diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 293 |
1 files changed, 293 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 000000000..f0e0345da --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,293 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda <spanda@codeaurora.org> + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + enum: [ 0x2c, 0x2d ] + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + ports: + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + additionalProperties: false + + description: + Video port for MIPI DSI input + + properties: + reg: + const: 0 + + endpoint: + type: object + additionalProperties: false + properties: + remote-endpoint: true + + required: + - reg + + port@1: + type: object + additionalProperties: false + + description: + Video port for eDP output (panel or connector). + + properties: + reg: + const: 1 + + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + See ../../media/video-interface.txt for details. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + See ../../media/video-interface.txt for details. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + See ../../media/video-interface.txt for details. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + description: See ../../media/video-interface.txt + + dependencies: + lane-polarities: [data-lanes] + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; |