summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/msm/gpu.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/display/msm/gpu.txt')
-rw-r--r--Documentation/devicetree/bindings/display/msm/gpu.txt150
1 files changed, 150 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
new file mode 100644
index 000000000..1af0ff102
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -0,0 +1,150 @@
+Qualcomm adreno/snapdragon GPU
+
+Required properties:
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or
+ "amd,imageon-XYZ.W", "amd,imageon"
+ for example: "qcom,adreno-306.0", "qcom,adreno"
+ Note that you need to list the less specific "qcom,adreno" (since this
+ is what the device is matched on), in addition to the more specific
+ with the chip-id.
+ If "amd,imageon" is used, there should be no top level msm device.
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the gpu.
+- clocks: device clocks (if applicable)
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required by a3xx, a4xx and a5xx
+ cores:
+ * "core"
+ * "iface"
+ * "mem_iface"
+ For GMU attached devices the GPU clocks are not used and are not required. The
+ following devices should not list clocks:
+ - qcom,adreno-630.2
+- iommus: optional phandle to an adreno iommu instance
+- operating-points-v2: optional phandle to the OPP operating points
+- interconnects: optional phandle to an interconnect provider. See
+ ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
+ will have two paths; all others will have one path.
+- interconnect-names: The names of the interconnect paths that correspond to the
+ interconnects property. Values must be gfx-mem and ocmem.
+- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
+ control the power for the GPU. Applicable targets:
+ - qcom,adreno-630.2
+- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
+ points to reserved memory to store the zap shader that can be used to help
+ bring the GPU out of secure mode.
+- firmware-name: optional property of the 'zap-shader' node, listing the
+ relative path of the device specific zap firmware.
+- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
+ a4xx Snapdragon SoCs. See
+ Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
+
+Example 3xx/4xx:
+
+/ {
+ ...
+
+ gpu: adreno@fdb00000 {
+ compatible = "qcom,adreno-330.2",
+ "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names = "core",
+ "iface",
+ "mem_iface";
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ sram = <&gpu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 0>;
+ };
+
+ gpu_sram: ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl",
+ "mem";
+
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core",
+ "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpu_sram: gpu-sram@0 {
+ reg = <0x0 0x100000>;
+ ranges = <0 0 0xfec00000 0x100000>;
+ };
+ };
+};
+
+Example a6xx (with GMU):
+
+/ {
+ ...
+
+ gpu@5000000 {
+ compatible = "qcom,adreno-630.2", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+ reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+ /*
+ * Look ma, no clocks! The GPU clocks and power are
+ * controlled entirely by the GMU
+ */
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+ interconnect-names = "gfx-mem";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-430000000 {
+ opp-hz = /bits/ 64 <430000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <5412000>;
+ };
+
+ opp-355000000 {
+ opp-hz = /bits/ 64 <355000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ opp-peak-kBps = <3072000>;
+ };
+
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <3072000>;
+ };
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ opp-peak-kBps = <1804000>;
+ };
+ };
+
+ qcom,gmu = <&gmu>;
+
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
+ };
+ };
+};