summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/rockchip
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt98
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt74
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt74
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt92
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt49
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml140
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml40
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt92
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml134
9 files changed, 793 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000000000..43561584c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,98 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-dp",
+ "rockchip,rk3399-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <&edp_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0: contained 2 endpoints, connecting to the output of vop.
+ Port 1: contained 1 endpoint, connecting to the input of panel.
+
+Optional property for different chips:
+- clocks: from common clock binding: handle to grf_vio clock.
+
+- clock-names: from common clock binding:
+ Required elements: "grf"
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+- force-hpd (optional)
+-------------------------------------------------------------------------------
+
+Example:
+ dp-controller: dp@ff970000 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <&grf>;
+ resets = <&cru 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hpd>;
+
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 000000000..8df7d2e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: must be "rockchip,rk3399-cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+ Required elements: "core-clk" "pclk" "spdif" "grf"
+
+- resets : a list of phandle + reset specifier pairs
+- reset-names : string of reset names
+ Required elements: "apb", "core", "dptx", "spdif"
+- power-domains : power-domain property defined with a phandle
+ to respective power domain.
+- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
+- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+- extcon: extcon specifier for the Power Delivery
+
+- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
+
+-------------------------------------------------------------------------------
+
+Example:
+ cdn_dp: dp@fec00000 {
+ compatible = "rockchip,rk3399-cdn-dp";
+ reg = <0x0 0xfec00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+ <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+ clock-names = "core-clk", "pclk", "spdif", "grf";
+ assigned-clocks = <&cru SCLK_DP_CORE>;
+ assigned-clock-rates = <100000000>;
+ power-domains = <&power RK3399_PD_HDCP>;
+ phys = <&tcphy0_dp>, <&tcphy1_dp>;
+ resets = <&cru SRST_DPTX_SPDIF_REC>;
+ reset-names = "spdif";
+ extcon = <&fusb0>, <&fusb1>;
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_dp>;
+ };
+
+ dp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_dp>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
new file mode 100644
index 000000000..3d32ce137
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip DWC HDMI TX Encoder
+============================
+
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with a companion PHY IP.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
+
+
+Required properties:
+
+- compatible: should be one of the following:
+ "rockchip,rk3228-dw-hdmi"
+ "rockchip,rk3288-dw-hdmi"
+ "rockchip,rk3328-dw-hdmi"
+ "rockchip,rk3399-dw-hdmi"
+- reg: See dw_hdmi.txt.
+- reg-io-width: See dw_hdmi.txt. Shall be 4.
+- interrupts: HDMI interrupt number
+- clocks: See dw_hdmi.txt.
+- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
+- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
+ corresponding to the video input of the controller. The port shall have two
+ endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
+- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
+
+Optional properties
+
+- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
+ or the functionally-reduced I2C master contained in the DWC HDMI. When
+ connected to a system I2C master this property contains a phandle to that
+ I2C master controller.
+- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
+- clock-names: May contain "cec" as defined in dw_hdmi.txt.
+- clock-names: May contain "grf", power for grf io.
+- clock-names: May contain "vpll", external clock for some hdmi phy.
+- phys: from general PHY binding: the phandle for the PHY device.
+- phy-names: Should be "hdmi" if phys references an external phy.
+
+Optional pinctrl entry:
+- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
+ will switch to the unwedge pinctrl state for 10ms if it ever gets an
+ i2c timeout. It's intended that this unwedge pinctrl entry will
+ cause the SDA line to be driven low to work around a hardware
+ errata.
+
+Example:
+
+hdmi: hdmi@ff980000 {
+ compatible = "rockchip,rk3288-dw-hdmi";
+ reg = <0xff980000 0x20000>;
+ reg-io-width = <4>;
+ ddc-i2c-bus = <&i2c5>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+ clock-names = "iahb", "isfr";
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 000000000..151be3bba
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,92 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: one of
+ "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
+ "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
+ "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
+- reg: Represent the physical address range of the controller.
+- interrupts: Represent the controller's interrupt to the CPU(s).
+- clocks, clock-names: Phandles to the controller's pll reference
+ clock(ref) when using an internal dphy and APB clock(pclk).
+ For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
+ are required. As described in [1].
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [2].
+ For vopb,set the reg = <0> and set the reg = <1> for vopl.
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+Optional properties:
+- phys: from general PHY binding: the phandle for the PHY device.
+- phy-names: Should be "dphy" if phys references an external phy.
+- power-domains: a phandle to mipi dsi power domain node.
+- resets: list of phandle + reset specifier pairs, as described in [3].
+- reset-names: string reset name, must be "apb".
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+[3] Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+ mipi_dsi: mipi@ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ resets = <&cru SRST_MIPIDSI0>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+
+ mipi_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&panel_in_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in_mipi: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
new file mode 100644
index 000000000..cec21714f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
@@ -0,0 +1,49 @@
+Rockchip specific extensions to the Innosilicon HDMI
+================================
+
+Required properties:
+- compatible:
+ "rockchip,rk3036-inno-hdmi";
+- reg:
+ Physical base address and length of the controller's registers.
+- clocks, clock-names:
+ Phandle to hdmi controller clock, name should be "pclk"
+- interrupts:
+ HDMI interrupt number
+- ports:
+ Contain one port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/graph.txt.
+- pinctrl-0, pinctrl-name:
+ Switch the iomux of HPD/CEC pins to HDMI function.
+
+Example:
+hdmi: hdmi@20034000 {
+ compatible = "rockchip,rk3036-inno-hdmi";
+ reg = <0x20034000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>;
+ clock-names = "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ctl>;
+
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_lcdc: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lcdc_out_hdmi>;
+ };
+ };
+};
+
+&pinctrl {
+ hdmi {
+ hdmi_ctl: hdmi-ctl {
+ rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
+ <1 9 RK_FUNC_1 &pcfg_pull_none>,
+ <1 10 RK_FUNC_1 &pcfg_pull_none>,
+ <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
new file mode 100644
index 000000000..4110d003c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3066 HDMI controller
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ const: rockchip,rk3066-hdmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: hclk
+
+ pinctrl-0:
+ maxItems: 2
+
+ pinctrl-names:
+ const: default
+ description:
+ Switch the iomux for the HPD/I2C pins to HDMI function.
+
+ power-domains:
+ maxItems: 1
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+
+ ports:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ description:
+ Port node with two endpoints, numbered 0 and 1,
+ connected respectively to vop0 and vop1.
+
+ port@1:
+ type: object
+ description:
+ Port node with one endpoint connected to a hdmi-connector node.
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+ - port@1
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pinctrl-0
+ - pinctrl-names
+ - power-domains
+ - rockchip,grf
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3066a-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/power/rk3066-power.h>
+ hdmi: hdmi@10116000 {
+ compatible = "rockchip,rk3066-hdmi";
+ reg = <0x10116000 0x2000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HDMI>;
+ clock-names = "hclk";
+ pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+ pinctrl-names = "default";
+ power-domains = <&power RK3066_PD_VIO>;
+ rockchip,grf = <&grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vop0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vop0_out_hdmi>;
+ };
+ hdmi_in_vop1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vop1_out_hdmi>;
+ };
+ };
+ hdmi_out: port@1 {
+ reg = <1>;
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ hdmi {
+ hdmi_hpd: hdmi-hpd {
+ rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+ };
+ hdmii2c_xfer: hdmii2c-xfer {
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
new file mode 100644
index 000000000..7204da5eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DRM master device
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The Rockchip DRM master device is a virtual device needed to list all
+ vop devices or other display interface nodes that comprise the
+ graphics subsystem.
+
+properties:
+ compatible:
+ const: rockchip,display-subsystem
+
+ ports:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ Should contain a list of phandles pointing to display interface port
+ of vop devices. vop definitions as defined in
+ Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
new file mode 100644
index 000000000..aaf8c44cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
@@ -0,0 +1,92 @@
+Rockchip RK3288 LVDS interface
+================================
+
+Required properties:
+- compatible: matching the soc type, one of
+ - "rockchip,rk3288-lvds";
+ - "rockchip,px30-lvds";
+
+- reg: physical base address of the controller and length
+ of memory mapped region.
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+- clock-names: must contain "pclk_lvds"
+
+- avdd1v0-supply: regulator phandle for 1.0V analog power
+- avdd1v8-supply: regulator phandle for 1.8V analog power
+- avdd3v3-supply: regulator phandle for 3.3V analog power
+
+- rockchip,grf: phandle to the general register files syscon
+- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
+
+- phys: LVDS/DSI DPHY (px30 only)
+- phy-names: name of the PHY, must be "dphy" (px30 only)
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this controller.
+
+Required nodes:
+
+The lvds has two video ports as described by
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+Example:
+
+lvds_panel: lvds-panel {
+ compatible = "auo,b101ean01";
+ enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ data-mapping = "jeida-24";
+
+ ports {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+};
+
+For Rockchip RK3288:
+
+ lvds: lvds@ff96c000 {
+ compatible = "rockchip,rk3288-lvds";
+ rockchip,grf = <&grf>;
+ reg = <0xff96c000 0x4000>;
+ clocks = <&cru PCLK_LVDS_PHY>;
+ clock-names = "pclk_lvds";
+ pinctrl-names = "lcdc";
+ pinctrl-0 = <&lcdc_ctl>;
+ avdd1v0-supply = <&vdd10_lcd>;
+ avdd1v8-supply = <&vcc18_lcd>;
+ avdd3v3-supply = <&vcca_33>;
+ rockchip,output = "rgb";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in: port@0 {
+ reg = <0>;
+
+ lvds_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+ lvds_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+
+ lvds_out: port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
new file mode 100644
index 000000000..ed8148e26
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+ VOP (Video Output Processor) is the display controller for the Rockchip
+ series of SoCs which transfers the image data from a video memory
+ buffer to an external LCD interface.
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-vop-big
+ - rockchip,px30-vop-lit
+ - rockchip,rk3036-vop
+ - rockchip,rk3066-vop
+ - rockchip,rk3126-vop
+ - rockchip,rk3188-vop
+ - rockchip,rk3228-vop
+ - rockchip,rk3288-vop
+ - rockchip,rk3328-vop
+ - rockchip,rk3366-vop
+ - rockchip,rk3368-vop
+ - rockchip,rk3399-vop-big
+ - rockchip,rk3399-vop-lit
+
+ reg:
+ minItems: 1
+ items:
+ - description:
+ Must contain one entry corresponding to the base address and length
+ of the register space.
+ - description:
+ Can optionally contain a second entry corresponding to
+ the CRTC gamma LUT address.
+
+ interrupts:
+ maxItems: 1
+ description:
+ The VOP interrupt is shared by several interrupt sources, such as
+ frame start (VSYNC), line flag and other status interrupts.
+
+ clocks:
+ items:
+ - description: Clock for ddr buffer transfer.
+ - description: Pixel clock.
+ - description: Clock for the ahb bus to R/W the phy regs.
+
+ clock-names:
+ items:
+ - const: aclk_vop
+ - const: dclk_vop
+ - const: hclk_vop
+
+ resets:
+ maxItems: 3
+
+ reset-names:
+ items:
+ - const: axi
+ - const: ahb
+ - const: dclk
+
+ port:
+ type: object
+ description:
+ A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+ assigned-clocks:
+ maxItems: 2
+
+ assigned-clock-rates:
+ maxItems: 2
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/rk3288-power.h>
+ vopb: vopb@ff930000 {
+ compatible = "rockchip,rk3288-vop";
+ reg = <0xff930000 0x19c>,
+ <0xff931000 0x1000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP0>,
+ <&cru DCLK_VOP0>,
+ <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
+ resets = <&cru SRST_LCDC1_AXI>,
+ <&cru SRST_LCDC1_AHB>,
+ <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vopb_out_edp: endpoint@0 {
+ reg = <0>;
+ remote-endpoint=<&edp_in_vopb>;
+ };
+ vopb_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint=<&hdmi_in_vopb>;
+ };
+ };
+ };