1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000..fa63b6171
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,54 @@
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+  Required properties:
+  - compatible: Must be "ti,ina3221"
+  - reg: I2C address
+
+  Optional properties:
+  - ti,single-shot: This chip has two power modes: single-shot (chip takes one
+                    measurement and then shuts itself down) and continuous (
+                    chip takes continuous measurements). The continuous mode is
+                    more reliable and suitable for hardware monitor type device,
+                    but the single-shot mode is more power-friendly and useful
+                    for battery-powered device which cares power consumptions
+                    while still needs some measurements occasionally.
+                    If this property is present, the single-shot mode will be
+                    used, instead of the default continuous one for monitoring.
+
+  = The node contains optional child nodes for three channels =
+  = Each child node describes the information of input source =
+
+  - #address-cells: Required only if a child node is present. Must be 1.
+  - #size-cells: Required only if a child node is present. Must be 0.
+
+2) child nodes
+  Required properties:
+  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+  Optional properties:
+  - label: Name of the input source
+  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+Example:
+
+ina3221@40 {
+	compatible = "ti,ina3221";
+	reg = <0x40>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	input@0 {
+		reg = <0x0>;
+		status = "disabled";
+	};
+	input@1 {
+		reg = <0x1>;
+		shunt-resistor-micro-ohms = <5000>;
+	};
+	input@2 {
+		reg = <0x2>;
+		label = "VDD_5V";
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};