summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml')
-rw-r--r--Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml70
1 files changed, 70 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 000000000..2329d9610
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+ - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+ This device can be used as bridge between a host controller and LCD panels.
+ Currently supported LCDs are:
+ - LCD-OLinuXino-4.3TS
+ - LCD-OLinuXino-5
+ - LCD-OLinuXino-7
+ - LCD-OLinuXino-10
+
+ The panel itself contains:
+ - AT24C16C EEPROM holding panel identification and timing requirements
+ - AR1021 resistive touch screen controller (optional)
+ - FT5x6 capacitive touch screnn controller (optional)
+ - GT911/GT928 capacitive touch screen controller (optional)
+
+ The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+ device information (id, serial, etc.) and timing requirements.
+
+ Touchscreen bingings can be found in these files:
+ - input/touchscreen/goodix.yaml
+ - input/touchscreen/edt-ft5x06.txt
+ - input/touchscreen/ar1021.txt
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: olimex,lcd-olinuxino
+
+ backlight: true
+ enable-gpios: true
+ power-supply: true
+ reg: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@50 {
+ compatible = "olimex,lcd-olinuxino";
+ reg = <0x50>;
+ power-supply = <&reg_vcc5v0>;
+ enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+ };
+
+...