summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/mxsfb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/display/mxsfb.txt')
-rw-r--r--Documentation/devicetree/bindings/display/mxsfb.txt87
1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
new file mode 100644
index 000000000..c985871c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -0,0 +1,87 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+New bindings:
+=============
+Required properties:
+- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
+ Should be "fsl,imx28-lcdif" for i.MX28.
+ Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+ Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
+- reg: Address and length of the register set for LCDIF
+- interrupts: Should contain LCDIF interrupt
+- clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+- clock-names: A list of clock names. For MXSFB it should contain:
+ - "pix" for the LCDIF block clock
+ - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
+
+Required sub-nodes:
+ - port: The connection to an encoder chip.
+
+Example:
+
+ lcdif1: display-controller@2220000 {
+ compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+ reg = <0x02220000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+
+ port {
+ parallel_out: endpoint {
+ remote-endpoint = <&panel_in_parallel>;
+ };
+ };
+ };
+
+Deprecated bindings:
+====================
+Required properties:
+- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
+ Should be "fsl,imx28-lcdif" for i.MX28.
+- reg: Address and length of the register set for LCDIF
+- interrupts: Should contain LCDIF interrupts
+- display: phandle to display node (see below for details)
+
+* display node
+
+Required properties:
+- bits-per-pixel: <16> for RGB565, <32> for RGB888/666.
+- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings: Refer to binding doc display-timing.txt for details.
+
+Examples:
+
+lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <164>;
+ hback-porch = <89>;
+ hsync-len = <10>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};