summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml86
1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 000000000..4a36aa64c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ are usually driven in command mode. If no backlight is
+ referenced via the optional backlight property, the DSI
+ panel is assumed to have native backlight support.
+ The panel may use an OF graph binding for the association
+ to the display, or it may be a direct child node of the
+ display.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ items:
+ - enum:
+ - motorola,droid4-panel # Panel from Motorola Droid4 phone
+ - nokia,himalaya # Panel from Nokia N950 phone
+ - tpo,taal # Panel from OMAP4 SDP board
+ - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddi-supply:
+ description:
+ Display panels require power to be supplied. While several panels need
+ more than one power supply with panel-specific constraints governing the
+ order and timings of the power supplies, in many cases a single power
+ supply is sufficient, either because the panel has a single power rail, or
+ because all its power rails can be driven by the same supply. In that case
+ the vddi-supply property specifies the supply powering the panel as a
+ phandle to a regulator.
+
+ vpnl-supply:
+ description:
+ When the display panel needs a second power supply, this property can be
+ used in addition to vddi-supply. Both supplies will be enabled at the
+ same time before the panel is being accessed.
+
+ width-mm: true
+ height-mm: true
+ label: true
+ rotation: true
+ panel-timing: true
+ port: true
+ reset-gpios: true
+ te-gpios: true
+ backlight: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...