diff options
Diffstat (limited to '')
7 files changed, 301 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml new file mode 100644 index 000000000..52341c8ba --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS CCS811 VOC Sensor + +maintainers: + - Narcisa Vasile <narcisaanamaria12@gmail.com> + +description: | + Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality. + +properties: + compatible: + enum: + - ams,ccs811 + reg: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the nRESET line. This is an active low + input to CCS811. + maxItems: 1 + + wakeup-gpios: + description: GPIO connected to the nWAKE line. This is an active low + input to CCS811. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + voc@5b { + compatible = "ams,ccs811"; + reg = <0x5b>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml new file mode 100644 index 000000000..4646deeb6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atlas Scientific OEM + EZO sensors + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + Atlas Scientific OEM + EZO sensors connected via I2C + + Datasheets: + http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf + https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf + https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf + +properties: + compatible: + enum: + - atlas,do-sm + - atlas,ec-sm + - atlas,orp-sm + - atlas,ph-sm + - atlas,rtd-sm + - atlas,co2-ezo + - atlas,o2-ezo + - atlas,hum-ezo + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + atlas@66 { + compatible = "atlas,orp-sm"; + reg = <0x66>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt new file mode 100644 index 000000000..7f3827cfb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt @@ -0,0 +1,11 @@ +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors + +Required properties: +- compatible: must be "bosch,bme680" + +Example: + +bme680@76 { + compatible = "bosch,bme680"; + reg = <0x76>; +}; diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml new file mode 100644 index 000000000..1fe561574 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/plantower,pms7003.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Plantower PMS7003 air pollution sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - plantower,pms1003 + - plantower,pms3003 + - plantower,pms5003 + - plantower,pms6003 + - plantower,pms7003 + - plantower,pmsa003 + + vcc-supply: + description: regulator that provides power to the sensor + + plantower,set-gpios: + description: GPIO connected to the SET line + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RESET line + maxItems: 1 + +required: + - compatible + - vcc-supply + +additionalProperties: false + +examples: + - | + serial { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml new file mode 100644 index 000000000..40d87346f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SCD30 carbon dioxide sensor + +maintainers: + - Tomasz Duszynski <tomasz.duszynski@octakon.com> + +description: | + Air quality sensor capable of measuring co2 concentration, temperature + and relative humidity. + +properties: + compatible: + enum: + - sensirion,scd30 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + + sensirion,sel-gpios: + description: GPIO connected to the SEL line + maxItems: 1 + + sensirion,pwm-gpios: + description: GPIO connected to the PWM line + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + co2-sensor@61 { + compatible = "sensirion,scd30"; + reg = <0x61>; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + serial { + co2-sensor { + compatible = "sensirion,scd30"; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt new file mode 100644 index 000000000..5844ed581 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt @@ -0,0 +1,15 @@ +* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor + +Required properties: + + - compatible: must be one of + "sensirion,sgp30" + "sensirion,sgpc3" + - reg: the I2C address of the sensor + +Example: + +gas@58 { + compatible = "sensirion,sgp30"; + reg = <0x58>; +}; diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml new file mode 100644 index 000000000..a93d1972a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SPS30 particulate matter sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - sensirion,sps30 + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + air-pollution-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; + }; + +... |