summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/resolver
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/resolver')
-rw-r--r--Documentation/devicetree/bindings/iio/resolver/ad2s90.txt31
1 files changed, 31 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
new file mode 100644
index 000000000..477d41fa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
@@ -0,0 +1,31 @@
+Analog Devices AD2S90 Resolver-to-Digital Converter
+
+https://www.analog.com/en/products/ad2s90.html
+
+Required properties:
+ - compatible: should be "adi,ad2s90"
+ - reg: SPI chip select number for the device
+ - spi-max-frequency: set maximum clock frequency, must be 830000
+ - spi-cpol and spi-cpha:
+ Either SPI mode (0,0) or (1,1) must be used, so specify none or both of
+ spi-cpha, spi-cpol.
+
+See for more details:
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Note about max frequency:
+ Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
+ delay is expected between the application of a logic LO to CS and the
+ application of SCLK, as also specified. And since the delay is not
+ implemented in the spi code, to satisfy it, SCLK's period should be at most
+ 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
+ roughly 830000Hz.
+
+Example:
+resolver@0 {
+ compatible = "adi,ad2s90";
+ reg = <0>;
+ spi-max-frequency = <830000>;
+ spi-cpol;
+ spi-cpha;
+};