summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/zte,vou.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/display/zte,vou.txt')
-rw-r--r--Documentation/devicetree/bindings/display/zte,vou.txt120
1 files changed, 120 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt
new file mode 100644
index 000000000..38476475f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/zte,vou.txt
@@ -0,0 +1,120 @@
+ZTE VOU Display Controller
+
+This is a display controller found on ZTE ZX296718 SoC. It includes multiple
+Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks
+handling scaling, color space conversion etc. VOU also integrates the support
+for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD.
+
+* Master VOU node
+
+It must be the parent node of all the sub-device nodes.
+
+Required properties:
+ - compatible: should be "zte,zx296718-vou"
+ - #address-cells: should be <1>
+ - #size-cells: should be <1>
+ - ranges: list of address translations between VOU and sub-devices
+
+* VOU DPC device
+
+Required properties:
+ - compatible: should be "zte,zx296718-dpc"
+ - reg: Physical base address and length of DPC register regions, one for each
+ entry in 'reg-names'
+ - reg-names: The names of register regions. The following regions are required:
+ "osd"
+ "timing_ctrl"
+ "dtrc"
+ "vou_ctrl"
+ "otfppu"
+ - interrupts: VOU DPC interrupt number to CPU
+ - clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+ - clock-names: A list of clock names. The following clocks are required:
+ "aclk"
+ "ppu_wclk"
+ "main_wclk"
+ "aux_wclk"
+
+* HDMI output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-hdmi"
+ - reg: Physical base address and length of the HDMI device IO region
+ - interrupts : HDMI interrupt number to CPU
+ - clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+ - clock-names: A list of clock names. The following clocks are required:
+ "osc_cec"
+ "osc_clk"
+ "xclk"
+
+* TV Encoder output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-tvenc"
+ - reg: Physical base address and length of the TVENC device IO region
+ - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two
+ integer cells. The first cell is the offset of SYSCTRL register used
+ to control TV Encoder DAC power, and the second cell is the bit mask.
+
+* VGA output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-vga"
+ - reg: Physical base address and length of the VGA device IO region
+ - interrupts : VGA interrupt number to CPU
+ - clocks: Phandle with clock-specifier pointing to VGA I2C clock.
+ - clock-names: Must be "i2c_wclk".
+ - zte,vga-power-control: the phandle to SYSCTRL block followed by two
+ integer cells. The first cell is the offset of SYSCTRL register used
+ to control VGA DAC power, and the second cell is the bit mask.
+
+Example:
+
+vou: vou@1440000 {
+ compatible = "zte,zx296718-vou";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1440000 0x10000>;
+
+ dpc: dpc@0 {
+ compatible = "zte,zx296718-dpc";
+ reg = <0x0000 0x1000>, <0x1000 0x1000>,
+ <0x5000 0x1000>, <0x6000 0x1000>,
+ <0xa000 0x1000>;
+ reg-names = "osd", "timing_ctrl",
+ "dtrc", "vou_ctrl",
+ "otfppu";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
+ <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
+ clock-names = "aclk", "ppu_wclk",
+ "main_wclk", "aux_wclk";
+ };
+
+ vga: vga@8000 {
+ compatible = "zte,zx296718-vga";
+ reg = <0x8000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topcrm VGA_I2C_WCLK>;
+ clock-names = "i2c_wclk";
+ zte,vga-power-control = <&sysctrl 0x170 0xe0>;
+ };
+
+ hdmi: hdmi@c000 {
+ compatible = "zte,zx296718-hdmi";
+ reg = <0xc000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&topcrm HDMI_OSC_CEC>,
+ <&topcrm HDMI_OSC_CLK>,
+ <&topcrm HDMI_XCLK>;
+ clock-names = "osc_cec", "osc_clk", "xclk";
+ };
+
+ tvenc: tvenc@2000 {
+ compatible = "zte,zx296718-tvenc";
+ reg = <0x2000 0x1000>;
+ zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
+ };
+};