summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
new file mode 100644
index 000000000..4e36d6e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
@@ -0,0 +1,46 @@
+Qualcomm's SPMI PMIC current ADC
+
+QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+A 16 bit ADC is used for current measurements. IADC can measure the current
+through an external resistor (channel 1) or internal (built-in) resistor
+(channel 0). When using an external resistor it is to be described by
+qcom,external-resistor-micro-ohms property.
+
+IADC node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should contain "qcom,spmi-iadc".
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: IADC base address and length in the SPMI PMIC register map
+
+- interrupts:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: End of ADC conversion.
+
+- qcom,external-resistor-micro-ohms:
+ Usage: optional
+ Value type: <u32>
+ Definition: Sense resister value in micro Ohm.
+ If not defined value of 10000 micro Ohms will be used.
+
+Example:
+ /* IADC node */
+ pmic_iadc: iadc@3600 {
+ compatible = "qcom,spmi-iadc";
+ reg = <0x3600 0x100>;
+ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+ qcom,external-resistor-micro-ohms = <10000>;
+ #io-channel-cells = <1>;
+ };
+
+ /* IIO client node */
+ bat {
+ io-channels = <&pmic_iadc 0>;
+ io-channel-names = "iadc";
+ };