockgen"
+ * "fsl,ls1046a-clockgen"
+ * "fsl,ls1088a-clockgen"
+ * "fsl,ls2080a-clockgen"
+ Chassis-version clock strings include:
+ * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+ * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+ address space defined by its parent bus, and resource zero
+ represents the clock register set
+
+Optional properties:
+- ranges: Allows valid translation between child's address space and
+ parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+ physical base addresses. Must be present if the device has
+ sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+ the size of an address. Must be present if the device has
+ sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+ as an input clock. Either clock-frequency or clocks must be
+ provided.
+ A second input clock, called "coreclk", may be provided if
+ core PLLs are based on a different input clock from the
+ platform PLL.
+- clock-names: Required if a coreclk is present. Valid names are
+ "sysclk" and "coreclk".
+
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+ Type# Name Index Cell
+ 0 sysclk must be 0
+ 1 cmux index (n in CLKCnCSR)
+ 2 hwaccel index (n in CLKCGnHWACSR)
+ 3 fman 0 for fm1, 1 for fm2
+ 4 platform pll n=pll/(n+1). For example, when n=1,
+ that means output_freq=PLL_freq/2.
+ 5 coreclk must be 0
+
+3. Example
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ clock-frequency = <133333333>;
+ reg = <0xe1000 0x1000>;
+ #clock-cells = <2>;
+ };
+
+ fman@400000 {
+ ...
+ clocks = <&clockgen 3 0>;
+ ...
+ };
+}
+4. Legacy Child Nodes
+
+NOTE: These nodes are deprecated. Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+ * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+ * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+ * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+ * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+ * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+ It takes parent's clock-frequency as its clock.
+ * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+ It takes parent's clock-frequency as its clock.
+ * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
+ * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
+- #clock-cells: From common clock binding. The number of cells in a
+ clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+ clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+ For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+ clock-specifier cell may take the following values:
+ * 0 - equal to the PLL frequency
+ * 1 - equal to the PLL frequency divided by 2
+ * 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+ output clocks
+- reg: Should be the offset and length of clock block base address.
+ The length should be 4.
+
+Legacy Example:
+/ {
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ clock-frequency = <133333333>;
+ reg = <0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ };
+
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+
+ platform-pll: platform-pll@c00 {
+ #clock-cells = <1>;
+ reg = <0xc00 0x4>;
+ compatible = "fsl,qoriq-platform-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "platform-pll", "platform-pll-div2";
+ };
+ };
+};
+
+Example for legacy clock consumer:
+
+/ {
+ cpu0: PowerPC,e5500@0 {
+ ...
+ clocks = <&mux0>;
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
new file mode 100644
index 000000000..9185d1017
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Clock Pulse Generator (CPG) generates core clocks for the SoC. It
+ includes PLLs, and fixed and variable ratio dividers.
+
+ The CPG may also provide a Clock Domain for SoC devices, in combination with
+ the CPG Module Stop (MSTP) Clocks.
+
+properties:
+ compatible:
+ oneOf:
+ - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
+ - const: renesas,r8a7740-cpg-clocks # R-Mobile A1
+ - const: renesas,r8a7778-cpg-clocks # R-Car M1
+ - const: renesas,r8a7779-cpg-clocks # R-Car H1
+ - items:
+ - enum:
+ - renesas,r7s72100-cpg-clocks # RZ/A1H
+ - const: renesas,rz-cpg-clocks # RZ/A1
+ - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
+
+ reg:
+ maxItems: 1
+
+ clocks: true
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names: true
+
+ renesas,mode:
+ description: Board-specific settings of the MD_CK* bits on R-Mobile A1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+
+ '#power-domain-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a73a4-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+
+ clock-output-names:
+ items:
+ - const: main
+ - const: pll0
+ - const: pll1
+ - const: pll2
+ - const: pll2s
+ - const: pll2h
+ - const: z
+ - const: z2
+ - const: i
+ - const: m3
+ - const: b
+ - const: m1
+ - const: m2
+ - const: zx
+ - const: zs
+ - const: hp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7740-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+ - description: extalr
+
+ clock-output-names:
+ items:
+ - const: system
+ - const: pllc0
+ - const: pllc1
+ - const: pllc2
+ - const: r
+ - const: usb24s
+ - const: i
+ - const: zg
+ - const: b
+ - const: m1
+ - const: hp
+ - const: hpp
+ - const: usbp
+ - const: s
+ - const: zb
+ - const: m3
+ - const: cp
+
+ required:
+ - renesas,mode
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7778-cpg-clocks
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ items:
+ - const: plla
+ - const: pllb
+ - const: b
+ - const: out
+ - const: p
+ - const: s
+ - const: s1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7779-cpg-clocks
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ items:
+ - const: plla
+ - const: z
+ - const: zs
+ - const: s
+ - const: s1
+ - const: p
+ - const: b
+ - const: out
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r7s72100-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: usb_x1
+
+ clock-output-names:
+ items:
+ - const: pll
+ - const: i
+ - const: g
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,sh73a0-cpg-clocks
+ then:
+ properties:
+ clocks:
+ items:
+ - description: extal1
+ - description: extal2
+
+ clock-output-names:
+ items:
+ - const: main
+ - const: pll0
+ - const: pll1
+ - const: pll2
+ - const: pll3
+ - const: dsi0phy
+ - const: dsi1phy
+ - const: zg
+ - const: m3
+ - const: b
+ - const: m1
+ - const: m2
+ - const: z
+ - const: zx
+ - const: hp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r8a7778-cpg-clocks
+ - renesas,r8a7779-cpg-clocks
+ - renesas,rz-cpg-clocks
+ then:
+ required:
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7740-cpg-clocks";
+ reg = <0xe6150000 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
+ "usb24s", "i", "zg", "b", "m1", "hp", "hpp",
+ "usbp", "s", "zb", "m3", "cp";
+ renesas,mode = <0x05>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
new file mode 100644
index 000000000..c55a7c494
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas CPG DIV6 Clock
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+ Generator (CPG). Their clock input is divided by a configurable factor from 1
+ to 64.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a73a4-div6-clock # R-Mobile APE6
+ - renesas,r8a7740-div6-clock # R-Mobile A1
+ - renesas,sh73a0-div6-clock # SH-Mobile AG5
+ - const: renesas,cpg-div6-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ oneOf:
+ - maxItems: 1
+ - maxItems: 4
+ - maxItems: 8
+ description:
+ For clocks with multiple parents, invalid settings must be specified as
+ "<0>".
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a73a4-clock.h>
+ sdhi2_clk: sdhi2_clk@e615007c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe615007c 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>,
+ <&extal2_clk>;
+ #clock-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
new file mode 100644
index 000000000..9b414fbde
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+ and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+ and share the same register block.
+
+ They provide the following functionalities:
+ - The CPG block generates various core clocks,
+ - The MSSR block provides two functions:
+ 1. Module Standby, providing a Clock Domain to control the clock supply
+ to individual SoC devices,
+ 2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+ compatible:
+ enum:
+ - renesas,r7s9210-cpg-mssr # RZ/A2
+ - renesas,r8a7742-cpg-mssr # RZ/G1H
+ - renesas,r8a7743-cpg-mssr # RZ/G1M
+ - renesas,r8a7744-cpg-mssr # RZ/G1N
+ - renesas,r8a7745-cpg-mssr # RZ/G1E
+ - renesas,r8a77470-cpg-mssr # RZ/G1C
+ - renesas,r8a774a1-cpg-mssr # RZ/G2M
+ - renesas,r8a774b1-cpg-mssr # RZ/G2N
+ - renesas,r8a774c0-cpg-mssr # RZ/G2E
+ - renesas,r8a774e1-cpg-mssr # RZ/G2H
+ - renesas,r8a7790-cpg-mssr # R-Car H2
+ - renesas,r8a7791-cpg-mssr # R-Car M2-W
+ - renesas,r8a7792-cpg-mssr # R-Car V2H
+ - renesas,r8a7793-cpg-mssr # R-Car M2-N
+ - renesas,r8a7794-cpg-mssr # R-Car E2
+ - renesas,r8a7795-cpg-mssr # R-Car H3
+ - renesas,r8a7796-cpg-mssr # R-Car M3-W
+ - renesas,r8a77961-cpg-mssr # R-Car M3-W+
+ - renesas,r8a77965-cpg-mssr # R-Car M3-N
+ - renesas,r8a77970-cpg-mssr # R-Car V3M
+ - renesas,r8a77980-cpg-mssr # R-Car V3H
+ - renesas,r8a77990-cpg-mssr # R-Car E3
+ - renesas,r8a77995-cpg-mssr # R-Car D3
+ - renesas,r8a779a0-cpg-mssr # R-Car V3U
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - extal # All
+ - extalr # Most R-Car Gen3 and RZ/G2
+ - usb_extal # Most R-Car Gen2 and RZ/G1
+
+ '#clock-cells':
+ description: |
+ - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+ and a core clock reference, as defined in
+ <dt-bindings/clock/*-cpg-mssr.h>
+ - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+ a module number, as defined in the datasheet.
+ const: 2
+
+ '#power-domain-cells':
+ description:
+ SoC devices that are part of the CPG/MSSR Clock Domain and can be
+ power-managed through Module Standby should refer to the CPG device node
+ in their "power-domains" property, as documented by the generic PM Domain
+ bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+ const: 0
+
+ '#reset-cells':
+ description:
+ The single reset specifier cell must be the module number, as defined in
+ the datasheet.
+ const: 1
+
+if:
+ not:
+ properties:
+ compatible:
+ items:
+ enum:
+ - renesas,r7s9210-cpg-mssr
+then:
+ required:
+ - '#reset-cells'
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7795-cpg-mssr";
+ reg = <0xe6150000 0x1000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml
new file mode 100644
index 000000000..9752ac632
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are
+ organized in groups of up to 32 gates.
+
+ This device tree binding describes a single 32 gate clocks group per node.
+ Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle
+ and the clock index in the group, from 0 to 31.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r7s72100-mstp-clocks # RZ/A1
+ - renesas,r8a73a4-mstp-clocks # R-Mobile APE6
+ - renesas,r8a7740-mstp-clocks # R-Mobile A1
+ - renesas,r8a7778-mstp-clocks # R-Car M1
+ - renesas,r8a7779-mstp-clocks # R-Car H1
+ - renesas,sh73a0-mstp-clocks # SH-Mobile AG5
+ - const: renesas,cpg-mstp-clocks
+
+ reg:
+ minItems: 1
+ items:
+ - description: Module Stop Control Register (MSTPCR)
+ - description: Module Stop Status Register (MSTPSR)
+
+ clocks:
+ minItems: 1
+ maxItems: 32
+
+ '#clock-cells':
+ const: 1
+
+ clock-indices:
+ minItems: 1
+ maxItems: 32
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 32
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-indices
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a73a4-clock.h>
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a73a4-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0xe6150138 4>, <0xe6150040 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+ R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+ R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+ R8A73A4_CLK_DMAC
+ >;
+ clock-output-names =
+ "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3",
+ "dmac";
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
new file mode 100644
index 000000000..268ca6154
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
@@ -0,0 +1,98 @@
+Device tree Clock bindings for Renesas EMMA Mobile EV2
+
+This binding uses the common clock binding.
+
+* SMU
+System Management Unit described in user's manual R19UH0037EJ1000_SMU.
+This is not a clock provider, but clocks under SMU depend on it.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu"
+- reg: Address and Size of SMU registers
+
+* SMU_CLKDIV
+Function block with an input mux and a divider, which corresponds to
+"Serial clock generator" in fig."Clock System Overview" of the manual,
+and "xxx frequency division setting register" (XXXCLKDIV) registers.
+This makes internal (neither input nor output) clock that is provided
+to input of xxxGCLK block.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-clkdiv"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+* SMU_GCLK
+Clock gating node shown as "Clock stop processing block" in the
+fig."Clock System Overview" of the manual.
+Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-gclk"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Input clock as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+Example of provider:
+
+usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
+ #clock-cells = <0>;
+};
+
+usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+};
+
+Example of consumer:
+
+serial@e1020000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <0 8 0>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
+};
+
+Example of clock-tree description:
+
+ This describes a clock path in the clock tree
+ c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+
+smu@e0110000 {
+ compatible = "renesas,emev2-smu";
+ reg = <0xe0110000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ c32ki: c32ki {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ pll3_fo: pll3_fo {
+ compatible = "fixed-factor-clock";
+ clocks = <&c32ki>;
+ clock-div = <1>;
+ clock-mult = <7000>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
new file mode 100644
index 000000000..399e0da22
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
@@ -0,0 +1,24 @@
+* Renesas H8/300 divider clock
+
+Required Properties:
+
+ - compatible: Must be "renesas,h8300-div-clock"
+
+ - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+ - #clock-cells: Must be 1
+
+ - reg: Base address and length of the divide rate selector
+
+ - renesas,width: bit width of selector
+
+Example
+-------
+
+ cclk: cclk {
+ compatible = "renesas,h8300-div-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee01b 2>;
+ renesas,width = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
new file mode 100644
index 000000000..500cdadbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
@@ -0,0 +1,23 @@
+Renesas H8S2678 PLL clock
+
+This device is Clock multiplyer
+
+Required Properties:
+
+ - compatible: Must be "renesas,h8s2678-pll-clock"
+
+ - clocks: Reference to the parent clocks
+
+ - #clock-cells: Must be 0
+
+ - reg: Two rate selector (Multiply / Divide) register address
+
+Example
+-------
+
+ pllclk: pllclk {
+ compatible = "renesas,h8s2678-pll-clock";
+ clocks = <&xclk>;
+ #clock-cells = <0>;
+ reg = <0xfee03b 2>, <0xfee045 2>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
new file mode 100644
index 000000000..aed713cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
@@ -0,0 +1,46 @@
+* Renesas R9A06G032 SYSCTRL
+
+Required Properties:
+
+ - compatible: Must be:
+ - "renesas,r9a06g032-sysctrl"
+ - reg: Base address and length of the SYSCTRL IO block.
+ - #clock-cells: Must be 1
+ - clocks: References to the parent clocks:
+ - external 40mhz crystal.
+ - external (optional) 32.768khz
+ - external (optional) jtag input
+ - external (optional) RGMII_REFCLK
+ - clock-names: Must be:
+ clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+ - #power-domain-cells: Must be 0
+
+Examples
+--------
+
+ - SYSCTRL node:
+
+ sysctrl: system-controller@4000c000 {
+ compatible = "renesas,r9a06g032-sysctrl";
+ reg = <0x4000c000 0x1000>;
+ #clock-cells = <1>;
+
+ clocks = <&ext_mclk>, <&ext_rtc_clk>,
+ <&ext_jtag_clk>, <&ext_rgmii_ref>;
+ clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+ #power-domain-cells = <0>;
+ };
+
+ - Other nodes can use the clocks provided by SYSCTRL as in:
+
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+ uart0: serial@40060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40060000 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ power-domains = <&sysctrl>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
new file mode 100644
index 000000000..da92f5748
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
@@ -0,0 +1,68 @@
+* Renesas R-Car USB 2.0 clock selector
+
+This file provides information on what the device node for the R-Car USB 2.0
+clock selector.
+
+If you connect an external clock to the USB_EXTAL pin only, you should set
+the clock rate to "usb_extal" node only.
+If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+is not needed because this is default setting. (Of course, you can set the
+clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+Case 1: An external clock connects to R-Car SoC
+ +----------+ +--- R-Car ---------------------+
+ |External |---|USB_EXTAL ---> all usb channels|
+ |clock | |USB_XTAL |
+ +----------+ +-------------------------------+
+In this case, we need this driver with "usb_extal" clock.
+
+Case 2: An oscillator connects to R-Car SoC
+ +----------+ +--- R-Car ---------------------+
+ |Oscillator|---|USB_EXTAL -+-> all usb channels|
+ | |---|USB_XTAL --+ |
+ +----------+ +-------------------------------+
+In this case, we don't need this selector.
+
+Required properties:
+- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
+ an R8A7795 SoC.
+ "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
+ an R8A77960 SoC.
+ "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of
+ an R8A77961 SoC.
+ "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
+ compatible device.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
+- reg: offset and length of the USB 2.0 clock selector register block.
+- clocks: A list of phandles and specifier pairs.
+- clock-names: Name of the clocks.
+ - The functional clock of USB 2.0 host side must be "ehci_ohci"
+ - The functional clock of HS-USB side must be "hs-usb-if"
+ - The USB_EXTAL clock pin must be "usb_extal"
+ - The USB_XTAL clock pin must be "usb_xtal"
+- #clock-cells: Must be 0
+- power-domains: A phandle and symbolic PM domain specifier.
+ See power/renesas,rcar-sysc.yaml.
+- resets: A list of phandles and specifier pairs.
+- reset-names: Name of the resets.
+ - The reset of USB 2.0 host side must be "ehci_ohci"
+ - The reset of HS-USB side must be "hs-usb-if"
+
+Example (R-Car H3):
+
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal>, <&usb_xtal>;
+ clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
new file mode 100644
index 000000000..55e78cdde
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
@@ -0,0 +1,70 @@
+* Rockchip PX30 Clock and Reset Unit
+
+The PX30 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
+- compatible: CRU should be "rockchip,px30-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed
+ in clock-names
+- clock-names: Should contain the following:
+ - "xin24m" for both PMUCRU and CRU
+ - "gpll" for CRU (sourced from PMUCRU)
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "i2sx_clkin" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+ pmucru: clock-controller@ff2bc000 {
+ compatible = "rockchip,px30-pmucru";
+ reg = <0x0 0xff2bc000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@ff2b0000 {
+ compatible = "rockchip,px30-cru";
+ reg = <0x0 0xff2b0000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@ff030000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff030000 0x0 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
new file mode 100644
index 000000000..20df350b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
@@ -0,0 +1,56 @@
+* Rockchip RK3036 Clock and Reset Unit
+
+The RK3036 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3036-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "rmii_clkin" - external EMAC clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@20060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
new file mode 100644
index 000000000..6f8744fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3126/RK3128 Clock and Reset Unit
+
+The RK3126/RK3128 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
+ "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
+ "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3128-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart2: serial@20068000 {
+ compatible = "rockchip,serial";
+ reg = <0x20068000 0x100>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "sclk_uart", "pclk_uart";
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 000000000..7f368530a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+ "rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
new file mode 100644
index 000000000..f32304812
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3228 Clock and Reset Unit
+
+The RK3228 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3228-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3228-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10110000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10110000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 000000000..bf3a9ec19
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,67 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+A revision of this SoC is available: rk3288w. The clock tree is a bit
+different so another dt-compatible is available. Noticed that it is only
+setting the difference but there is no automatic revision detection. This
+should be performed by bootloaders.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
+ case of this revision of Rockchip rk3288.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
new file mode 100644
index 000000000..9b151c5b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
@@ -0,0 +1,60 @@
+* Rockchip RK3308 Clock and Reset Unit
+
+The RK3308 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: CRU should be "rockchip,rk3308-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
+ "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
+ "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
+ - "mac_clkin" - external MAC clock - optional
+
+Example: Clock controller node:
+
+ cru: clock-controller@ff500000 {
+ compatible = "rockchip,rk3308-cru";
+ reg = <0x0 0xff500000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@ff0a0000 {
+ compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff0a0000 0x0 0x100>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
new file mode 100644
index 000000000..904ae682e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3328 Clock and Reset Unit
+
+The RK3328 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3328-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+ - "hdmi_phy" - output clock of the hdmi phy pll - optional
+
+Example: Clock controller node:
+
+ cru: clock-controller@ff440000 {
+ compatible = "rockchip,rk3328-cru";
+ reg = <0x0 0xff440000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@ff120000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff120000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
new file mode 100644
index 000000000..7c8bbcfed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3368 Clock and Reset Unit
+
+The RK3368 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3368-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+ - "ext_vip" - external VIP clock - optional,
+ - "usbotg_out" - output clock of the pll in the otg phy
+
+Example: Clock controller node:
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3368-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
new file mode 100644
index 000000000..3bc56fae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
@@ -0,0 +1,68 @@
+* Rockchip RK3399 Clock and Reset Unit
+
+The RK3399 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: PMU for CRU should be "rockchip,rk3399-pmucru"
+- compatible: CRU should be "rockchip,rk3399-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files".
+ It is used for GRF muxes, if missing any muxes present in the GRF will not
+ be available.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "clkin_gmac" - external GMAC clock - optional,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "pclkin_cif" - external ISP clock - optional,
+ - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
+ - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
+
+Example: Clock controller node:
+
+ pmucru: pmu-clock-controller@ff750000 {
+ compatible = "rockchip,rk3399-pmucru";
+ reg = <0x0 0xff750000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3399-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@ff1a0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff180000 0x0 0x100>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
new file mode 100644
index 000000000..161326a4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
@@ -0,0 +1,59 @@
+* Rockchip RV1108 Clock and Reset Unit
+
+The RV1108 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rv1108-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_vip" - external VIP clock - optional
+ - "ext_i2s" - external I2S clock - optional
+ - "ext_gmac" - external GMAC clock - optional
+ - "hdmiphy" - external clock input derived from HDMI PHY - optional
+ - "usbphy" - external clock input derived from USB PHY - optional
+
+Example: Clock controller node:
+
+ cru: cru@20200000 {
+ compatible = "rockchip,rv1108-cru";
+ reg = <0x20200000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10230000 {
+ compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+ reg = <0x10230000 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
new file mode 100644
index 000000000..2726c1d58
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
@@ -0,0 +1,49 @@
+Binding for Samsung S2M and S5M family clock generator block
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+To register these as clocks with common clock framework instantiate under
+main device node a sub-node named "clocks".
+
+It uses the common clock binding documented in:
+ - Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Required properties of the "clocks" sub-node:
+ - #clock-cells: should be 1.
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
+ The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
+ clocks.
+
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+ Clock ID Devices
+ ----------------------------------------------------------
+ 32KhzAP 0 S2MPS11/13/14/15, S5M8767
+ 32KhzCP 1 S2MPS11/13/15, S5M8767
+ 32KhzBT 2 S2MPS11/13/14/15, S5M8767
+
+Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
+in device tree sources.
+
+
+Example:
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ s2m_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "xx", "yy", "zz";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
new file mode 100644
index 000000000..2632d3f13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
@@ -0,0 +1,49 @@
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+ - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+ - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2410.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2410-clock";
+ reg = <0x4c000000 0x20>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
new file mode 100644
index 000000000..21a8c23e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
@@ -0,0 +1,49 @@
+* Samsung S3C2412 Clock Controller
+
+The S3C2412 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2412
+and s3c2413 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be "samsung,s3c2412-clock"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2412.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2412-clock";
+ reg = <0x4c000000 0x20>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2412-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
new file mode 100644
index 000000000..985c0f574
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
@@ -0,0 +1,55 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+ - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+ - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2443.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_uart" - external uart clock - optional,
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2416-clock";
+ reg = <0x4c000000 0x40>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
new file mode 100644
index 000000000..872ee8e0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
@@ -0,0 +1,76 @@
+* Samsung S3C64xx Clock Controller
+
+The S3C64xx clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the S3C64xx family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
+ - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular S3C64xx SoC and this is specified where applicable.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "fin_pll" - PLL input clock (xtal/extclk) - required,
+ - "xusbxti" - USB xtal - required,
+ - "iiscdclk0" - I2S0 codec clock - optional,
+ - "iiscdclk1" - I2S1 codec clock - optional,
+ - "iiscdclk2" - I2S2 codec clock - optional,
+ - "pcmcdclk0" - PCM0 codec clock - optional,
+ - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+Example: Clock controller node:
+
+ clock: clock-controller@7e00f000 {
+ compatible = "samsung,s3c6410-clock";
+ reg = <0x7e00f000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+Example: Required external clocks:
+
+ fin_pll: clock-fin-pll {
+ compatible = "fixed-clock";
+ clock-output-names = "fin_pll";
+ clock-frequency = <12000000>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: clock-xusbxti {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ uart0: serial@7f005000 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <5>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clock SCLK_UART>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
new file mode 100644
index 000000000..a86c83bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
@@ -0,0 +1,77 @@
+* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
+
+Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
+controller, which generates and supplies clock to various controllers
+within the SoC.
+
+Required Properties:
+
+- compatible: should be one of following:
+ - "samsung,s5pv210-clock" : for clock controller of Samsung
+ S5PC110/S5PV210 SoCs,
+ - "samsung,s5p6442-clock" : for clock controller of Samsung
+ S5P6442 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
+the SoC,
+ - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
+pins of the SoC,
+
+A subset of above clocks available on given board shall be specified in
+board device tree, including the system base clock, as selected by XOM[0]
+pin of the SoC. Refer to generic fixed rate clock bindings
+documentation[1] for more information how to specify these clocks.
+
+[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
+
+Example: Clock controller node:
+
+ clock: clock-controller@7e00f000 {
+ compatible = "samsung,s5pv210-clock";
+ reg = <0x7e00f000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+Example: Required external clocks:
+
+ xxti: clock-xxti {
+ compatible = "fixed-clock";
+ clock-output-names = "xxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: clock-xusbxti {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ uart0: serial@e2900000 {
+ compatible = "samsung,s5pv210-uart";
+ reg = <0xe2900000 0x400>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-names = "uart", "clk_uart_baud0",
+ "clk_uart_baud1";
+ clocks = <&clocks UART0>, <&clocks UART0>,
+ <&clocks SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 000000000..c3be1b600
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+ - Sagar Kadam <sagar.kadam@sifive.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+ On the FU540 family of SoCs, most system-wide clock and reset integration
+ is via the PRCI IP block.
+ The clock consumer should specify the desired clock via the clock ID
+ macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+ These macros begin with PRCI_CLK_.
+
+ The hfclk and rtcclk nodes are required, and represent physical
+ crystals or resonators located on the PCB. These nodes should be present
+ underneath /, rather than /soc.
+
+properties:
+ compatible:
+ const: sifive,fu540-c000-prci
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: high frequency clock.
+ - description: RTL clock.
+
+ clock-names:
+ items:
+ - const: hfclk
+ - const: rtcclk
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu540-c000-prci";
+ reg = <0x10000000 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt
new file mode 100644
index 000000000..a4f28ec86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt
@@ -0,0 +1,24 @@
+Binding for Silicon Labs 514 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si514 datasheet
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+
+Required properties:
+ - compatible: Shall be "silabs,si514"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si514".
+
+Example:
+ si514: clock-generator@55 {
+ reg = <0x55>;
+ #clock-cells = <0>;
+ compatible = "silabs,si514";
+ };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
new file mode 100644
index 000000000..504cce3ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
@@ -0,0 +1,171 @@
+Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable
+i2c clock generator.
+
+Reference
+[1] Si5341 Data Sheet
+ https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
+[2] Si5341 Reference Manual
+ https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+[3] Si5345 Reference Manual
+ https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
+
+The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
+clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
+in turn can be directed to any of the 10 (or 4) outputs through a divider.
+The internal structure of the clock generators can be found in [2].
+The Si5345 is similar to the Si5341 with the addition of fractional input
+dividers and automatic input selection, as described in [3].
+The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
+
+The driver can be used in "as is" mode, reading the current settings from the
+chip at boot, in case you have a (pre-)programmed device. If the PLL is not
+configured when the driver probes, it assumes the driver must fully initialize
+it.
+
+The device type, speed grade and revision are determined runtime by probing.
+
+The driver currently only supports XTAL input mode, and does not support any
+fancy input configurations. They can still be programmed into the chip and
+the driver will leave them "as is".
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+ "silabs,si5340" - Si5340 A/B/C/D
+ "silabs,si5341" - Si5341 A/B/C/D
+ "silabs,si5342" - Si5342 A/B/C/D
+ "silabs,si5344" - Si5344 A/B/C/D
+ "silabs,si5345" - Si5345 A/B/C/D
+- reg: i2c device address, usually 0x74
+- #clock-cells: from common clock binding; shall be set to 2.
+ The first value is "0" for outputs, "1" for synthesizers.
+ The second value is the output or synthesizer index.
+- clocks: from common clock binding; list of parent clock handles,
+ corresponding to inputs. Use a fixed clock for the "xtal" input.
+ At least one must be present.
+- clock-names: One of: "xtal", "in0", "in1", "in2"
+- vdd-supply: Regulator node for VDD
+
+Optional properties:
+- vdda-supply: Regulator node for VDDA
+- vdds-supply: Regulator node for VDDS
+- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
+ feedback divider. Must be such that the PLL output is in the valid range. For
+ example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only
+ the fraction matters, using 3500 and 12 will deliver the exact same result.
+ If these are not specified, and the PLL is not yet programmed when the driver
+ probes, the PLL will be set to 14GHz.
+- silabs,reprogram: When present, the driver will always assume the device must
+ be initialized, and always performs the soft-reset routine. Since this will
+ temporarily stop all output clocks, don't do this if the chip is generating
+ the CPU clock for example.
+- interrupts: Interrupt for INTRb pin.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+
+== Child nodes: Outputs ==
+
+The child nodes list the output clocks.
+
+Each of the clock outputs can be overwritten individually by using a child node.
+If a child node for a clock output is not set, the configuration remains
+unchanged.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- vdd-supply: Regulator node for VDD for this output. The driver selects default
+ values for common-mode and amplitude based on the voltage.
+- silabs,format: Output format, one of:
+ 1 = differential (defaults to LVDS levels)
+ 2 = low-power (defaults to HCSL levels)
+ 4 = LVCMOS
+- silabs,common-mode: Manually override output common mode, see [2] for values
+- silabs,amplitude: Manually override output amplitude, see [2] for values
+- silabs,synth-master: boolean. If present, this output is allowed to change the
+ multisynth frequency dynamically.
+- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH
+ when disabled, otherwise it's driven LOW.
+
+==Example==
+
+/* 48MHz reference crystal */
+ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+};
+
+i2c-master-node {
+ /* Programmable clock (for logic) */
+ si5341: clock-generator@74 {
+ reg = <0x74>;
+ compatible = "silabs,si5341";
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+
+ silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
+ silabs,pll-m-den = <48>;
+ silabs,reprogram; /* Chips are not programmed, always reset */
+
+ out@0 {
+ reg = <0>;
+ silabs,format = <1>; /* LVDS 3v3 */
+ silabs,common-mode = <3>;
+ silabs,amplitude = <3>;
+ silabs,synth-master;
+ };
+
+ /*
+ * Output 6 configuration:
+ * LVDS 1v8
+ */
+ out@6 {
+ reg = <6>;
+ silabs,format = <1>; /* LVDS 1v8 */
+ silabs,common-mode = <13>;
+ silabs,amplitude = <3>;
+ };
+
+ /*
+ * Output 8 configuration:
+ * HCSL 3v3
+ */
+ out@8 {
+ reg = <8>;
+ silabs,format = <2>;
+ silabs,common-mode = <11>;
+ silabs,amplitude = <3>;
+ };
+ };
+};
+
+some-video-node {
+ /* Standard clock bindings */
+ clock-names = "pixel";
+ clocks = <&si5341 0 7>; /* Output 7 */
+
+ /* Set output 7 to use syntesizer 3 as its parent */
+ assigned-clocks = <&si5341 0 7>, <&si5341 1 3>;
+ assigned-clock-parents = <&si5341 1 3>;
+ /* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */
+ assigned-clock-rates = <148500000>, <594000000>;
+};
+
+some-audio-node {
+ clock-names = "i2s-clk";
+ clocks = <&si5341 0 0>;
+ /*
+ * since output 0 is a synth-master, the synth will be automatically set
+ * to an appropriate frequency when the audio driver requests another
+ * frequency. We give control over synth 2 to this output here.
+ */
+ assigned-clocks = <&si5341 0 0>;
+ assigned-clock-parents = <&si5341 1 2>;
+};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
new file mode 100644
index 000000000..8fe6f80af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -0,0 +1,126 @@
+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with up to 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+ "silabs,si5351a" - Si5351a, QFN20 package
+ "silabs,si5351a-msop" - Si5351a, MSOP10 package
+ "silabs,si5351b" - Si5351b, QFN20 package
+ "silabs,si5351c" - Si5351c, QFN20 package
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+ handles, shall be xtal reference clock or xtal and clkin for
+ si5351c only. Corresponding clock input names are "xtal" and
+ "clkin" respectively.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+ to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+ 0 = multisynth N
+ 1 = multisynth 0 for output clocks 0-3, else multisynth4
+ 2 = xtal
+ 3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+ divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+- silabs,pll-reset: boolean, clock output can reset its pll.
+- silabs,disable-state : clock output disable state, shall be
+ 0 = clock output is driven LOW when disabled
+ 1 = clock output is driven HIGH when disabled
+ 2 = clock output is FLOATING (HIGH-Z) when disabled
+ 3 = clock output is NEVER disabled
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+ /* Si5351a msop10 i2c clock generator */
+ si5351a: clock-generator@60 {
+ compatible = "silabs,si5351a-msop";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ /* connect xtal input to 25MHz reference */
+ clocks = <&ref25>;
+ clock-names = "xtal";
+
+ /* connect xtal input as source of pll0 and pll1 */
+ silabs,pll-source = <0 0>, <1 0>;
+
+ /*
+ * overwrite clkout0 configuration with:
+ * - 8mA output drive strength
+ * - pll0 as clock source of multisynth0
+ * - multisynth0 as clock source of output divider
+ * - multisynth0 can change pll0
+ * - set initial clock frequency of 74.25MHz
+ */
+ clkout0 {
+ reg = <0>;
+ silabs,drive-strength = <8>;
+ silabs,multisynth-source = <0>;
+ silabs,clock-source = <0>;
+ silabs,pll-master;
+ clock-frequency = <74250000>;
+ };
+
+ /*
+ * overwrite clkout1 configuration with:
+ * - 4mA output drive strength
+ * - pll1 as clock source of multisynth1
+ * - multisynth1 as clock source of output divider
+ * - multisynth1 can change pll1
+ */
+ clkout1 {
+ reg = <1>;
+ silabs,drive-strength = <4>;
+ silabs,multisynth-source = <1>;
+ silabs,clock-source = <0>;
+ pll-master;
+ };
+
+ /*
+ * overwrite clkout2 configuration with:
+ * - xtal as clock source of output divider
+ */
+ clkout2 {
+ reg = <2>;
+ silabs,clock-source = <2>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.txt b/Documentation/devicetree/bindings/clock/silabs,si544.txt
new file mode 100644
index 000000000..b86535b80
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si544.txt
@@ -0,0 +1,25 @@
+Binding for Silicon Labs 544 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si544 datasheet
+ https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf
+
+Required properties:
+ - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according
+ to the speed grade of the chip.
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si544".
+
+Example:
+ si544: clock-controller@55 {
+ reg = <0x55>;
+ #clock-cells = <0>;
+ compatible = "silabs,si544b";
+ };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
new file mode 100644
index 000000000..901935e92
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
@@ -0,0 +1,39 @@
+Binding for Silicon Labs 570, 571, 598 and 599 programmable
+I2C clock generators.
+
+Reference
+This binding uses the common clock binding[1]. Details about the devices can be
+found in the data sheets[2][3].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si570/571 Data Sheet
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+[3] Si598/599 Data Sheet
+ https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+
+Required properties:
+ - compatible: Shall be one of "silabs,si570", "silabs,si571",
+ "silabs,si598", "silabs,si599"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+ - factory-fout: Factory set default frequency. This frequency is part specific.
+ The correct frequency for the part used has to be provided in
+ order to generate the correct output frequencies. For more
+ details, please refer to the data sheet.
+ - temperature-stability: Temperature stability of the device in PPM. Should be
+ one of: 7, 20, 50 or 100.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si570".
+ - clock-frequency: Output frequency to generate. This defines the output
+ frequency set during boot. It can be reprogrammed during
+ runtime through the common clock framework.
+
+Example:
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
new file mode 100644
index 000000000..c56c7553c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the HSDK Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+ "snps,hsdk-core-pll-clock"
+ "snps,hsdk-gp-pll-clock"
+ "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+ input_clk: input-clk {
+ clock-frequency = <33333333>;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ cpu_clk: cpu-clk@0 {
+ compatible = "snps,hsdk-core-pll-clock";
+ reg = <0x00 0x10>;
+ #clock-cells = <0>;
+ clocks = <&input_clk>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
new file mode 100644
index 000000000..11fe48766
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the AXS10X Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-<name>-pll-clock"
+ "snps,axs10x-arc-pll-clock"
+ "snps,axs10x-pgu-pll-clock"
+- reg: should always contain 2 pairs address - length: first for PLL config
+registers and second for corresponding LOCK CGU register.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+ input-clk: input-clk {
+ clock-frequency = <33333333>;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ core-clk: core-clk@80 {
+ compatible = "snps,axs10x-arc-pll-clock";
+ reg = <0x80 0x10>, <0x100 0x10>;
+ #clock-cells = <0>;
+ clocks = <&input-clk>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
new file mode 100644
index 000000000..c3930edc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier clock controller
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+ compatible:
+ oneOf:
+ - description: System clock
+ enum:
+ - socionext,uniphier-ld4-clock
+ - socionext,uniphier-pro4-clock
+ - socionext,uniphier-sld8-clock
+ - socionext,uniphier-pro5-clock
+ - socionext,uniphier-pxs2-clock
+ - socionext,uniphier-ld6b-clock
+ - socionext,uniphier-ld11-clock
+ - socionext,uniphier-ld20-clock
+ - socionext,uniphier-pxs3-clock
+ - description: Media I/O (MIO) clock, SD clock
+ enum:
+ - socionext,uniphier-ld4-mio-clock
+ - socionext,uniphier-pro4-mio-clock
+ - socionext,uniphier-sld8-mio-clock
+ - socionext,uniphier-pro5-sd-clock
+ - socionext,uniphier-pxs2-sd-clock
+ - socionext,uniphier-ld11-mio-clock
+ - socionext,uniphier-ld20-sd-clock
+ - socionext,uniphier-pxs3-sd-clock
+ - description: Peripheral clock
+ enum:
+ - socionext,uniphier-ld4-peri-clock
+ - socionext,uniphier-pro4-peri-clock
+ - socionext,uniphier-sld8-peri-clock
+ - socionext,uniphier-pro5-peri-clock
+ - socionext,uniphier-pxs2-peri-clock
+ - socionext,uniphier-ld11-peri-clock
+ - socionext,uniphier-ld20-peri-clock
+ - socionext,uniphier-pxs3-peri-clock
+
+ "#clock-cells":
+ const: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#clock-cells"
+
+examples:
+ - |
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
+ reg = <0x61840000 0x4000>;
+
+ clock {
+ compatible = "socionext,uniphier-ld11-clock";
+ #clock-cells = <1>;
+ };
+
+ // other nodes ...
+ };
+
+ - |
+ mioctrl@59810000 {
+ compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
+ reg = <0x59810000 0x800>;
+
+ clock {
+ compatible = "socionext,uniphier-ld11-mio-clock";
+ #clock-cells = <1>;
+ };
+
+ // other nodes ...
+ };
+
+ - |
+ perictrl@59820000 {
+ compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
+ reg = <0x59820000 0x200>;
+
+ clock {
+ compatible = "socionext,uniphier-ld11-peri-clock";
+ #clock-cells = <1>;
+ };
+
+ // other nodes ...
+ };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
new file mode 100644
index 000000000..aaaf02ca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
@@ -0,0 +1,63 @@
+Spreadtrum SC9860 Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+ - "sprd,sc9860-pmu-gate"
+ - "sprd,sc9860-pll"
+ - "sprd,sc9860-ap-clk"
+ - "sprd,sc9860-aon-prediv"
+ - "sprd,sc9860-apahb-gate"
+ - "sprd,sc9860-aon-gate"
+ - "sprd,sc9860-aonsecure-clk"
+ - "sprd,sc9860-agcp-gate"
+ - "sprd,sc9860-gpu-clk"
+ - "sprd,sc9860-vsp-clk"
+ - "sprd,sc9860-vsp-gate"
+ - "sprd,sc9860-cam-clk"
+ - "sprd,sc9860-cam-gate"
+ - "sprd,sc9860-disp-clk"
+ - "sprd,sc9860-disp-gate"
+ - "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+ property here just simply shows which clock group the clocks'
+ parents are in, since each clk node would represent many clocks
+ which are defined in the driver. The detailed dependency
+ relationship (i.e. how many parents and which are the parents)
+ are implemented in driver code.
+
+Optional properties:
+
+- reg: Contain the registers base address and length. It must be configured
+ only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+ the clock, and so we can get regmap for the clocks from the
+ syscon device.
+
+Example:
+
+ pmu_gate: pmu-gate {
+ compatible = "sprd,sc9860-pmu-gate";
+ sprd,syscon = <&pmu_regs>;
+ clocks = <&ext_26m>;
+ #clock-cells = <1>;
+ };
+
+ pll: pll {
+ compatible = "sprd,sc9860-pll";
+ sprd,syscon = <&ana_regs>;
+ clocks = <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ ap_clk: clock-controller@20000000 {
+ compatible = "sprd,sc9860-ap-clk";
+ reg = <0 0x20000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>,
+ <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
new file mode 100644
index 000000000..4069e09cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: SC9863A Clock Control Unit Device Tree Bindings
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - sprd,sc9863a-ap-clk
+ - sprd,sc9863a-aon-clk
+ - sprd,sc9863a-apahb-gate
+ - sprd,sc9863a-pmu-gate
+ - sprd,sc9863a-aonapb-gate
+ - sprd,sc9863a-pll
+ - sprd,sc9863a-mpll
+ - sprd,sc9863a-rpll
+ - sprd,sc9863a-dpll
+ - sprd,sc9863a-mm-gate
+ - sprd,sc9863a-mm-clk
+ - sprd,sc9863a-apapb-gate
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+ description: |
+ The input parent clock(s) phandle for this clock, only list fixed
+ clocks which are declared in devicetree.
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ - const: ext-26m
+ - const: ext-32k
+ - const: ext-4m
+ - const: rco-100m
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#clock-cells'
+
+if:
+ properties:
+ compatible:
+ enum:
+ - sprd,sc9863a-ap-clk
+ - sprd,sc9863a-aon-clk
+then:
+ required:
+ - reg
+
+else:
+ description: |
+ Other SC9863a clock nodes should be the child of a syscon node in
+ which compatible string shoule be:
+ "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
+
+ The 'reg' property for the clock node is also required if there is a sub
+ range of registers for the clocks.
+
+additionalProperties: false
+
+examples:
+ - |
+ ap_clk: clock-controller@21500000 {
+ compatible = "sprd,sc9863a-ap-clk";
+ reg = <0x21500000 0x1000>;
+ clocks = <&ext_26m>, <&ext_32k>;
+ clock-names = "ext-26m", "ext-32k";
+ #clock-cells = <1>;
+ };
+
+ - |
+ syscon@20e00000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+ reg = <0x20e00000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20e00000 0x4000>;
+
+ apahb_gate: apahb-gate@0 {
+ compatible = "sprd,sc9863a-apahb-gate";
+ reg = <0x0 0x1020>;
+ #clock-cells = <1>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt
new file mode 100644
index 000000000..40e0cf1f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt
@@ -0,0 +1,104 @@
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+ i.e. the driver output for the slow 32kHz chrystal, if the
+ board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+ i.e. the driver output for the main (~19.2 MHz) chrystal,
+ if the board has its own circuitry for providing this
+ oscillator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+ this table:
+
+ 0: HCLKDMA0
+ 1: HCLKSMC
+ 2: HCLKSDRAM
+ 3: HCLKDMA1
+ 4: HCLKCLCD
+ 5: PCLKIRDA
+ 6: PCLKSSP
+ 7: PCLKUART0
+ 8: PCLKSDI
+ 9: PCLKI2C0
+ 10: PCLKI2C1
+ 11: PCLKUART1
+ 12: PCLMSP0
+ 13: HCLKUSB
+ 14: HCLKDIF
+ 15: HCLKSAA
+ 16: HCLKSVA
+ 17: PCLKHSI
+ 18: PCLKXTI
+ 19: PCLKUART2
+ 20: PCLKMSP1
+ 21: PCLKMSP2
+ 22: PCLKOWM
+ 23: HCLKHPI
+ 24: PCLKSKE
+ 25: PCLKHSEM
+ 26: HCLK3D
+ 27: HCLKHASH
+ 28: HCLKCRYP
+ 29: PCLKMSHC
+ 30: HCLKUSBM
+ 31: HCLKRNG
+ (32, 33, 34, 35 RESERVED)
+ 36: CLDCLK
+ 37: IRDACLK
+ 38: SSPICLK
+ 39: UART0CLK
+ 40: SDICLK
+ 41: I2C0CLK
+ 42: I2C1CLK
+ 43: UART1CLK
+ 44: MSPCLK0
+ 45: USBCLK
+ 46: DIFCLK
+ 47: IPI2CCLK
+ 48: IPBMCCLK
+ 49: HSICLKRX
+ 50: HSICLKTX
+ 51: UART2CLK
+ 52: MSPCLK1
+ 53: MSPCLK2
+ 54: OWMCLK
+ (55 RESERVED)
+ 56: SKECLK
+ (57 RESERVED)
+ 58: 3DCLK
+ 59: PCLKMSP3
+ 60: MSPCLK3
+ 61: MSHCCLK
+ 62: USBMCLK
+ 63: RNGCCLK
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
new file mode 100644
index 000000000..cfa04b614
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -0,0 +1,138 @@
+STMicroelectronics STM32 Reset and Clock Controller
+===================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+ "st,stm32f42xx-rcc"
+ "st,stm32f469-rcc"
+ "st,stm32f746-rcc"
+ "st,stm32f769-rcc"
+
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+- #clock-cells: 2, device nodes should specify the clock in their "clocks"
+ property, containing a phandle to the clock device node, an index selecting
+ between gated clocks and other clocks and an index specifying the clock to
+ use.
+- clocks: External oscillator clock phandle
+ - high speed external clock signal (HSE)
+ - external I2S clock (I2S_CKIN)
+
+Example:
+
+ rcc: rcc@40023800 {
+ #reset-cells = <1>;
+ #clock-cells = <2>
+ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ clocks = <&clk_hse>, <&clk_i2s_ckin>;
+ };
+
+Specifying gated clocks
+=======================
+
+The primary index must be set to 0.
+
+The secondary index is the bit number within the RCC register bank, starting
+from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
+
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
+
+To simplify the usage and to share bit definition with the reset and clock
+drivers of the RCC IP, macros are available to generate the index in
+human-readble format.
+
+For STM32F4 series, the macro are available here:
+ - include/dt-bindings/mfd/stm32f4-rcc.h
+
+Example:
+
+ /* Gated clock, AHB1 bit 0 (GPIOA) */
+ ... {
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>
+ };
+
+ /* Gated clock, AHB2 bit 4 (CRYP) */
+ ... {
+ clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)>
+ };
+
+Specifying other clocks
+=======================
+
+The primary index must be set to 1.
+
+The secondary index is bound with the following magic numbers:
+
+ 0 SYSTICK
+ 1 FCLK
+ 2 CLK_LSI (low-power clock source)
+ 3 CLK_LSE (generated from a 32.768 kHz low-speed external
+ crystal or ceramic resonator)
+ 4 CLK_HSE_RTC (HSE division factor for RTC clock)
+ 5 CLK_RTC (real-time clock)
+ 6 PLL_VCO_I2S (vco frequency of I2S pll)
+ 7 PLL_VCO_SAI (vco frequency of SAI pll)
+ 8 CLK_LCD (LCD-TFT)
+ 9 CLK_I2S (I2S clocks)
+ 10 CLK_SAI1 (audio clocks)
+ 11 CLK_SAI2
+ 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor)
+ 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor)
+
+ 14 CLK_HSI (Internal ocscillator clock)
+ 15 CLK_SYSCLK (System Clock)
+ 16 CLK_HDMI_CEC (HDMI-CEC clock)
+ 17 CLK_SPDIF (SPDIF-Rx clock)
+ 18 CLK_USART1 (U(s)arts clocks)
+ 19 CLK_USART2
+ 20 CLK_USART3
+ 21 CLK_UART4
+ 22 CLK_UART5
+ 23 CLK_USART6
+ 24 CLK_UART7
+ 25 CLK_UART8
+ 26 CLK_I2C1 (I2S clocks)
+ 27 CLK_I2C2
+ 28 CLK_I2C3
+ 29 CLK_I2C4
+ 30 CLK_LPTIMER (LPTimer1 clock)
+ 31 CLK_PLL_SRC
+ 32 CLK_DFSDM1
+ 33 CLK_ADFSDM1
+ 34 CLK_F769_DSI
+)
+
+Example:
+
+ /* Misc clock, FCLK */
+ ... {
+ clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)>
+ };
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+ crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+ timer2 {
+ resets = <&rcc STM32F4_APB1_RESET(TIM2)>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
new file mode 100644
index 000000000..cac24ee10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
@@ -0,0 +1,71 @@
+STMicroelectronics STM32H7 Reset and Clock Controller
+=====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+ "st,stm32h743-rcc"
+
+- reg: should be register base and length as documented in the
+ datasheet
+
+- #reset-cells: 1, see below
+
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks: External oscillator clock phandle
+ - high speed external clock signal (HSE)
+ - low speed external clock signal (LSE)
+ - external I2S clock (I2S_CKIN)
+
+Optional properties:
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+ write protection (RTC clock).
+
+Example:
+
+ rcc: reset-clock-controller@58024400 {
+ compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+ reg = <0x58024400 0x400>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
+
+ st,syscfg = <&pwrcfg>;
+};
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+Example:
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&rcc TIM5_CK>;
+ };
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+
+For example, for CRC reset:
+ crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
+
+Example:
+
+ timer2 {
+ resets = <&rcc STM32H7_APB1L_RESET(TIM2)>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
new file mode 100644
index 000000000..4e385508f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reset Clock Controller Binding
+
+maintainers:
+ - Gabriel Fernandez <gabriel.fernandez@st.com>
+
+description: |
+ The RCC IP is both a reset and a clock controller.
+ RCC makes also power management (resume/supend and wakeup interrupt).
+ Please also refer to reset.txt for common reset controller binding usage.
+
+ This binding uses common clock bindings
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ Specifying clocks
+ =================
+
+ All available clocks are defined as preprocessor macros in
+ dt-bindings/clock/stm32mp1-clks.h header and can be used in device
+ tree sources.
+
+ Specifying softreset control of devices
+ =======================================
+
+ Device nodes should specify the reset channel required in their "resets"
+ property, containing a phandle to the reset device node and an index specifying
+ which channel to use.
+ The index is the bit number within the RCC registers bank, starting from RCC
+ base address.
+ It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+ Where bit_offset is the bit offset within the register.
+
+ For example on STM32MP1, for LTDC reset:
+ ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
+ = 0x180 / 4 * 32 + 0 = 3072
+
+ The list of valid indices for STM32MP1 is available in:
+ include/dt-bindings/reset-controller/stm32mp1-resets.h
+
+ This file implements defines like:
+ #define LTDC_R 3072
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ compatible:
+ items:
+ - const: st,stm32mp1-rcc
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - "#reset-cells"
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ rcc: rcc@50000000 {
+ compatible = "st,stm32mp1-rcc", "syscon";
+ reg = <0x50000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
new file mode 100644
index 000000000..9a46cb1d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,32 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+ "st,stih407-clkgen-a9-mux"
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
new file mode 100644
index 000000000..f207053e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -0,0 +1,37 @@
+Binding for a ST pll clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+ "st,clkgen-pll0"
+ "st,clkgen-pll1"
+ "st,stih407-clkgen-plla9"
+ "st,stih418-clkgen-plla9"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-clkgen-plla9";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
new file mode 100644
index 000000000..45ac19bfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -0,0 +1,68 @@
+Binding for a Clockgen hardware block found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+A Clockgen node can contain pll, diviser or multiplexer nodes.
+
+We will find only the base address of the Clockgen, this base
+address is common of all subnode.
+
+ clockgen_node {
+ reg = <>;
+
+ pll_node {
+ ...
+ };
+
+ quadfs_node {
+ ...
+ };
+
+ mux_node {
+ ...
+ };
+
+ flexgen_node {
+ ...
+ };
+ ...
+ };
+
+This binding uses the common clock binding[1].
+Each subnode should use the binding described in [2]..[7]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+
+
+Required properties:
+- reg : A Base address and length of the register set.
+
+Example:
+
+ clockgen-a@90ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgen-pll0";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
new file mode 100644
index 000000000..7ff77fc57
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,123 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+ Clockgen block diagram
+ -------------------------------------------------------------------
+ | Flexgen structure |
+ | --------------------------------------------- |
+ | | ------- -------- -------- | |
+clk_sysin | | | | | | | | |
+---|-----------------|-->| | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | | |Pre | |Final | | |
+ | | |PLL0 | | | | |Dividers| |Dividers| | |
+ | |->| | | | | | x32 | | x32 | | |
+ | | | odf_0|----|-->| | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | Clock | | | | | | |
+ | | |PLL1 | | | | | | | | | |
+ | |->| | | | Cross | | | | | | |
+ | | | odf_0|----|-->| | | | | | CLK_DIV[31:0]
+ | | | | | | Bar |====>| |====>| |===|=========>
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | |QUADFS | | | | | | | | | |
+ | |->| ch0|----|-->| | | | | | | |
+ | | | | | | | | | | | |
+ | | ch1|----|-->| | | | | | | |
+ | | | | | | | | | | | |
+ | | ch2|----|-->| | | DIV | | DIV | | |
+ | | | | | | | 1 to | | 1 to | | |
+ | | ch3|----|-->| | | 1024 | | 64 | | |
+ | ------- | | | | | | | | |
+ | | ------- -------- -------- | |
+ | -------------------------------------------- |
+ | |
+ -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+ "st,flexgen"
+ "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+ audio use case)
+ "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+ and activate synchronous mode)
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+ outputs).
+
+- clocks : must be set to the parent's phandle. it's could be output clocks of
+ a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp";
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
new file mode 100644
index 000000000..d93d49342
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,45 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+ "st,quadfs"
+ "st,quadfs-pll"
+
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+ clock outputs but not all of them in a specific instance
+ have to be used in the SoC. If a clock name is left as
+ an empty string then no clock will be created for the
+ output associated with that string index. If fewer than
+ 4 strings are provided then no clocks will be created
+ for the remaining outputs.
+
+Example:
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
new file mode 100644
index 000000000..7cafcb98e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
@@ -0,0 +1,80 @@
+Clock bindings for ST-Ericsson U300 System Controller Clocks
+
+Bindings for the gated system controller clocks:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-clk"
+- #clock-cells: must be <0>
+- clock-type: specifies the type of clock:
+ 0 = slow clock
+ 1 = fast clock
+ 2 = rest/remaining clock
+- clock-id: specifies the clock in the type range
+
+Optional properties:
+- clocks: parent clock(s)
+
+The available clocks per type are as follows:
+
+Type: ID: Clock:
+-------------------
+0 0 Slow peripheral bridge clock
+0 1 UART0 clock
+0 4 GPIO clock
+0 6 RTC clock
+0 7 Application timer clock
+0 8 Access timer clock
+
+1 0 Fast peripheral bridge clock
+1 1 I2C bus 0 clock
+1 2 I2C bus 1 clock
+1 5 MMC interface peripheral (silicon) clock
+1 6 SPI clock
+
+2 3 CPU clock
+2 4 DMA controller clock
+2 5 External Memory Interface (EMIF) clock
+2 6 NAND flask interface clock
+2 8 XGAM graphics engine clock
+2 9 Shared External Memory Interface (SEMI) clock
+2 10 AHB Subsystem Bridge clock
+2 12 Interrupt controller clock
+
+Example:
+
+gpio_clk: gpio_clk@13M {
+ #clock-cells = <0>;
+ compatible = "stericsson,u300-syscon-clk";
+ clock-type = <0>; /* Slow */
+ clock-id = <4>;
+ clocks = <&slow_clk>;
+};
+
+gpio: gpio@c0016000 {
+ compatible = "stericsson,gpio-coh901";
+ (...)
+ clocks = <&gpio_clk>;
+};
+
+
+Bindings for the MMC/SD card clock:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-mclk"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+mmc_mclk: mmc_mclk {
+ #clock-cells = <0>;
+ compatible = "stericsson,u300-syscon-mclk";
+ clocks = <&mmc_pclk>;
+};
+
+mmcsd: mmcsd@c0001000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ clocks = <&mmc_pclk>, <&mmc_mclk>;
+ clock-names = "apb_pclk", "mclk";
+ (...)
+};
diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt
new file mode 100644
index 000000000..dbaa886b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt
@@ -0,0 +1,20 @@
+Clock bindings for ST-Ericsson ABx500 clocks
+
+Required properties :
+- compatible : shall contain the following:
+ "stericsson,ab8500-clk"
+- #clock-cells should be <1>
+
+The ABx500 clocks need to be placed as a subnode of an AB8500
+device node, see mfd/ab8500.txt
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/ste-ab8500.h header and can be used in device
+tree sources.
+
+Example:
+
+clock-controller {
+ compatible = "stericsson,ab8500-clk";
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/tango4-clock.txt b/Documentation/devicetree/bindings/clock/tango4-clock.txt
new file mode 100644
index 000000000..19c580a7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tango4-clock.txt
@@ -0,0 +1,23 @@
+* Sigma Designs Tango4 Clock Generator
+
+The Tango4 clock generator outputs cpu_clk and sys_clk (the latter is used
+for RAM and various peripheral devices). The clock binding described here
+is applicable to all Tango4 SoCs.
+
+Required Properties:
+
+- compatible: should be "sigma,tango4-clkgen".
+- reg: physical base address of the device and length of memory mapped region.
+- clocks: phandle of the input clock (crystal oscillator).
+- clock-output-names: should be "cpuclk" and "sysclk".
+- #clock-cells: should be set to 1.
+
+Example:
+
+ clkgen: clkgen@10000 {
+ compatible = "sigma,tango4-clkgen";
+ reg = <0x10000 0x40>;
+ clocks = <&xtal>;
+ clock-output-names = "cpuclk", "sysclk";
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
new file mode 100644
index 000000000..6b419a987
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI EHRPWM Time Base Clock
+
+maintainers:
+ - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+ compatible:
+ items:
+ - const: ti,am654-ehrpwm-tbclk
+ - const: syscon
+
+ "#clock-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ ehrpwm_tbclk: syscon@4140 {
+ compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ reg = <0x4140 0x18>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
new file mode 100644
index 000000000..21c3ff764
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
@@ -0,0 +1,42 @@
+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+ handles, shall be reference clock(s) connected to CLK_IN0
+ and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+ in case of crystal oscillator or differential signal input
+ configuration. Use clk_in0 and clk_in1 in case of independent
+ single-ended LVCMOS inputs configuration.
+
+Example:
+
+ clocks {
+ clk54: clk54 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <54000000>;
+ };
+ };
+ ...
+ i2c0: i2c-master@d090000 {
+ ...
+ cdce706: clock-synth@69 {
+ compatible = "ti,cdce706";
+ #clock-cells = <1>;
+ reg = <0x69>;
+ clocks = <&clk54>;
+ clock-names = "clk_in0";
+ };
+ };
+ ...
+ simple-audio-card,codec {
+ ...
+ clocks = <&cdce706 4>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
new file mode 100644
index 000000000..df42ab727
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
@@ -0,0 +1,53 @@
+Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
+
+Reference
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] https://www.ti.com/product/cdce913
+[3] https://www.ti.com/product/cdce925
+[4] https://www.ti.com/product/cdce937
+[5] https://www.ti.com/product/cdce949
+
+The driver provides clock sources for each output Y1 through Y5.
+
+Required properties:
+ - compatible: Shall be one of the following:
+ - "ti,cdce913": 1-PLL, 3 Outputs
+ - "ti,cdce925": 2-PLL, 5 Outputs
+ - "ti,cdce937": 3-PLL, 7 Outputs
+ - "ti,cdce949": 4-PLL, 9 Outputs
+ - reg: I2C device address.
+ - clocks: Points to a fixed parent clock that provides the input frequency.
+ - #clock-cells: From common clock bindings: Shall be 1.
+
+Optional properties:
+ - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
+ board, or to compensate for external influences.
+- vdd-supply: A regulator node for Vdd
+- vddout-supply: A regulator node for Vddout
+
+For all PLL1, PLL2, ... an optional child node can be used to specify spread
+spectrum clocking parameters for a board.
+ - spread-spectrum: SSC mode as defined in the data sheet.
+ - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
+ present, the clock runs at the requested frequency on average. Otherwise
+ the requested frequency is the maximum value of the SCC range.
+
+
+Example:
+
+ clockgen: cdce925pw@64 {
+ compatible = "cdce925";
+ reg = <0x64>;
+ clocks = <&xtal_27Mhz>;
+ #clock-cells = <1>;
+ xtal-load-pf = <5>;
+ vdd-supply = <&1v8-reg>;
+ vddout-supply = <&3v3-reg>;
+ /* PLL options to get SSC 1% centered */
+ PLL2 {
+ spread-spectrum = <4>;
+ spread-spectrum-center;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
new file mode 100644
index 000000000..4e59dc6b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
@@ -0,0 +1,36 @@
+Texas Instruments TI-SCI Clocks
+===============================
+
+All clocks on Texas Instruments' SoCs that contain a System Controller,
+are only controlled by this entity. Communication between a host processor
+running an OS and the System Controller happens through a protocol known
+as TI-SCI[1]. This clock implementation plugs into the common clock
+framework and makes use of the TI-SCI protocol on clock API requests.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+Required properties:
+-------------------
+- compatible: Must be "ti,k2g-sci-clk"
+- #clock-cells: Shall be 2.
+ In clock consumers, this cell represents the device ID and clock ID
+ exposed by the PM firmware. The list of valid values for the device IDs
+ and clocks IDs for 66AK2G SoC are documented at
+ http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
+
+Examples:
+--------
+
+pmmc: pmmc {
+ compatible = "ti,k2g-sci";
+
+ k2g_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+};
+
+uart0: serial@2530c00 {
+ compatible = "ns16550a";
+ clocks = <&k2g_clks 0x2c 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
new file mode 100644
index 000000000..18af6b940
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
@@ -0,0 +1,61 @@
+Texas Instruments clkctrl clock binding
+
+Texas Instruments SoCs can have a clkctrl clock controller for each
+interconnect target module. The clkctrl clock controller manages functional
+and interface clocks for each module. Each clkctrl controller can also
+gate one or more optional functional clocks for a module, and can have one
+or more clock muxes. There is a clkctrl clock controller typically for each
+interconnect target module on omap4 and later variants.
+
+The clock consumers can specify the index of the clkctrl clock using
+the hardware offset from the clkctrl instance register space. The optional
+clocks can be specified by clkctrl hardware offset and the index of the
+optional clock.
+
+For more information, please see the Linux clock framework binding at
+Documentation/devicetree/bindings/clock/clock-bindings.txt.
+
+Required properties :
+- compatible : shall be "ti,clkctrl" or a clock domain specific name:
+ "ti,clkctrl-l4-cfg"
+ "ti,clkctrl-l4-per"
+ "ti,clkctrl-l4-secure"
+ "ti,clkctrl-l4-wkup"
+- #clock-cells : shall contain 2 with the first entry being the instance
+ offset from the clock domain base and the second being the
+ clock index
+- reg : clock registers
+
+Example: Clock controller node on omap 4430:
+
+&cm2 {
+ l4per: cm@1400 {
+ cm_l4per@0 {
+ cm_l4per_clkctrl: clock@20 {
+ compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+ reg = <0x20 0x1b0>;
+ #clock-cells = <2>;
+ };
+ };
+ };
+};
+
+Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h
+
+#define OMAP4_CLKCTRL_OFFSET 0x20
+#define OMAP4_CLKCTRL_INDEX(offset) ((offset) - OMAP4_CLKCTRL_OFFSET)
+#define MODULEMODE_HWCTRL 1
+#define MODULEMODE_SWCTRL 2
+
+#define OMAP4_GPTIMER10_CLKTRL OMAP4_CLKCTRL_INDEX(0x28)
+#define OMAP4_GPTIMER11_CLKTRL OMAP4_CLKCTRL_INDEX(0x30)
+#define OMAP4_GPTIMER2_CLKTRL OMAP4_CLKCTRL_INDEX(0x38)
+...
+#define OMAP4_GPIO2_CLKCTRL OMAP_CLKCTRL_INDEX(0x60)
+
+Example: Clock consumer node for GPIO2:
+
+&gpio2 {
+ clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0
+ &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
new file mode 100644
index 000000000..c35cb6c4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments keystone pll controller
+
+The main pll controller used to drive theC66x CorePacs, the switch fabric,
+and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
+the NETCP modules) requires a PLL Controller to manage the various clock
+divisions, gating, and synchronization.
+
+Required properties:
+
+- compatible: "ti,keystone-pllctrl", "syscon"
+
+- reg: contains offset/length value for pll controller
+ registers space.
+
+Example:
+
+pllctrl: pll-controller@02310000 {
+ compatible = "ti,keystone-pllctrl", "syscon";
+ reg = <0x02310000 0x200>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt
new file mode 100644
index 000000000..4c8a2ce2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt
@@ -0,0 +1,41 @@
+Binding for Texas Instruments ADPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped ADPLL with two to three selectable input clocks
+and three to four children.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of "ti,dm814-adpll-s-clock" or
+ "ti,dm814-adpll-lj-clock" depending on the type of the ADPLL
+- #clock-cells : from common clock binding; shall be set to 1.
+- clocks : link phandles of parent clocks clkinp and clkinpulow, note
+ that the adpll-s-clock also has an optional clkinphif
+- reg : address and length of the register set for controlling the ADPLL.
+
+Examples:
+ adpll_mpu_ck: adpll@40 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-s-clock";
+ reg = <0x40 0x40>;
+ clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow", "clkinphif";
+ clock-output-names = "481c5040.adpll.dcoclkldo",
+ "481c5040.adpll.clkout",
+ "481c5040.adpll.clkoutx2",
+ "481c5040.adpll.clkouthif";
+ };
+
+ adpll_dsp_ck: adpll@80 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x80 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5080.adpll.dcoclkldo",
+ "481c5080.adpll.clkout",
+ "481c5080.adpll.clkoutldo";
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
new file mode 100644
index 000000000..ade4dd4c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -0,0 +1,45 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+ It contains the information of registers in the following order:
+ "control" - contains the control register offset
+ "idlest" - contains the idlest register offset
+ "autoidle" - contains the autoidle register offset (OMAP2 only)
+- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
+- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
+- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
+
+Examples:
+ apll_pcie_ck: apll_pcie_ck {
+ #clock-cells = <0>;
+ clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+ reg = <0x021c>, <0x0220>;
+ compatible = "ti,dra7-apll-clock";
+ };
+
+ apll96_ck: apll96_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap2-apll-clock";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <2>;
+ ti,idlest-shift = <8>;
+ ti,clock-frequency = <96000000>;
+ reg = <0x0500>, <0x0530>, <0x0520>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
new file mode 100644
index 000000000..7c735dde9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -0,0 +1,39 @@
+Binding for Texas Instruments autoidle clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a register mapped
+clock which can be put to idle automatically by hardware based on the usage
+and a configuration bit setting. Autoidle clock is never an individual
+clock, it is always a derivative of some basic clock like a gate, divider,
+or fixed-factor.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- reg : offset for the register controlling the autoidle
+- ti,autoidle-shift : bit shift of the autoidle enable bit
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
+
+Examples:
+ dpll_core_m4_ck: dpll_core_m4_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ ti,autoidle-shift = <8>;
+ reg = <0x2d38>;
+ ti,index-starts-at-one;
+ ti,invert-autoidle-bit;
+ };
+
+ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&dpll_usb_ck>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01b4>;
+ ti,clock-mult = <1>;
+ ti,invert-autoidle-bit;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 000000000..cb76b3f2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,24 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1] in consumer role.
+Every clock on TI SoC belongs to one clockdomain, but software
+only needs this information for specific clocks which require
+their parent clockdomain to be controlled when the clock is
+enabled/disabled. This binding doesn't define a new clock
+binding type, it is used to group existing clock nodes under
+hardware hierarchy.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Examples:
+ dss_clkdm: dss_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
new file mode 100644
index 000000000..5f43c4706
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -0,0 +1,54 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <5>;
+ reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <4>;
+ ti,max-div = <1>;
+ reg = <0x0a40>;
+ ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt
new file mode 100644
index 000000000..1e03dce99
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt
@@ -0,0 +1,93 @@
+Binding for TI DA8XX/OMAP-L13X/AM17XX/AM18XX CFGCHIP clocks
+
+TI DA8XX/OMAP-L13X/AM17XX/AM18XX SoCs contain a general purpose set of
+registers call CFGCHIPn. Some of these registers function as clock
+gates. This document describes the bindings for those clocks.
+
+All of the clock nodes described below must be child nodes of a CFGCHIP node
+(compatible = "ti,da830-cfgchip").
+
+USB PHY clocks
+--------------
+Required properties:
+- compatible: shall be "ti,da830-usb-phy-clocks".
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "fck", "usb_refclkin", "auxclk"
+
+This node provides two clocks. The clock at index 0 is the USB 2.0 PHY 48MHz
+clock and the clock at index 1 is the USB 1.1 PHY 48MHz clock.
+
+eHRPWM Time Base Clock (TBCLK)
+------------------------------
+Required properties:
+- compatible: shall be "ti,da830-tbclksync".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandle to the parent clock
+- clock-names: shall be "fck"
+
+PLL DIV4.5 divider
+------------------
+Required properties:
+- compatible: shall be "ti,da830-div4p5ena".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandle to the parent clock
+- clock-names: shall be "pll0_pllout"
+
+EMIFA clock source (ASYNC1)
+---------------------------
+Required properties:
+- compatible: shall be "ti,da850-async1-clksrc".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "pll0_sysclk3", "div4.5"
+
+ASYNC3 clock source
+-------------------
+Required properties:
+- compatible: shall be "ti,da850-async3-clksrc".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "pll0_sysclk2", "pll1_sysclk2"
+
+Examples:
+
+ cfgchip: syscon@1417c {
+ compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+ reg = <0x1417c 0x14>;
+
+ usb_phy_clk: usb-phy-clocks {
+ compatible = "ti,da830-usb-phy-clocks";
+ #clock-cells = <1>;
+ clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>;
+ clock-names = "fck", "usb_refclkin", "auxclk";
+ };
+ ehrpwm_tbclk: ehrpwm_tbclk {
+ compatible = "ti,da830-tbclksync";
+ #clock-cells = <0>;
+ clocks = <&psc1 17>;
+ clock-names = "fck";
+ };
+ div4p5_clk: div4.5 {
+ compatible = "ti,da830-div4p5ena";
+ #clock-cells = <0>;
+ clocks = <&pll0_pllout>;
+ clock-names = "pll0_pllout";
+ };
+ async1_clk: async1 {
+ compatible = "ti,da850-async1-clksrc";
+ #clock-cells = <0>;
+ clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+ clock-names = "pll0_sysclk3", "div4.5";
+ };
+ async3_clk: async3 {
+ compatible = "ti,da850-async3-clksrc";
+ #clock-cells = <0>;
+ clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+ clock-names = "pll0_sysclk2", "pll1_sysclk2";
+ };
+ };
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
+
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
new file mode 100644
index 000000000..36998e184
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -0,0 +1,96 @@
+Binding for TI DaVinci PLL Controllers
+
+The PLL provides clocks to most of the components on the SoC. In addition
+to the PLL itself, this controller also contains bypasses, gates, dividers,
+an multiplexers for various clock signals.
+
+Required properties:
+- compatible: shall be one of:
+ - "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
+ - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area.
+- clocks: phandles corresponding to the clock names
+- clock-names: names of the clock sources - depends on compatible string
+ - for "ti,da850-pll0", shall be "clksrc", "extclksrc"
+ - for "ti,da850-pll1", shall be "clksrc"
+
+Optional properties:
+- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+ wave input on the OSCIN pin instead of using a crystal oscillator.
+ This property is only valid when compatible = "ti,da850-pll0".
+
+
+Optional child nodes:
+
+pllout
+ Describes the main PLL clock output (before POSTDIV). The node name must
+ be "pllout".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+sysclk
+ Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
+ domains. The node name must be "sysclk". Consumers of this node should
+ use "n" in "SYSCLKn" as the index parameter for the clock cell.
+
+ Required properties:
+ - #clock-cells: shall be 1
+
+auxclk
+ Describes the AUXCLK output of the PLL. The node name must be "auxclk".
+ This child node is only valid when compatible = "ti,da850-pll0".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+obsclk
+ Describes the OBSCLK output of the PLL. The node name must be "obsclk".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+
+Examples:
+
+ pll0: clock-controller@11000 {
+ compatible = "ti,da850-pll0";
+ reg = <0x11000 0x1000>;
+ clocks = <&ref_clk>, <&pll1_sysclk 3>;
+ clock-names = "clksrc", "extclksrc";
+ ti,clkmode-square-wave;
+
+ pll0_pllout: pllout {
+ #clock-cells = <0>;
+ };
+
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+
+ pll0_auxclk: auxclk {
+ #clock-cells = <0>;
+ };
+
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+
+ pll1: clock-controller@21a000 {
+ compatible = "ti,da850-pll1";
+ reg = <0x21a000 0x1000>;
+ clocks = <&ref_clk>;
+ clock-names = "clksrc";
+
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
new file mode 100644
index 000000000..5f746ebf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
@@ -0,0 +1,71 @@
+Binding for TI DaVinci Power Sleep Controller (PSC)
+
+The PSC provides power management, clock gating and reset functionality. It is
+primarily used for clocking.
+
+Required properties:
+- compatible: shall be one of:
+ - "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX
+ - "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area
+- #clock-cells: from common clock binding; shall be set to 1
+- #power-domain-cells: from generic power domain binding; shall be set to 1.
+- clocks: phandles to clocks corresponding to the clock-names property
+- clock-names: list of parent clock names - depends on compatible value
+ - for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2",
+ "pll0_sysclk4", "pll0_sysclk6", "async1"
+ - for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3"
+
+Optional properties:
+- #reset-cells: from reset binding; shall be set to 1 - only applicable when
+ at least one local domain provides a local reset.
+
+Consumers:
+
+ Clock, power domain and reset consumers shall use the local power domain
+ module ID (LPSC) as the index corresponding to the clock cell. Refer to
+ the device-specific datasheet to find these numbers. NB: Most local
+ domains only provide a clock/power domain and not a reset.
+
+Examples:
+
+ psc0: clock-controller@10000 {
+ compatible = "ti,da850-psc0";
+ reg = <0x10000 0x1000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+ <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>;
+ clock_names = "pll0_sysclk1", "pll0_sysclk2",
+ "pll0_sysclk4", "pll0_sysclk6", "async1";
+ };
+ psc1: clock-controller@227000 {
+ compatible = "ti,da850-psc1";
+ reg = <0x227000 0x1000>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>;
+ clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+ };
+
+ /* consumer */
+ dsp: dsp@11800000 {
+ compatible = "ti,da850-dsp";
+ reg = <0x11800000 0x40000>,
+ <0x11e00000 0x8000>,
+ <0x11f00000 0x8000>,
+ <0x01c14044 0x4>,
+ <0x01c14174 0x8>;
+ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ clocks = <&psc0 15>;
+ power-domains = <&psc0 15>;
+ resets = <&psc0 15>;
+ };
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
+- Documentation/devicetree/bindings/power/power-domain.yaml
+- Documentation/devicetree/bindings/reset/reset.txt
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
new file mode 100644
index 000000000..9b13b3297
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -0,0 +1,117 @@
+Binding for TI divider clock
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped adjustable clock rate divider that does not gate and has
+only one input clock or parent. By default the value programmed into
+the register is one less than the actual divisor value. E.g:
+
+register value actual divisor value
+0 1
+1 2
+2 3
+
+This assumption may be modified by the following optional properties:
+
+ti,index-starts-at-one - valid divisor values start at 1, not the default
+of 0. E.g:
+register value actual divisor value
+1 1
+2 2
+3 3
+
+ti,index-power-of-two - valid divisor values are powers of two. E.g:
+register value actual divisor value
+0 1
+1 2
+2 4
+
+Additionally an array of valid dividers may be supplied like so:
+
+ ti,dividers = <4>, <8>, <0>, <16>;
+
+Which will map the resulting values to a divisor table by their index:
+register value actual divisor value
+0 4
+1 8
+2 <invalid divisor, skipped>
+3 16
+
+Any zero value in this array means the corresponding bit-value is invalid
+and must not be used.
+
+The binding must also provide the register to control the divider and
+unless the divider array is provided, min and max dividers. Optionally
+the number of bits to shift that mask, if necessary. If the shift value
+is missing it is the same as supplying a zero shift.
+
+This binding can also optionally provide support to the hardware autoidle
+feature, see [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable divider
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,dividers : array of integers defining divisors
+- ti,bit-shift : number of bits to shift the divider value, defaults to 0
+- ti,min-div : min divisor for dividing the input clock rate, only
+ needed if the first divisor is offset from the default value (1)
+- ti,max-div : max divisor for dividing the input clock rate, only needed
+ if ti,dividers is not defined.
+- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
+ only valid if ti,dividers is not defined.
+- ti,index-power-of-two : valid divisor programming must be a power of two,
+ only valid if ti,dividers is not defined.
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
+ see [2]
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
+ see [2]
+- ti,set-rate-parent : clk_set_rate is propagated to parent
+- ti,latch-bit : latch the divider value to HW, only needed if the register
+ access requires this. As an example dra76x DPLL_GMAC H14 divider implements
+ such behavior.
+
+Examples:
+dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_usb_ck>;
+ ti,max-div = <127>;
+ reg = <0x190>;
+ ti,index-starts-at-one;
+};
+
+aess_fclk: aess_fclk@4a004528 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&abe_clk>;
+ ti,bit-shift = <24>;
+ reg = <0x528>;
+ ti,max-div = <2>;
+};
+
+dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&dpll_core_x2_ck>;
+ ti,max-div = <31>;
+ reg = <0x0134>;
+ ti,index-starts-at-one;
+};
+
+ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <8>;
+ reg = <0x0a40>;
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
new file mode 100644
index 000000000..df57009ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -0,0 +1,85 @@
+Binding for Texas Instruments DPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped DPLL with usually two selectable input clocks
+(reference clock and bypass clock), with digital phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) This binding has several
+sub-types, which effectively result in slightly different setup
+for the actual DPLL clock.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of:
+ "ti,omap3-dpll-clock",
+ "ti,omap3-dpll-core-clock",
+ "ti,omap3-dpll-per-clock",
+ "ti,omap3-dpll-per-j-type-clock",
+ "ti,omap4-dpll-clock",
+ "ti,omap4-dpll-x2-clock",
+ "ti,omap4-dpll-core-clock",
+ "ti,omap4-dpll-m4xen-clock",
+ "ti,omap4-dpll-j-type-clock",
+ "ti,omap5-mpu-dpll-clock",
+ "ti,am3-dpll-no-gate-clock",
+ "ti,am3-dpll-j-type-clock",
+ "ti,am3-dpll-no-gate-j-type-clock",
+ "ti,am3-dpll-clock",
+ "ti,am3-dpll-core-clock",
+ "ti,am3-dpll-x2-clock",
+ "ti,omap2-dpll-core-clock",
+
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks, first entry lists reference clock
+ and second entry bypass clock
+- reg : offsets for the register set for controlling the DPLL.
+ Registers are listed in following order:
+ "control" - contains the control register base address
+ "idlest" - contains the idle status register base address
+ "mult-div1" - contains the multiplier / divider register base address
+ "autoidle" - contains the autoidle register base address (optional)
+ ti,am3-* dpll types do not have autoidle register
+ ti,omap2-* dpll type does not support idlest / autoidle registers
+
+Optional properties:
+- DPLL mode setting - defining any one or more of the following overrides
+ default setting.
+ - ti,low-power-stop : DPLL supports low power stop mode, gating output
+ - ti,low-power-bypass : DPLL output matches rate of parent bypass clock
+ - ti,lock : DPLL locks in programmed rate
+
+Examples:
+ dpll_core_ck: dpll_core_ck@44e00490 {
+ #clock-cells = <0>;
+ compatible = "ti,omap4-dpll-core-clock";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x490>, <0x45c>, <0x488>, <0x468>;
+ };
+
+ dpll2_ck: dpll2_ck@48004004 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-dpll-clock";
+ clocks = <&sys_ck>, <&dpll2_fck>;
+ ti,low-power-stop;
+ ti,low-power-bypass;
+ ti,lock;
+ reg = <0x4>, <0x24>, <0x34>, <0x40>;
+ };
+
+ dpll_core_ck: dpll_core_ck@44e00490 {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-core-clock";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x90>, <0x5c>, <0x68>;
+ };
+
+ dpll_ck: dpll_ck {
+ #clock-cells = <0>;
+ compatible = "ti,omap2-dpll-core-clock";
+ clocks = <&sys_ck>, <&sys_ck>;
+ reg = <0x0500>, <0x0540>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
new file mode 100644
index 000000000..21c002d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -0,0 +1,94 @@
+Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
+
+The ATL IP is used to generate clock to be used to synchronize baseband and
+audio codec. A single ATL IP provides four ATL clock instances sharing the same
+functional clock but can be configured to provide different clocks.
+ATL can maintain a clock averages to some desired frequency based on the bws/aws
+signals - can compensate the drift between the two ws signal.
+
+In order to provide the support for ATL and it's output clocks (which can be used
+internally within the SoC or external components) two sets of bindings is needed:
+
+Clock tree binding:
+This binding uses the common clock binding[1].
+To be able to integrate the ATL clocks with DT clock tree.
+Provides ccf level representation of the ATL clocks to be used by drivers.
+Since the clock instances are part of a single IP this binding is used as a node
+for the DT clock tree, the IP driver is needed to handle the actual configuration
+of the IP.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-atl-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles to functional clock of ATL
+
+Binding for the IP driver:
+This binding is used to configure the IP driver which is going to handle the
+configuration of the IP for the ATL clock instances.
+
+Required properties:
+- compatible : shall be "ti,dra7-atl"
+- reg : base address for the ATL IP
+- ti,provided-clocks : List of phandles to the clocks associated with the ATL
+- clocks : link phandles to functional clock of ATL
+- clock-names : Shall be set to "fck"
+- ti,hwmods : Shall be set to "atl"
+
+Optional properties:
+Configuration of ATL instances:
+- atl{0/1/2/3} {
+ - bws : Baseband word select signal selection
+ - aws : Audio word select signal selection
+};
+
+For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include
+file.
+
+Examples:
+/* clock bindings for atl provided clocks */
+atl_clkin0_ck: atl_clkin0_ck {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin1_ck: atl_clkin1_ck {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin2_ck: atl_clkin2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin3_ck: atl_clkin3_ck {
+ #clock-cells = <0>;
+ compatible = "ti,dra7-atl-clock";
+ clocks = <&atl_gfclk_mux>;
+};
+
+/* binding for the IP */
+atl: atl@4843c000 {
+ compatible = "ti,dra7-atl";
+ reg = <0x4843c000 0x3ff>;
+ ti,hwmods = "atl";
+ ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+ <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+ clocks = <&atl_gfclk_mux>;
+ clock-names = "fck";
+};
+
+#include <dt-bindings/clock/ti-dra7-atl.h>
+
+&atl {
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt
new file mode 100644
index 000000000..c19b3f253
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt
@@ -0,0 +1,33 @@
+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+ main_fapll: main_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x400 0x40>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>, <5>,
+ <6>, <7>;
+ clock-output-names = "main_pll_clk1",
+ "main_pll_clk2",
+ "main_pll_clk3",
+ "main_pll_clk4",
+ "main_pll_clk5",
+ "main_pll_clk6",
+ "main_pll_clk7";
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
new file mode 100644
index 000000000..662b36d53
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -0,0 +1,43 @@
+Binding for TI fixed factor rate clock sources.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1], and also uses the autoidle
+support from TI autoidle clock [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- ti,clock-div: fixed divider.
+- ti,clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
+ see [2]
+- reg: offset for the autoidle register of this clock, see [2]
+- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
+- ti,set-rate-parent: clk_set_rate is propagated to parent
+
+Example:
+ clock {
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&parentclk>;
+ #clock-cells = <0>;
+ ti,clock-div = <2>;
+ ti,clock-mult = <1>;
+ };
+
+ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&dpll_usb_ck>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <8>;
+ reg = <0x01b4>;
+ ti,clock-mult = <1>;
+ ti,invert-autoidle-bit;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
new file mode 100644
index 000000000..56d603c1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -0,0 +1,106 @@
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+ "ti,gate-clock" - basic gate clock
+ "ti,wait-gate-clock" - gate clock which waits until clock is active before
+ returning from clk_enable()
+ "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+ "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+ "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+ clock directly from a clockdomain, see [3] how
+ to map clockdomains properly
+ "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+ required for a hardware errata
+ "ti,composite-gate-clock" - composite gate clock, to be part of composite
+ clock
+ "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
+ for clock to be active before returning
+ from clk_enable()
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+ ti,clkdm-gate-clock type
+
+Optional properties:
+- ti,bit-shift : bit shift for programming the clock gate, invalid for
+ ti,clkdm-gate-clock type
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+ gates the clock and clearing the bit ungates the clock.
+
+Examples:
+ mmchs2_fck: mmchs2_fck@48004a00 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&core_96m_fck>;
+ reg = <0x0a00>;
+ ti,bit-shift = <25>;
+ };
+
+ uart4_fck_am35xx: uart4_fck_am35xx {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clocks = <&core_48m_fck>;
+ reg = <0x0a00>;
+ ti,bit-shift = <23>;
+ };
+
+ dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
+ #clock-cells = <0>;
+ compatible = "ti,dss-gate-clock";
+ clocks = <&dpll4_m4x2_ck>;
+ reg = <0x0e00>;
+ ti,bit-shift = <0>;
+ };
+
+ emac_ick: emac_ick@4800259c {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-gate-clock";
+ clocks = <&ipss_ick>;
+ reg = <0x059c>;
+ ti,bit-shift = <1>;
+ };
+
+ emu_src_ck: emu_src_ck {
+ #clock-cells = <0>;
+ compatible = "ti,clkdm-gate-clock";
+ clocks = <&emu_src_mux_ck>;
+ };
+
+ dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
+ #clock-cells = <0>;
+ compatible = "ti,hsdiv-gate-clock";
+ clocks = <&dpll4_m2x2_mul_ck>;
+ ti,bit-shift = <0x1b>;
+ reg = <0x0d00>;
+ ti,set-bit-to-disable;
+ };
+
+ vlynq_gate_fck: vlynq_gate_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x0200>;
+ };
+
+ sys_clkout2_src_gate: sys_clkout2_src_gate {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clocks = <&core_ck>;
+ ti,bit-shift = <15>;
+ reg = <0x0070>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
new file mode 100644
index 000000000..3f4704040
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -0,0 +1,56 @@
+Binding for Texas Instruments interface clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+
+Required properties:
+- compatible : shall be one of:
+ "ti,omap3-interface-clock" - basic OMAP3 interface clock
+ "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
+ capability for waiting clock to be ready
+ "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
+ handling
+ "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
+ "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
+ "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+ "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
+ handling
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
+
+Examples:
+ aes1_ick: aes1_ick@48004a14 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clocks = <&security_l4_ick2>;
+ reg = <0x48004a14 0x4>;
+ ti,bit-shift = <3>;
+ };
+
+ cam_ick: cam_ick@48004f10 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clocks = <&l4_ick>;
+ reg = <0x48004f10 0x4>;
+ ti,bit-shift = <0>;
+ };
+
+ ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-ssi-interface-clock";
+ clocks = <&ssi_l4_ick>;
+ reg = <0x48004a10 0x4>;
+ ti,bit-shift = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
new file mode 100644
index 000000000..eec8994b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -0,0 +1,79 @@
+Binding for TI mux clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped multiplexer with multiple input clock signals or
+parents, one of which can be selected as output. This clock does not
+gate or adjust the parent rate via a divider or multiplier.
+
+By default the "clocks" property lists the parents in the same order
+as they are programmed into the regster. E.g:
+
+ clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+results in programming the register as follows:
+
+register value selected parent clock
+0 foo_clock
+1 bar_clock
+2 baz_clock
+
+Some clock controller IPs do not allow a value of zero to be programmed
+into the register, instead indexing begins at 1. The optional property
+"index-starts-at-one" modified the scheme as follows:
+
+register value selected clock parent
+1 foo_clock
+2 bar_clock
+3 baz_clock
+
+The binding must provide the register to control the mux. Optionally
+the number of bits to shift the control field in the register can be
+supplied. If the shift value is missing it is the same as supplying
+a zero shift.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks
+- reg : register offset for register controlling adjustable mux
+
+Optional properties:
+- ti,bit-shift : number of bits to shift the bit-mask, defaults to
+ 0 if not present
+- ti,index-starts-at-one : valid input select programming starts at 1, not
+ zero
+- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
+ not supported by the composite-mux-clock subtype
+- ti,latch-bit : latch the mux value to HW, only needed if the register
+ access requires this. As an example, dra7x DPLL_GMAC H14 muxing
+ implements such behavior.
+
+Examples:
+
+sys_clkin_ck: sys_clkin_ck@4a306110 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+ reg = <0x0110>;
+ ti,index-starts-at-one;
+};
+
+abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+ ti,bit-shift = <24>;
+ reg = <0x0108>;
+};
+
+mcbsp5_mux_fck: mcbsp5_mux_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ reg = <0x02d8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ux500.txt b/Documentation/devicetree/bindings/clock/ux500.txt
new file mode 100644
index 000000000..e52bd4b72
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ux500.txt
@@ -0,0 +1,64 @@
+Clock bindings for ST-Ericsson Ux500 clocks
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "stericsson,u8500-clks"
+ "stericsson,u8540-clks"
+ "stericsson,u9540-clks"
+- reg : shall contain base register location and length for
+ CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
+ CLKRST4, which does not exist.
+
+Required subnodes:
+- prcmu-clock: a subnode with one clock cell for PRCMU (power,
+ reset, control unit) clocks. The cell indicates which PRCMU
+ clock in the prcmu-clock node the consumer wants to use.
+- prcc-periph-clock: a subnode with two clock cells for
+ PRCC (programmable reset- and clock controller) peripheral clocks.
+ The first cell indicates which PRCC block the consumer
+ wants to use, possible values are 1, 2, 3, 5, 6. The second
+ cell indicates which clock inside the PRCC block it wants,
+ possible values are 0 thru 31.
+- prcc-kernel-clock: a subnode with two clock cells for
+ PRCC (programmable reset- and clock controller) kernel clocks
+ The first cell indicates which PRCC block the consumer
+ wants to use, possible values are 1, 2, 3, 5, 6. The second
+ cell indicates which clock inside the PRCC block it wants,
+ possible values are 0 thru 31.
+- rtc32k-clock: a subnode with zero clock cells for the 32kHz
+ RTC clock.
+- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
+ with zero clock cells.
+
+Example:
+
+clocks {
+ compatible = "stericsson,u8500-clks";
+ /*
+ * Registers for the CLKRST block on peripheral
+ * groups 1, 2, 3, 5, 6,
+ */
+ reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+ <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+ <0xa03cf000 0x1000>;
+
+ prcmu_clk: prcmu-clock {
+ #clock-cells = <1>;
+ };
+
+ prcc_pclk: prcc-periph-clock {
+ #clock-cells = <2>;
+ };
+
+ prcc_kclk: prcc-kernel-clock {
+ #clock-cells = <2>;
+ };
+
+ rtc_clk: rtc32k-clock {
+ #clock-cells = <0>;
+ };
+
+ smp_twd_clk: smp-twd-clock {
+ #clock-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt
new file mode 100644
index 000000000..63f9f1ac3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt
@@ -0,0 +1,41 @@
+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+ given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+- clock-names: list of names of clocks which are exteral input clocks to the
+ given clock controller.
+
+Input clocks for top clock controller:
+ - sxosc (external crystal oscillator 32KHz, recommended)
+ - fxosc (external crystal oscillator 24MHz, recommended)
+ - audio_ext
+ - enet_ext
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+ compatible = "fsl,vf610-ccm";
+ reg = <0x4006b000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&sxosc>, <&fxosc>;
+ clock-names = "sxosc", "fxosc";
+};
+
+uart1: serial@40028000 {
+ compatible = "fsl,vf610-uart";
+ reg = <0x40028000 0x1000>;
+ interrupts = <0 62 0x04>;
+ clocks = <&clks VF610_CLK_UART1>;
+ clock-names = "ipg";
+};
diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt
new file mode 100644
index 000000000..91d71cc03
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vt8500.txt
@@ -0,0 +1,74 @@
+Device Tree Clock bindings for arch-vt8500
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
+ "wm,wm8650-pll-clock" - for a WM8650 PLL clock
+ "wm,wm8750-pll-clock" - for a WM8750 PLL clock
+ "wm,wm8850-pll-clock" - for a WM8850 PLL clock
+ "via,vt8500-device-clock" - for a VT/WM device clock
+
+Required properties for PLL clocks:
+- reg : shall be the control register offset from PMC base for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Required properties for device clocks:
+- clocks : shall be the input parent clock phandle for the clock. This should
+ be a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+
+Device Clocks
+
+Device clocks are required to have one or both of the following sets of
+properties:
+
+
+Gated device clocks:
+
+Required properties:
+- enable-reg : shall be the register offset from PMC base for the enable
+ register.
+- enable-bit : shall be the bit within enable-reg to enable/disable the clock.
+
+
+Divisor device clocks:
+
+Required property:
+- divisor-reg : shall be the register offset from PMC base for the divisor
+ register.
+Optional property:
+- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f
+ if not specified.
+
+
+For example:
+
+ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+};
+
+plla: plla {
+ #clock-cells = <0>;
+ compatible = "wm,wm8650-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+};
+
+sdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x328>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x254>;
+ enable-bit = <18>;
+};
diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
new file mode 100644
index 000000000..8233e7717
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -0,0 +1,131 @@
+Device Tree Clock bindings for APM X-Gene
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
+ "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+ "apm,xgene-pmd-clock" - for a X-Gene PMD clock
+ "apm,xgene-device-clock" - for a X-Gene device clock
+ "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
+ "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
+
+Required properties for SoC or PCP PLL clocks:
+- reg : shall be the physical PLL register address for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the PLL referenced by derive
+ clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the PLL. If missing, use the device name.
+
+Required properties for PMD clocks:
+- reg : shall be the physical register address for the pmd clock.
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the clock referenced by derive
+ clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the clock. If missing, use the device name.
+
+Required properties for device clocks:
+- reg : shall be a list of address and length pairs describing the CSR
+ reset and/or the divider. Either may be omitted, but at least
+ one must be present.
+ - reg-names : shall be a string list describing the reg resource. This
+ may include "csr-reg" and/or "div-reg". If this property
+ is not present, the reg property is assumed to describe
+ only "csr-reg".
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the device referenced.
+Optional properties for device clocks:
+- clock-names : shall be the name of the device clock. If missing, use the
+ device name.
+- csr-offset : Offset to the CSR reset register from the reset address base.
+ Default is 0.
+- csr-mask : CSR reset mask bit. Default is 0xF.
+- enable-offset : Offset to the enable register from the reset address base.
+ Default is 0x8.
+- enable-mask : CSR enable mask bit. Default is 0xF.
+- divider-offset : Offset to the divider CSR register from the divider base.
+ Default is 0x0.
+- divider-width : Width of the divider register. Default is 0.
+- divider-shift : Bit shift of the divider register. Default is 0.
+
+For example:
+
+ pcppll: pcppll@17000100 {
+ compatible = "apm,xgene-pcppll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ clock-names = "pcppll";
+ reg = <0x0 0x17000100 0x0 0x1000>;
+ clock-output-names = "pcppll";
+ type = <0>;
+ };
+
+ pmd0clk: pmd0clk@7e200200 {
+ compatible = "apm,xgene-pmd-clock";
+ #clock-cells = <1>;
+ clocks = <&pmdpll 0>;
+ reg = <0x0 0x7e200200 0x0 0x10>;
+ clock-output-names = "pmd0clk";
+ };
+
+ socpll: socpll@17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ clock-names = "socpll";
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ type = <1>;
+ };
+
+ qmlclk: qmlclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "qmlclk";
+ reg = <0x0 0x1703C000 0x0 0x1000>;
+ reg-name = "csr-reg";
+ clock-output-names = "qmlclk";
+ };
+
+ ethclk: ethclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "ethclk";
+ reg = <0x0 0x17000000 0x0 0x1000>;
+ reg-names = "div-reg";
+ divider-offset = <0x238>;
+ divider-width = <0x9>;
+ divider-shift = <0x0>;
+ clock-output-names = "ethclk";
+ };
+
+ apbclk: apbclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&ahbclk 0>;
+ clock-names = "apbclk";
+ reg = <0x0 0x1F2AC000 0x0 0x1000
+ 0x0 0x1F2AC000 0x0 0x1000>;
+ reg-names = "csr-reg", "div-reg";
+ csr-offset = <0x0>;
+ csr-mask = <0x200>;
+ enable-offset = <0x8>;
+ enable-mask = <0x200>;
+ divider-offset = <0x10>;
+ divider-width = <0x2>;
+ divider-shift = <0x0>;
+ flags = <0x8>;
+ clock-output-names = "apbclk";
+ };
+
diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
new file mode 100644
index 000000000..7cd88bc3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal clock controller
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+ - Jolly Shah <jolly.shah@xilinx.com>
+ - Rajan Vaja <rajan.vaja@xilinx.com>
+
+description: |
+ The clock controller is a hardware block of Xilinx versal clock tree. It
+ reads required input clock frequencies from the devicetree and acts as clock
+ provider for all clock consumers of PS clocks.
+
+properties:
+ compatible:
+ const: xlnx,versal-clk
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ description: List of clock specifiers which are external input
+ clocks to the given clock controller.
+ items:
+ - description: reference clock
+ - description: alternate reference clock
+ - description: alternate reference clock for programmable logic
+
+ clock-names:
+ items:
+ - const: ref
+ - const: alt_ref
+ - const: pl_alt_ref
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ versal_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,versal-clk";
+ clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+ clock-names = "ref", "alt_ref", "pl_alt_ref";
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
new file mode 100644
index 000000000..391ee1a60
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
@@ -0,0 +1,63 @@
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells: Must be 1
+ - compatible: Must contain: "xlnx,zynqmp-clk"
+ - clocks: List of clock specifiers which are external input
+ clocks to the given clock controller. Please refer
+ the next section to find the input clocks for a
+ given controller.
+ - clock-names: List of clock names which are exteral input clocks
+ to the given clock controller. Please refer to the
+ clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX # with XX = 00..77
+ - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx-zynqmp-clk.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
new file mode 100644
index 000000000..5c91c9e4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
@@ -0,0 +1,34 @@
+Device Tree Clock bindings for ZTE zx296702
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "zte,zx296702-topcrm-clk":
+ zx296702 top clock selection, divider and gating
+
+ "zte,zx296702-lsp0crpm-clk" and
+ "zte,zx296702-lsp1crpm-clk":
+ zx296702 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
+for the full list of zx296702 clock IDs.
+
+
+topclk: topcrm@09800000 {
+ compatible = "zte,zx296702-topcrm-clk";
+ reg = <0x09800000 0x1000>;
+ #clock-cells = <1>;
+};
+
+uart0: serial@09405000 {
+ compatible = "zte,zx296702-uart";
+ reg = <0x09405000 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lsp1clk ZX296702_UART0_PCLK>;
+};
diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
new file mode 100644
index 000000000..3a46bf0b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
@@ -0,0 +1,37 @@
+Device Tree Clock bindings for ZTE zx296718
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "zte,zx296718-topcrm":
+ zx296718 top clock selection, divider and gating
+
+ "zte,zx296718-lsp0crm" and
+ "zte,zx296718-lsp1crm":
+ zx296718 device level clock selection and gating
+
+ "zte,zx296718-audiocrm":
+ zx296718 audio clock selection, divider and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296718-clock.h
+for the full list of zx296718 clock IDs.
+
+
+topclk: topcrm@1461000 {
+ compatible = "zte,zx296718-topcrm-clk";
+ reg = <0x01461000 0x1000>;
+ #clock-cells = <1>;
+};
+
+usbphy0:usb-phy0 {
+ compatible = "zte,zx296718-usb-phy";
+ #phy-cells = <0>;
+ clocks = <&topclk USB20_PHY_CLK>;
+ clock-names = "phyclk";
+};
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
new file mode 100644
index 000000000..d93746cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -0,0 +1,110 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== Clock Controller ==
+The clock controller is a logical abstraction of Zynq's clock tree. It reads
+required input clock frequencies from the devicetree and acts as clock provider
+for all clock consumers of PS clocks.
+
+Required properties:
+ - #clock-cells : Must be 1
+ - compatible : "xlnx,ps7-clkc"
+ - reg : SLCR offset and size taken via syscon < 0x100 0x100 >
+ - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
+ (usually 33 MHz oscillators are used for Zynq platforms)
+ - clock-output-names : List of strings used to name the clock outputs. Shall be
+ a list of the outputs given below.
+
+Optional properties:
+ - clocks : as described in the clock bindings
+ - clock-names : as described in the clock bindings
+ - fclk-enable : Bit mask to enable FCLKs statically at boot time.
+ Bit [0..3] correspond to FCLK0..FCLK3. The corresponding
+ FCLK will only be enabled if it is actually running at
+ boot time.
+
+Clock inputs:
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source.
+ - swdt_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - mio_clk_XX # with XX = 00..53
+...
+
+Clock outputs:
+ 0: armpll
+ 1: ddrpll
+ 2: iopll
+ 3: cpu_6or4x
+ 4: cpu_3or2x
+ 5: cpu_2x
+ 6: cpu_1x
+ 7: ddr2x
+ 8: ddr3x
+ 9: dci
+ 10: lqspi
+ 11: smc
+ 12: pcap
+ 13: gem0
+ 14: gem1
+ 15: fclk0
+ 16: fclk1
+ 17: fclk2
+ 18: fclk3
+ 19: can0
+ 20: can1
+ 21: sdio0
+ 22: sdio1
+ 23: uart0
+ 24: uart1
+ 25: spi0
+ 26: spi1
+ 27: dma
+ 28: usb0_aper
+ 29: usb1_aper
+ 30: gem0_aper
+ 31: gem1_aper
+ 32: sdio0_aper
+ 33: sdio1_aper
+ 34: spi0_aper
+ 35: spi1_aper
+ 36: can0_aper
+ 37: can1_aper
+ 38: i2c0_aper
+ 39: i2c1_aper
+ 40: uart0_aper
+ 41: uart1_aper
+ 42: gpio_aper
+ 43: lqspi_aper
+ 44: smc_aper
+ 45: swdt
+ 46: dbg_trc
+ 47: dbg_apb
+
+Example:
+ clkc: clkc@100 {
+ #clock-cells = <1>;
+ compatible = "xlnx,ps7-clkc";
+ ps-clk-frequency = <33333333>;
+ reg = <0x100 0x100>;
+ clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+ "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+ "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+ "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+ "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+ "dma", "usb0_aper", "usb1_aper", "gem0_aper",
+ "gem1_aper", "sdio0_aper", "sdio1_aper",
+ "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+ "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+ "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+ "dbg_trc", "dbg_apb";
+ # optional props
+ clocks = <&clkc 16>, <&clk_foo>;
+ clock-names = "gem1_emio_clk", "can_mio_clk_23";
+ };