summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt59
1 files changed, 59 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
new file mode 100644
index 000000000..627efc78e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
@@ -0,0 +1,59 @@
+NXP LPC18xx/43xx GPIO controller Device Tree Bindings
+-----------------------------------------------------
+
+Required properties:
+- compatible : Should be "nxp,lpc1850-gpio"
+- reg : List of addresses and lengths of the GPIO controller
+ register sets
+- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
+ "gpio-gpoup1-ic"
+- clocks : Phandle and clock specifier pair for GPIO controller
+- resets : Phandle and reset specifier pair for GPIO controller
+- gpio-controller : Marks the device node as a GPIO controller
+- #gpio-cells : Should be two:
+ - The first cell is the GPIO line number
+ - The second cell is used to specify polarity
+- interrupt-controller : Marks the device node as an interrupt controller
+- #interrupt-cells : Should be two:
+ - The first cell is an interrupt number within
+ 0..9 range, for GPIO pin interrupts it is equal
+ to 'nxp,gpio-pin-interrupt' property value of
+ GPIO pin configuration, 8 is for GPIO GROUP0
+ interrupt, 9 is for GPIO GROUP1 interrupt
+ - The second cell is used to specify interrupt type
+
+Optional properties:
+- gpio-ranges : Mapping between GPIO and pinctrl
+
+Example:
+#define LPC_GPIO(port, pin) (port * 32 + pin)
+#define LPC_PIN(port, pin) (0x##port * 32 + pin)
+
+gpio: gpio@400f4000 {
+ compatible = "nxp,lpc1850-gpio";
+ reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
+ <0x40088000 0x1000>, <0x40089000 0x1000>;
+ reg-names = "gpio", "gpio-pin-ic",
+ "gpio-group0-ic", "gpio-gpoup1-ic";
+ clocks = <&ccu1 CLK_CPU_GPIO>;
+ resets = <&rgu 28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
+ ...
+ <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
+};
+
+gpio_joystick {
+ compatible = "gpio-keys";
+ ...
+
+ button0 {
+ ...
+ interrupt-parent = <&gpio>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+ gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+ };
+};