1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
new file mode 100644
index 000000000..c985871c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -0,0 +1,87 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+New bindings:
+=============
+Required properties:
+- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
+		Should be "fsl,imx28-lcdif" for i.MX28.
+		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+		Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
+- reg:		Address and length of the register set for LCDIF
+- interrupts:	Should contain LCDIF interrupt
+- clocks:	A list of phandle + clock-specifier pairs, one for each
+		entry in 'clock-names'.
+- clock-names:	A list of clock names. For MXSFB it should contain:
+    - "pix" for the LCDIF block clock
+    - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
+
+Required sub-nodes:
+  - port: The connection to an encoder chip.
+
+Example:
+
+	lcdif1: display-controller@2220000 {
+		compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+		reg = <0x02220000 0x4000>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+			 <&clks IMX6SX_CLK_LCDIF_APB>,
+			 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+		clock-names = "pix", "axi", "disp_axi";
+
+		port {
+			parallel_out: endpoint {
+				remote-endpoint = <&panel_in_parallel>;
+			};
+		};
+	};
+
+Deprecated bindings:
+====================
+Required properties:
+- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
+		Should be "fsl,imx28-lcdif" for i.MX28.
+- reg:		Address and length of the register set for LCDIF
+- interrupts:	Should contain LCDIF interrupts
+- display:	phandle to display node (see below for details)
+
+* display node
+
+Required properties:
+- bits-per-pixel:	<16> for RGB565, <32> for RGB888/666.
+- bus-width:		number of data lines.  Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings:	Refer to binding doc display-timing.txt for details.
+
+Examples:
+
+lcdif@80030000 {
+	compatible = "fsl,imx28-lcdif";
+	reg = <0x80030000 2000>;
+	interrupts = <38 86>;
+
+	display: display {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <164>;
+				hback-porch = <89>;
+				hsync-len = <10>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};