summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-davinci.txt43
1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
new file mode 100644
index 000000000..b745f3706
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -0,0 +1,43 @@
+* Texas Instruments Davinci/Keystone I2C
+
+This file provides information, what the device node for the
+davinci/keystone i2c interface contains.
+
+Required properties:
+- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
+- reg : Offset and length of the register set for the device
+- clocks: I2C functional clock phandle.
+ For 66AK2G this property should be set per binding,
+ Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains: Should contain a phandle to a PM domain provider node
+ and an args specifier containing the I2C device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+
+Recommended properties :
+- interrupts : standard interrupt property.
+- clock-frequency : desired I2C bus clock frequency in Hz.
+- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
+ registers. PFUNC registers allow to switch I2C pins to function as
+ GPIOs, so they can be toggled manually.
+
+Example (enbw_cmc board):
+ i2c@1c22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ clock-frequency = <100000>;
+ interrupts = <15>;
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+ };