summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/i2c')
-rw-r--r--Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml63
-rw-r--r--Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml55
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt22
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml97
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt46
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt35
-rw-r--r--Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml60
-rw-r--r--Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml66
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-altera.txt39
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt82
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-arb.txt35
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-aspeed.txt49
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-at91.txt82
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-axxia.txt30
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt27
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-davinci.txt43
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt135
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-digicolor.txt25
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-efm32.txt33
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-exynos5.txt53
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-fsi.txt40
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-gate.txt41
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-gpio.yaml75
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt24
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-img-scb.txt26
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml64
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx.yaml109
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt20
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt33
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mpc.txt62
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt49
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mt7621.txt25
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt81
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt99
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt61
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt74
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt93
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt74
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux.txt73
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mxs.yaml51
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-nomadik.txt23
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-ocores.txt74
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-octeon.txt40
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-omap.txt36
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-opal.txt37
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-owl.txt29
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt27
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-pnx.txt34
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt93
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-pxa.yaml74
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt92
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml138
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt58
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-sirf.txt19
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-sprd.txt31
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-st.txt41
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-stu300.txt15
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-synquacer.txt29
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-versatile.txt10
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-wmt.txt24
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt15
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt22
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-zx2967.txt22
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt144
-rw-r--r--Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt25
-rw-r--r--Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml92
-rw-r--r--Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml128
-rw-r--r--Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt42
-rw-r--r--Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml62
-rw-r--r--Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt42
-rw-r--r--Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt87
-rw-r--r--Documentation/devicetree/bindings/i2c/nxp,pca9541.txt29
-rw-r--r--Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt40
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,i2c.txt66
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt22
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,iic.txt72
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,riic.txt32
-rw-r--r--Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml156
-rw-r--r--Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml52
-rw-r--r--Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml52
-rw-r--r--Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml144
-rw-r--r--Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml51
82 files changed, 4572 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
new file mode 100644
index 000000000..6097e8ac4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: allwinner,sun6i-a31-p2wi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 1
+ maximum: 6000000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c@1f03400 {
+ compatible = "allwinner,sun6i-a31-p2wi";
+ reg = <0x01f03400 0x400>;
+ interrupts = <0 39 4>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <100000>;
+ resets = <&apb0_rst 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axp221: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
new file mode 100644
index 000000000..6ecb0270d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson I2C Controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+ - Beniamino Galvani <b.galvani@gmail.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson6-i2c # Meson6, Meson8 and compatible SoCs
+ - amlogic,meson-gxbb-i2c # GXBB and compatible SoCs
+ - amlogic,meson-axg-i2c # AXG and compatible SoCs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c@c8100500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0xc8100500 0x20>;
+ interrupts = <92>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c32";
+ reg = <0x52>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
new file mode 100644
index 000000000..a8a35df41
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
@@ -0,0 +1,22 @@
+Broadcom BCM2835 I2C controller
+
+Required properties:
+- compatible : Should be one of:
+ "brcm,bcm2711-i2c"
+ "brcm,bcm2835-i2c"
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks : The clock feeding the I2C controller.
+
+Recommended properties:
+- clock-frequency : desired I2C bus clock frequency in Hz.
+
+Example:
+
+i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ clock-frequency = <100000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
new file mode 100644
index 000000000..edbca2476
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB BSC IIC Master Controller
+
+maintainers:
+ - Kamal Dasu <kdasu.kdev@gmail.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-hdmi-i2c
+ - brcm,brcmstb-i2c
+ - brcm,brcmper-i2c
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: BSC register range
+ - description: Auto-I2C register range
+
+ reg-names:
+ items:
+ - const: bsc
+ - const: auto-i2c
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+
+ clock-frequency:
+ enum:
+ - 46875
+ - 50000
+ - 93750
+ - 97500
+ - 187500
+ - 200000
+ - 375000
+ - 390000
+
+required:
+ - compatible
+ - reg
+ - clock-frequency
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm2711-hdmi-i2c
+
+then:
+ properties:
+ reg:
+ minItems: 2
+
+ required:
+ - reg-names
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
+examples:
+ - |
+ bsca: i2c@f0406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&irq0_intc>;
+ reg = <0xf0406200 0x58>;
+ interrupts = <0x18>;
+ interrupt-names = "upg_bsca";
+ };
+
+ - |
+ ddc0: i2c@7ef04500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <390000>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
new file mode 100644
index 000000000..d12cc33cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
@@ -0,0 +1,46 @@
+Broadcom iProc I2C controller
+
+Required properties:
+
+- compatible:
+ Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
+
+- reg:
+ Define the base and range of the I/O address space that contain the iProc
+ I2C controller registers
+
+- clock-frequency:
+ This is the I2C bus clock. Need to be either 100000 or 400000
+
+- #address-cells:
+ Always 1 (for I2C addresses)
+
+- #size-cells:
+ Always 0
+
+Optional properties:
+
+- interrupts:
+ Should contain the I2C interrupt. For certain revisions of the I2C
+ controller, I2C interrupt is unwired to the interrupt controller. In such
+ case, this property should be left unspecified, and driver will fall back
+ to polling mode
+
+- brcm,ape-hsls-addr-mask:
+ Required for "brcm,iproc-nic-i2c". Host view of address mask into the
+ 'APE' co-processor. Value must be unsigned, 32-bit
+
+Example:
+ i2c0: i2c@18008000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x18008000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+
+ codec: wm8750@1a {
+ compatible = "wlf,wm8750";
+ reg = <0x1a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
new file mode 100644
index 000000000..1b87b741f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
@@ -0,0 +1,35 @@
+Broadcom Kona Family I2C
+=========================
+
+This I2C controller is used in the following Broadcom SoCs:
+
+ BCM11130
+ BCM11140
+ BCM11351
+ BCM28145
+ BCM28155
+
+Required Properties
+-------------------
+- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: The interrupt number used by the controller
+- clocks: clock specifier for the kona i2c external clock
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Refer to clocks/clock-bindings.txt for generic clock consumer
+properties.
+
+Example:
+
+i2c@3e016000 {
+ compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
+ reg = <0x3e016000 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bsc1_clk>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
new file mode 100644
index 000000000..1ca1cd19b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence I2C controller Device Tree Bindings
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - cdns,i2c-r1p10 # cadence i2c controller version 1.0
+ - cdns,i2c-r1p14 # cadence i2c controller version 1.4
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 1
+ maximum: 400000
+ description: |
+ Desired operating frequency, in Hz, of the bus.
+
+ clock-name:
+ const: pclk
+ description: |
+ Input clock name.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ clocks = <&clkc 38>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xe0004000 0x1000>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
new file mode 100644
index 000000000..b386e4128
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+ - Doug Anderson <dianders@chromium.org>
+ - Benson Leung <bleung@chromium.org>
+ - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+ On some ChromeOS board designs we've got a connection to the EC
+ (embedded controller) but no direct connection to some devices on the
+ other side of the EC (like a battery and PMIC). To get access to
+ those devices we need to tunnel our i2c commands through the EC.
+
+ The node for this device should be under a cros-ec node like
+ google,cros-ec-spi or google,cros-ec-i2c.
+
+allOf:
+ - $ref: i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: google,cros-ec-i2c-tunnel
+
+ google,remote-bus:
+ description: The EC bus we'd like to talk to.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - google,remote-bus
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ google,remote-bus = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
new file mode 100644
index 000000000..767664f44
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
@@ -0,0 +1,39 @@
+* Altera I2C Controller
+* This is Altera's synthesizable logic block I2C Controller for use
+* in Altera's FPGAs.
+
+Required properties :
+ - compatible : should be "altr,softip-i2c-v1.0"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks : phandle to input clock.
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Recommended properties :
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Optional properties :
+ - fifo-size : Size of the RX and TX FIFOs in bytes.
+ - Child nodes conforming to i2c bus binding
+
+Example :
+
+ i2c@100080000 {
+ compatible = "altr,softip-i2c-v1.0";
+ reg = <0x00000001 0x00080000 0x00000040>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 43 4>;
+ clocks = <&clk_0>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-size = <4>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
new file mode 100644
index 000000000..548a73cde
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -0,0 +1,82 @@
+GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+=================================================================
+This uses GPIO lines and a challenge & response mechanism to arbitrate who is
+the master of an I2C bus in a multimaster situation.
+
+In many cases using GPIOs to arbitrate is not needed and a design can use
+the standard I2C multi-master rules. Using GPIOs is generally useful in
+the case where there is a device on the bus that has errata and/or bugs
+that makes standard multimaster mode not feasible.
+
+Note that this scheme works well enough but has some downsides:
+* It is nonstandard (not using standard I2C multimaster)
+* Having two masters on a bus in general makes it relatively hard to debug
+ problems (hard to tell if i2c issues were caused by one master, another, or
+ some device on the bus).
+
+
+Algorithm:
+
+All masters on the bus have a 'bus claim' line which is an output that the
+others can see. These are all active low with pull-ups enabled. We'll
+describe these lines as:
+
+- OUR_CLAIM: output from us signaling to other hosts that we want the bus
+- THEIR_CLAIMS: output from others signaling that they want the bus
+
+The basic algorithm is to assert your line when you want the bus, then make
+sure that the other side doesn't want it also. A detailed explanation is best
+done with an example.
+
+Let's say we want to claim the bus. We:
+1. Assert OUR_CLAIM.
+2. Waits a little bit for the other sides to notice (slew time, say 10
+ microseconds).
+3. Check THEIR_CLAIMS. If none are asserted then the we have the bus and we are
+ done.
+4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released.
+5. If not, back off, release the claim and wait for a few more milliseconds.
+6. Go back to 1 (until retry time has expired).
+
+
+Required properties:
+- compatible: i2c-arb-gpio-challenge
+- our-claim-gpio: The GPIO that we use to claim the bus.
+- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
+ Note that some implementations may only support a single other master.
+- I2C arbitration bus node. See i2c-arb.txt in this directory.
+
+Optional properties:
+- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
+- wait-retry-us: we'll attempt another claim after this many microseconds.
+ Default is 3000 us.
+- wait-free-us: we'll give up after this many microseconds. Default is 50000 us.
+
+
+Example:
+ i2c@12ca0000 {
+ compatible = "acme,some-i2c-device";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c-arbitrator {
+ compatible = "i2c-arb-gpio-challenge";
+
+ i2c-parent = <&{/i2c@12CA0000}>;
+
+ our-claim-gpio = <&gpf0 3 1>;
+ their-claim-gpios = <&gpe0 4 1>;
+ slew-delay-us = <10>;
+ wait-retry-us = <3000>;
+ wait-free-us = <50000>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@52 {
+ // Normal I2C device
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb.txt b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
new file mode 100644
index 000000000..59abf9277
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
@@ -0,0 +1,35 @@
+Common i2c arbitration bus properties.
+
+- i2c-arb child node
+
+Required properties for the i2c-arb child node:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties for i2c-arb child node:
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An NXP pca9541 I2C bus master selector at address 0x74
+ with a NXP pca8574 GPIO expander attached.
+ */
+
+ arb@74 {
+ compatible = "nxp,pca9541";
+ reg = <0x74>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
new file mode 100644
index 000000000..b47f6ccb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -0,0 +1,49 @@
+Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
+
+Required Properties:
+- #address-cells : should be 1
+- #size-cells : should be 0
+- reg : address offset and range of bus
+- compatible : should be "aspeed,ast2400-i2c-bus"
+ or "aspeed,ast2500-i2c-bus"
+ or "aspeed,ast2600-i2c-bus"
+- clocks : root clock of bus, should reference the APB
+ clock in the second cell
+- resets : phandle to reset controller with the reset number in
+ the second cell
+- interrupts : interrupt number
+
+Optional Properties:
+- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
+ specified
+- multi-master : states that there is another master active on this bus.
+
+Example:
+
+i2c {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
+
+ i2c_ic: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2400-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
+
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
new file mode 100644
index 000000000..2015f50ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -0,0 +1,82 @@
+I2C for Atmel platforms
+
+Required properties :
+- compatible : Must be one of:
+ "atmel,at91rm9200-i2c",
+ "atmel,at91sam9261-i2c",
+ "atmel,at91sam9260-i2c",
+ "atmel,at91sam9g20-i2c",
+ "atmel,at91sam9g10-i2c",
+ "atmel,at91sam9x5-i2c",
+ "atmel,sama5d4-i2c",
+ "atmel,sama5d2-i2c",
+ "microchip,sam9x60-i2c".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- dmas: A list of two dma specifiers, one for each entry in dma-names.
+- dma-names: should contain "tx" and "rx".
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+ capable I2C controllers.
+- i2c-sda-hold-time-ns: TWD hold time, only available for:
+ "atmel,sama5d4-i2c",
+ "atmel,sama5d2-i2c",
+ "microchip,sam9x60-i2c".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+ bus recovery, call it "gpio" state
+- Child nodes conforming to i2c bus binding
+
+
+Examples :
+
+i2c0: i2c@fff84000 {
+ compatible = "atmel,at91sam9g20-i2c";
+ reg = <0xfff84000 0x100>;
+ interrupts = <12 4 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ clock-frequency = <400000>;
+
+ 24c512@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ pagesize = <128>;
+ }
+}
+
+i2c0: i2c@f8034600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0xf8034600 0x100>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(11)>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(12)>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx0>;
+ atmel,fifo-size = <16>;
+ i2c-sda-hold-time-ns = <336>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ wm8731: wm8731@1a {
+ compatible = "wm8731";
+ reg = <0x1a>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
new file mode 100644
index 000000000..7d53a2b79
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
@@ -0,0 +1,30 @@
+LSI Axxia I2C
+
+Required properties :
+- compatible : Must be "lsi,api2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- #address-cells : Must be <1>;
+- #size-cells : Must be <0>;
+- clock-names : Must contain "i2c".
+- clocks: Must contain an entry for each name in clock-names. See the common
+ clock bindings.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used. As only Normal and Fast modes
+ are supported, possible values are 100000 and 400000.
+
+Example :
+
+i2c@2010084000 {
+ compatible = "lsi,api2c";
+ device_type = "i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20 0x10084000 0x00 0x1000>;
+ interrupts = <0 19 4>;
+ clocks = <&clk_per>;
+ clock-names = "i2c";
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
new file mode 100644
index 000000000..c143948b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
@@ -0,0 +1,27 @@
+Device tree bindings for i2c-cbus-gpio driver
+
+Required properties:
+ - compatible = "i2c-cbus-gpio";
+ - gpios: clk, dat, sel
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Optional properties:
+ - child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@0 {
+ compatible = "i2c-cbus-gpio";
+ gpios = <&gpio 66 0 /* clk */
+ &gpio 65 0 /* dat */
+ &gpio 64 0 /* sel */
+ >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ retu: retu@1 {
+ compatible = "nokia,retu";
+ reg = <0x1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
new file mode 100644
index 000000000..b745f3706
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -0,0 +1,43 @@
+* Texas Instruments Davinci/Keystone I2C
+
+This file provides information, what the device node for the
+davinci/keystone i2c interface contains.
+
+Required properties:
+- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
+- reg : Offset and length of the register set for the device
+- clocks: I2C functional clock phandle.
+ For 66AK2G this property should be set per binding,
+ Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains: Should contain a phandle to a PM domain provider node
+ and an args specifier containing the I2C device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+
+Recommended properties :
+- interrupts : standard interrupt property.
+- clock-frequency : desired I2C bus clock frequency in Hz.
+- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
+ registers. PFUNC registers allow to switch I2C pins to function as
+ GPIOs, so they can be toggled manually.
+
+Example (enbw_cmc board):
+ i2c@1c22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ clock-frequency = <100000>;
+ interrupts = <15>;
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dtt@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
new file mode 100644
index 000000000..81b5d5508
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
@@ -0,0 +1,135 @@
+Pinctrl-based I2C Bus DeMux
+
+This binding describes an I2C bus demultiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration using
+the pinctrl device tree bindings. This may be used to select one I2C IP core at
+runtime which may have a better feature set for a given task than another I2C
+IP core on the SoC. The most simple example is to fall back to GPIO bitbanging
+if your current runtime configuration hits an errata of the internal IP core.
+
+ +-------------------------------+
+ | SoC |
+ | | +-----+ +-----+
+ | +------------+ | | dev | | dev |
+ | |I2C IP Core1|--\ | +-----+ +-----+
+ | +------------+ \-------+ | | |
+ | |Pinctrl|--|------+--------+
+ | +------------+ +-------+ |
+ | |I2C IP Core2|--/ |
+ | +------------+ |
+ | |
+ +-------------------------------+
+
+Required properties:
+- compatible: "i2c-demux-pinctrl"
+- i2c-parent: List of phandles of I2C masters available for selection. The first
+ one will be used as default.
+- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
+ parents.
+
+Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this
+directory.
+
+Example:
+
+Here is a snipplet for a bus to be demuxed. It contains various i2c clients for
+HDMI, so the bus is named "i2c-hdmi":
+
+ i2chdmi: i2c@8 {
+
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ak4643: sound-codec@12 {
+ compatible = "asahi-kasei,ak4643";
+
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+ };
+
+And for clarification, here are the snipplets for the i2c-parents:
+
+ gpioi2c: i2c@9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
+ &gpio5 5 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+...
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "i2c-hdmi";
+
+ clock-frequency = <100000>;
+};
+
+...
+
+&iic2 {
+ pinctrl-0 = <&iic2_pins>;
+ pinctrl-names = "i2c-hdmi";
+
+ clock-frequency = <100000>;
+};
+
+Please note:
+
+- pinctrl properties for the parent I2C controllers need a pinctrl state
+ with the same name as i2c-bus-name, not "default"!
+
+- the i2c masters must have their status "disabled". This driver will
+ enable them at runtime when needed.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
new file mode 100644
index 000000000..457a098d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
@@ -0,0 +1,25 @@
+Conexant Digicolor I2C controller
+
+Required properties:
+ - compatible: must be "cnxt,cx92755-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+ absence of this property the default value is used (100 kHz).
+
+Example:
+
+ i2c: i2c@f0000120 {
+ compatible = "cnxt,cx92755-i2c";
+ reg = <0xf0000120 0x10>;
+ interrupts = <28>;
+ clocks = <&main_clk>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
new file mode 100644
index 000000000..3b30e54ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
@@ -0,0 +1,33 @@
+* Energymicro efm32 i2c controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "energymicro,efm32-i2c"
+ - interrupts : the interrupt number
+ - clocks : reference to the module clock
+
+Recommended properties :
+
+ - clock-frequency : maximal I2C bus clock frequency in Hz.
+ - energymicro,location : Decides the location of the USART I/O pins.
+ Allowed range : [0 .. 6]
+
+Example:
+ i2c0: i2c@4000a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-i2c";
+ reg = <0x4000a000 0x400>;
+ interrupts = <9>;
+ clocks = <&cmu clk_HFPERCLKI2C0>;
+ clock-frequency = <100000>;
+ energymicro,location = <3>;
+
+ eeprom@50 {
+ compatible = "microchip,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
new file mode 100644
index 000000000..2dbc0b62d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -0,0 +1,53 @@
+* Samsung's High Speed I2C controller
+
+The Samsung's High Speed I2C controller is used to interface with I2C devices
+at various speeds ranging from 100khz to 3.4Mhz.
+
+Required properties:
+ - compatible: value should be.
+ -> "samsung,exynos5-hsi2c", (DEPRECATED)
+ for i2c compatible with HSI2C available
+ on Exynos5250 and Exynos5420 SoCs.
+ -> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
+ on Exynos5250 and Exynos5420 SoCs.
+ -> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
+ on Exynos5260 SoCs.
+ -> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
+ on Exynos7 SoCs.
+
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+
+ - Pinctrl:
+ - pinctrl-0: Pin control group to be used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
+
+Optional properties:
+ - clock-frequency: Desired operating frequency in Hz of the bus.
+ -> If not specified, the bus operates in fast-speed mode at
+ at 100khz.
+ -> If specified, the bus operates in high-speed mode only if the
+ clock-frequency is >= 1Mhz.
+
+Example:
+
+hsi2c@12ca0000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12ca0000 0x100>;
+ interrupts = <56>;
+ clock-frequency = <100000>;
+
+ pinctrl-0 = <&i2c4_bus>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
new file mode 100644
index 000000000..b1be2ceb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
@@ -0,0 +1,40 @@
+Device-tree bindings for FSI-attached I2C master and busses
+-----------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,i2c-fsi";
+ - reg = < address size >; : The FSI CFAM address and address
+ space size.
+ - #address-cells = <1>; : Number of address cells in child
+ nodes.
+ - #size-cells = <0>; : Number of size cells in child nodes.
+ - child nodes : Nodes to describe busses off the I2C
+ master.
+
+Child node required properties:
+ - reg = < port number > : The port number on the I2C master.
+
+Child node optional properties:
+ - child nodes : Nodes to describe devices on the I2C
+ bus.
+
+Examples:
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = < 0x1800 0x400 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-bus@0 {
+ reg = <0>;
+ };
+
+ i2c-bus@1 {
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "vendor,dev-name";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.txt b/Documentation/devicetree/bindings/i2c/i2c-gate.txt
new file mode 100644
index 000000000..1846d236e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.txt
@@ -0,0 +1,41 @@
+An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
+to the i2c bus. Gates are similar to arbitrators in that you need to perform
+some kind of operation to access the i2c bus past the arbitrator/gate, but
+there are no competing masters to consider for gates and therefore there is
+no arbitration happening for gates.
+
+Common i2c gate properties.
+
+- i2c-gate child node
+
+Required properties for the i2c-gate child node:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties for i2c-gate child node:
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An Invensense mpu9150 at address 0x68 featuring an on-chip Asahi
+ Kasei ak8975 compass behind a gate.
+ */
+
+ mpu9150@68 {
+ compatible = "invensense,mpu9150";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 1>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ax8975@c {
+ compatible = "ak,ak8975";
+ reg = <0x0c>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
new file mode 100644
index 000000000..cc3aa2a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO bitbanged I2C
+
+maintainers:
+ - Wolfram Sang <wolfram@the-dreams.de>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: i2c-gpio
+
+ sda-gpios:
+ description:
+ gpio used for the sda signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ maxItems: 1
+
+ scl-gpios:
+ description:
+ gpio used for the scl signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ maxItems: 1
+
+ i2c-gpio,scl-output-only:
+ description: scl as output only
+ type: boolean
+
+ i2c-gpio,delay-us:
+ description: delay between GPIO operations (may depend on each platform)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ i2c-gpio,timeout-ms:
+ description: timeout to get data
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ # Deprecated properties, do not use in new device tree sources:
+ gpios:
+ minItems: 2
+ maxItems: 2
+ description: sda and scl gpio, alternative for {sda,scl}-gpios
+
+ i2c-gpio,sda-open-drain:
+ type: boolean
+ deprecated: true
+ description: this means that something outside of our control has put
+ the GPIO line used for SDA into open drain mode, and that something is
+ not the GPIO chip. It is essentially an inconsistency flag.
+
+ i2c-gpio,scl-open-drain:
+ type: boolean
+ deprecated: true
+ description: this means that something outside of our control has put the
+ GPIO line used for SCL into open drain mode, and that something is not
+ the GPIO chip. It is essentially an inconsistency flag.
+
+required:
+ - compatible
+ - sda-gpios
+ - scl-gpios
+
+unevaluatedProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
new file mode 100644
index 000000000..f98b37401
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
@@ -0,0 +1,24 @@
+I2C for Hisilicon hix5hd2 chipset platform
+
+Required properties:
+- compatible: Must be "hisilicon,hix5hd2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- Child nodes conforming to i2c bus binding
+
+Examples:
+I2C0@f8b10000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xf8b10000 0x1000>;
+ interrupts = <0 38 4>;
+ clocks = <&clock HIX5HD2_I2C0_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt
new file mode 100644
index 000000000..b6461602d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt
@@ -0,0 +1,26 @@
+IMG Serial Control Bus (SCB) I2C Controller
+
+Required Properties:
+- compatible: "img,scb-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: Interrupt number used by the controller
+- clocks : Should contain a clock specifier for each entry in clock-names
+- clock-names : Should contain the following entries:
+ "scb", for the SCB core clock.
+ "sys", for the system clock.
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Example:
+
+i2c@18100000 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100000 0x200>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c0_clk>, <&system_clk>;
+ clock-names = "scb", "sys";
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
new file mode 100644
index 000000000..29b9447f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Low Power Inter IC (LPI2C) for i.MX
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx7ulp-lpi2c
+ - fsl,imx8qm-lpi2c
+ - items:
+ - const: fsl,imx8qxp-lpi2c
+ - const: fsl,imx7ulp-lpi2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ assigned-clock-parents: true
+ assigned-clock-rates: true
+ assigned-clocks: true
+ clock-frequency: true
+
+ clock-names:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c@40a50000 {
+ compatible = "fsl,imx7ulp-lpi2c";
+ reg = <0x40A50000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7ULP_CLK_LPI2C7>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
new file mode 100644
index 000000000..f23966b0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+maintainers:
+ - Wolfram Sang <wolfram@the-dreams.de>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx1-i2c
+ - const: fsl,imx21-i2c
+ - const: fsl,vf610-i2c
+ - items:
+ - const: fsl,imx35-i2c
+ - const: fsl,imx1-i2c
+ - items:
+ - const: fsl,imx7d-i2c
+ - const: fsl,imx21-i2c
+ - items:
+ - enum:
+ - fsl,imx25-i2c
+ - fsl,imx27-i2c
+ - fsl,imx31-i2c
+ - fsl,imx50-i2c
+ - fsl,imx51-i2c
+ - fsl,imx53-i2c
+ - fsl,imx6q-i2c
+ - fsl,imx6sl-i2c
+ - fsl,imx6sx-i2c
+ - fsl,imx6sll-i2c
+ - fsl,imx6ul-i2c
+ - fsl,imx7s-i2c
+ - fsl,imx8mq-i2c
+ - fsl,imx8mm-i2c
+ - fsl,imx8mn-i2c
+ - fsl,imx8mp-i2c
+ - const: fsl,imx21-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ clock-frequency:
+ enum: [ 100000, 400000 ]
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ sda-gpios:
+ maxItems: 1
+
+ scl-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+ #include <dt-bindings/clock/vf610-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c@83fc4000 {
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
+ };
+
+ i2c@40066000 {
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40066000 0x1000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C0>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 50>,
+ <&edma0 0 51>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
new file mode 100644
index 000000000..dcc8390e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
@@ -0,0 +1,20 @@
+i2c Controller on XScale platforms such as IOP3xx and IXP4xx
+
+Required properties:
+- compatible : Must be one of
+ "intel,iop3xx-i2c"
+ "intel,ixp4xx-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@c8011000 {
+ compatible = "intel,ixp4xx-i2c";
+ reg = <0xc8011000 0x18>;
+ interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
new file mode 100644
index 000000000..4101aa621
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
@@ -0,0 +1,33 @@
+NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+Required properties:
+ - compatible: must be "nxp,lpc1788-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+ absence of this property the default value is used (100 kHz).
+
+Example:
+i2c0: i2c@400a1000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400a1000 0x1000>;
+ interrupts = <18>;
+ clocks = <&ccu1 CLK_APB1_I2C0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ lm75@48 {
+ compatible = "nxp,lm75";
+ reg = <0x48>;
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
new file mode 100644
index 000000000..42a390526
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
@@ -0,0 +1,62 @@
+* I2C
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+ compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+ mpc5200 or mpc5200b. For the mpc5121, an additional node
+ "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
+
+Recommended properties :
+
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+ from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+ - fsl,timeout : I2C bus timeout in microseconds.
+
+Examples :
+
+ /* MPC5121 based board */
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <100000>;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ /* MPC5200B based board */
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,preserve-clocking;
+ };
+
+ /* MPC8544 base board */
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <400000>;
+ fsl,timeout = <10000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
new file mode 100644
index 000000000..7f0194fdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -0,0 +1,49 @@
+* MediaTek's I2C controller
+
+The MediaTek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+ - compatible: value should be either of the following.
+ "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
+ "mediatek,mt2712-i2c": for MediaTek MT2712
+ "mediatek,mt6577-i2c": for MediaTek MT6577
+ "mediatek,mt6589-i2c": for MediaTek MT6589
+ "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
+ "mediatek,mt7622-i2c": for MediaTek MT7622
+ "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
+ "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
+ "mediatek,mt8173-i2c": for MediaTek MT8173
+ "mediatek,mt8183-i2c": for MediaTek MT8183
+ "mediatek,mt8192-i2c": for MediaTek MT8192
+ "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
+ - reg: physical base address of the controller and dma base, length of memory
+ mapped region.
+ - interrupts: interrupt number to the cpu.
+ - clock-div: the fixed value for frequency divider of clock source in i2c
+ module. Each IC may be different.
+ - clocks: clock name from clock manager
+ - clock-names: Must include "main" and "dma", "arb" is for multi-master that
+ one bus has more than two i2c controllers, if enable have-pmic need include
+ "pmic" extra.
+
+Optional properties:
+ - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+ is 100000.
+ - mediatek,have-pmic: platform can control i2c form special pmic side.
+ Only mt6589 and mt8135 support this feature.
+ - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+ i2c0: i2c@1100d000 {
+ compatible = "mediatek,mt6577-i2c";
+ reg = <0x1100d000 0x70>,
+ <0x11000300 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <400000>;
+ mediatek,have-pmic;
+ clock-div = <16>;
+ clocks = <&i2c0_ck>, <&ap_dma_ck>;
+ clock-names = "main", "dma";
+ };
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt b/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
new file mode 100644
index 000000000..bc36f0eb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
@@ -0,0 +1,25 @@
+MediaTek MT7621/MT7628 I2C master controller
+
+Required properties:
+
+- compatible: Should be one of the following:
+ - "mediatek,mt7621-i2c": for MT7621/MT7628/MT7688 platforms
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: Address and length of the register set for the device
+- resets: phandle to the reset controller asserting this device in
+ reset
+ See ../reset/reset.txt for details.
+
+Optional properties :
+
+Example:
+
+i2c: i2c@900 {
+ compatible = "mediatek,mt7621-i2c";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&rstctrl 16>;
+ reset-names = "i2c";
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
new file mode 100644
index 000000000..21da3ecbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
@@ -0,0 +1,81 @@
+GPIO-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses GPIOs to
+route the I2C signals.
+
+ +-----+ +-----+
+ | dev | | dev |
+ +------------+ +-----+ +-----+
+ | SoC | | |
+ | | /--------+--------+
+ | +------+ | +------+ child bus A, on GPIO value set to 0
+ | | I2C |-|--| Mux |
+ | +------+ | +--+---+ child bus B, on GPIO value set to 1
+ | | | \----------+--------+--------+
+ | +------+ | | | | |
+ | | GPIO |-|-----+ +-----+ +-----+ +-----+
+ | +------+ | | dev | | dev | | dev |
+ +------------+ +-----+ +-----+ +-----+
+
+Required properties:
+- compatible: i2c-mux-gpio
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+- mux-gpios: list of gpios used to control the muxer
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Optional properties:
+- idle-state: value to set the muxer to when idle. When no value is
+ given, it defaults to the last value used.
+
+For each i2c child node, an I2C child bus will be created. They will
+be numbered based on their order in the device tree.
+
+Whenever an access is made to a device on a child bus, the value set
+in the relevant node's reg property will be output using the list of
+GPIOs, the first in the list holding the least-significant value.
+
+If an idle state is defined, using the idle-state (optional) property,
+whenever an access is not being made to a device on a child bus, the
+GPIOs will be set according to the idle value.
+
+If an idle state is not defined, the most recently used value will be
+left programmed into hardware whenever no access is being made to a
+device on a child bus.
+
+Example:
+ i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+ i2c-parent = <&i2c1>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7 1>;
+ reset-active-low;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt
new file mode 100644
index 000000000..8b444b94e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt
@@ -0,0 +1,99 @@
+General Purpose I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses a mux controller
+from the mux subsystem to route the I2C signals.
+
+ .-----. .-----.
+ | dev | | dev |
+ .------------. '-----' '-----'
+ | SoC | | |
+ | | .--------+--------'
+ | .------. | .------+ child bus A, on MUX value set to 0
+ | | I2C |-|--| Mux |
+ | '------' | '--+---+ child bus B, on MUX value set to 1
+ | .------. | | '----------+--------+--------.
+ | | MUX- | | | | | |
+ | | Ctrl |-|-----+ .-----. .-----. .-----.
+ | '------' | | dev | | dev | | dev |
+ '------------' '-----' '-----' '-----'
+
+Required properties:
+- compatible: i2c-mux
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+- mux-controls: The phandle of the mux controller to use for operating the
+ mux.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number
+ is also the mux-controller state described in ../mux/mux-controller.txt
+
+Optional properties:
+- mux-locked: If present, explicitly allow unrelated I2C transactions on the
+ parent I2C adapter at these times:
+ + during setup of the multiplexer
+ + between setup of the multiplexer and the child bus I2C transaction
+ + between the child bus I2C transaction and releasing of the multiplexer
+ + during releasing of the multiplexer
+ However, I2C transactions to devices behind all I2C multiplexers connected
+ to the same parent adapter that this multiplexer is connected to are blocked
+ for the full duration of the complete multiplexed I2C transaction (i.e.
+ including the times covered by the above list).
+ If mux-locked is not present, the multiplexer is assumed to be parent-locked.
+ This means that no unrelated I2C transactions are allowed on the parent I2C
+ adapter for the complete multiplexed I2C transaction.
+ The properties of mux-locked and parent-locked multiplexers are discussed
+ in more detail in Documentation/i2c/i2c-topology.rst.
+
+For each i2c child node, an I2C child bus will be created. They will
+be numbered based on their order in the device tree.
+
+Whenever an access is made to a device on a child bus, the value set
+in the relevant node's reg property will be set as the state in the
+mux controller.
+
+Example:
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ mux-locked;
+ i2c-parent = <&i2c1>;
+
+ mux-controls = <&mux>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7 1>;
+ reset-active-low;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
new file mode 100644
index 000000000..8b1e49cdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
@@ -0,0 +1,61 @@
+* Linear Technology / Analog Devices I2C bus switch
+
+Required Properties:
+
+ - compatible: Must contain one of the following.
+ "lltc,ltc4305", "lltc,ltc4306"
+ - reg: The I2C address of the device.
+
+ The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.txt in this directory.
+ - I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Optional Properties:
+
+ - enable-gpios: Reference to the GPIO connected to the enable input.
+ - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+ children in idle state. This is necessary for example, if there are several
+ multiplexers on the bus and the devices behind them use same I2C addresses.
+ - gpio-controller: Marks the device node as a GPIO Controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ - ltc,downstream-accelerators-enable: Enables the rise time accelerators
+ on the downstream port.
+ - ltc,upstream-accelerators-enable: Enables the rise time accelerators
+ on the upstream port.
+
+Example:
+
+ ltc4306: i2c-mux@4a {
+ compatible = "lltc,ltc4306";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
new file mode 100644
index 000000000..7abda506b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -0,0 +1,74 @@
+* NXP PCA954x I2C bus switch
+
+The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
+
+Required Properties:
+
+ - compatible: Must contain one of the following.
+ "nxp,pca9540",
+ "nxp,pca9542",
+ "nxp,pca9543",
+ "nxp,pca9544",
+ "nxp,pca9545",
+ "nxp,pca9546", "nxp,pca9846",
+ "nxp,pca9547", "nxp,pca9847",
+ "nxp,pca9548", "nxp,pca9848",
+ "nxp,pca9849"
+
+ - reg: The I2C address of the device.
+
+ The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.txt in this directory.
+ - I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Optional Properties:
+
+ - reset-gpios: Reference to the GPIO connected to the reset input.
+ - idle-state: if present, overrides i2c-mux-idle-disconnect,
+ Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
+ - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+ children in idle state. This is necessary for example, if there are several
+ multiplexers on the bus and the devices behind them use same I2C addresses.
+ - interrupts: Interrupt mapping for IRQ.
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - #interrupt-cells : Should be two.
+ - first cell is the pin number
+ - second cell is used to specify flags.
+ See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example:
+
+ i2c-switch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ interrupt-parent = <&ipic>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
new file mode 100644
index 000000000..33119a98e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
@@ -0,0 +1,93 @@
+Pinctrl-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration
+using the pinctrl device tree bindings.
+
+ +-----+ +-----+
+ | dev | | dev |
+ +------------------------+ +-----+ +-----+
+ | SoC | | |
+ | /----|------+--------+
+ | +---+ +------+ | child bus A, on first set of pins
+ | |I2C|---|Pinmux| |
+ | +---+ +------+ | child bus B, on second set of pins
+ | \----|------+--------+--------+
+ | | | | |
+ +------------------------+ +-----+ +-----+ +-----+
+ | dev | | dev | | dev |
+ +-----+ +-----+ +-----+
+
+Required properties:
+- compatible: i2c-mux-pinctrl
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+
+Also required are:
+
+* Standard pinctrl properties that specify the pin mux state for each child
+ bus. See ../pinctrl/pinctrl-bindings.txt.
+
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+
+* I2C child bus nodes. See i2c-mux.txt in this directory.
+
+For each named state defined in the pinctrl-names property, an I2C child bus
+will be created. I2C child bus numbers are assigned based on the index into
+the pinctrl-names property.
+
+The only exception is that no bus will be created for a state named "idle". If
+such a state is defined, it must be the last entry in pinctrl-names. For
+example:
+
+ pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
+ pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
+ pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
+
+Whenever an access is made to a device on a child bus, the relevant pinctrl
+state will be programmed into hardware.
+
+If an idle state is defined, whenever an access is not being made to a device
+on a child bus, the idle pinctrl state will be programmed into hardware.
+
+If an idle state is not defined, the most recently used pinctrl state will be
+left programmed into hardware whenever no access is being made of a device on
+a child bus.
+
+Example:
+
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c1>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom {
+ compatible = "eeprom";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom {
+ compatible = "eeprom";
+ reg = <0x50>;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
new file mode 100644
index 000000000..de00d7fc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
@@ -0,0 +1,74 @@
+Register-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses a single register
+to route the I2C signals.
+
+Required properties:
+- compatible: i2c-mux-reg
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+ port is connected to.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Optional properties:
+- reg: this pair of <offset size> specifies the register to control the mux.
+ The <offset size> depends on its parent node. It can be any memory-mapped
+ address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the
+ resource of this device will be used.
+- little-endian: The existence indicates the register is in little endian.
+- big-endian: The existence indicates the register is in big endian.
+ If both little-endian and big-endian are omitted, the endianness of the
+ CPU will be used.
+- write-only: The existence indicates the register is write-only.
+- idle-state: value to set the muxer to when idle. When no value is
+ given, it defaults to the last value used.
+
+Whenever an access is made to a device on a child bus, the value set
+in the relevant node's reg property will be output to the register.
+
+If an idle state is defined, using the idle-state (optional) property,
+whenever an access is not being made to a device on a child bus, the
+register will be set according to the idle value.
+
+If an idle state is not defined, the most recently used value will be
+left programmed into the register.
+
+Example of a mux on PCIe card, the host is a powerpc SoC (big endian):
+
+ i2c-mux {
+ /* the <offset size> depends on the address translation
+ * of the parent device. If omitted, device resource
+ * will be used instead. The size is to determine
+ * whether iowrite32, iowrite16, or iowrite8 will be used.
+ */
+ reg = <0x6028 0x4>;
+ little-endian; /* little endian register on PCIe */
+ compatible = "i2c-mux-reg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c1>;
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ si5338: clock-generator@70 {
+ compatible = "silabs,si5338";
+ reg = <0x70>;
+ /* other stuff */
+ };
+ };
+
+ i2c@1 {
+ /* data is written using iowrite32 */
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ si5338: clock-generator@70 {
+ compatible = "silabs,si5338";
+ reg = <0x70>;
+ /* other stuff */
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
new file mode 100644
index 000000000..b38f58a1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
@@ -0,0 +1,73 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner. The nodes for an i2c bus
+multiplexer/switch will have one child node for each child bus.
+
+Optional properties:
+- #address-cells = <1>;
+ This property is required if the i2c-mux child node does not exist.
+
+- #size-cells = <0>;
+ This property is required if the i2c-mux child node does not exist.
+
+- i2c-mux
+ For i2c multiplexers/switches that have child nodes that are a mixture
+ of both i2c child busses and other child nodes, the 'i2c-mux' subnode
+ can be used for populating the i2c child busses. If an 'i2c-mux'
+ subnode is present, only subnodes of this will be considered as i2c
+ child busses.
+
+Required properties for the i2c-mux child node:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for i2c child bus nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for i2c child bus nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An NXP pca9548 8 channel I2C multiplexer at address 0x70
+ with two NXP pca8574 GPIO expanders attached, one each to
+ ports 3 and 4.
+ */
+
+ mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ gpio1: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ gpio2: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
new file mode 100644
index 000000000..21ae7bce0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Inter IC (I2C) Controller
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-i2c
+ - fsl,imx28-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000 ]
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@80058000 {
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 2000>;
+ interrupts = <111>;
+ clock-frequency = <100000>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
new file mode 100644
index 000000000..72065b0ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
@@ -0,0 +1,23 @@
+I2C for Nomadik based systems
+
+Required (non-standard) properties:
+ - Nil
+
+Recommended (non-standard) properties:
+ - clock-frequency : Maximum bus clock frequency for the device
+
+Optional (non-standard) properties:
+ - Nil
+
+Example :
+
+i2c@80004000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x80004000 0x1000>;
+ interrupts = <0 21 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ v-i2c-supply = <&db8500_vape_reg>;
+
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
new file mode 100644
index 000000000..6b25a80ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -0,0 +1,74 @@
+Device tree configuration for i2c-ocores
+
+Required properties:
+- compatible : "opencores,i2c-ocores"
+ "aeroflexgaisler,i2cmst"
+ "sifive,fu540-c000-i2c", "sifive,i2c0"
+ For Opencore based I2C IP block reimplemented in
+ FU540-C000 SoC. Please refer to sifive-blocks-ip-versioning.txt
+ for additional details.
+- reg : bus address start and address range size of device
+- clocks : handle to the controller clock; see the note below.
+ Mutually exclusive with opencores,ip-clock-frequency
+- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
+ see the note below. Mutually exclusive with clocks
+- #address-cells : should be <1>
+- #size-cells : should be <0>
+
+Optional properties:
+- interrupts : interrupt number.
+- clock-frequency : frequency of bus clock in Hz; see the note below.
+ Defaults to 100 KHz when the property is not specified
+- reg-shift : device register offsets are shifted by this value
+- reg-io-width : io register width in bytes (1, 2 or 4)
+- regstep : deprecated, use reg-shift above
+
+Note
+clock-frequency property is meant to control the bus frequency for i2c bus
+drivers, but it was incorrectly used to specify i2c controller input clock
+frequency. So the following rules are set to fix this situation:
+- if clock-frequency is present and neither opencores,ip-clock-frequency nor
+ clocks are, then clock-frequency specifies i2c controller clock frequency.
+ This is to keep backwards compatibility with setups using old DTB. i2c bus
+ frequency is fixed at 100 KHz.
+- if clocks is present it specifies i2c controller clock. clock-frequency
+ property specifies i2c bus frequency.
+- if opencores,ip-clock-frequency is present it specifies i2c controller
+ clock frequency. clock-frequency property specifies i2c bus frequency.
+
+Examples:
+
+ i2c0: ocores@a0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "opencores,i2c-ocores";
+ reg = <0xa0000000 0x8>;
+ interrupts = <10>;
+ opencores,ip-clock-frequency = <20000000>;
+
+ reg-shift = <0>; /* 8 bit registers */
+ reg-io-width = <1>; /* 8 bit read/write */
+
+ dummy@60 {
+ compatible = "dummy";
+ reg = <0x60>;
+ };
+ };
+or
+ i2c0: ocores@a0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "opencores,i2c-ocores";
+ reg = <0xa0000000 0x8>;
+ interrupts = <10>;
+ clocks = <&osc>;
+ clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+ reg-shift = <0>; /* 8 bit registers */
+ reg-io-width = <1>; /* 8 bit read/write */
+
+ dummy@60 {
+ compatible = "dummy";
+ reg = <0x60>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
new file mode 100644
index 000000000..872d485df
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
@@ -0,0 +1,40 @@
+* Two Wire Serial Interface (TWSI) / I2C
+
+- compatible: "cavium,octeon-3860-twsi"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+ or
+
+ compatible: "cavium,octeon-7890-twsi"
+
+ Compatibility with cn78XX SOCs.
+
+- reg: The base address of the TWSI/I2C bus controller register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>. I2C addresses have no size component.
+
+- interrupts: A single interrupt specifier.
+
+- clock-frequency: The I2C bus clock rate in Hz.
+
+Example:
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <0 45>;
+ clock-frequency = <100000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
new file mode 100644
index 000000000..a44573d7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
@@ -0,0 +1,36 @@
+I2C for OMAP platforms
+
+Required properties :
+- compatible : Must be
+ "ti,omap2420-i2c" for OMAP2420 SoCs
+ "ti,omap2430-i2c" for OMAP2430 SoCs
+ "ti,omap3-i2c" for OMAP3 SoCs
+ "ti,omap4-i2c" for OMAP4+ SoCs
+ "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs
+ "ti,j721e-i2c", "ti,omap4-i2c" for J721E SoCs
+- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Recommended properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
+ the default 100 kHz frequency will be used.
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Note: Current implementation will fetch base address, irq and dma
+from omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples :
+
+i2c1: i2c@0 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-opal.txt b/Documentation/devicetree/bindings/i2c/i2c-opal.txt
new file mode 100644
index 000000000..12bc61465
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-opal.txt
@@ -0,0 +1,37 @@
+Device-tree bindings for I2C OPAL driver
+----------------------------------------
+
+Most of the device node and properties layout is specific to the firmware and
+used by the firmware itself for configuring the port. From the linux
+perspective, the properties of use are "ibm,port-name" and "ibm,opal-id".
+
+Required properties:
+
+- reg: Port-id within a given master
+- compatible: must be "ibm,opal-i2c"
+- ibm,opal-id: Refers to a specific bus and used to identify it when calling
+ the relevant OPAL functions.
+- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for
+ linux, used by the FW though.
+
+Optional properties:
+- ibm,port-name: Firmware provides this name that uniquely identifies the i2c
+ port.
+
+The node contains a number of other properties that are used by the FW itself
+and depend on the specific hardware implementation. The example below depicts
+a P8 on-chip bus.
+
+Example:
+
+i2c-bus@0 {
+ reg = <0x0>;
+ bus-frequency = <0x61a80>;
+ compatible = "ibm,power8-i2c-port", "ibm,opal-i2c";
+ ibm,opal-id = <0x1>;
+ ibm,port-name = "p8_00000000_e1p0";
+ #address-cells = <0x1>;
+ phandle = <0x10000006>;
+ #size-cells = <0x0>;
+ linux,phandle = <0x10000006>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.txt b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
new file mode 100644
index 000000000..54c05dbdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
@@ -0,0 +1,29 @@
+Actions Semiconductor Owl I2C controller
+
+Required properties:
+
+- compatible : Should be one of the following:
+ - "actions,s700-i2c" for S700 SoC
+ - "actions,s900-i2c" for S900 SoC
+- reg : Offset and length of the register set for the device.
+- #address-cells : Should be 1.
+- #size-cells : Should be 0.
+- interrupts : A single interrupt specifier.
+- clocks : Phandle of the clock feeding the I2C controller.
+
+Optional properties:
+
+- clock-frequency : Desired I2C bus clock frequency in Hz. As only Normal and
+ Fast modes are supported, possible values are 100000 and
+ 400000.
+Examples:
+
+ i2c0: i2c@e0170000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_I2C0>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
new file mode 100644
index 000000000..73a693d66
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -0,0 +1,27 @@
+* NXP PCA PCA9564/PCA9665 I2C controller
+
+The PCA9564/PCA9665 serves as an interface between most standard
+parallel-bus microcontrollers/microprocessors and the serial I2C-bus
+and allows the parallel bus system to communicate bi-directionally
+with the I2C-bus.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : one of "nxp,pca9564" or "nxp,pca9665"
+
+Optional properties
+ - interrupts : the interrupt number
+ - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
+ is active low, it should be marked GPIO_ACTIVE_LOW.
+ - clock-frequency : I2C bus frequency.
+
+Example:
+ i2c0: i2c@80000 {
+ compatible = "nxp,pca9564";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80000 0x4>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
new file mode 100644
index 000000000..2a59006cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
@@ -0,0 +1,34 @@
+* NXP PNX I2C Controller
+
+Required properties:
+
+ - reg: Offset and length of the register set for the device
+ - compatible: should be "nxp,pnx-i2c"
+ - interrupts: configure one interrupt line
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+
+Optional properties:
+
+ - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
+
+Examples:
+
+ i2c1: i2c@400a0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a0000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <51 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@400a8000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a8000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <50 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
new file mode 100644
index 000000000..569b16248
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
@@ -0,0 +1,93 @@
+CE4100 I2C
+----------
+
+CE4100 has one PCI device which is described as the I2C-Controller. This
+PCI device has three PCI-bars, each bar contains a complete I2C
+controller. So we have a total of three independent I2C-Controllers
+which share only an interrupt line.
+The driver is probed via the PCI-ID and is gathering the information of
+attached devices from the devices tree.
+Grant Likely recommended to use the ranges property to map the PCI-Bar
+number to its physical address and to use this to find the child nodes
+of the specific I2C controller. This were his exact words:
+
+ Here's where the magic happens. Each entry in
+ ranges describes how the parent pci address space
+ (middle group of 3) is translated to the local
+ address space (first group of 2) and the size of
+ each range (last cell). In this particular case,
+ the first cell of the local address is chosen to be
+ 1:1 mapped to the BARs, and the second is the
+ offset from be base of the BAR (which would be
+ non-zero if you had 2 or more devices mapped off
+ the same BAR)
+
+ ranges allows the address mapping to be described
+ in a way that the OS can interpret without
+ requiring custom device driver code.
+
+This is an example which is used on FalconFalls:
+------------------------------------------------
+ i2c-controller@b,2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "pci8086,2e68.2",
+ "pci8086,2e68",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15a00 0x0 0x0 0x0 0x0>;
+ interrupts = <16 1>;
+
+ /* as described by Grant, the first number in the group of
+ * three is the bar number followed by the 64bit bar address
+ * followed by size of the mapping. The bar address
+ * requires also a valid translation in parents ranges
+ * property.
+ */
+ ranges = <0 0 0x02000000 0 0xdffe0500 0x100
+ 1 0 0x02000000 0 0xdffe0600 0x100
+ 2 0 0x02000000 0 0xdffe0700 0x100>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+
+ /* The first number in the reg property is the
+ * number of the bar
+ */
+ reg = <0 0 0x100>;
+
+ /* This I2C controller has no devices */
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <1 0 0x100>;
+
+ /* This I2C controller has one gpio controller */
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <2 0 0x100>;
+
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
new file mode 100644
index 000000000..015885dd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP I2C controller bindings
+
+maintainers:
+ - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ not:
+ required:
+ - mrvl,i2c-polling
+ then:
+ required:
+ - interrupts
+
+properties:
+ compatible:
+ enum:
+ - mrvl,mmp-twsi
+ - mrvl,pxa-i2c
+ - marvell,armada-3700-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ resets:
+ minItems: 1
+
+ mrvl,i2c-polling:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Disable interrupt of i2c controller. Polling status register of i2c
+ controller instead.
+
+ mrvl,i2c-fast-mode:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Enable fast mode of i2c controller.
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - '#address-cells'
+ - '#size-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ i2c@d4011000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4011000 0x1000>;
+ interrupts = <7>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+ mrvl,i2c-fast-mode;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 000000000..c6668b7c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,92 @@
+Qualcomm Camera Control Interface (CCI) I2C controller
+
+PROPERTIES:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,msm8916-cci"
+ "qcom,msm8996-cci"
+ "qcom,sdm845-cci"
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address CCI I2C controller and length of memory
+ mapped region.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: specifies the CCI I2C interrupt. The format of the
+ specifier is defined by the binding document describing
+ the node's interrupt parent.
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: a list of phandle, should contain an entry for each
+ entries in clock-names.
+
+- clock-names
+ Usage: required
+ Value type: <string>
+ Definition: a list of clock names, must include "cci" clock.
+
+- power-domains
+ Usage: required for "qcom,msm8996-cci"
+ Value type: <prop-encoded-array>
+ Definition:
+
+SUBNODES:
+
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
+sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+
+PROPERTIES:
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: Index of the CCI bus/master
+
+- clock-frequency:
+ Usage: optional
+ Value type: <u32>
+ Definition: Desired I2C bus clock frequency in Hz, defaults to 100
+ kHz if omitted.
+
+Example:
+
+ cci@a0c000 {
+ compatible = "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+ <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "mmss_mmagic_ahb",
+ "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+
+ i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
new file mode 100644
index 000000000..7f254d795
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3xxx I2C controller
+
+description:
+ This driver interfaces with the native I2C controller present in Rockchip
+ RK3xxx SoCs.
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rv1108-i2c
+ - const: rockchip,rk3066-i2c
+ - const: rockchip,rk3188-i2c
+ - const: rockchip,rk3228-i2c
+ - const: rockchip,rk3288-i2c
+ - const: rockchip,rk3399-i2c
+ - items:
+ - enum:
+ - rockchip,rk3036-i2c
+ - rockchip,rk3368-i2c
+ - const: rockchip,rk3288-i2c
+ - items:
+ - enum:
+ - rockchip,px30-i2c
+ - rockchip,rk3308-i2c
+ - rockchip,rk3328-i2c
+ - const: rockchip,rk3399-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description:
+ For older hardware (rk3066, rk3188, rk3228, rk3288)
+ there is one clock that is used both to derive the functional clock
+ for the device and as the bus clock.
+ For newer hardware (rk3399) this clock is used to derive
+ the functional clock
+ - description:
+ For newer hardware (rk3399) this is the bus clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: i2c
+ - const: pclk
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Required on RK3066, RK3188 the phandle of the syscon node for
+ the general register file (GRF)
+ On those SoCs an alias with the correct I2C bus ID
+ (bit offset in the GRF) is also required.
+
+ clock-frequency:
+ default: 100000
+ description:
+ SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+ i2c-scl-rising-time-ns:
+ default: 1000
+ description:
+ Number of nanoseconds the SCL signal takes to rise
+ (t(r) in I2C specification). If not specified this is assumed to be
+ the maximum the specification allows(1000 ns for Standard-mode,
+ 300 ns for Fast-mode) which might cause slightly slower communication.
+
+ i2c-scl-falling-time-ns:
+ default: 300
+ description:
+ Number of nanoseconds the SCL signal takes to fall
+ (t(f) in the I2C specification). If not specified this is assumed to
+ be the maximum the specification allows (300 ns) which might cause
+ slightly slower communication.
+
+ i2c-sda-falling-time-ns:
+ default: 300
+ description:
+ Number of nanoseconds the SDA signal takes to fall
+ (t(f) in the I2C specification). If not specified we will use the SCL
+ value since they are the same in nearly all cases.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3066-i2c
+ - rockchip,rk3188-i2c
+
+then:
+ required:
+ - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3188-cru-common.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0: i2c@2002d000 {
+ compatible = "rockchip,rk3188-i2c";
+ reg = <0x2002d000 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_I2C0>;
+ clock-names = "i2c";
+ rockchip,grf = <&grf>;
+ i2c-scl-falling-time-ns = <100>;
+ i2c-scl-rising-time-ns = <800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
new file mode 100644
index 000000000..66ae46d3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -0,0 +1,58 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+ - compatible: value should be either of the following.
+ (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+ (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+ (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+ inside HDMIPHY block found on several samsung SoCs
+ (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
+ a host to SATA PHY controller on an internal bus.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+
+Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
+ - Samsung GPIO variant (deprecated):
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller. Required in all
+ cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+ lines are permanently wired to the respective clienta
+ - Pinctrl variant (preferred, if available):
+ - pinctrl-0: Pin control group to be used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
+
+Optional properties:
+ - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
+ specified, default value is 0.
+ - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+ specified, the default value in Hz is 100000.
+ - samsung,sysreg-phandle - handle to syscon used to control the system registers
+
+Example:
+
+ i2c@13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <345>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ /* Samsung GPIO variant begins here */
+ gpios = <&gpd1 2 0 /* SDA */
+ &gpd1 3 0 /* SCL */>;
+ /* Samsung GPIO variant ends here */
+ /* Pinctrl variant begins here */
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ /* Pinctrl variant ends here */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sirf.txt b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt
new file mode 100644
index 000000000..2701eefb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-sirf.txt
@@ -0,0 +1,19 @@
+I2C for SiRFprimaII platforms
+
+Required properties :
+- compatible : Must be "sirf,prima2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+ The absence of the property indicates the default frequency 100 kHz.
+
+Examples :
+
+i2c0: i2c@b00e0000 {
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00e0000 0x10000>;
+ interrupts = <24>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
new file mode 100644
index 000000000..60b7cda15
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
@@ -0,0 +1,31 @@
+I2C for Spreadtrum platforms
+
+Required properties:
+- compatible: Should be "sprd,sc9860-i2c".
+- reg: Specify the physical base address of the controller and length
+ of memory mapped region.
+- interrupts: Should contain I2C interrupt.
+- clock-names: Should contain following entries:
+ "i2c" for I2C clock,
+ "source" for I2C source (parent) clock,
+ "enable" for I2C module enable clock.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+- clock-frequency: Constains desired I2C bus clock frequency in Hz.
+- #address-cells: Should be 1 to describe address cells for I2C device address.
+- #size-cells: Should be 0 means no size cell for I2C device address.
+
+Optional properties:
+- Child nodes conforming to I2C bus binding
+
+Examples:
+i2c0: i2c@70500000 {
+ compatible = "sprd,sc9860-i2c";
+ reg = <0 0x70500000 0 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c", "source", "enable";
+ clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
new file mode 100644
index 000000000..4c26fda38
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-st.txt
@@ -0,0 +1,41 @@
+ST SSC binding, for I2C mode operation
+
+Required properties :
+- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- clock-names: Must contain "ssc".
+- clocks: Must contain an entry for each name in clock-names. See the common
+ clock bindings.
+- A pinctrl state named "default" must be defined to set pins in mode of
+ operation for I2C transfer.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used. As only Normal and Fast modes
+ are supported, possible values are 100000 and 400000.
+- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
+ allowed through the deglitch circuit. In units of us.
+- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
+ allowed through the deglitch circuit. In units of us.
+- A pinctrl state named "idle" could be defined to set pins in idle state
+ when I2C instance is not performing a transfer.
+- A pinctrl state named "sleep" could be defined to set pins in sleep state
+ when driver enters in suspend.
+
+
+
+Example :
+
+i2c0: i2c@fed40000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfed40000 0x110>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <5>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stu300.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
new file mode 100644
index 000000000..bd81a4826
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
@@ -0,0 +1,15 @@
+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt b/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
new file mode 100644
index 000000000..72f4a2f0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
@@ -0,0 +1,29 @@
+Socionext SynQuacer I2C
+
+Required properties:
+- compatible : Must be "socionext,synquacer-i2c"
+- reg : Offset and length of the register set for the device
+- interrupts : A single interrupt specifier
+- #address-cells : Must be <1>;
+- #size-cells : Must be <0>;
+- clock-names : Must contain "pclk".
+- clocks : Must contain an entry for each name in clock-names.
+ (See the common clock bindings.)
+
+Optional properties:
+- clock-frequency : Desired I2C bus clock frequency in Hz. As only Normal and
+ Fast modes are supported, possible values are 100000 and
+ 400000.
+
+Example :
+
+ i2c@51210000 {
+ compatible = "socionext,synquacer-i2c";
+ reg = <0x51210000 0x1000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "pclk";
+ clocks = <&clk_i2c>;
+ clock-frequency = <400000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
new file mode 100644
index 000000000..361d31c51
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
@@ -0,0 +1,10 @@
+i2c Controller on ARM Versatile platform:
+
+Required properties:
+- compatible : Must be "arm,versatile-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
new file mode 100644
index 000000000..94a425eaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
@@ -0,0 +1,24 @@
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+ Valid values are 100000 and 400000.
+ Default to 100000 if not specified, or invalid value.
+
+Example :
+
+ i2c_0: i2c@d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
new file mode 100644
index 000000000..f6b2c20cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
@@ -0,0 +1,15 @@
+APM X-Gene SLIMpro Mailbox I2C Driver
+
+An I2C controller accessed over the "SLIMpro" mailbox.
+
+Required properties :
+
+ - compatible : should be "apm,xgene-slimpro-i2c"
+ - mboxes : use the label reference for the mailbox as the first parameter.
+ The second parameter is the channel number.
+
+Example :
+ i2cslimpro {
+ compatible = "apm,xgene-slimpro-i2c";
+ mboxes = <&mailbox 0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
new file mode 100644
index 000000000..f818ef507
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
@@ -0,0 +1,22 @@
+Device tree configuration for the I2C controller on the XLP9xx/5xx SoC
+
+Required properties:
+- compatible : should be "netlogic,xlp980-i2c"
+- reg : bus address start and address range size of device
+- interrupts : interrupt number
+
+Optional properties:
+- clock-frequency : frequency of bus clock in Hz
+ Defaults to 100 KHz when the property is not specified
+
+Example:
+
+i2c0: i2c@113100 {
+ compatible = "netlogic,xlp980-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x113100 0x100>;
+ clock-frequency = <400000>;
+ interrupts = <30>;
+ interrupt-parent = <&pic>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 000000000..cb806d1ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,22 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+ i2c@112000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x00112000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24m>;
+ #address-cells = <1>
+ #size-cells = <0>;
+ clock-frequency = <1600000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
new file mode 100644
index 000000000..df41f72af
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -0,0 +1,144 @@
+Generic device tree bindings for I2C busses
+===========================================
+
+This document describes generic bindings which can be used to describe I2C
+busses and their child devices in a device tree.
+
+Required properties (per bus)
+-----------------------------
+
+- #address-cells - should be <1>. Read more about addresses below.
+- #size-cells - should be <0>.
+- compatible - name of I2C bus controller
+
+For other required properties e.g. to describe register sets,
+clocks, etc. check the binding documentation of the specific driver.
+
+The cells properties above define that an address of children of an I2C bus
+are described by a single value.
+
+Optional properties (per bus)
+-----------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- clock-frequency
+ frequency of bus clock in Hz.
+
+- i2c-bus
+ For I2C adapters that have child nodes that are a mixture of both I2C
+ devices and non-I2C devices, the 'i2c-bus' subnode can be used for
+ populating I2C devices. If the 'i2c-bus' subnode is present, only
+ subnodes of this will be considered as I2C slaves. The properties,
+ '#address-cells' and '#size-cells' must be defined under this subnode
+ if present.
+
+- i2c-scl-falling-time-ns
+ Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+ specification.
+
+- i2c-scl-internal-delay-ns
+ Number of nanoseconds the IP core additionally needs to setup SCL.
+
+- i2c-scl-rising-time-ns
+ Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+ specification.
+
+- i2c-sda-falling-time-ns
+ Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
+ specification.
+
+- i2c-analog-filter
+ Enable analog filter for i2c lines.
+
+- i2c-digital-filter
+ Enable digital filter for i2c lines.
+
+- i2c-digital-filter-width-ns
+ Width of spikes which can be filtered by digital filter
+ (i2c-digital-filter). This width is specified in nanoseconds.
+
+- i2c-analog-filter-cutoff-frequency
+ Frequency that the analog filter (i2c-analog-filter) uses to distinguish
+ which signal to filter. Signal with higher frequency than specified will
+ be filtered out. Only lower frequency will pass (this is applicable to
+ a low-pass analog filter). Typical value should be above the normal
+ i2c bus clock frequency (clock-frequency).
+ Specified in Hz.
+
+- multi-master
+ states that there is another master active on this bus. The OS can use
+ this information to adapt power management to keep the arbitration awake
+ all the time, for example. Can not be combined with 'single-master'.
+
+- pinctrl
+ add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
+ recovery, call it "gpio" or "recovery" (deprecated) state
+
+- scl-gpios
+ specify the gpio related to SCL pin. Used for GPIO bus recovery.
+
+- sda-gpios
+ specify the gpio related to SDA pin. Optional for GPIO bus recovery.
+
+- single-master
+ states that there is no other master active on this bus. The OS can use
+ this information to detect a stalled bus more reliably, for example.
+ Can not be combined with 'multi-master'.
+
+- smbus
+ states that additional SMBus restrictions and features apply to this bus.
+ Examples of features are SMBusHostNotify and SMBusAlert. Examples of
+ restrictions are more reserved addresses and timeout definitions.
+
+Required properties (per child device)
+--------------------------------------
+
+- compatible
+ name of I2C slave device
+
+- reg
+ One or many I2C slave addresses. These are usually a 7 bit addresses.
+ However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
+ used to mark a 10 bit address. It is needed to avoid the ambiguity
+ between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
+ which, in theory, can be on the same bus.
+ Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
+ listen to be devices ourselves.
+
+Optional properties (per child device)
+--------------------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- host-notify
+ device uses SMBus host notify protocol instead of interrupt line.
+
+- interrupts
+ interrupts used by the device.
+
+- interrupt-names
+ "irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+ other names are left to individual drivers.
+
+- reg-names
+ Names of map programmable addresses.
+ It can contain any map needing another address than default one.
+
+- wakeup-source
+ device can be used as a wakeup source.
+
+Binding may contain optional "interrupts" property, describing interrupts
+used by the device. I2C core will assign "irq" interrupt (or the very first
+interrupt if not using interrupt names) as primary interrupt for the slave.
+
+Alternatively, devices supporting SMBus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
+Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
+interrupt for the device. If "wakeup" interrupt name is not present in the
+binding, then primary interrupt will be used as wakeup interrupt.
diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
new file mode 100644
index 000000000..5dc5d2e25
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
@@ -0,0 +1,25 @@
+Device-tree bindings for I2C-based On-Chip Controller hwmon device
+------------------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,p8-occ-hwmon";
+ - reg = <I2C address>; : I2C bus address
+
+Examples:
+
+ i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ < more properties >
+
+ occ-hwmon@1 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x50>;
+ };
+
+ occ-hwmon@2 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x51>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
new file mode 100644
index 000000000..e1e65eb4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs I2C controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ $nodename:
+ pattern: "^i2c@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4770-i2c
+ - ingenic,x1000-i2c
+ - items:
+ - const: ingenic,jz4780-i2c
+ - const: ingenic,jz4770-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000 ]
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-frequency
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c@10054000 {
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10054000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <56>;
+
+ clocks = <&cgu JZ4780_CLK_SMB4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4_data>;
+
+ dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SMB4_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
new file mode 100644
index 000000000..5b5ae402f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV64XXX I2C Controller Device Tree Bindings
+
+maintainers:
+ - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-i2c
+ - items:
+ - const: allwinner,sun7i-a20-i2c
+ - const: allwinner,sun4i-a10-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - items:
+ - const: allwinner,sun8i-a23-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - items:
+ - const: allwinner,sun8i-a83t-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - items:
+ - const: allwinner,sun50i-a64-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - items:
+ - const: allwinner,sun50i-a100-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - items:
+ - const: allwinner,sun50i-h6-i2c
+ - const: allwinner,sun6i-a31-i2c
+
+ - const: marvell,mv64xxx-i2c
+ - const: marvell,mv78230-i2c
+ - const: marvell,mv78230-a0-i2c
+
+ description:
+ Only use "marvell,mv78230-a0-i2c" for a very rare, initial
+ version of the SoC which had broken offload support. Linux
+ auto-detects this and sets it appropriately.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: Reference clock for the I2C bus
+ - description: Bus clock (Only for Armada 7K/8K)
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: core
+ - const: reg
+ description:
+ Mandatory if two clocks are used (only for Armada 7k and 8k).
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun4i-a10-i2c
+ - allwinner,sun6i-a31-i2c
+
+ then:
+ required:
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun6i-a31-i2c
+
+ then:
+ required:
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ };
+
+ - |
+ i2c@11000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x11000 0x100>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ };
+
+ - |
+ i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ clock-names = "core", "reg";
+ clocks = <&core_clock>, <&reg_clock>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
new file mode 100644
index 000000000..566ea861a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.txt
@@ -0,0 +1,42 @@
+Device tree configuration for the Mellanox I2C SMBus on BlueField SoCs
+
+Required Properties:
+
+- compatible : should be "mellanox,i2c-mlxbf1" or "mellanox,i2c-mlxbf2".
+
+- reg : address offset and length of the device registers. The
+ registers consist of the following set of resources:
+ 1) Smbus block registers.
+ 2) Cause master registers.
+ 3) Cause slave registers.
+ 4) Cause coalesce registers (if compatible isn't set
+ to "mellanox,i2c-mlxbf1").
+
+- interrupts : interrupt number.
+
+Optional Properties:
+
+- clock-frequency : bus frequency used to configure timing registers;
+ allowed values are 100000, 400000 and 1000000;
+ those are expressed in Hz. Default is 100000.
+
+Example:
+
+i2c@2804000 {
+ compatible = "mellanox,i2c-mlxbf1";
+ reg = <0x02804000 0x800>,
+ <0x02801200 0x020>,
+ <0x02801260 0x020>;
+ interrupts = <57>;
+ clock-frequency = <100000>;
+};
+
+i2c@2808800 {
+ compatible = "mellanox,i2c-mlxbf2";
+ reg = <0x02808800 0x600>,
+ <0x02808e00 0x020>,
+ <0x02808e20 0x020>,
+ <0x02808e40 0x010>;
+ interrupts = <57>;
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 000000000..e3ef2d36f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+ The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+ both master and slave mode. Each controller can switch between master and slave
+ at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+ RX.
+
+maintainers:
+ - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+ compatible:
+ const: nuvoton,npcm7xx-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: Reference clock for the I2C bus
+
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used.
+ possible values are 100000, 400000 and 1000000.
+ default: 100000
+ enum: [100000, 400000, 1000000]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c0: i2c@80000 {
+ reg = <0x80000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ clock-frequency = <100000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "nuvoton,npcm750-i2c";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
new file mode 100644
index 000000000..ab240e10d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
@@ -0,0 +1,42 @@
+NVIDIA Tegra186 BPMP I2C controller
+
+In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
+devices, such as the I2C controller for the power management I2C bus. Software
+running on other CPUs must perform IPC to the BPMP in order to execute
+transactions on that I2C bus. This binding describes an I2C bus that is
+accessed in such a fashion.
+
+The BPMP I2C node must be located directly inside the main BPMP node. See
+../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
+
+This node represents an I2C controller. See ../i2c/i2c.txt for details of the
+core I2C binding.
+
+Required properties:
+- compatible:
+ Array of strings.
+ One of:
+ - "nvidia,tegra186-bpmp-i2c".
+- #address-cells: Address cells for I2C device address.
+ Single-cell integer.
+ Must be <1>.
+- #size-cells:
+ Single-cell integer.
+ Must be <0>.
+- nvidia,bpmp-bus-id:
+ Single-cell integer.
+ Indicates the I2C bus number this DT node represent, as defined by the
+ BPMP firmware.
+
+Example:
+
+bpmp {
+ ...
+
+ i2c {
+ compatible = "nvidia,tegra186-bpmp-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ nvidia,bpmp-bus-id = <5>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
new file mode 100644
index 000000000..3f2f990c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -0,0 +1,87 @@
+NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
+
+Required properties:
+- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
+ "nvidia,tegra20-i2c". For Tegra30, must be "nvidia,tegra30-i2c".
+ For Tegra114, must be "nvidia,tegra114-i2c". Otherwise, must be
+ "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
+ tegra124, tegra132, or tegra210.
+ Details of compatible are as follows:
+ nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
+ controller. This only support master mode of I2C communication. Register
+ interface/offset and interrupts handling are different than generic I2C
+ controller. Driver of DVC I2C controller is only compatible with
+ "nvidia,tegra20-i2c-dvc".
+ nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
+ master and slave mode of I2C communication. The i2c-tegra driver only
+ support master mode of I2C communication. Driver of I2C controller is
+ only compatible with "nvidia,tegra20-i2c".
+ nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
+ very much similar to Tegra20 I2C controller with additional feature:
+ Continue Transfer Support. This feature helps to implement M_NO_START
+ as per I2C core API transfer flags. Driver of I2C controller is
+ compatible with "nvidia,tegra30-i2c" to enable the continue transfer
+ support. This is also compatible with "nvidia,tegra20-i2c" without
+ continue transfer support.
+ nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
+ very much similar to Tegra30 I2C controller with some hardware
+ modification:
+ - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
+ fast-clk. Tegra114 has only one clock source called as div-clk and
+ hence clock mechanism is changed in I2C controller.
+ - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
+ default and there is no way to disable it. Tegra114 has this
+ interrupt disable by default and SW need to enable explicitly.
+ Due to above changes, Tegra114 I2C driver makes incompatible with
+ previous hardware driver. Hence, tegra114 I2C controller is compatible
+ with "nvidia,tegra114-i2c".
+ nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus
+ and is part of VE power domain and typically used for camera use-cases.
+ This VI I2C controller is mostly compatible with the programming model
+ of the regular I2C controllers with a few exceptions. The I2C registers
+ start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+ apart (rather than 4) and the controller does not support slave mode.
+- reg: Should contain I2C controller registers physical address and length.
+- interrupts: Should contain I2C controller interrupts.
+- address-cells: Address cells for I2C device address.
+- size-cells: Size of the I2C device address.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ Tegra20/Tegra30:
+ - div-clk
+ - fast-clk
+ Tegra114:
+ - div-clk
+ Tegra210:
+ - div-clk
+ - slow (only for nvidia,tegra210-i2c-vi compatible node)
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - i2c
+- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must
+ include venc powergate node as vi i2c is part of VE power domain.
+ tegra210-i2c-vi:
+ - pd_venc
+- dmas: Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+ - rx
+ - tx
+
+Example:
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 12>, <&tegra_car 124>;
+ clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
new file mode 100644
index 000000000..42bfc09c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
@@ -0,0 +1,29 @@
+* NXP PCA9541 I2C bus master selector
+
+Required Properties:
+
+ - compatible: Must be "nxp,pca9541"
+
+ - reg: The I2C address of the device.
+
+ The following required properties are defined externally:
+
+ - I2C arbitration bus node. See i2c-arb.txt in this directory.
+
+
+Example:
+
+ i2c-arbitrator@74 {
+ compatible = "nxp,pca9541";
+ reg = <0x74>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 000000000..dc71754a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,40 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be:
+ * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+ * "qcom,i2c-qup-v2.1.1" for 8974 v1.
+ * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: A list of phandles + clock-specifiers, one for each entry in
+ clock-names.
+ - clock-names: Should contain:
+ * "core" for the core clock
+ * "iface" for the AHB clock
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+ defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9924000 0x1000>;
+ interrupts = <0 96 0>;
+
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ clock-frequency = <355000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
new file mode 100644
index 000000000..96d869ac3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
@@ -0,0 +1,66 @@
+I2C for R-Car platforms
+
+Required properties:
+- compatible:
+ "renesas,i2c-r8a7742" if the device is a part of a R8A7742 SoC.
+ "renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
+ "renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
+ "renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
+ "renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
+ "renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
+ "renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC.
+ "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
+ "renesas,i2c-r8a774e1" if the device is a part of a R8A774E1 SoC.
+ "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
+ "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
+ "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
+ "renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC.
+ "renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC.
+ "renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
+ "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
+ "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
+ "renesas,i2c-r8a7796" if the device is a part of a R8A77960 SoC.
+ "renesas,i2c-r8a77961" if the device is a part of a R8A77961 SoC.
+ "renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
+ "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
+ "renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
+ "renesas,i2c-r8a77990" if the device is a part of a R8A77990 SoC.
+ "renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
+ "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
+ "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
+ device.
+ "renesas,rcar-gen3-i2c" for a generic R-Car Gen3 or RZ/G2 compatible
+ device.
+ "renesas,i2c-rcar" (deprecated)
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first followed
+ by the generic version.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt specifier.
+
+Optional properties:
+- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
+ property indicates the default frequency 100 kHz.
+- clocks: clock specifier.
+- dmas: Must contain a list of two references to DMA specifiers, one for
+ transmission, and one for reception.
+- dma-names: Must contain a list of two DMA names, "tx" and "rx".
+
+- i2c-scl-falling-time-ns: see i2c.txt
+- i2c-scl-internal-delay-ns: see i2c.txt
+- i2c-scl-rising-time-ns: see i2c.txt
+
+Examples :
+
+i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
new file mode 100644
index 000000000..5ed1ea1c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt
@@ -0,0 +1,22 @@
+Device tree configuration for Renesas EMEV2 IIC controller
+
+Required properties:
+- compatible : "renesas,iic-emev2"
+- reg : address start and address range size of device
+- interrupts : specifier for the IIC controller interrupt
+- clocks : phandle to the IP core SCLK
+- clock-names : must be "sclk"
+- #address-cells : should be <1>
+- #size-cells : should be <0>
+
+Example:
+
+ iic0: i2c@e0070000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-emev2";
+ reg = <0xe0070000 0x28>;
+ interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic0_sclk>;
+ clock-names = "sclk";
+ };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
new file mode 100644
index 000000000..93d412832
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
@@ -0,0 +1,72 @@
+Device tree configuration for Renesas IIC (sh_mobile) driver
+
+Required properties:
+- compatible :
+ - "renesas,iic-r8a73a4" (R-Mobile APE6)
+ - "renesas,iic-r8a7740" (R-Mobile A1)
+ - "renesas,iic-r8a7742" (RZ/G1H)
+ - "renesas,iic-r8a7743" (RZ/G1M)
+ - "renesas,iic-r8a7744" (RZ/G1N)
+ - "renesas,iic-r8a7745" (RZ/G1E)
+ - "renesas,iic-r8a774a1" (RZ/G2M)
+ - "renesas,iic-r8a774b1" (RZ/G2N)
+ - "renesas,iic-r8a774c0" (RZ/G2E)
+ - "renesas,iic-r8a774e1" (RZ/G2H)
+ - "renesas,iic-r8a7790" (R-Car H2)
+ - "renesas,iic-r8a7791" (R-Car M2-W)
+ - "renesas,iic-r8a7792" (R-Car V2H)
+ - "renesas,iic-r8a7793" (R-Car M2-N)
+ - "renesas,iic-r8a7794" (R-Car E2)
+ - "renesas,iic-r8a7795" (R-Car H3)
+ - "renesas,iic-r8a7796" (R-Car M3-W)
+ - "renesas,iic-r8a77961" (R-Car M3-W+)
+ - "renesas,iic-r8a77965" (R-Car M3-N)
+ - "renesas,iic-r8a77990" (R-Car E3)
+ - "renesas,iic-sh73a0" (SH-Mobile AG5)
+ - "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
+ compatible device)
+ - "renesas,rcar-gen3-iic" (generic R-Car Gen3 or RZ/G2
+ compatible device)
+ - "renesas,rmobile-iic" (generic device)
+
+ When compatible with a generic R-Car version, nodes
+ must list the SoC-specific version corresponding to
+ the platform first followed by the generic R-Car
+ version.
+
+ When compatible with "renesas,rmobile-iic" it should
+ be the last compatibility string listed.
+
+ The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E)
+ controllers are not considered compatible with
+ "renesas,rcar-gen3-iic" or "renesas,rmobile-iic"
+ due to the absence of automatic transmission registers.
+
+- reg : address start and address range size of device
+- interrupts : interrupt of device
+- clocks : clock for device
+- #address-cells : should be <1>
+- #size-cells : should be <0>
+
+Optional properties:
+- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
+- dmas : Must contain a list of two references to DMA
+ specifiers, one for transmission, and one for
+ reception.
+- dma-names : Must contain a list of two DMA names, "tx" and "rx".
+
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+ iic0: i2c@e6500000 {
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.txt b/Documentation/devicetree/bindings/i2c/renesas,riic.txt
new file mode 100644
index 000000000..e26fe3ad8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.txt
@@ -0,0 +1,32 @@
+Device tree configuration for Renesas RIIC driver
+
+Required properties:
+- compatible :
+ "renesas,riic-r7s72100" if the device is a part of a R7S72100 SoC.
+ "renesas,riic-r7s9210" if the device is a part of a R7S9210 SoC.
+ "renesas,riic-rz" for a generic RZ/A compatible device.
+- reg : address start and address range size of device
+- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI)
+- clock-frequency : frequency of bus clock in Hz
+- #address-cells : should be <1>
+- #size-cells : should be <0>
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+ i2c0: i2c@fcfee000 {
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+ <0 158 IRQ_TYPE_EDGE_RISING>,
+ <0 159 IRQ_TYPE_EDGE_RISING>,
+ <0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
new file mode 100644
index 000000000..4f746bef2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB I2C Controller
+
+maintainers:
+ - Jarkko Nikula <jarkko.nikula@linux.intel.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: mscc,ocelot-i2c
+ then:
+ properties:
+ reg:
+ maxItems: 1
+
+properties:
+ compatible:
+ oneOf:
+ - description: Generic Synopsys DesignWare I2C controller
+ const: snps,designware-i2c
+ - description: Microsemi Ocelot SoCs I2C controller
+ items:
+ - const: mscc,ocelot-i2c
+ - const: snps,designware-i2c
+ - description: Baikal-T1 SoC System I2C controller
+ const: baikal,bt1-sys-i2c
+
+ reg:
+ minItems: 1
+ items:
+ - description: DW APB I2C controller memory mapped registers
+ - description: |
+ ICPU_CFG:TWI_DELAY registers to setup the SDA hold time.
+ This registers are specific to the Ocelot I2C-controller.
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: I2C controller reference clock source
+ - description: APB interface clock source
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: ref
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz
+ enum: [100000, 400000, 1000000, 3400000]
+ default: 400000
+
+ i2c-sda-hold-time-ns:
+ maxItems: 1
+ description: |
+ The property should contain the SDA hold time in nanoseconds. This option
+ is only supported in hardware blocks version 1.11a or newer or on
+ Microsemi SoCs.
+
+ i2c-scl-falling-time-ns:
+ maxItems: 1
+ description: |
+ The property should contain the SCL falling time in nanoseconds.
+ This value is used to compute the tLOW period.
+ default: 300
+
+ i2c-sda-falling-time-ns:
+ maxItems: 1
+ description: |
+ The property should contain the SDA falling time in nanoseconds.
+ This value is used to compute the tHIGH period.
+ default: 300
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - interrupts
+
+examples:
+ - |
+ i2c@f0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0xf0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <11>;
+ clock-frequency = <400000>;
+ };
+ - |
+ i2c@1120000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x1120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <12 1>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <300>;
+ i2c-scl-falling-time-ns = <300>;
+ };
+ - |
+ i2c@2000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x2000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&i2cclk>;
+ interrupts = <0>;
+
+ eeprom@64 {
+ compatible = "atmel,24c02";
+ reg = <0x64>;
+ };
+ };
+ - |
+ i2c@100400 {
+ compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+ reg = <0x100400 0x100>, <0x198 0x8>;
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clocks = <&ahb_clk>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
new file mode 100644
index 000000000..c76131902
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-builtin)
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: socionext,uniphier-fi2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 100000
+ maximum: 400000
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
new file mode 100644
index 000000000..ddde08636
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-less)
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: socionext,uniphier-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 100000
+ maximum: 400000
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
new file mode 100644
index 000000000..d747f4990
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STM32 I2C platform
+
+maintainers:
+ - Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32f7-i2c
+ - st,stm32mp15-i2c
+ then:
+ properties:
+ i2c-scl-rising-time-ns:
+ default: 25
+
+ i2c-scl-falling-time-ns:
+ default: 10
+
+ st,syscfg-fmp:
+ description: Use to set Fast Mode Plus bit within SYSCFG when
+ Fast Mode Plus speed is selected by slave.
+ Format is phandle to syscfg / register offset within
+ syscfg / register bitmask for FMP bit.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ items:
+ minItems: 3
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32f4-i2c
+ then:
+ properties:
+ clock-frequency:
+ enum: [100000, 400000]
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f4-i2c
+ - st,stm32f7-i2c
+ - st,stm32mp15-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: interrupt ID for I2C event
+ - description: interrupt ID for I2C error
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: RX DMA Channel phandle
+ - description: TX DMA Channel phandle
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz. If not specified,
+ the default 100 kHz frequency will be used.
+ For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
+ match, the bus clock frequency can be from 1Hz to 1MHz.
+ default: 100000
+ minimum: 1
+ maximum: 1000000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - resets
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/mfd/stm32f7-rcc.h>
+ #include <dt-bindings/clock/stm32fx-clock.h>
+ //Example 1 (with st,stm32f4-i2c compatible)
+ i2c@40005400 {
+ compatible = "st,stm32f4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc 277>;
+ clocks = <&rcc 0 149>;
+ };
+
+ //Example 2 (with st,stm32f7-i2c compatible)
+ i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40005800 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ };
+
+ //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40013000 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
new file mode 100644
index 000000000..ffb2ed039
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ilinx IIC controller Device Tree Bindings
+
+maintainers:
+ - info@mocean-labs.com
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: xlnx,xps-iic-2.00.a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ clock-name:
+ const: pclk
+ description: |
+ Input clock name.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ axi_iic_0: i2c@40800000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ clocks = <&clkc 15>;
+ interrupts = < 1 2 >;
+ reg = < 0x40800000 0x10000 >;
+
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };