diff options
Diffstat (limited to '')
206 files changed, 12611 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml new file mode 100644 index 000000000..4fcbfd93e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16240 Programmable Impact Sensor and Recorder driver + +maintainers: + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + ADIS16240 Programmable Impact Sensor and Recorder driver that supports + SPI interface. + https://www.analog.com/en/products/adis16240.html + +properties: + compatible: + enum: + - adi,adis16240 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adis16240"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml new file mode 100644 index 000000000..11d32a288 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports + both I2C & SPI interfaces. + https://www.analog.com/en/products/mems/accelerometers/adxl345.html + https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html + +properties: + compatible: + oneOf: + - items: + - const: adi,adxl346 + - const: adi,adxl345 + - enum: + - adi,adxl345 + - adi,adxl375 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml new file mode 100644 index 000000000..38b59b645 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl372.html + +properties: + compatible: + enum: + - adi,adxl372 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt new file mode 100644 index 000000000..33da4a6fd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -0,0 +1,35 @@ +* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor + +https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf +http://omapworld.com/BMA180_111_1002839.pdf +http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf + +Required properties: + + - compatible : should be one of: + "bosch,bma023" + "bosch,bma150" + "bosch,bma180" + "bosch,bma250" + "bosch,bma254" + "bosch,smb380" + - reg : the I2C address of the sensor + - vdd-supply : regulator phandle connected to the VDD pin + - vddio-supply : regulator phandle connected to the VDDIO pin + +Optional properties: + + - interrupts : interrupt mapping for GPIO IRQ, it should by configured with + flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING + For the bma250 the first interrupt listed must be the one + connected to the INT1 pin, the second (optional) interrupt + listed must be the one connected to the INT2 pin. + +Example: + +bma180@40 { + compatible = "bosch,bma180"; + reg = <0x40>; + interrupt-parent = <&gpio6>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; +}; diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file mode 100644 index 000000000..8723a3362 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA400 triaxial acceleration sensor + +maintainers: + - Dan Robertson <dan@dlrobertson.com> + +description: | + Acceleration and temperature iio sensors with an i2c interface + + Specifications about the sensor can be found at: + https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf + +properties: + compatible: + enum: + - bosch,bma400 + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + vddio-supply: + description: phandle to the regulator that provides power to the sensor's IO + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@14 { + compatible = "bosch,bma400"; + reg = <0x14>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt new file mode 100644 index 000000000..ce105a12c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt @@ -0,0 +1,19 @@ +Device tree bindings for Domintech DMARD05, DMARD06, DMARD07 accelerometers + +Required properties: + - compatible : Should be "domintech,dmard05" + or "domintech,dmard06" + or "domintech,dmard07" + - reg : I2C address of the chip. Should be 0x1c + +Example: + &i2c1 { + /* ... */ + + accelerometer@1c { + compatible = "domintech,dmard06"; + reg = <0x1c>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt new file mode 100644 index 000000000..ce950e162 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt @@ -0,0 +1,24 @@ +Kionix KXCJK-1013 Accelerometer device tree bindings + +Required properties: + +- compatible: Must be one of: + "kionix,kxcjk1013" + "kionix,kxcj91008" + "kionix,kxtj21009" + "kionix,kxtf9" + - reg: i2c slave address + +Optional properties: + + - mount-matrix: an optional 3x3 mounting rotation matrix + +Example: + +kxtf9@f { + compatible = "kionix,kxtf9"; + reg = <0x0F>; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; +}; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml new file mode 100644 index 000000000..390b87242 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kionix KXSD9 Accelerometer + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + 3 axis 12 bit accelerometer with +-8G range on all axes. Also has a + 12 bit auxiliary ADC channel. Interface is either SPI or I2C. + +properties: + compatible: + const: kionix,kxsd9 + + reg: + maxItems: 1 + + vdd-supply: true + iovdd-supply: true + + interrupts: + maxItems: 1 + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accel@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + iovdd-supply = <&iovdd>; + vdd-supply = <&vdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + mount-matrix = "-0.984807753012208", "0", "-0.173648177666930", + "0", "-1", "0", + "-0.173648177666930", "0", "0.984807753012208"; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accel@0 { + compatible = "kionix,kxsd9"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt new file mode 100644 index 000000000..764e28ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -0,0 +1,119 @@ +LIS302 accelerometer devicetree bindings + +This device is matched via its bus drivers, and has a number of properties +that apply in on the generic device (independent from the bus). + + +Required properties for the SPI bindings: + - compatible: should be set to "st,lis3lv02d-spi" + - reg: the chipselect index + - spi-max-frequency: maximal bus speed, should be set to 1000000 unless + constrained by external circuitry + - interrupts: the interrupt generated by the device + +Required properties for the I2C bindings: + - compatible: should be set to "st,lis3lv02d" + - reg: i2c slave address + - Vdd-supply: The input supply for Vdd + - Vdd_IO-supply: The input supply for Vdd_IO + + +Optional properties for all bus drivers: + + - st,click-single-{x,y,z}: if present, tells the device to issue an + interrupt on single click events on the + x/y/z axis. + - st,click-double-{x,y,z}: if present, tells the device to issue an + interrupt on double click events on the + x/y/z axis. + - st,click-thresh-{x,y,z}: set the x/y/z axis threshold + - st,click-click-time-limit: click time limit, from 0 to 127.5msec + with step of 0.5 msec + - st,click-latency: click latency, from 0 to 255 msec with + step of 1 msec. + - st,click-window: click window, from 0 to 255 msec with + step of 1 msec. + - st,irq{1,2}-disable: disable IRQ 1/2 + - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition + - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-click: raise IRQ 1/2 on click condition + - st,irq-open-drain: consider IRQ lines open-drain + - st,irq-active-low: make IRQ lines active low + - st,wu-duration-1: duration register for Free-Fall/Wake-Up + interrupt 1 + - st,wu-duration-2: duration register for Free-Fall/Wake-Up + interrupt 2 + - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit + - st,wakeup-threshold: set wakeup threshold + - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit for second wakeup + engine. + - st,wakeup2-threshold: set wakeup threshold for second wakeup + engine. + - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of + highpass cut-off frequency + - st,hipass{1,2}-disable: disable highpass 1/2. + - st,default-rate=: set the default rate + - st,axis-{x,y,z}=: set the axis to map to the three coordinates. + Negative values can be used for inverted axis. + - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis + (used by self-test) + + +Example for a SPI device node: + + accelerometer@0 { + compatible = "st,lis302dl-spi"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 0>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; + +Example for a I2C device node: + + lis331dlh: accelerometer@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt new file mode 100644 index 000000000..e13239437 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -0,0 +1,35 @@ +Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q +triaxial accelerometer + +Required properties: + + - compatible: should contain one of + * "fsl,mma8451" + * "fsl,mma8452" + * "fsl,mma8453" + * "fsl,mma8652" + * "fsl,mma8653" + * "fsl,fxls8471" + + - reg: the I2C address of the chip + +Optional properties: + + - interrupts: interrupt mapping for GPIO IRQ + + - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's + interrupt line in use. + + - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer. + + - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer. + +Example: + + mma8453fc@1d { + compatible = "fsl,mma8453"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <5 0>; + interrupt-names = "INT2"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adc.txt b/Documentation/devicetree/bindings/iio/adc/adc.txt new file mode 100644 index 000000000..5bbaa330a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adc.txt @@ -0,0 +1,23 @@ +Common ADCs properties + +Optional properties for child nodes: +- bipolar : Boolean, if set the channel is used in bipolar mode. +- diff-channels : Differential channels muxed for this ADC. The first value + specifies the positive input pin, the second value the negative + input pin. + +Example: + adc@0 { + compatible = "some,adc"; + ... + channel@0 { + bipolar; + diff-channels = <0 1>; + ... + }; + + channel@1 { + diff-channels = <2 3>; + ... + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml new file mode 100644 index 000000000..31ffa275f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7091R5 4-Channel 12-Bit ADC + +maintainers: + - Beniamin Bia <beniamin.bia@analog.com> + +description: | + Analog Devices AD7091R5 4-Channel 12-Bit ADC + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf + +properties: + compatible: + enum: + - adi,ad7091r5 + + reg: + maxItems: 1 + + vref-supply: + description: + Phandle to the vref power supply + + interrupts: + maxItems: 1 + + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@2f { + compatible = "adi,ad7091r5"; + reg = <0x2f>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml new file mode 100644 index 000000000..f1c574c89 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7124 ADC device driver + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Bindings for the Analog Devices AD7124 ADC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf + +properties: + compatible: + enum: + - adi,ad7124-4 + - adi,ad7124-8 + + reg: + description: SPI chip select number for the device + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + description: IRQ line for the ADC + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + refin1-supply: + description: refin1 supply can be used as reference for conversion. + + refin2-supply: + description: refin2 supply can be used as reference for conversion. + + avdd-supply: + description: avdd supply can be used as reference for conversion. + + spi-max-frequency: true + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +patternProperties: + "^channel@([0-9]|1[0-5])$": + type: object + description: | + Represents the external channels which are connected to the ADC. + See Documentation/devicetree/bindings/iio/adc/adc.txt. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels on ad7124-4 + and 16 channels on ad7124-8, numbered from 0 to 15. + items: + minimum: 0 + maximum: 15 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] + + diff-channels: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + items: + minimum: 0 + maximum: 15 + + bipolar: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + type: boolean + + adi,buffered-positive: + description: Enable buffered mode for positive input. + type: boolean + + adi,buffered-negative: + description: Enable buffered mode for negative input. + type: boolean + + required: + - reg + - diff-channels + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + adi,buffered-positive; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + adi,buffered-positive; + adi,buffered-negative; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml new file mode 100644 index 000000000..e0cc3b2e8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7192 ADC device driver + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Bindings for the Analog Devices AD7192 ADC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf + +properties: + compatible: + enum: + - adi,ad7190 + - adi,ad7192 + - adi,ad7193 + - adi,ad7195 + + reg: + maxItems: 1 + + spi-cpol: true + + spi-cpha: true + + spi-max-frequency: true + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 1 + + dvdd-supply: + description: DVdd voltage supply + + avdd-supply: + description: AVdd voltage supply + + adi,rejection-60-Hz-enable: + description: | + This bit enables a notch at 60 Hz when the first notch of the sinc + filter is at 50 Hz. When REJ60 is set, a filter notch is placed at + 60 Hz when the sinc filter first notch is at 50 Hz. This allows + simultaneous 50 Hz/ 60 Hz rejection. + type: boolean + + adi,refin2-pins-enable: + description: | + External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins. + type: boolean + + adi,buffer-enable: + description: | + Enables the buffer on the analog inputs. If cleared, the analog inputs + are unbuffered, lowering the power consumption of the device. If this + bit is set, the analog inputs are buffered, allowing the user to place + source impedances on the front end without contributing gain errors to + the system. + type: boolean + + adi,burnout-currents-enable: + description: | + When this bit is set to 1, the 500 nA current sources in the signal + path are enabled. When BURN = 0, the burnout currents are disabled. + The burnout currents can be enabled only when the buffer is active + and when chop is disabled. + type: boolean + + bipolar: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - dvdd-supply + - avdd-supply + - spi-cpol + - spi-cpha + +additionalProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7192"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + clocks = <&ad7192_mclk>; + clock-names = "mclk"; + interrupts = <25 0x2>; + interrupt-parent = <&gpio>; + dvdd-supply = <&dvdd>; + avdd-supply = <&avdd>; + + adi,refin2-pins-enable; + adi,rejection-60-Hz-enable; + adi,buffer-enable; + adi,burnout-currents-enable; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml new file mode 100644 index 000000000..930f9e390 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7291.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor + +maintainers: + - Michael Auchter <michael.auchter@ni.com> + +description: | + Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf + +properties: + compatible: + enum: + - adi,ad7291 + + reg: + maxItems: 1 + + vref-supply: + description: | + The regulator supply for ADC reference voltage. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ad7291: adc@0 { + compatible = "adi,ad7291"; + reg = <0>; + vref-supply = <&adc_vref>; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml new file mode 100644 index 000000000..108d202b2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7292 10-Bit Monitor and Control System + +maintainers: + - Marcelo Schmitt <marcelo.schmitt1@gmail.com> + +description: | + Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs, + Temperature Sensor, and GPIOs + + Specifications about the part can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf + +properties: + compatible: + enum: + - adi,ad7292 + + reg: + maxItems: 1 + + vref-supply: + description: | + The regulator supply for ADC and DAC reference voltage. + + spi-cpha: true + + spi-max-frequency: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - spi-cpha + +patternProperties: + "^channel@[0-7]$": + type: object + description: | + Represents the external channels which are connected to the ADC. + See Documentation/devicetree/bindings/iio/adc/adc.txt. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels numbered from 0 to 7. + items: + - minimum: 0 + maximum: 7 + + diff-channels: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + maxItems: 1 + + required: + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad7292: adc@0 { + compatible = "adi,ad7292"; + reg = <0>; + spi-max-frequency = <25000000>; + vref-supply = <&adc_vref>; + spi-cpha; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml new file mode 100644 index 000000000..73775174c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7606 Simultaneous Sampling ADC + +maintainers: + - Beniamin Bia <beniamin.bia@analog.com> + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices AD7606 Simultaneous Sampling ADC + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf + +properties: + compatible: + enum: + - adi,ad7605-4 + - adi,ad7606-8 + - adi,ad7606-6 + - adi,ad7606-4 + - adi,ad7606b + - adi,ad7616 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: true + + avcc-supply: true + + interrupts: + maxItems: 1 + + adi,conversion-start-gpios: + description: + Must be the device tree identifier of the CONVST pin. + This logic input is used to initiate conversions on the analog + input channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + maxItems: 1 + + reset-gpios: + description: + Must be the device tree identifier of the RESET pin. If specified, + it will be asserted during driver probe. As the line is active high, + it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + standby-gpios: + description: + Must be the device tree identifier of the STBY pin. This pin is used + to place the AD7606 into one of two power-down modes, Standby mode or + Shutdown mode. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,first-data-gpios: + description: + Must be the device tree identifier of the FRSTDATA pin. + The FRSTDATA output indicates when the first channel, V1, is + being read back on either the parallel, byte or serial interface. + As the line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,range-gpios: + description: + Must be the device tree identifier of the RANGE pin. The polarity on + this pin determines the input range of the analog input channels. If + this pin is tied to a logic high, the analog input range is ±10V for + all channels. If this pin is tied to a logic low, the analog input range + is ±5V for all channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,oversampling-ratio-gpios: + description: + Must be the device tree identifier of the over-sampling + mode pins. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + maxItems: 3 + + adi,sw-mode: + description: + Software mode of operation, so far available only for ad7616 and ad7606b. + It is enabled when all three oversampling mode pins are connected to + high level. The device is configured by the corresponding registers. If the + adi,oversampling-ratio-gpios property is defined, then the driver will set the + oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired + to VDD. + type: boolean + +required: + - compatible + - reg + - spi-cpha + - avcc-supply + - interrupts + - adi,conversion-start-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7606-8"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + + avcc-supply = <&adc_vref>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>, + <&gpio 26 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + adi,sw-mode; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml new file mode 100644 index 000000000..8f32800fe --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7768-1 ADC device driver + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Datasheet at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf + +properties: + compatible: + const: adi,ad7768-1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + interrupts: + maxItems: 1 + + vref-supply: + description: + ADC reference voltage supply + + adi,sync-in-gpios: + description: + Enables synchronization of multiple devices that require simultaneous + sampling. A pulse is always required if the configuration is changed + in any way, for example if the filter decimation rate changes. + As the line is active low, it should be marked GPIO_ACTIVE_LOW. + + reset-gpios: + maxItems: 1 + + spi-max-frequency: true + + spi-cpol: true + + spi-cpha: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + - spi-cpol + - spi-cpha + - adi,sync-in-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7768-1"; + reg = <0>; + spi-max-frequency = <2000000>; + spi-cpol; + spi-cpha; + vref-supply = <&adc_vref>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + clocks = <&ad7768_mclk>; + clock-names = "mclk"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml new file mode 100644 index 000000000..a67ba67da --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The ad7780 is a sigma-delta analog to digital converter. This driver provides + reading voltage values and status bits from both the ad778x and ad717x series. + Its interface also allows writing on the FILTER and GAIN GPIO pins on the + ad778x. + + Specifications on the converters can be found at: + AD7170: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf + AD7171: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf + AD7780: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf + AD7781: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf + +properties: + compatible: + enum: + - adi,ad7170 + - adi,ad7171 + - adi,ad7780 + - adi,ad7781 + + reg: + maxItems: 1 + + avdd-supply: + description: + The regulator supply for the ADC reference voltage. + + powerdown-gpios: + description: + Must be the device tree identifier of the PDRST pin. If + specified, it will be asserted during driver probe. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,gain-gpios: + description: + Must be the device tree identifier of the GAIN pin. Only for + the ad778x chips. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,filter-gpios: + description: + Must be the device tree identifier of the FILTER pin. Only + for the ad778x chips. If specified, it will be asserted + during driver probe. As the line is active low, it should be + marked GPIO_ACTIVE_LOW. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7780"; + reg = <0>; + + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml new file mode 100644 index 000000000..e82194974 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7923.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Patrick Vasseur <patrick.vasseur@c-s.fr> + +description: | + Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, + AD7918, AD7928 8 Channels ADCs. + + Specifications about the part can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7904_7914_7924.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf + +properties: + compatible: + enum: + - adi,ad7904 + - adi,ad7914 + - adi,ad7923 + - adi,ad7924 + - adi,ad7908 + - adi,ad7918 + - adi,ad7928 + + reg: + maxItems: 1 + + refin-supply: + description: | + The regulator supply for ADC reference voltage. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad7928: adc@0 { + compatible = "adi,ad7928"; + reg = <0>; + spi-max-frequency = <25000000>; + refin-supply = <&adc_vref>; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml new file mode 100644 index 000000000..9b56bd4d5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7949.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7949/AD7682/AD7689 analog to digital converters + +maintainers: + - Charles-Antoine Couret <charles-antoine.couret@essensium.com> + +description: | + Specifications on the converters can be found at: + AD7949: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf + AD7682/AD7698: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf + +properties: + compatible: + enum: + - adi,ad7682 + - adi,ad7689 + - adi,ad7949 + + reg: + maxItems: 1 + + vref-supply: + description: + ADC reference voltage supply + + spi-max-frequency: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7949"; + reg = <0>; + vref-supply = <&vdd_supply>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml new file mode 100644 index 000000000..b5aed40d8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD9467 and similar High-Speed ADCs + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + The AD9467 and the parts similar with it, are high-speed analog-to-digital + converters (ADCs), operating in the range of 100 to 500 mega samples + per second (MSPS). Some parts support higher MSPS and some + lower MSPS, suitable for the intended application of each part. + + All the parts support the register map described by Application Note AN-877 + https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf + + https://www.analog.com/media/en/technical-documentation/data-sheets/AD9265.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf + +properties: + compatible: + enum: + - adi,ad9265 + - adi,ad9434 + - adi,ad9467 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: adc-clk + + powerdown-gpios: + description: + Pin that controls the powerdown mode of the device. + maxItems: 1 + + reset-gpios: + description: + Reset pin for the device. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad9467"; + reg = <0>; + clocks = <&adc_clk>; + clock-names = "adc-clk"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml new file mode 100644 index 000000000..0924b2b49 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI ADC IP core + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + Analog Devices Generic AXI ADC IP core for interfacing an ADC device + with a high speed serial (JESD204B/C) or source synchronous parallel + interface (LVDS/CMOS). + Usually, some other interface type (i.e SPI) is used as a control + interface for the actual ADC, while this IP core will interface + to the data-lines of the ADC and handle the streaming of data into + memory via DMA. + + https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + +properties: + compatible: + enum: + - adi,axi-adc-10.0.a + + reg: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx + + adi,adc-dev: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A reference to a the actual ADC to which this FPGA ADC interfaces to. + +required: + - compatible + - dmas + - reg + - adi,adc-dev + +additionalProperties: false + +examples: + - | + axi-adc@44a00000 { + compatible = "adi,axi-adc-10.0.a"; + reg = <0x44a00000 0x10000>; + dmas = <&rx_dma 0>; + dma-names = "rx"; + + adi,adc-dev = <&spi_adc>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml new file mode 100644 index 000000000..15c514b83 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A33 Thermal Sensor Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#io-channel-cells": + const: 0 + + "#thermal-sensor-cells": + const: 0 + + compatible: + const: allwinner,sun8i-a33-ths + + reg: + maxItems: 1 + +required: + - "#io-channel-cells" + - "#thermal-sensor-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + ths: ths@1c25000 { + compatible = "allwinner,sun8i-a33-ths"; + reg = <0x01c25000 0x100>; + #thermal-sensor-cells = <0>; + #io-channel-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml new file mode 100644 index 000000000..3be895558 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/amlogic,meson-saradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson SAR (Successive Approximation Register) A/D converter + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: + Binding covers a range of ADCs found on Amlogic Meson SoCs. + +properties: + compatible: + oneOf: + - const: amlogic,meson-saradc + - items: + - enum: + - amlogic,meson8-saradc + - amlogic,meson8b-saradc + - amlogic,meson8m2-saradc + - amlogic,meson-gxbb-saradc + - amlogic,meson-gxl-saradc + - amlogic,meson-gxm-saradc + - amlogic,meson-axg-saradc + - amlogic,meson-g12a-saradc + - const: amlogic,meson-saradc + + reg: + maxItems: 1 + + interrupts: + description: Interrupt indicates end of sampling. + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: clkin + - const: core + - const: adc_clk + - const: adc_sel + + vref-supply: true + + "#io-channel-cells": + const: 1 + + amlogic,hhi-sysctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Syscon which contains the 5th bit of the TSC (temperature sensor + coefficient) on Meson8b and Meson8m2 (which used to calibrate the + temperature sensor) + + nvmem-cells: + description: phandle to the temperature_calib eFuse cells + maxItems: 1 + + nvmem-cell-names: + const: temperature_calib + +allOf: + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-saradc + - amlogic,meson8b-saradc + - amlogic,meson8m2-saradc + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + else: + properties: + nvmem-cells: false + mvmem-cel-names: false + clocks: + minItems: 4 + clock-names: + minItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8b-saradc + - amlogic,meson8m2-saradc + then: + properties: + amlogic,hhi-sysctrl: true + else: + properties: + amlogic,hhi-sysctrl: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/gxbb-clkc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + adc@8680 { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x8680 0x0 0x34>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + }; + adc@9680 { + compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; + #io-channel-cells = <1>; + reg = <0x0 0x9680 0x0 0x34>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_SAR_ADC>; + clock-names = "clkin", "core"; + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "temperature_calib"; + amlogic,hhi-sysctrl = <&hhi>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml new file mode 100644 index 000000000..7f534a933 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Joel Stanley <joel@jms.id.au> + +description: + This device is a 10-bit converter for 16 voltage channels. All inputs are + single ended. + +properties: + compatible: + enum: + - aspeed,ast2400-adc + - aspeed,ast2500-adc + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + adc@1e6e9000 { + compatible = "aspeed,ast2400-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt new file mode 100644 index 000000000..07c59f301 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -0,0 +1,50 @@ +* AT91 SAMA5D2 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc". + - reg: Should contain ADC registers location and length. + - interrupts: Should contain the IRQ line for the ADC. + - clocks: phandle to device clock. + - clock-names: Must be "adc_clk". + - vref-supply: Supply used as reference for conversions. + - vddana-supply: Supply for the adc device. + - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC. + - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC. + - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC. + - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware + trigger pin. When the specific edge type is detected, the conversion will + start. Possible values are rising, falling, or both. + This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING , + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH + +Optional properties: + - dmas: Phandle to dma channel for the ADC. + - dma-names: Must be "rx" when dmas property is being used. + See ../../dma/dma.txt for details. + - #io-channel-cells: in case consumer drivers are attached, this must be 1. + See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details. + +Properties for consumer drivers: + - Consumer drivers can be connected to this producer device, as specified + in <Documentation/devicetree/bindings/iio/iio-bindings.txt> + - Channels exposed are specified in: + <dt-bindings/iio/adc/at91-sama5d2_adc.txt> + +Example: + +adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; + dma-names = "rx"; + #io-channel-cells = <1>; +} diff --git a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt new file mode 100644 index 000000000..f65b04fb7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt @@ -0,0 +1,83 @@ +* AT91's Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,<chip>-adc" + <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" + - reg: Should contain ADC registers location and length + - interrupts: Should contain the IRQ line for the ADC + - clock-names: tuple listing input clock names. + Required elements: "adc_clk", "adc_op_clk". + - clocks: phandles to input clocks. + - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this + device + - atmel,adc-startup-time: Startup Time of the ADC in microseconds as + defined in the datasheet + - atmel,adc-vref: Reference voltage in millivolts for the conversions + - atmel,adc-res: List of resolutions in bits supported by the ADC. List size + must be two at least. + - atmel,adc-res-names: Contains one identifier string for each resolution + in atmel,adc-res property. "lowres" and "highres" + identifiers are required. + +Optional properties: + - atmel,adc-use-external-triggers: Boolean to enable the external triggers + - atmel,adc-use-res: String corresponding to an identifier from + atmel,adc-res-names property. If not specified, the highest + resolution will be used. + - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion + - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds + - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this + value is set, then the adc driver will enable touchscreen + support. + NOTE: when adc touchscreen is enabled, the adc hardware trigger will be + disabled. Since touchscreen will occupy the trigger register. + - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It + makes touch detection more precise. + +Optional trigger Nodes: + - Required properties: + * trigger-name: Name of the trigger exposed to the user + * trigger-value: Value to put in the Trigger register + to activate this trigger + - Optional properties: + * trigger-external: Is the trigger an external trigger? + +Examples: +adc0: adc@fffb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9260-adc"; + reg = <0xfffb0000 0x100>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-channels-used = <0xff>; + atmel,adc-startup-time = <40>; + atmel,adc-use-external-triggers; + atmel,adc-vref = <3300>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "lowres"; + + trigger0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + + trigger2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + + trigger3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml new file mode 100644 index 000000000..77605f179 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AVIA HX711 ADC chip for weight cells + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Bit-banging driver using two GPIOs: + - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval + and up to 3 cycles for selection of the input channel and gain for the + next measurement + - dout-gpio is the sensor data the sensor responds to the clock + + Specifications about the driver can be found at: + http://www.aviaic.com/ENProducts.aspx + +properties: + compatible: + enum: + - avia,hx711 + + sck-gpios: + description: + Definition of the GPIO for the clock (output). In the datasheet it is + named PD_SCK + maxItems: 1 + + dout-gpios: + description: + Definition of the GPIO for the data-out sent by the sensor in + response to the clock (input). + See Documentation/devicetree/bindings/gpio/gpio.txt for information + on how to specify a consumer gpio. + maxItems: 1 + + avdd-supply: + description: + Definition of the regulator used as analog supply + + clock-frequency: + minimum: 20000 + maximum: 2500000 + default: 400000 + +required: + - compatible + - sck-gpios + - dout-gpios + - avdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + weight { + compatible = "avia,hx711"; + sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + avdd-supply = <&avdd>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt new file mode 100644 index 000000000..7a6313913 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt @@ -0,0 +1,48 @@ +* X-Powers AXP ADC bindings + +Required properties: + - compatible: should be one of: + - "x-powers,axp209-adc", + - "x-powers,axp221-adc", + - "x-powers,axp813-adc", + - #io-channel-cells: should be 1, + +Example: + +&axp22x { + adc { + compatible = "x-powers,axp221-adc"; + #io-channel-cells = <1>; + }; +}; + +ADC channels and their indexes per variant: + +AXP209 +------ + 0 | acin_v + 1 | acin_i + 2 | vbus_v + 3 | vbus_i + 4 | pmic_temp + 5 | gpio0_v + 6 | gpio1_v + 7 | ipsout_v + 8 | batt_v + 9 | batt_chrg_i +10 | batt_dischrg_i + +AXP22x +------ + 0 | pmic_temp + 1 | batt_v + 2 | batt_chrg_i + 3 | batt_dischrg_i + +AXP813 +------ + 0 | pmic_temp + 1 | gpio0_v + 2 | batt_v + 3 | batt_chrg_i + 4 | batt_dischrg_i diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt new file mode 100644 index 000000000..7b1b1e408 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt @@ -0,0 +1,40 @@ +* Broadcom's IPROC Static ADC controller + +Broadcom iProc ADC controller has 8 channels 10bit ADC. +Allows user to convert analog input voltage values to digital. + +Required properties: + +- compatible: Must be "brcm,iproc-static-adc" + +- adc-syscon: Handler of syscon node defining physical base address of the + controller and length of memory mapped region. + +- #io-channel-cells = <1>; As ADC has multiple outputs + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + +- io-channel-ranges: + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + +- clocks: Clock used for this block. + +- clock-names: Clock name should be given as tsc_clk. + +- interrupts: interrupt line number. + +For example: + + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon","syscon"; + reg = <0x180a6000 0xc30>; + }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + adc-syscon = <&ts_adc_syscon>; + #io-channel-cells = <1>; + io-channel-ranges; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml new file mode 100644 index 000000000..4e695b97d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cosmic Circuits CC-10001 ADC + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: + Cosmic Circuits 10001 10-bit ADC device. + +properties: + compatible: + const: cosmic,10001-adc + + reg: + maxItems: 1 + + adc-reserved-channels: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask of reserved channels, i.e. channels that cannot be + used by the OS. + + clocks: + maxItems: 1 + + clock-names: + const: adc + + vref-supply: true + + "#io-channel-cells": + const: 1 + + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + +additionalProperties: false + +examples: + - | + adc@18101600 { + compatible = "cosmic,10001-adc"; + reg = <0x18101600 0x24>; + adc-reserved-channels = <0x2>; + clocks = <&adc_clk>; + clock-names = "adc"; + vref-supply = <®_1v8>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml new file mode 100644 index 000000000..cc29a2f21 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/dlg,da9150-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9150 IIO GPADC + +maintainers: + - Adam Thomson <Adam.Thomson.Opensource@diasemi.com> + +description: + This patch adds support for general purpose ADC within the + DA9150 Charger & Fuel-Gauge IC. + +properties: + compatible: + const: dlg,da9150-gpadc + + "#io-channel-cells": + const: 1 + +required: + - compatible + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + adc { + compatible = "dlg,da9150-gpadc"; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt new file mode 100644 index 000000000..27544bdd4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt @@ -0,0 +1,54 @@ +Bindings for ADC envelope detector using a DAC and a comparator + +The DAC is used to find the peak level of an alternating voltage input +signal by a binary search using the output of a comparator wired to +an interrupt pin. Like so: + _ + | \ + input +------>-------|+ \ + | \ + .-------. | }---. + | | | / | + | dac|-->--|- / | + | | |_/ | + | | | + | | | + | irq|------<-------' + | | + '-------' + +Required properties: +- compatible: Should be "axentia,tse850-envelope-detector" +- io-channels: Channel node of the dac to be used for comparator input. +- io-channel-names: Should be "dac". +- interrupt specification for one client interrupt, + see ../../interrupt-controller/interrupts.txt for details. +- interrupt-names: Should be "comp". + +Example: + + &i2c { + dpot: mcp4651-104@28 { + compatible = "microchip,mcp4651-104"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + }; + + dac: dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + #io-channel-cells = <1>; + }; + + envelope-detector { + compatible = "axentia,tse850-envelope-detector"; + io-channels = <&dac 0>; + io-channel-names = "dac"; + + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "comp"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml new file mode 100644 index 000000000..e9103497e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale ADC GCQ device + +description: + This is a generic conversion queue device that can convert any of the + analog inputs using the ADC unit of the i.MX25. + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +properties: + compatible: + const: fsl,imx25-gcq + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-ext-supply: + description: + The regulator supplying the ADC reference voltage. + Required when at least one subnode uses the this reference. + + vref-xp-supply: + description: + The regulator supplying the ADC reference voltage on pin XP. + Required when at least one subnode uses this reference. + + vref-yp-supply: + description: + The regulator supplying the ADC reference voltage on pin YP. + Required when at least one subnode uses this reference. + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +patternProperties: + "[a-z][a-z0-9]+@[0-9a-f]+$": + type: object + description: + Child nodes used to define the reference voltages used for each channel + + properties: + reg: + description: | + Number of the analog input. + 0: xp + 1: yp + 2: xn + 3: yn + 4: wiper + 5: inaux0 + 6: inaux1 + 7: inaux2 + items: + - minimum: 0 + maximum: 7 + + fsl,adc-refp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the positive reference input as defined in + <dt-bindings/iio/adc/fsl-imx25-gcq.h> + 0: YP voltage reference + 1: XP voltage reference + 2: External voltage reference + 3: Internal voltage reference (default) + minimum: 0 + maximum: 3 + + fsl,adc-refn: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the negative reference input as defined in + <dt-bindings/iio/adc/fsl-imx25-gcq.h> + 0: XN ground reference + 1: YN ground reference + 2: Internal ground reference + 3: External ground reference (default) + minimum: 0 + maximum: 3 + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/fsl-imx25-gcq.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + + inaux@5 { + reg = <5>; + fsl,adc-refp = <MX25_ADC_REFP_INT>; + fsl,adc-refn = <MX25_ADC_REFN_NGND>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml new file mode 100644 index 000000000..afc5cc48a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale ADC found on the imx7d SoC + +maintainers: + - Haibo Chen <haibo.chen@nxp.com> + +properties: + compatible: + const: fsl,imx7d-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: adc + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx7d-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + vref-supply = <®_vcc_3v3_mcu>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml new file mode 100644 index 000000000..1ca571056 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC found on Freescale vf610 and similar SoCs + +maintainers: + - Fugang Duan <fugang.duan@nxp.com> + +description: + ADCs found on vf610/i.MX6slx and upward SoCs from Freescale. + +properties: + compatible: + const: fsl,vf610-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: ADC source clock (ipg clock) + maxItems: 1 + + clock-names: + const: adc + + vref-supply: + description: ADC reference voltage supply. + + fsl,adck-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + description: | + Maximum frequencies from datasheet operating requirements. + Three values necessary to cover the 3 conversion modes. + * Frequency in normal mode (ADLPC=0, ADHSC=0) + * Frequency in high-speed mode (ADLPC=0, ADHSC=1) + * Frequency in low-power mode (ADLPC=1, ADHSC=0) + + min-sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum sampling time in nanoseconds. This value has + to be chosen according to the conversion mode and the connected analog + source resistance (R_as) and capacitance (C_as). Refer the datasheet's + operating requirements. A safe default across a wide range of R_as and + C_as as well as conversion modes is 1000ns. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + interrupts = <0 53 0x04>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; + vref-supply = <®_vcc_3v3_mcu>; + min-sample-time = <10000>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml new file mode 100644 index 000000000..52490cbb0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Holt Integrated Circuits HI-8435 SPI threshold detector + +maintainers: + - Vladimir Barinov <vladimir.barinov@cogentembedded.com> + +description: | + Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do + +properties: + compatible: + const: holt,hi8435 + + reg: + maxItems: 1 + + gpios: + description: + GPIO used for controlling the reset pin + maxItems: 1 + + spi-max-frequency: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + threshold-detector@0 { + compatible = "holt,hi8435"; + reg = <0>; + gpios = <&gpio6 1 0>; + spi-max-frequency = <1000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml new file mode 100644 index 000000000..9f414dbda --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Ingenic JZ47xx ADC controller IIO bindings + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +description: > + Industrial I/O subsystem bindings for ADC controller found in + Ingenic JZ47xx SoCs. + + ADC clients must use the format described in iio-bindings.txt, giving + a phandle and IIO specifier pair ("io-channels") to the ADC controller. + +properties: + compatible: + enum: + - ingenic,jz4725b-adc + - ingenic,jz4740-adc + - ingenic,jz4770-adc + + '#io-channel-cells': + const: 1 + description: + Must be set to <1> to indicate channels are selected by index. + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: adc + + interrupts: + maxItems: 1 + +required: + - compatible + - '#io-channel-cells' + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + #include <dt-bindings/iio/adc/ingenic,adc.h> + + adc@10070000 { + compatible = "ingenic,jz4740-adc"; + #io-channel-cells = <1>; + + reg = <0x10070000 0x30>; + + clocks = <&cgu JZ4740_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml new file mode 100644 index 000000000..6a991e9f7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology / Analog Devices LTC2496 ADC + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Michael Hennerich <Michael.Hennerich@analog.com> + - Stefan Popa <stefan.popa@analog.com> + +properties: + compatible: + enum: + - lltc,ltc2496 + + vref-supply: + description: phandle to an external regulator providing the reference voltage + $ref: /schemas/types.yaml#/definitions/phandle + + reg: + description: spi chipselect number according to the usual spi bindings + + spi-max-frequency: + description: maximal spi bus frequency supported + +required: + - compatible + - vref-supply + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "lltc,ltc2496"; + reg = <0>; + vref-supply = <<c2496_reg>; + spi-max-frequency = <2000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml new file mode 100644 index 000000000..c1772b568 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology / Analog Devices LTC2497 ADC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + +properties: + compatible: + const: + lltc,ltc2497 + + reg: true + vref-supply: true + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@76 { + compatible = "lltc,ltc2497"; + reg = <0x76>; + vref-supply = <<c2497_reg>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml new file mode 100644 index 000000000..b3b292fb1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Berlin 2 Analog to Digital Converter (ADC) + +maintainers: + - Antoine Tenart <antoine.tenart@free-electrons.com> + +description: + The Berlin ADC has 8 channels, with one connected to a temperature sensor. + It is part of the system controller register set. The ADC node should be a + sub-node of the system controller node. + +properties: + compatible: + const: marvell,berlin2-adc + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: adc + - const: tsen + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + sysctrl { + adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml new file mode 100644 index 000000000..0cf87556e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11100 ADC + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: | + Single channel 16 bit ADC with SPI interface. + +properties: + compatible: + const: maxim,max11100 + + reg: + maxItems: 1 + + vref-supply: + description: External reference, needed to establish input scaling. + + spi-max-frequency: + minimum: 100000 + maximum: 4800000 + +additionalProperties: false + +required: + - compatible + - reg + - vref-supply + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "maxim,max11100"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-max-frequency = <240000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml new file mode 100644 index 000000000..e948b3e37 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1118 and similar ADCs + +maintainers: + - Akinobu Mita <akinobu.mita@gmail.com> + +description: | + Dual channel 8bit ADCs. + +properties: + compatible: + enum: + - maxim,max1117 + - maxim,max1118 + - maxim,max1119 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + vref-supply: + description: External reference, needed to establish input scaling + +if: + properties: + compatible: + contains: + const: maxim,max1118 +then: + required: + - vref-supply +else: + properties: + vref-supply: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "maxim,max1118"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-max-frequency = <1000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml new file mode 100644 index 000000000..50bcd72ac --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1238 and similar ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Family of simple ADCs with i2c inteface and internal references. + +properties: + compatible: + enum: + - maxim,max1036 + - maxim,max1037 + - maxim,max1038 + - maxim,max1039 + - maxim,max1136 + - maxim,max1137 + - maxim,max1138 + - maxim,max1139 + - maxim,max1236 + - maxim,max1237 + - maxim,max1238 + - maxim,max1239 + - maxim,max11600 + - maxim,max11601 + - maxim,max11602 + - maxim,max11603 + - maxim,max11604 + - maxim,max11605 + - maxim,max11606 + - maxim,max11607 + - maxim,max11608 + - maxim,max11609 + - maxim,max11610 + - maxim,max11611 + - maxim,max11612 + - maxim,max11613 + - maxim,max11614 + - maxim,max11615 + - maxim,max11616 + - maxim,max11617 + - maxim,max11644 + - maxim,max11645 + - maxim,max11646 + - maxim,max11647 + + reg: + maxItems: 1 + + vcc-supply: true + vref-supply: + description: Optional external reference. If not supplied, internal + reference will be used. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@36 { + compatible = "maxim,max1238"; + reg = <0x36>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml new file mode 100644 index 000000000..4c7e0d94b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Alexandru Lazar +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1241 12-bit, single-channel analog to digital converter + +maintainers: + - Alexandru Lazar <alazar@startmail.com> + +description: | + Bindings for the max1241 12-bit, single-channel ADC device. Datasheet + can be found at: + https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf + +properties: + compatible: + enum: + - maxim,max1241 + + reg: + maxItems: 1 + + vdd-supply: + description: + Device tree identifier of the regulator that powers the ADC. + + vref-supply: + description: + Device tree identifier of the regulator that provides the external + reference voltage. + + shutdown-gpios: + description: + GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If + specified, the /SHDN pin will be asserted between conversions, + thus enabling power-down mode. + maxItems: 1 + + spi-max-frequency: true + +required: + - compatible + - reg + - vdd-supply + - vref-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "maxim,max1241"; + reg = <0>; + vdd-supply = <&adc_vdd>; + vref-supply = <&adc_vref>; + spi-max-frequency = <1000000>; + shutdown-gpios = <&gpio 26 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml new file mode 100644 index 000000000..e04f09f35 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1363.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1363 and similar ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Family of ADCs with i2c inteface, internal references and threshold + monitoring. + +properties: + compatible: + enum: + - maxim,max1361 + - maxim,max1362 + - maxim,max1363 + - maxim,max1364 + + reg: + maxItems: 1 + + vcc-supply: true + vref-supply: + description: Optional external reference. If not supplied, internal + reference will be used. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@36 { + compatible = "maxim,max1363"; + reg = <0x36>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml new file mode 100644 index 000000000..9475a9e6e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: | + These devices combine a high-side current sense amplifier with a 12 bit ADC. + They have an i2c interface. + +properties: + compatible: + enum: + - maxim,max9611 + - maxim,max9612 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Value in micro Ohms of the shunt resistor connected between the RS+ and + RS- inputs, across which the current is measured. Value needed to compute + the scaling of the measured current. + +additionalProperties: false + +required: + - compatible + - reg + - shunt-resistor-micro-ohms + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + shunt-resistor-micro-ohms = <5000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml new file mode 100644 index 000000000..cbbac4ce5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip mcp3201 and similar ADCs + +maintainers: + - Oskar Andero <oskar.andero@gmail.com> + +description: | + Family of simple ADCs with an I2C inteface. + +properties: + compatible: + enum: + - microchip,mcp3001 + - microchip,mcp3002 + - microchip,mcp3004 + - microchip,mcp3008 + - microchip,mcp3201 + - microchip,mcp3202 + - microchip,mcp3204 + - microchip,mcp3208 + - microchip,mcp3301 + - microchip,mcp3550-50 + - microchip,mcp3550-60 + - microchip,mcp3551 + - microchip,mcp3553 + + reg: + maxItems: 1 + + spi-max-frequency: true + spi-cpha: true + spi-cpol: true + + vref-supply: + description: External reference. + + "#io-channel-cells": + const: 1 + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + #io-channel-cells = <1>; + }; + adc@1 { + compatible = "microchip,mcp3002"; + reg = <1>; + vref-supply = <&vref_reg>; + spi-max-frequency = <1500000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml new file mode 100644 index 000000000..95ab285f4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip MCP3911 Dual channel analog front end (ADC) + +maintainers: + - Marcus Folkesson <marcus.folkesson@gmail.com> + - Kent Gustavsson <nedo80@gmail.com> + +description: | + Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be + found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf + +properties: + compatible: + enum: + - microchip,mcp3911 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + clocks: + description: | + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + microchip,device-addr: + description: Device address when multiple MCP3911 chips are present on the same SPI bus. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + + vref-supply: + description: | + Phandle to the external reference voltage supply. + If not specified, the internal voltage reference (1.2V) will be used. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3911"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 2>; + spi-max-frequency = <20000000>; + microchip,device-addr = <0>; + vref-supply = <&vref_reg>; + clocks = <&xtal>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml new file mode 100644 index 000000000..a6cb857a2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorola CPCAP PMIC ADC binding + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC + has ADCs that are used for battery charging and USB PHY VBUS and ID pin + detection. + +properties: + compatible: + enum: + - motorola,cpcap-adc + - motorola,mapphone-cpcap-adc + + interrupts: + maxItems: 1 + + interrupt-names: + const: adcdone + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupt-parent = <&cpcap>; + interrupts = <8 IRQ_TYPE_NONE>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt new file mode 100644 index 000000000..78c06e05c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -0,0 +1,33 @@ +* Mediatek AUXADC - Analog to Digital Converter on Mediatek mobile soc (mt65xx/mt81xx/mt27xx) +=============== + +The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found +in some Mediatek SoCs which among other things measures the temperatures +in the SoC. It can be used directly with register accesses, but it is also +used by thermal controller which reads the temperatures from the AUXADC +directly via its own bus interface. See +Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +for the Thermal Controller which holds a phandle to the AUXADC. + +Required properties: + - compatible: Should be one of: + - "mediatek,mt2701-auxadc": For MT2701 family of SoCs + - "mediatek,mt2712-auxadc": For MT2712 family of SoCs + - "mediatek,mt6765-auxadc": For MT6765 family of SoCs + - "mediatek,mt7622-auxadc": For MT7622 family of SoCs + - "mediatek,mt8173-auxadc": For MT8173 family of SoCs + - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs + - reg: Address range of the AUXADC unit. + - clocks: Should contain a clock specifier for each entry in clock-names + - clock-names: Should contain "main". + - #io-channel-cells: Should be 1, see ../iio-bindings.txt + +Example: + +auxadc: adc@11001000 { + compatible = "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml new file mode 100644 index 000000000..04566ff02 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nuvoton,nau7802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NAU7802 I2c Analog to Digital Converter (ADC) + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: nuvoton,nau7802 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,vldo: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Internal reference voltage in millivolts to be configured. + minimum: 2400 + maximum: 4500 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml new file mode 100644 index 000000000..001cf263b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nuvoton,npcm750-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM BMC Analog to Digital Converter (ADC) + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +description: + The NPCM ADC is a 10-bit converter for eight channel inputs. + +properties: + compatible: + const: nuvoton,npcm750-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: ADC interrupt, should be set for falling edge. + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + description: If not provided the defulat ADC sample rate will be used. + + vref-supply: + description: If not supplied, the internal voltage reference will be used. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@f000c000 { + compatible = "nuvoton,npcm750-adc"; + reg = <0xf000c000 0x8>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml new file mode 100644 index 000000000..6404fb73f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC1850 ADC bindings + +maintainers: + - Joachim Eastwood <manabian@gmail.com> + +description: + Supports the ADC found on the LPC1850 SoC. + +properties: + compatible: + const: nxp,lpc1850-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + vref-supply: true + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - vref-supply + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + vref-supply = <®_vdda>; + resets = <&rgu 40>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml new file mode 100644 index 000000000..2c5032be8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,lpc3220-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC3220 SoC ADC controller + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + +description: + This hardware block has been used on several LPC32XX SoCs. + +properties: + compatible: + const: nxp,lpc3220-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + vref-supply = <&vcc>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt new file mode 100644 index 000000000..4bb9a8606 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt @@ -0,0 +1,48 @@ +* Palmas general purpose ADC IP block devicetree bindings + +Channels list: + 0 battery type + 1 battery temp NTC (optional current source) + 2 GP + 3 temp (with ext. diode, optional current source) + 4 GP + 5 GP + 6 VBAT_SENSE + 7 VCC_SENSE + 8 Backup Battery voltage + 9 external charger (VCHG) + 10 VBUS + 11 DC-DC current probe (how does this work?) + 12 internal die temp + 13 internal die temp + 14 USB ID pin voltage + 15 test network + +Required properties: +- compatible : Must be "ti,palmas-gpadc". +- #io-channel-cells: Should be set to <1>. + +Optional sub-nodes: +ti,channel0-current-microamp: Channel 0 current in uA. + Values are rounded to derive 0uA, 5uA, 15uA, 20uA. +ti,channel3-current-microamp: Channel 3 current in uA. + Values are rounded to derive 0uA, 10uA, 400uA, 800uA. +ti,enable-extended-delay: Enable extended delay. + +Example: + +pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + ... + gpadc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 0 + 16 0 + 17 0>; + #io-channel-cells = <1>; + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <10>; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt new file mode 100644 index 000000000..3ae061277 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt @@ -0,0 +1,157 @@ +Qualcomm's PM8xxx voltage XOADC + +The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal +oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921. + +Required properties: + +- compatible: should be one of: + "qcom,pm8018-adc" + "qcom,pm8038-adc" + "qcom,pm8058-adc" + "qcom,pm8921-adc" + +- reg: should contain the ADC base address in the PMIC, typically + 0x197. + +- xoadc-ref-supply: should reference a regulator that can supply + a reference voltage on demand. The reference voltage may vary + with PMIC variant but is typically something like 2.2 or 1.8V. + +The following required properties are standard for IO channels, see +iio-bindings.txt for more details, but notice that this particular +ADC has a special addressing scheme that require two cells for +identifying each ADC channel: + +- #address-cells: should be set to <2>, the first cell is the + prescaler (on PM8058) or premux (on PM8921) with two valid bits + so legal values are 0x00, 0x01 or 0x02. The second cell + is the main analog mux setting (0x00..0x0f). The combination + of prescaler/premux and analog mux uniquely addresses a hardware + channel on all systems. + +- #size-cells: should be set to <0> + +- #io-channel-cells: should be set to <2>, again the cells are + precaler or premux followed by the analog muxing line. + +- interrupts: should refer to the parent PMIC interrupt controller + and reference the proper ADC interrupt. + +Required subnodes: + +The ADC channels are configured as subnodes of the ADC. + +Since some of them are used for calibrating the ADC, these nodes are +compulsory: + +adc-channel@c { + reg = <0x00 0x0c>; +}; + +adc-channel@d { + reg = <0x00 0x0d>; +}; + +adc-channel@f { + reg = <0x00 0x0f>; +}; + +These three nodes are used for absolute and ratiometric calibration +and only need to have these reg values: they are by hardware definition +1:1 ratio converters that sample 625, 1250 and 0 milliV and create +an interpolation calibration for all other ADCs. + +Optional subnodes: any channels other than channels [0x00 0x0c], +[0x00 0x0d] and [0x00 0x0f] are optional. + +Required channel node properties: + +- reg: should contain the hardware channel number in the range + 0 .. 0xff (8 bits). + +Optional channel node properties: + +- qcom,decimation: + Value type: <u32> + Definition: This parameter is used to decrease the ADC sampling rate. + Quicker measurements can be made by reducing the decimation ratio. + Valid values are 512, 1024, 2048, 4096. + If the property is not found, a default value of 512 will be used. + +- qcom,ratiometric: + Value type: <u32> + Definition: Channel calibration type. If this property is specified + VADC will use a special voltage references for channel + calibration. The available references are specified in the + as a u32 value setting (see below) and it is compulsory + to also specify this reference if ratiometric calibration + is selected. + + If the property is not found, the channel will be + calibrated with the 0.625V and 1.25V reference channels, also + known as an absolute calibration. + The reference voltage pairs when using ratiometric calibration: + 0 = XO_IN/XOADC_GND + 1 = PMIC_IN/XOADC_GND + 2 = PMIC_IN/BMS_CSP + 3 (invalid) + 4 = XOADC_GND/XOADC_GND + 5 = XOADC_VREF/XOADC_GND + +Example: + +xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; +}; + +/* IIO client node */ +iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xoadc 0x00 0x01>, /* Battery */ + <&xoadc 0x00 0x02>, /* DC in (charger) */ + <&xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&xoadc 0x00 0x0b>, /* Die temperature */ + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ +}; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt new file mode 100644 index 000000000..4e36d6e2f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt @@ -0,0 +1,46 @@ +Qualcomm's SPMI PMIC current ADC + +QPNP PMIC current ADC (IADC) provides interface to clients to read current. +A 16 bit ADC is used for current measurements. IADC can measure the current +through an external resistor (channel 1) or internal (built-in) resistor +(channel 0). When using an external resistor it is to be described by +qcom,external-resistor-micro-ohms property. + +IADC node: + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,spmi-iadc". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: IADC base address and length in the SPMI PMIC register map + +- interrupts: + Usage: optional + Value type: <prop-encoded-array> + Definition: End of ADC conversion. + +- qcom,external-resistor-micro-ohms: + Usage: optional + Value type: <u32> + Definition: Sense resister value in micro Ohm. + If not defined value of 10000 micro Ohms will be used. + +Example: + /* IADC node */ + pmic_iadc: iadc@3600 { + compatible = "qcom,spmi-iadc"; + reg = <0x3600 0x100>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + #io-channel-cells = <1>; + }; + + /* IIO client node */ + bat { + io-channels = <&pmic_iadc 0>; + io-channel-names = "iadc"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml new file mode 100644 index 000000000..7f4f827c5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's SPMI PMIC ADC + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + SPMI PMIC voltage ADC (VADC) provides interface to clients to read + voltage. The VADC is a 15-bit sigma-delta ADC. + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read + voltage. The VADC is a 16-bit sigma-delta ADC. + +properties: + compatible: + oneOf: + - items: + - const: qcom,pms405-adc + - const: qcom,spmi-adc-rev2 + + - items: + - enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 + + reg: + description: VADC base address in the SPMI PMIC register map + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + interrupts: + maxItems: 1 + description: + End of conversion interrupt. + + io-channel-ranges: true + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + description: | + Represents the external channels which are connected to the ADC. + For compatible property "qcom,spmi-vadc" following channels, also known as + reference point channels, are used for result calibration and their channel + configuration nodes should be defined: + VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, + VADC_GND_REF and VADC_VDD_VADC. + + properties: + reg: + description: | + ADC channel number. + See include/dt-bindings/iio/qcom,spmi-vadc.h + For PMIC7 ADC, the channel numbers are specified separately per PMIC + in the PMIC-specific files in include/dt-bindings/iio/. + + label: + $ref: /schemas/types.yaml#/definitions/string + description: | + ADC input of the platform as seen in the schematics. + For thermistor inputs connected to generic AMUX or GPIO inputs + these can vary across platform for the same pins. Hence select + the platform schematics name for this channel. + + qcom,decimation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + + qcom,pre-scaling: + description: | + Used for scaling the channel input signal before the signal is + fed to VADC. The configuration for this node is to know the + pre-determined ratio and use it for post scaling. It is a pair of + integers, denoting the numerator and denominator of the fraction by which + input signal is multiplied. For example, <1 3> indicates the signal is scaled + down to 1/3 of its value before ADC measurement. + If property is not found default value depending on chip will be used. + $ref: /schemas/types.yaml#/definitions/uint32-array + oneOf: + - items: + - const: 1 + - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + - items: + - const: 10 + - const: 81 + + qcom,ratiometric: + description: | + Channel calibration type. + - For compatible property "qcom,spmi-vadc", if this property is + specified VADC will use the VDD reference (1.8V) and GND for + channel calibration. If property is not found, channel will be + calibrated with 0.625V and 1.25V reference channels, also + known as absolute calibration. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and + "qcom,spmi-adc-rev2", if this property is specified VADC will use + the VDD reference (1.875V) and GND for channel calibration. If + property is not found, channel will be calibrated with 0V and 1.25V + reference channels, also known as absolute calibration. + type: boolean + + qcom,hw-settle-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Time between AMUX getting configured and the ADC starting + conversion. The 'hw_settle_time' is an index used from valid values + and programmed in hardware to achieve the hardware settling delay. + + qcom,avg-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Number of samples to be used for measurement. + Averaging provides the option to obtain a single measurement + from the ADC that is an average of multiple samples. The value + selected is 2^(value). + + required: + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,spmi-vadc + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 512, 1024, 2048, 4096 ] + default: 512 + + qcom,hw-settle-time: + enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, + 4, 6, 8, 10 ] + default: 0 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ] + default: 1 + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc-rev2 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 256, 512, 1024 ] + default: 1024 + + qcom,hw-settle-time: + enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, + 4, 6, 8, 10 ] + default: 0 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc5 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 250, 420, 840 ] + default: 840 + + qcom,hw-settle-time: + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, + 4, 6, 8, 10, 16, 32, 64, 128 ] + default: 15 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc7 + + then: + patternProperties: + "^.*@[0-9a-f]+$": + properties: + qcom,decimation: + enum: [ 85, 340, 1360 ] + default: 1360 + + qcom,hw-settle-time: + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, + 8000, 16000, 32000, 64000, 128000 ] + default: 15 + + qcom,avg-samples: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + +additionalProperties: false + +examples: + - | + spmi_bus { + #address-cells = <1>; + #size-cells = <0>; + /* VADC node */ + pmic_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 0x1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + /* Channel node */ + adc-chan@39 { + reg = <0x39>; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + + adc-chan@9 { + reg = <0x9>; + }; + + adc-chan@a { + reg = <0xa>; + }; + + adc-chan@e { + reg = <0xe>; + }; + + adc-chan@f { + reg = <0xf>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt new file mode 100644 index 000000000..df5b9f2ad --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt @@ -0,0 +1,98 @@ +* Renesas R-Car GyroADC device driver + +The GyroADC block is a reduced SPI block with up to 8 chipselect lines, +which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs +are sampled by the GyroADC block in a round-robin fashion and the result +presented in the GyroADC registers. + +Required properties: +- compatible: Should be "<soc-specific>", "renesas,rcar-gyroadc". + The <soc-specific> should be one of: + renesas,r8a7791-gyroadc - for the GyroADC block present + in r8a7791 SoC + renesas,r8a7792-gyroadc - for the GyroADC with interrupt + block present in r8a7792 SoC +- reg: Address and length of the register set for the device +- clocks: References to all the clocks specified in the clock-names + property as specified in + Documentation/devicetree/bindings/clock/clock-bindings.txt. +- clock-names: Shall contain "fck". The "fck" is the GyroADC block clock. +- power-domains: Must contain a reference to the PM domain, if available. +- #address-cells: Should be <1> (setting for the subnodes) for all ADCs + except for "fujitsu,mb88101a". Should be <0> (setting for + only subnode) for "fujitsu,mb88101a". +- #size-cells: Should be <0> (setting for the subnodes) + +Sub-nodes: +You must define subnode(s) which select the connected ADC type and reference +voltage for the GyroADC channels. + +Required properties for subnodes: +- compatible: Should be either of: + "fujitsu,mb88101a" + - Fujitsu MB88101A compatible mode, + 12bit sampling, up to 4 channels can be sampled in + round-robin fashion. One Fujitsu chip supplies four + GyroADC channels with data as it contains four ADCs + on the chip and thus for 4-channel operation, single + MB88101A is required. The Cx chipselect lines of the + MB88101A connect directly to two CHS lines of the + GyroADC, no demuxer is required. The data out line + of each MB88101A connects to a shared input pin of + the GyroADC. + "ti,adcs7476" or "ti,adc121" or "adi,ad7476" + - TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode, + 15bit sampling, up to 8 channels can be sampled in + round-robin fashion. One TI/ADI chip supplies single + ADC channel with data, thus for 8-channel operation, + 8 chips are required. A 3:8 chipselect demuxer is + required to connect the nCS line of the TI/ADI chips + to the GyroADC, while MISO line of each TI/ADI ADC + connects to a shared input pin of the GyroADC. + "maxim,max1162" or "maxim,max11100" + - Maxim MAX1162 / Maxim MAX11100 compatible mode, + 16bit sampling, up to 8 channels can be sampled in + round-robin fashion. One Maxim chip supplies single + ADC channel with data, thus for 8-channel operation, + 8 chips are required. A 3:8 chipselect demuxer is + required to connect the nCS line of the MAX chips + to the GyroADC, while MISO line of each Maxim ADC + connects to a shared input pin of the GyroADC. +- reg: Should be the number of the analog input. Should be present + for all ADCs except "fujitsu,mb88101a". +- vref-supply: Reference to the channel reference voltage regulator. + +Example: + vref_max1162: regulator-vref-max1162 { + compatible = "regulator-fixed"; + + regulator-name = "MAX1162 Vref"; + regulator-min-microvolt = <4096000>; + regulator-max-microvolt = <4096000>; + }; + + adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0 0xe6e54000 0 64>; + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + + adc@1 { + reg = <1>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml new file mode 100644 index 000000000..1bb761977 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Successive Approximation Register (SAR) A/D Converter + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,saradc + - const: rockchip,rk3066-tsadc + - const: rockchip,rk3399-saradc + - items: + - enum: + - rockchip,px30-saradc + - rockchip,rk3308-saradc + - rockchip,rk3328-saradc + - rockchip,rv1108-saradc + - const: rockchip,rk3399-saradc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: converter clock + - description: peripheral clock + + clock-names: + items: + - const: saradc + - const: apb_pclk + + resets: + maxItems: 1 + + reset-names: + const: saradc-apb + + vref-supply: + description: + The regulator supply for the ADC reference voltage. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; + vref-supply = <&vcc18>; + #io-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml new file mode 100644 index 000000000..5ebb0ab25 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Analog to Digital Converter (ADC) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + + reg: + maxItems: 1 + + clocks: + description: + Phandle to ADC bus clock. For Exynos3250 additional clock is needed. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Must contain clock names (adc, sclk) matching phandles in clocks + property. + minItems: 1 + maxItems: 2 + + interrupts: + description: + ADC interrupt followed by optional touchscreen interrupt. + minItems: 1 + maxItems: 2 + + "#io-channel-cells": + const: 1 + + io-channel-ranges: true + + vdd-supply: true + + samsung,syscon-phandle: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Phandle to the PMU system controller node (to access the ADC_PHY + register on Exynos3250/4x12/5250/5420/5800). + + has-touchscreen: + description: + If present, indicates that a touchscreen is connected and usable. + type: boolean + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - "#io-channel-cells" + - vdd-supply + +additionalProperties: + type: object + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos-adc-v1 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc + then: + required: + - samsung,syscon-phandle + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-adc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: adc + - const: sclk + else: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: adc + + - if: + required: + - has-touchscreen + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + +examples: + - | + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + }; + + - | + #include <dt-bindings/clock/exynos3250.h> + + adc@126c0000 { + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, + <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml new file mode 100644 index 000000000..a390343d0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device-Tree bindings for sigma delta modulator + +maintainers: + - Arnaud Pouliquen <arnaud.pouliquen@st.com> + +properties: + compatible: + description: | + "sd-modulator" can be used as a generic SD modulator, + if the modulator is not specified in the compatible list. + enum: + - sd-modulator + - ads1201 + + '#io-channel-cells': + const: 0 + +required: + - compatible + - '#io-channel-cells' + +additionalProperties: false + +examples: + - | + ads1202: adc { + compatible = "sd-modulator"; + #io-channel-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml new file mode 100644 index 000000000..caa3ee0b4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC27XX series PMICs ADC binding + +maintainers: + - Baolin Wang <baolin.wang7@gmail.com> + +description: + Supports the ADC found on these PMICs. + +properties: + compatible: + enum: + - sprd,sc2720-adc + - sprd,sc2721-adc + - sprd,sc2723-adc + - sprd,sc2730-adc + - sprd,sc2731-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + hwlocks: + maxItems: 1 + + nvmem-cells: + maxItems: 2 + + nvmem-cell-names: + items: + - const: big_scale_calib + - const: small_scale_calib + +required: + - compatible + - reg + - interrupts + - "#io-channel-cells" + - hwlocks + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + adc@480 { + compatible = "sprd,sc2731-adc"; + reg = <0x480>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; + nvmem-cell-names = "big_scale_calib", "small_scale_calib"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml new file mode 100644 index 000000000..28417b31b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -0,0 +1,453 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 ADC bindings + +description: | + STM32 ADC is a successive approximation analog-to-digital converter. + It has several multiplexed input channels. Conversions can be performed + in single, continuous, scan or discontinuous mode. Result of the ADC is + stored in a left-aligned or right-aligned 32-bit data register. + Conversions can be launched in software or using hardware triggers. + + The analog watchdog feature allows the application to detect if the input + voltage goes beyond the user-defined, higher or lower thresholds. + + Each STM32 ADC block can have up to 3 ADC instances. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + enum: + - st,stm32f4-adc-core + - st,stm32h7-adc-core + - st,stm32mp1-adc-core + + reg: + maxItems: 1 + + interrupts: + description: | + One or more interrupts for ADC block, depending on part used: + - stm32f4 and stm32h7 share a common ADC interrupt line. + - stm32mp1 has two separate interrupt lines, one for each ADC within + ADC block. + minItems: 1 + maxItems: 2 + + clocks: + description: | + Core can use up to two clocks, depending on part used: + - "adc" clock: for the analog circuitry, common to all ADCs. + It's required on stm32f4. + It's optional on stm32h7 and stm32mp1. + - "bus" clock: for registers access, common to all ADCs. + It's not present on stm32f4. + It's required on stm32h7 and stm32mp1. + + clock-names: true + + st,max-clk-rate-hz: + description: + Allow to specify desired max clock rate used by analog circuitry. + + vdda-supply: + description: Phandle to the vdda input analog voltage. + + vref-supply: + description: Phandle to the vref input analog reference voltage. + + booster-supply: + description: + Phandle to the embedded booster regulator that can be used to supply ADC + analog input switches on stm32h7 and stm32mp1. + + vdd-supply: + description: + Phandle to the vdd input voltage. It can be used to supply ADC analog + input switches on stm32mp1. + + st,syscfg: + description: + Phandle to system configuration controller. It can be used to control the + analog circuitry on stm32mp1. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-adc-core + + then: + properties: + clocks: + maxItems: 1 + + clock-names: + const: adc + + interrupts: + items: + - description: interrupt line common for all ADCs + + st,max-clk-rate-hz: + minimum: 600000 + maximum: 36000000 + default: 36000000 + + booster-supply: false + + vdd-supply: false + + st,syscfg: false + + - if: + properties: + compatible: + contains: + const: st,stm32h7-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interrupt line common for all ADCs + + st,max-clk-rate-hz: + minimum: 120000 + maximum: 36000000 + default: 36000000 + + vdd-supply: false + + st,syscfg: false + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + maxItems: 2 + + interrupts: + items: + - description: interrupt line for ADC1 + - description: interrupt line for ADC2 + + st,max-clk-rate-hz: + minimum: 120000 + maximum: 36000000 + default: 36000000 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vdda-supply + - vref-supply + - interrupt-controller + - '#interrupt-cells' + - '#address-cells' + - '#size-cells' + +patternProperties: + "^adc@[0-9]+$": + type: object + description: + An ADC block node should contain at least one subnode, representing an + ADC instance available on the machine. + + properties: + compatible: + enum: + - st,stm32f4-adc + - st,stm32h7-adc + - st,stm32mp1-adc + + reg: + description: | + Offset of ADC instance in ADC block. Valid values are: + - 0x0: ADC1 + - 0x100: ADC2 + - 0x200: ADC3 (stm32f4 only) + maxItems: 1 + + '#io-channel-cells': + const: 1 + + interrupts: + description: | + IRQ Line for the ADC instance. Valid values are: + - 0 for adc@0 + - 1 for adc@100 + - 2 for adc@200 (stm32f4 only) + maxItems: 1 + + clocks: + description: + Input clock private to this ADC instance. It's required only on + stm32f4, that has per instance clock input for registers access. + maxItems: 1 + + dmas: + description: RX DMA Channel + maxItems: 1 + + dma-names: + const: rx + + assigned-resolution-bits: + description: | + Resolution (bits) to use for conversions: + - can be 6, 8, 10 or 12 on stm32f4 + - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 + $ref: /schemas/types.yaml#/definitions/uint32 + + st,adc-channels: + description: | + List of single-ended channels muxed for this ADC. It can have up to: + - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 + - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and + stm32mp1. + $ref: /schemas/types.yaml#/definitions/uint32-array + + st,adc-diff-channels: + description: | + List of differential channels muxed for this ADC. Some channels can + be configured as differential instead of single-ended on stm32h7 and + on stm32mp1. Positive and negative inputs pairs are listed: + <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19. + + Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is + required. Both properties can be used together. Some channels can be + used as single-ended and some other ones as differential (mixed). But + channels can't be configured both as single-ended and differential. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "vinp" indicates positive input number + minimum: 0 + maximum: 19 + - description: | + "vinn" indicates negative input number + minimum: 0 + maximum: 19 + + st,min-sample-time-nsecs: + description: + Minimum sampling time in nanoseconds. Depending on hardware (board) + e.g. high/low analog input source impedance, fine tune of ADC + sampling time may be recommended. This can be either one value or an + array that matches "st,adc-channels" and/or "st,adc-diff-channels" + list, to set sample time resp. for all channels, or independently for + each channel. + $ref: /schemas/types.yaml#/definitions/uint32-array + + allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-adc + + then: + properties: + reg: + enum: + - 0x0 + - 0x100 + - 0x200 + + interrupts: + minimum: 0 + maximum: 2 + + assigned-resolution-bits: + enum: [6, 8, 10, 12] + default: 12 + + st,adc-channels: + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 15 + + st,adc-diff-channels: false + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 16 + items: + minimum: 80 + + required: + - clocks + + - if: + properties: + compatible: + contains: + enum: + - st,stm32h7-adc + - st,stm32mp1-adc + + then: + properties: + reg: + enum: + - 0x0 + - 0x100 + + interrupts: + minimum: 0 + maximum: 1 + + assigned-resolution-bits: + enum: [8, 10, 12, 14, 16] + default: 16 + + st,adc-channels: + minItems: 1 + maxItems: 20 + items: + minimum: 0 + maximum: 19 + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 20 + items: + minimum: 40 + + additionalProperties: false + + anyOf: + - required: + - st,adc-channels + - required: + - st,adc-diff-channels + + required: + - compatible + - reg + - interrupts + - '#io-channel-cells' + +examples: + - | + // Example 1: with stm32f429, ADC1, single-ended channel 8 + adc123: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 168>; + clock-names = "adc"; + st,max-clk-rate-hz = <36000000>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc123>; + interrupts = <0>; + st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + assigned-resolution-bits = <8>; + }; + // ... + // other adc child nodes follow... + }; + + - | + // Example 2: with stm32mp157c to setup ADC1 with: + // - channels 0 & 1 as single-ended + // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc12: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + booster-supply = <&booster>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; + st,syscfg = <&syscfg>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc12>; + interrupts = <0>; + st,adc-channels = <0 1>; + st,adc-diff-channels = <2 6>, <3 7>; + st,min-sample-time-nsecs = <5000>; + dmas = <&dmamux1 9 0x400 0x05>; + dma-names = "rx"; + }; + // ... + // other adc child node follow... + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml new file mode 100644 index 000000000..d61bc011e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -0,0 +1,329 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DFSDM ADC device driver + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + - Olivier Moysan <olivier.moysan@st.com> + +description: | + STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to + interface external sigma delta modulators to STM32 micro controllers. + It is mainly targeted for: + - Sigma delta modulators (motor control, metering...) + - PDM microphones (audio digital microphone) + + It features up to 8 serial digital interfaces (SPI or Manchester) and + up to 4 filters on stm32h7 or 6 filters on stm32mp1. + + Each child node matches with a filter instance. + +properties: + compatible: + enum: + - st,stm32h7-dfsdm + - st,stm32mp1-dfsdm + + reg: + maxItems: 1 + + clocks: + items: + - description: + Internal clock used for DFSDM digital processing and control blocks. + dfsdm clock can also feed CLKOUT, when CLKOUT is used. + - description: audio clock can be used as an alternate to feed CLKOUT. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: dfsdm + - const: audio + minItems: 1 + maxItems: 2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-max-frequency: + description: + SPI clock OUT frequency (Hz). Requested only for SPI master mode. + This clock must be set according to the "clock" property. + Frequency must be a multiple of the rcc clock frequency. + If not, SPI CLKOUT frequency will not be accurate. + maximum: 20000000 + +required: + - compatible + - reg + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +patternProperties: + "^filter@[0-9]+$": + type: object + description: child node + + properties: + compatible: + enum: + - st,stm32-dfsdm-adc + - st,stm32-dfsdm-dmic + + reg: + description: Specifies the DFSDM filter instance used. + maxItems: 1 + + interrupts: + maxItems: 1 + + st,adc-channels: + description: | + List of single-ended channels muxed for this ADC. + On stm32h7 and stm32mp1: + - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. + - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 + + st,adc-channel-names: + description: List of single-ended channel names. + $ref: /schemas/types.yaml#/definitions/string-array + + st,filter-order: + description: | + SinC filter order from 0 to 5. + - 0: FastSinC + - [1-5]: order 1 to 5. + For audio purpose it is recommended to use order 3 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 + + "#io-channel-cells": + const: 1 + + st,adc-channel-types: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + items: + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + items: + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + st,filter0-sync: + description: + Set to 1 to synchronize with DFSDM filter instance 0. + Used for multi microphones synchronization. + type: boolean + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx + + required: + - compatible + - reg + - interrupts + - st,adc-channels + - st,adc-channel-names + - st,filter-order + - "#io-channel-cells" + + allOf: + - if: + properties: + compatible: + contains: + const: st,stm32-dfsdm-adc + + - then: + properties: + st,adc-channels: + minItems: 1 + maxItems: 8 + + st,adc-channel-names: + minItems: 1 + maxItems: 8 + + st,adc-channel-types: + minItems: 1 + maxItems: 8 + + st,adc-channel-clk-src: + minItems: 1 + maxItems: 8 + + io-channels: + description: + From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + This is not required for "st,stm32-dfsdm-pdm" compatibility as + PDM microphone is binded in Audio DT node. + + required: + - io-channels + + - if: + properties: + compatible: + contains: + const: st,stm32-dfsdm-dmic + + - then: + properties: + st,adc-channels: + maxItems: 1 + + st,adc-channel-names: + maxItems: 1 + + st,adc-channel-types: + maxItems: 1 + + st,adc-channel-clk-src: + maxItems: 1 + + required: + - dmas + - dma-names + + patternProperties: + "^dfsdm-dai+$": + type: object + description: child node + + properties: + "#sound-dai-cells": + const: 0 + + io-channels: + description: + From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + + required: + - "#sound-dai-cells" + - io-channels + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32h7-dfsdm + + - then: + patternProperties: + "^filter@[0-9]+$": + properties: + reg: + items: + minimum: 0 + maximum: 3 + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-dfsdm + + - then: + patternProperties: + "^filter@[0-9]+$": + properties: + reg: + items: + minimum: 0 + maximum: 5 + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>; + clock-names = "dfsdm", "audio"; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + #io-channel-cells = <1>; + st,adc-channels = <1>; + st,adc-channel-names = "dmic0"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + + asoc_pdm0: dfsdm-dai { + compatible = "st,stm32h7-dfsdm-dai"; + #sound-dai-cells = <0>; + io-channels = <&dfsdm0 0>; + }; + }; + + dfsdm_pdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + #io-channel-cells = <1>; + st,adc-channels = <2 3>; + st,adc-channel-names = "in2", "in3"; + st,adc-channel-types = "SPI_R", "SPI_R"; + st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; + io-channels = <&sd_adc2 &sd_adc3>; + st,filter-order = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml new file mode 100644 index 000000000..9049c6991 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/st,stmpe-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC on an STMPE multifunction device. + +maintainers: + - Stefan Agner <stefan@agner.ch> + +description: + This ADC forms part of an ST microelectronics STMPE multifunction device . + The ADC is shared with the STMPE touchscreen. As a result some ADC related + settings are specified in the parent node. + The node name myst be stmpe_adc and should be a child node of the stmpe node + to which it belongs. + +properties: + compatible: + const: st,stmpe-adc + + st,norequest-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch). + + "#io-channel-cells": + const: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + stmpe { + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml new file mode 100644 index 000000000..f5a923cc8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc0832.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC0832 and similar ADCs + +maintainers: + - Akinobu Mita <akinobu.mita@gmail.com> + +description: | + 8 bit ADCs with 1, 2, 4 or 8 inputs for single ended or differential + conversion. + +properties: + compatible: + enum: + - ti,adc0831 + - ti,adc0832 + - ti,adc0834 + - ti,adc0838 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: + description: External reference, needed to establish input scaling + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc0832"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <200000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml new file mode 100644 index 000000000..54955f03d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc108s102.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC108S102 and ADC128S102 + +maintainers: + - Bogdan Pricop <bogdan.pricop@emutex.com> + +description: | + Family of 8 channel, 10/12 bit, SPI, single ended ADCs. + +properties: + compatible: + const: + ti,adc108s102 + + reg: true + vref-supply: true + spi-max-frequency: true + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells= <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc108s102"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml new file mode 100644 index 000000000..ec3b2edf1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc12138.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC12138 and similar self-calibrating ADCs + +maintainers: + - Akinobu Mita <akinobu.mita@gmail.com> + +description: | + 13 bit ADCs with 1, 2 or 8 inputs and self calibrating circuitry to + correct for linearity, zero and full scale errors. + +properties: + compatible: + enum: + - ti,adc12130 + - ti,adc12132 + - ti,adc12138 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: End of Conversion (EOC) interrupt + + clocks: + maxItems: 1 + description: Conversion clock input. + + spi-max-frequency: true + + vref-p-supply: + description: The regulator supply for positive analog voltage reference + + vref-n-supply: + description: | + The regulator supply for negative analog voltage reference + (Note that this must not go below GND or exceed vref-p) + If not specified, this is assumed to be analog ground. + + ti,acquisition-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 6, 10, 18, 34 ] + description: | + The number of conversion clock periods for the S/H's acquisition time. + For high source impedances, this value can be increased to 18 or 34. + For less ADC accuracy and/or slower CCLK frequencies this value may be + decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the + datasheet for details. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - vref-p-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc12138"; + reg = <0>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio1>; + clocks = <&cclk>; + vref-p-supply = <&ldo4_reg>; + spi-max-frequency = <5000000>; + ti,acquisition-time = <6>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml new file mode 100644 index 000000000..d54a0183f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc128s052.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC128S052 and similar ADCs + +maintainers: + - Angelo Compagnucci <angelo.compagnucci@gmail.com> + +description: | + Family of 12 bit SPI ADCs with 2 to 8 channels with a range of different + target sample rates. + +properties: + compatible: + enum: + - ti,adc122s021 + - ti,adc122s051 + - ti,adc122s101 + - ti,adc124s021 + - ti,adc124s051 + - ti,adc124s101 + - ti,adc128s052 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc128s052"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml new file mode 100644 index 000000000..3f4f334d6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc161s626.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADC141S626 and ADC161S626 ADCs + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + Single channel 14/16bit differential ADCs + +properties: + compatible: + enum: + - ti,adc141s626 + - ti,adc161s626 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vdda-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,adc161s626"; + vdda-supply = <&vdda_fixed>; + reg = <0>; + spi-max-frequency = <4300000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml new file mode 100644 index 000000000..2c2d01bbc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS1015 4 channel I2C analog to digital converter + +maintainers: + - Daniel Baluta <daniel.baluta@nxp.com> + +description: | + Datasheet at: https://www.ti.com/lit/gpn/ads1015 + Supports both single ended and differential channels. + +properties: + compatible: + const: ti,ads1015 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +patternProperties: + "^channel@[0-7]+$": + type: object + description: + Child nodes needed for each channel that the platform uses. + + properties: + reg: + description: | + 0: Voltage over AIN0 and AIN1. + 1: Voltage over AIN0 and AIN3. + 2: Voltage over AIN1 and AIN3. + 3: Voltage over AIN2 and AIN3. + 4: Voltage over AIN0 and GND. + 5: Voltage over AIN1 and GND. + 6: Voltage over AIN2 and GND. + 7: Voltage over AIN3 and GND. + items: + - minimum: 0 + maximum: 7 + + ti,gain: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: | + pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V (default) + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V + + ti,datarate: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + description: | + Data acquisition rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 (default) + 5: 2400 + 6: 3300 + + required: + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + }; + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml new file mode 100644 index 000000000..5ab5027be --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads7950.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS7950 and similar ADCs + +maintainers: + - David Lechner <david@lechnology.com> + +description: | + Family of 4-16 channel, 8-12 bit ADCs with SPI interface. + +properties: + compatible: + enum: + - ti,ads7950 + - ti,ads7951 + - ti,ads7952 + - ti,ads7953 + - ti,ads7954 + - ti,ads7955 + - ti,ads7956 + - ti,ads7957 + - ti,ads7958 + - ti,ads7959 + - ti,ads7960 + - ti,ads7961 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + vref-supply: + description: Supplies the 2.5V or 5V reference voltage + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads7957"; + reg = <0>; + vref-supply = <&refin_supply>; + spi-max-frequency = <10000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml new file mode 100644 index 000000000..b8c398187 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads8344.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS8344 ADC + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + +description: | + 16bit 8-channel ADC with single ended inputs. + +properties: + compatible: + const: ti,ads8344 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: + description: Supply the 2.5V or 5V reference voltage + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads8344"; + reg = <0>; + vref-supply = <&refin_supply>; + spi-max-frequency = <10000000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml new file mode 100644 index 000000000..a0af4b248 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads8688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' ADS8684 and ADS8688 ADC chip + +maintainers: + - Sean Nyekjaer <sean@geanix.com> + +description: | + SPI 16bit ADCs with 4/8 channels. + +properties: + compatible: + enum: + - ti,ads8684 + - ti,ads8688 + + reg: + maxItems: 1 + + vref-supply: + description: Optional external reference. If not supplied, assume + REFSEL input tied low to enable the internal reference. + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads8688"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml new file mode 100644 index 000000000..6c2539b3d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,tlc4541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLC4541 and similar ADCs + +maintainers: + - Phil Reid <preid@electromag.com.au> + +description: | + 14/16bit single channel ADC with SPI interface. + +properties: + compatible: + enum: + - ti,tlc3541 + - ti,tlc4541 + + reg: + maxItems: 1 + + spi-max-frequency: true + + vref-supply: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,tlc4541"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <200000>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml new file mode 100644 index 000000000..6781ad2f0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl4030-madc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MADC subsystem in the TWL4030 power module + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: + The MADC subsystem in the TWL4030 consists of a 10-bit ADC + combined with a 16-input analog multiplexer. + +properties: + compatible: + const: ti,twl4030-madc + + interrupts: + maxItems: 1 + + ti,system-uses-second-madc-irq: + type: boolean + description: + Set if the second madc irq register should be used, which is intended + to be used by Co-Processors (e.g. a modem). + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + twl { + madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt new file mode 100644 index 000000000..4259e5062 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt @@ -0,0 +1,19 @@ +* Texas Instruments' ADC084S021 + +Required properties: + - compatible : Must be "ti,adc084s021" + - reg : SPI chip select number for the device + - vref-supply : The regulator supply for ADC reference voltage + - spi-cpol : Per spi-bus bindings + - spi-cpha : Per spi-bus bindings + - spi-max-frequency : Per spi-bus bindings + +Example: +adc@0 { + compatible = "ti,adc084s021"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-cpol; + spi-cpha; + spi-max-frequency = <16000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt new file mode 100644 index 000000000..ecf807bb3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt @@ -0,0 +1,25 @@ +* Texas Instruments' ads124s08 and ads124s06 ADC chip + +Required properties: + - compatible : + "ti,ads124s08" + "ti,ads124s06" + - reg : spi chip select number for the device + +Recommended properties: + - spi-max-frequency : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + - spi-cpha : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - reset-gpios : GPIO pin used to reset the device. + +Example: +adc@0 { + compatible = "ti,ads124s08"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt new file mode 100644 index 000000000..e0e0755ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt @@ -0,0 +1,112 @@ +Xilinx XADC device driver + +This binding document describes the bindings for both of them since the +bindings are very similar. The Xilinx XADC is a ADC that can be found in the +series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication. +Currently two different frontends for the DRP interface exist. One that is only +available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The +other one is available on all series 7 platforms and is a softmacro with a AXI +interface. This binding document describes the bindings for both of them since +the bindings are very similar. + +Required properties: + - compatible: Should be one of + * "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device + configuration interface to interface to the XADC hardmacro. + * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to + interface to the XADC hardmacro. + - reg: Address and length of the register set for the device + - interrupts: Interrupt for the XADC control interface. + - clocks: When using the ZYNQ this must be the ZYNQ PCAP clock, + when using the AXI-XADC pcore this must be the clock that provides the + clock to the AXI bus interface of the core. + +Optional properties: + - xlnx,external-mux: + * "none": No external multiplexer is used, this is the default + if the property is omitted. + * "single": External multiplexer mode is used with one + multiplexer. + * "dual": External multiplexer mode is used with two + multiplexers for simultaneous sampling. + - xlnx,external-mux-channel: Configures which pair of pins is used to + sample data in external mux mode. + Valid values for single external multiplexer mode are: + 0: VP/VN + 1: VAUXP[0]/VAUXN[0] + 2: VAUXP[1]/VAUXN[1] + ... + 16: VAUXP[15]/VAUXN[15] + Valid values for dual external multiplexer mode are: + 1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8] + 2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9] + ... + 8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15] + + This property needs to be present if the device is configured for + external multiplexer mode (either single or dual). If the device is + not using external multiplexer mode the property is ignored. + - xnlx,channels: List of external channels that are connected to the ADC + Required properties: + * #address-cells: Should be 1. + * #size-cells: Should be 0. + + The child nodes of this node represent the external channels which are + connected to the ADC. If the property is no present no external + channels will be assumed to be connected. + + Each child node represents one channel and has the following + properties: + Required properties: + * reg: Pair of pins the channel is connected to. + 0: VP/VN + 1: VAUXP[0]/VAUXN[0] + 2: VAUXP[1]/VAUXN[1] + ... + 16: VAUXP[15]/VAUXN[15] + Note each channel number should only be used at most + once. + Optional properties: + * xlnx,bipolar: If set the channel is used in bipolar + mode. + + +Examples: + xadc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&gic>; + clocks = <&pcap_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@8 { + reg = <8>; + }; + }; + }; + + xadc@43200000 { + compatible = "xlnx,axi-xadc-1.00.a"; + reg = <0x43200000 0x1000>; + interrupts = <0 53 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml new file mode 100644 index 000000000..baa65a521 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD74412R/AD74413R device + +maintainers: + - Cosmin Tanislav <cosmin.tanislav@analog.com> + +description: | + The AD74412R and AD74413R are quad-channel software configurable input/output + solutions for building and process control applications. They contain + functionality for analog output, analog input, digital input, resistance + temperature detector, and thermocouple measurements integrated + into a single chip solution with an SPI interface. + The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide + four configurable input/output channels and a suite of diagnostic functions. + The AD74413R differentiates itself from the AD74412R by being HART-compatible. + https://www.analog.com/en/products/ad74412r.html + https://www.analog.com/en/products/ad74413r.html + +properties: + compatible: + enum: + - adi,ad74412r + - adi,ad74413r + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 1000000 + + spi-cpol: true + + interrupts: + maxItems: 1 + + refin-supply: true + + shunt-resistor-micro-ohms: + description: + Shunt (sense) resistor value in micro-Ohms. + default: 100000000 + +required: + - compatible + - reg + - spi-max-frequency + - spi-cpol + - refin-supply + +additionalProperties: false + +patternProperties: + "^channel@[0-3]$": + type: object + description: Represents the external channels which are connected to the device. + + properties: + reg: + description: | + The channel number. It can have up to 4 channels numbered from 0 to 3. + minimum: 0 + maximum: 3 + + adi,ch-func: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Channel function. + HART functions are not supported on AD74412R. + 0 - CH_FUNC_HIGH_IMPEDANCE + 1 - CH_FUNC_VOLTAGE_OUTPUT + 2 - CH_FUNC_CURRENT_OUTPUT + 3 - CH_FUNC_VOLTAGE_INPUT + 4 - CH_FUNC_CURRENT_INPUT_EXT_POWER + 5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER + 6 - CH_FUNC_RESISTANCE_INPUT + 7 - CH_FUNC_DIGITAL_INPUT_LOGIC + 8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER + 9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART + 10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART + minimum: 0 + maximum: 10 + default: 0 + + adi,gpo-comparator: + type: boolean + description: | + Whether to configure GPO as a comparator or not. + When not configured as a comparator, the GPO will be treated as an + output-only GPIO. + + required: + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/iio/addac/adi,ad74413r.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + status = "okay"; + + ad74413r@0 { + compatible = "adi,ad74413r"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + refin-supply = <&ad74413r_refin>; + + channel@0 { + reg = <0>; + + adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>; + }; + + channel@1 { + reg = <1>; + + adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>; + }; + + channel@2 { + reg = <2>; + + adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>; + adi,gpo-comparator; + }; + + channel@3 { + reg = <3>; + + adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt new file mode 100644 index 000000000..821b61b8c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt @@ -0,0 +1,26 @@ +Current Sense Amplifier +======================= + +When an io-channel measures the output voltage from a current sense +amplifier, the interesting measurement is almost always the current +through the sense resistor, not the voltage output. This binding +describes such a current sense circuit. + +Required properties: +- compatible : "current-sense-amplifier" +- io-channels : Channel node of a voltage io-channel. +- sense-resistor-micro-ohms : The sense resistance in microohms. + +Optional properties: +- sense-gain-mult: Amplifier gain multiplier. The default is <1>. +- sense-gain-div: Amplifier gain divider. The default is <1>. + +Example: + +sysi { + compatible = "current-sense-amplifier"; + io-channels = <&tiadc 0>; + + sense-resistor-micro-ohms = <20000>; + sense-gain-mul = <50>; +}; diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt new file mode 100644 index 000000000..0f67108a0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt @@ -0,0 +1,41 @@ +Current Sense Shunt +=================== + +When an io-channel measures the voltage over a current sense shunt, +the interesting measurement is almost always the current through the +shunt, not the voltage over it. This binding describes such a current +sense circuit. + +Required properties: +- compatible : "current-sense-shunt" +- io-channels : Channel node of a voltage io-channel. +- shunt-resistor-micro-ohms : The shunt resistance in microohms. + +Example: +The system current is measured by measuring the voltage over a +3.3 ohms shunt resistor. + +sysi { + compatible = "current-sense-shunt"; + io-channels = <&tiadc 0>; + + /* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */ + shunt-resistor-micro-ohms = <3300000>; +}; + +&i2c { + tiadc: adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* IN0,IN1 differential */ + reg = <0>; + ti,gain = <1>; + ti,datarate = <4>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt new file mode 100644 index 000000000..b452a8406 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt @@ -0,0 +1,53 @@ +Voltage divider +=============== + +When an io-channel measures the midpoint of a voltage divider, the +interesting voltage is often the voltage over the full resistance +of the divider. This binding describes the voltage divider in such +a curcuit. + + Vin ----. + | + .-----. + | R | + '-----' + | + +---- Vout + | + .-----. + | Rout| + '-----' + | + GND + +Required properties: +- compatible : "voltage-divider" +- io-channels : Channel node of a voltage io-channel measuring Vout. +- output-ohms : Resistance Rout over which the output voltage is measured. + See full-ohms. +- full-ohms : Resistance R + Rout for the full divider. The io-channel + is scaled by the Rout / (R + Rout) quotient. + +Example: +The system voltage is circa 12V, but divided down with a 22/222 +voltage divider (R = 200 Ohms, Rout = 22 Ohms) and fed to an ADC. + +sysv { + compatible = "voltage-divider"; + io-channels = <&maxadc 1>; + + /* Scale the system voltage by 22/222 to fit the ADC range. */ + output-ohms = <22>; + full-ohms = <222>; /* 200 + 22 */ +}; + +&spi { + maxadc: adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + #io-channel-cells = <1>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <1000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml new file mode 100644 index 000000000..a557761d8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HMC425A 6-bit Digital Step Attenuator + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Beniamin Bia <beniamin.bia@analog.com> + +description: | + Digital Step Attenuator IIO device with gpio interface. + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + +properties: + compatible: + enum: + - adi,hmc425a + + vcc-supply: true + + ctrl-gpios: + description: + Must contain an array of 6 GPIO specifiers, referring to the GPIO pins + connected to the control pins V1-V6. + minItems: 6 + maxItems: 6 + +required: + - compatible + - ctrl-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + gpio_hmc425a: hmc425a { + compatible = "adi,hmc425a"; + ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>, + <&gpio 39 GPIO_ACTIVE_HIGH>, + <&gpio 38 GPIO_ACTIVE_HIGH>, + <&gpio 37 GPIO_ACTIVE_HIGH>, + <&gpio 36 GPIO_ACTIVE_HIGH>, + <&gpio 35 GPIO_ACTIVE_HIGH>; + vcc-supply = <&foo>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml new file mode 100644 index 000000000..52341c8ba --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS CCS811 VOC Sensor + +maintainers: + - Narcisa Vasile <narcisaanamaria12@gmail.com> + +description: | + Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality. + +properties: + compatible: + enum: + - ams,ccs811 + reg: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the nRESET line. This is an active low + input to CCS811. + maxItems: 1 + + wakeup-gpios: + description: GPIO connected to the nWAKE line. This is an active low + input to CCS811. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + voc@5b { + compatible = "ams,ccs811"; + reg = <0x5b>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml new file mode 100644 index 000000000..4646deeb6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atlas Scientific OEM + EZO sensors + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + Atlas Scientific OEM + EZO sensors connected via I2C + + Datasheets: + http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf + https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf + https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf + +properties: + compatible: + enum: + - atlas,do-sm + - atlas,ec-sm + - atlas,orp-sm + - atlas,ph-sm + - atlas,rtd-sm + - atlas,co2-ezo + - atlas,o2-ezo + - atlas,hum-ezo + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + atlas@66 { + compatible = "atlas,orp-sm"; + reg = <0x66>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt new file mode 100644 index 000000000..7f3827cfb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt @@ -0,0 +1,11 @@ +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors + +Required properties: +- compatible: must be "bosch,bme680" + +Example: + +bme680@76 { + compatible = "bosch,bme680"; + reg = <0x76>; +}; diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml new file mode 100644 index 000000000..1fe561574 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/plantower,pms7003.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Plantower PMS7003 air pollution sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - plantower,pms1003 + - plantower,pms3003 + - plantower,pms5003 + - plantower,pms6003 + - plantower,pms7003 + - plantower,pmsa003 + + vcc-supply: + description: regulator that provides power to the sensor + + plantower,set-gpios: + description: GPIO connected to the SET line + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RESET line + maxItems: 1 + +required: + - compatible + - vcc-supply + +additionalProperties: false + +examples: + - | + serial { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml new file mode 100644 index 000000000..40d87346f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SCD30 carbon dioxide sensor + +maintainers: + - Tomasz Duszynski <tomasz.duszynski@octakon.com> + +description: | + Air quality sensor capable of measuring co2 concentration, temperature + and relative humidity. + +properties: + compatible: + enum: + - sensirion,scd30 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + + sensirion,sel-gpios: + description: GPIO connected to the SEL line + maxItems: 1 + + sensirion,pwm-gpios: + description: GPIO connected to the PWM line + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + co2-sensor@61 { + compatible = "sensirion,scd30"; + reg = <0x61>; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + serial { + co2-sensor { + compatible = "sensirion,scd30"; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt new file mode 100644 index 000000000..5844ed581 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt @@ -0,0 +1,15 @@ +* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor + +Required properties: + + - compatible: must be one of + "sensirion,sgp30" + "sensirion,sgpc3" + - reg: the I2C address of the sensor + +Example: + +gas@58 { + compatible = "sensirion,sgp30"; + reg = <0x58>; +}; diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml new file mode 100644 index 000000000..a93d1972a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SPS30 particulate matter sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - sensirion,sps30 + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + air-pollution-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml new file mode 100644 index 000000000..f845b41d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for iio sensors + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + - Guido Günther <agx@sigxcpu.org> + +description: | + This document defines device tree properties common to several iio + sensors. It doesn't constitue a device tree binding specification by itself but + is meant to be referenced by device tree bindings. + + When referenced from sensor tree bindings the properties defined in this + document are defined as follows. The sensor tree bindings are responsible for + defining whether each property is required or optional. + +properties: + proximity-near-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + For proximity sensors whether an object can be considered near to the + device depends on parameters like sensor position, covering glass and + aperture. This value gives an indication to userspace for which + sensor readings this is the case. + + Raw proximity values equal or above this level should be + considered 'near' to the device (an object is near to the + sensor). + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/iio/dac/ad5592r.txt b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt new file mode 100644 index 000000000..989f96f31 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5592r.txt @@ -0,0 +1,155 @@ +Analog Devices AD5592R/AD5593R DAC/ADC device driver + +Required properties for the AD5592R: + - compatible: Must be "adi,ad5592r" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use (< 30000000) + - spi-cpol: The AD5592R requires inverse clock polarity (CPOL) mode + +Required properties for the AD5593R: + - compatible: Must be "adi,ad5593r" + - reg: I2C address of the device + +Required properties for all supported chips: + - #address-cells: Should be 1. + - #size-cells: Should be 0. + - channel nodes: + Each child node represents one channel and has the following + Required properties: + * reg: Pin on which this channel is connected to. + * adi,mode: Mode or function of this channel. + Macros specifying the valid values + can be found in <dt-bindings/iio/adi,ad5592r.h>. + + The following values are currently supported: + * CH_MODE_UNUSED (the pin is unused) + * CH_MODE_ADC (the pin is ADC input) + * CH_MODE_DAC (the pin is DAC output) + * CH_MODE_DAC_AND_ADC (the pin is DAC output + but can be monitored by an ADC, since + there is no disadvantage this + this should be considered as the + preferred DAC mode) + * CH_MODE_GPIO (the pin is registered + with GPIOLIB) + Optional properties: + * adi,off-state: State of this channel when unused or the + device gets removed. Macros specifying the + valid values can be found in + <dt-bindings/iio/adi,ad5592r.h>. + + * CH_OFFSTATE_PULLDOWN (the pin is pulled down) + * CH_OFFSTATE_OUT_LOW (the pin is output low) + * CH_OFFSTATE_OUT_HIGH (the pin is output high) + * CH_OFFSTATE_OUT_TRISTATE (the pin is + tristated output) + + +Optional properties: + - vref-supply: Phandle to the external reference voltage supply. This should + only be set if there is an external reference voltage connected to the VREF + pin. If the property is not set the internal 2.5V reference is used. + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. + +AD5592R Example: + + #include <dt-bindings/iio/adi,ad5592r.h> + + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref-ad559x"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ad5592r@0 { + #size-cells = <0>; + #address-cells = <1>; + #gpio-cells = <2>; + compatible = "adi,ad5592r"; + reg = <0>; + + spi-max-frequency = <1000000>; + spi-cpol; + + vref-supply = <&vref>; /* optional */ + reset-gpios = <&gpio0 86 0>; /* optional */ + gpio-controller; + + channel@0 { + reg = <0>; + adi,mode = <CH_MODE_DAC>; + }; + channel@1 { + reg = <1>; + adi,mode = <CH_MODE_ADC>; + }; + channel@2 { + reg = <2>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + }; + channel@3 { + reg = <3>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@4 { + reg = <4>; + adi,mode = <CH_MODE_UNUSED>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@5 { + reg = <5>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@6 { + reg = <6>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@7 { + reg = <7>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + }; + +AD5593R Example: + + #include <dt-bindings/iio/adi,ad5592r.h> + + ad5593r@10 { + #size-cells = <0>; + #address-cells = <1>; + #gpio-cells = <2>; + compatible = "adi,ad5593r"; + reg = <0x10>; + gpio-controller; + + channel@0 { + reg = <0>; + adi,mode = <CH_MODE_DAC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@1 { + reg = <1>; + adi,mode = <CH_MODE_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@2 { + reg = <2>; + adi,mode = <CH_MODE_DAC_AND_ADC>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + channel@6 { + reg = <6>; + adi,mode = <CH_MODE_GPIO>; + adi,off-state = <CH_OFFSTATE_PULLDOWN>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt new file mode 100644 index 000000000..502e1e55a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt @@ -0,0 +1,124 @@ +* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver + +Required properties: + - compatible: Has to contain one of the following: + adi,ad5755 + adi,ad5755-1 + adi,ad5757 + adi,ad5735 + adi,ad5737 + + - reg: spi chip select number for the device + - spi-cpha or spi-cpol: is the only modes that is supported + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +See include/dt-bindings/iio/ad5755.h + - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an + external resistor and thereby bypasses + the internal compensation resistor. + - adi,dc-dc-phase: + Valid values for DC DC Phase control is: + 0: All dc-to-dc converters clock on the same edge. + 1: Channel A and Channel B clock on the same edge, + Channel C and Channel D clock on opposite edges. + 2: Channel A and Channel C clock on the same edge, + Channel B and Channel D clock on opposite edges. + 3: Channel A, Channel B, Channel C, and Channel D + clock 90 degrees out of phase from each other. + - adi,dc-dc-freq-hz: + Valid values for DC DC frequency is [Hz]: + 250000 + 410000 + 650000 + - adi,dc-dc-max-microvolt: + Valid values for the maximum allowed Vboost voltage supplied by + the dc-to-dc converter is: + 23000000 + 24500000 + 27000000 + 29500000 + +Optional for every channel: + - adi,mode: + Valid values for DAC modes is: + 0: 0 V to 5 V voltage range. + 1: 0 V to 10 V voltage range. + 2: Plus minus 5 V voltage range. + 3: Plus minus 10 V voltage range. + 4: 4 mA to 20 mA current range. + 5: 0 mA to 20 mA current range. + 6: 0 mA to 24 mA current range. + - adi,ext-current-sense-resistor: boolean set if the hardware a external + current sense resistor. + - adi,enable-voltage-overrange: boolean enable voltage overrange + - adi,slew: Array of slewrate settings should contain 3 fields: + 1: Should be either 0 or 1 in order to enable or disable slewrate. + 2: Slew rate settings: + Valid values for the slew rate update frequency: + 64000 + 32000 + 16000 + 8000 + 4000 + 2000 + 1000 + 500 + 250 + 125 + 64 + 32 + 16 + 8 + 4 + 0 + 3: Slew step size: + Valid values for the step size LSBs: + 1 + 2 + 4 + 16 + 32 + 64 + 128 + 256 + +Example: +dac@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "adi,ad5755"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + adi,dc-dc-phase = <0>; + adi,dc-dc-freq-hz = <410000>; + adi,dc-dc-max-microvolt = <23000000>; + channel@0 { + reg = <0>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@1 { + reg = <1>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@2 { + reg = <2>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@3 { + reg = <3>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/dac/ad5758.txt b/Documentation/devicetree/bindings/iio/dac/ad5758.txt new file mode 100644 index 000000000..2f607f41f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5758.txt @@ -0,0 +1,83 @@ +Analog Devices AD5758 DAC device driver + +Required properties for the AD5758: + - compatible: Must be "adi,ad5758" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use (< 50000000) + - spi-cpha: is the only mode that is supported + +Required properties: + + - adi,dc-dc-mode: Mode of operation of the dc-to-dc converter + Dynamic Power Control (DPC) + In this mode, the AD5758 circuitry senses the output + voltage and dynamically regulates the supply voltage, + VDPC+, to meet compliance requirements plus an optimized + headroom voltage for the output buffer. + + Programmable Power Control (PPC) + In this mode, the VDPC+ voltage is user-programmable to + a fixed level that needs to accommodate the maximum output + load required. + + The output of the DAC core is either converted to a + current or voltage output at the VIOUT pin. Only one mode + can be enabled at any one time. + + The following values are currently supported: + * 1: DPC current mode + * 2: DPC voltage mode + * 3: PPC current mode + + Depending on the selected output mode (voltage or current) one of the + two properties must + be present: + + - adi,range-microvolt: Voltage output range + The array of voltage output ranges must contain two fields: + * <0 5000000>: 0 V to 5 V voltage range + * <0 10000000>: 0 V to 10 V voltage range + * <(-5000000) 5000000>: ±5 V voltage range + * <(-10000000) 10000000>: ±10 V voltage range + - adi,range-microamp: Current output range + The array of current output ranges must contain two fields: + * <0 20000>: 0 mA to 20 mA current range + * <0 24000>: 0 mA to 24 mA current range + * <4 24000>: 4 mA to 20 mA current range + * <(-20000) 20000>: ±20 mA current range + * <(-24000) 24000>: ±24 mA current range + * <(-1000) 22000>: −1 mA to +22 mA current range + +Optional properties: + + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + + - adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit + The following values are currently supported [uA]: + * 150000 + * 200000 + * 250000 + * 300000 + * 350000 + * 400000 + + - adi,slew-time-us: The time it takes for the output to reach the + full scale [uS] + The supported range is between 133us up to 1023984375us + +AD5758 Example: + + dac@0 { + compatible = "adi,ad5758"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + + reset-gpios = <&gpio 22 0>; + + adi,dc-dc-mode = <2>; + adi,range-microvolt = <0 10000000>; + adi,dc-dc-ilim-microamp = <200000>; + adi,slew-time-us = <125000>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ad7303.txt b/Documentation/devicetree/bindings/iio/dac/ad7303.txt new file mode 100644 index 000000000..914610f05 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad7303.txt @@ -0,0 +1,23 @@ +Analog Devices AD7303 DAC device driver + +Required properties: + - compatible: Must be "adi,ad7303" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use (< 30000000) + - Vdd-supply: Phandle to the Vdd power supply + +Optional properties: + - REF-supply: Phandle to the external reference voltage supply. This should + only be set if there is an external reference voltage connected to the REF + pin. If the property is not set Vdd/2 is used as the reference voltage. + +Example: + + ad7303@4 { + compatible = "adi,ad7303"; + reg = <4>; + spi-max-frequency = <10000000>; + Vdd-supply = <&vdd_supply>; + adi,use-external-reference; + REF-supply = <&vref_supply>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml new file mode 100644 index 000000000..fb2c48fc7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5770R DAC device driver + +maintainers: + - Mircea Caprioru <mircea.caprioru@analog.com> + +description: | + Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf + +properties: + compatible: + enum: + - adi,ad5770r + + reg: + maxItems: 1 + + avdd-supply: + description: + AVdd voltage supply. Represents two different supplies in the datasheet + that are in fact the same. + + iovdd-supply: + description: + Voltage supply for the chip interface. + + vref-supply: + description: Specify the voltage of the external reference used. + Available reference options are 1.25 V or 2.5 V. If no + external reference declared then the device will use the + internal reference of 1.25 V. + + adi,external-resistor: + description: Specify if an external 2.5k ohm resistor is used. If not + specified the device will use an internal 2.5k ohm resistor. + The precision resistor is used for reference current generation. + type: boolean + + reset-gpios: + description: GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + maxItems: 1 + + spi-max-frequency: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + channel@0: + description: Represents an external channel which are + connected to the DAC. Channel 0 can act both as a current + source and sink. + type: object + + properties: + reg: + description: This represents the channel number. + const: 0 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - items: + - const: 0 + - const: 300000 + - items: + - const: -60000 + - const: 0 + - items: + - const: -60000 + - const: 300000 + + channel@1: + description: Represents an external channel which are + connected to the DAC. + type: object + + properties: + reg: + description: This represents the channel number. + const: 1 + + adi,range-microamp: + description: Output range of the channel. + items: + - const: 0 + - enum: [140000, 250000] + + channel@2: + description: Represents an external channel which are + connected to the DAC. + type: object + + properties: + reg: + description: This represents the channel number. + const: 2 + + adi,range-microamp: + description: Output range of the channel. + items: + - const: 0 + - enum: [55000, 150000] + +patternProperties: + "^channel@([3-5])$": + type: object + description: Represents the external channels which are connected to the DAC. + properties: + reg: + description: This represents the channel number. + minimum: 3 + maximum: 5 + + adi,range-microamp: + description: Output range of the channel. + items: + - const: 0 + - enum: [45000, 100000] + +required: + - reg + - channel@0 + - channel@1 + - channel@2 + - channel@3 + - channel@4 + - channel@5 + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5770r@0 { + compatible = "adi,ad5770r"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + adi,external-resistor; + reset-gpios = <&gpio 22 0>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + adi,range-microamp = <0 300000>; + }; + + channel@1 { + reg = <1>; + adi,range-microamp = <0 140000>; + }; + + channel@2 { + reg = <2>; + adi,range-microamp = <0 55000>; + }; + + channel@3 { + reg = <3>; + adi,range-microamp = <0 45000>; + }; + + channel@4 { + reg = <4>; + adi,range-microamp = <0 45000>; + }; + + channel@5 { + reg = <5>; + adi,range-microamp = <0 45000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/dpot-dac.txt b/Documentation/devicetree/bindings/iio/dac/dpot-dac.txt new file mode 100644 index 000000000..fdf47a01b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/dpot-dac.txt @@ -0,0 +1,41 @@ +Bindings for DAC emulation using a digital potentiometer + +It is assumed that the dpot is used as a voltage divider between the +current dpot wiper setting and the maximum resistance of the dpot. The +divided voltage is provided by a vref regulator. + + .------. + .-----------. | | + | vref |--' .---. + | regulator |--. | | + '-----------' | | d | + | | p | + | | o | wiper + | | t |<---------+ + | | | + | '---' dac output voltage + | | + '------+------------+ + +Required properties: +- compatible: Should be "dpot-dac" +- vref-supply: The regulator supplying the voltage divider. +- io-channels: Channel node of the dpot to be used for the voltage division. +- io-channel-names: Should be "dpot". + +Example: + + &i2c { + dpot: mcp4651-503@28 { + compatible = "microchip,mcp4651-503"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + }; + + dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt new file mode 100644 index 000000000..eaebbf8da --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt @@ -0,0 +1,20 @@ +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver + +Datasheet publicly available at: +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf + +Required properties: + - compatible: Should be one of + maxim,ds4422 + maxim,ds4424 + - reg: Should contain the DAC I2C address + +Optional properties: + - vcc-supply: Power supply is optional. If not defined, driver will ignore it. + +Example: + ds4224@10 { + compatible = "maxim,ds4424"; + reg = <0x10>; /* When A0, A1 pins are ground */ + vcc-supply = <&vcc_3v3>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml new file mode 100644 index 000000000..e51a585bd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs + +maintainers: + - Marcus Folkesson <marcus.folkesson@gmail.com> + +description: | + Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC. + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf + +properties: + compatible: + enum: + - lltc,ltc1660 + - lltc,ltc1665 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + vref-supply: + description: Phandle to the external reference voltage supply. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "lltc,ltc1660"; + reg = <0>; + spi-max-frequency = <5000000>; + vref-supply = <&vref_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml new file mode 100644 index 000000000..edf804d0a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Bindings for the Linear Technology LTC2632/2634/2636 DAC + Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf + +properties: + compatible: + enum: + - lltc,ltc2632-l12 + - lltc,ltc2632-l10 + - lltc,ltc2632-l8 + - lltc,ltc2632-h12 + - lltc,ltc2632-h10 + - lltc,ltc2632-h8 + - lltc,ltc2634-l12 + - lltc,ltc2634-l10 + - lltc,ltc2634-l8 + - lltc,ltc2634-h12 + - lltc,ltc2634-h10 + - lltc,ltc2634-h8 + - lltc,ltc2636-l12 + - lltc,ltc2636-l10 + - lltc,ltc2636-l8 + - lltc,ltc2636-h12 + - lltc,ltc2636-h10 + - lltc,ltc2636-h8 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 2000000 + + vref-supply: + description: + Phandle to the external reference voltage supply. This should + only be set if there is an external reference voltage connected to the VREF + pin. If the property is not set the internal reference is used. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref-ltc2632"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "lltc,ltc2632"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt new file mode 100644 index 000000000..42db783c4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt @@ -0,0 +1,19 @@ +NXP LPC1850 DAC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-dac" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: +dac: dac@400e1000 { + compatible = "nxp,lpc1850-dac"; + reg = <0x400e1000 0x1000>; + interrupts = <0>; + clocks = <&ccu1 CLK_APB3_DAC>; + vref-supply = <®_vdda>; + resets = <&rgu 42>; +}; diff --git a/Documentation/devicetree/bindings/iio/dac/max5821.txt b/Documentation/devicetree/bindings/iio/dac/max5821.txt new file mode 100644 index 000000000..54276ce8c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/max5821.txt @@ -0,0 +1,14 @@ +Maxim max5821 DAC device driver + +Required properties: + - compatible: Must be "maxim,max5821" + - reg: Should contain the DAC I2C address + - vref-supply: Phandle to the vref power supply + +Example: + + max5821@38 { + compatible = "maxim,max5821"; + reg = <0x38>; + vref-supply = <®_max5821>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/mcp4725.txt b/Documentation/devicetree/bindings/iio/dac/mcp4725.txt new file mode 100644 index 000000000..1bc6c093f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/mcp4725.txt @@ -0,0 +1,35 @@ +Microchip mcp4725 and mcp4726 DAC device driver + +Required properties: + - compatible: Must be "microchip,mcp4725" or "microchip,mcp4726" + - reg: Should contain the DAC I2C address + - vdd-supply: Phandle to the Vdd power supply. This supply is used as a + voltage reference on mcp4725. It is used as a voltage reference on + mcp4726 if there is no vref-supply specified. + +Optional properties (valid only for mcp4726): + - vref-supply: Optional phandle to the Vref power supply. Vref pin is + used as a voltage reference when this supply is specified. + - microchip,vref-buffered: Boolean to enable buffering of the external + Vref pin. This boolean is not valid without the vref-supply. Quoting + the datasheet: This is offered in cases where the reference voltage + does not have the current capability not to drop its voltage when + connected to the internal resistor ladder circuit. + +Examples: + + /* simple mcp4725 */ + mcp4725@60 { + compatible = "microchip,mcp4725"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + }; + + /* mcp4726 with the buffered external reference voltage */ + mcp4726@60 { + compatible = "microchip,mcp4726"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + vref-supply = <&vdac_vref>; + microchip,vref-buffered; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml new file mode 100644 index 000000000..393f70059 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 DAC bindings + +description: | + The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC + may be configured in 8 or 12-bit mode. It has two output channels, each with + its own converter. + It has built-in noise and triangle waveform generator and supports external + triggers for conversions. The DAC's output buffer allows a high drive output + current. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + enum: + - st,stm32f4-dac-core + - st,stm32h7-dac-core + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk + + vref-supply: + description: Phandle to the vref input analog reference voltage. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + - '#address-cells' + - '#size-cells' + +patternProperties: + "^dac@[1-2]+$": + type: object + description: + A DAC block node should contain at least one subnode, representing an + DAC instance/channel available on the machine. + + properties: + compatible: + const: st,stm32-dac + + reg: + description: Must be either 1 or 2, to define (single) channel in use + enum: [1, 2] + + '#io-channel-cells': + const: 1 + + additionalProperties: false + + required: + - compatible + - reg + - '#io-channel-cells' + +examples: + - | + // Example on stm32mp157c + #include <dt-bindings/clock/stm32mp1-clks.h> + dac: dac@40017000 { + compatible = "st,stm32h7-dac-core"; + reg = <0x40017000 0x400>; + clocks = <&rcc DAC12>; + clock-names = "pclk"; + vref-supply = <&vref>; + #address-cells = <1>; + #size-cells = <0>; + + dac@1 { + compatible = "st,stm32-dac"; + #io-channel-cells = <1>; + reg = <1>; + }; + + dac@2 { + compatible = "st,stm32-dac"; + #io-channel-cells = <1>; + reg = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt new file mode 100644 index 000000000..03af6b9a4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt @@ -0,0 +1,24 @@ +* Texas Instruments DAC5571 Family + +Required properties: + - compatible: Should contain + "ti,dac5571" + "ti,dac6571" + "ti,dac7571" + "ti,dac5574" + "ti,dac6574" + "ti,dac7574" + "ti,dac5573" + "ti,dac6573" + "ti,dac7573" + - reg: Should contain the DAC I2C address + +Optional properties: + - vref-supply: The regulator supply for DAC reference voltage + +Example: +dac@0 { + compatible = "ti,dac5571"; + reg = <0x4C>; + vref-supply = <&vdd_supply>; +}; diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt new file mode 100644 index 000000000..e5a507db5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt @@ -0,0 +1,23 @@ +TI DAC7311 device tree bindings + +Required properties: +- compatible: must be set to: + * "ti,dac7311" + * "ti,dac6311" + * "ti,dac5311" +- reg: spi chip select number for the device +- vref-supply: The regulator supply for ADC reference voltage + +Optional properties: +- spi-max-frequency: Max SPI frequency to use + +Example: + + spi_master { + dac@0 { + compatible = "ti,dac7311"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vdd_supply>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt new file mode 100644 index 000000000..1db45939d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt @@ -0,0 +1,20 @@ +TI DAC7512 DEVICETREE BINDINGS + +Required properties: + + - "compatible" Must be set to "ti,dac7512" + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + + +Example: + + spi_master { + dac7512: dac7512@0 { + compatible = "ti,dac7512"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + }; + }; + diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt new file mode 100644 index 000000000..17af395b9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt @@ -0,0 +1,28 @@ +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter + +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed +12-bit monotonicity performance over the industrial temperature range. +Is is programmable through an SPI interface. + +The internal DACs are loaded when the LOADDACS pin is pulled down. + +https://www.ti.com/lit/ds/sbas106/sbas106.pdf + +Required Properties: +- compatible: Should be one of: + "ti,dac7612" + "ti,dac7612u" + "ti,dac7612ub" +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional Properties: +- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin. +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + + dac@1 { + compatible = "ti,dac7612"; + reg = <0x1>; + ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt new file mode 100644 index 000000000..9cb0e10df --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt @@ -0,0 +1,34 @@ +Texas Instruments 8/10/12-bit 2/4-channel DAC driver + +Required properties: + - compatible: Must be one of: + "ti,dac082s085" + "ti,dac102s085" + "ti,dac122s085" + "ti,dac084s085" + "ti,dac104s085" + "ti,dac124s085" + - reg: Chip select number. + - spi-cpha, spi-cpol: SPI mode (0,1) or (1,0) must be used, so specify + either spi-cpha or spi-cpol (but not both). + - vref-supply: Phandle to the external reference voltage supply. + +For other required and optional properties of SPI slave nodes please refer to +../../spi/spi-bus.txt. + +Example: + vref_2v5_reg: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + dac@0 { + compatible = "ti,dac082s085"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-cpol; + vref-supply = <&vref_2v5_reg>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt new file mode 100644 index 000000000..20c6c7ae9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt @@ -0,0 +1,20 @@ +Freescale vf610 Digital to Analog Converter bindings + +The devicetree bindings are for the new DAC driver written for +vf610 SoCs from Freescale. + +Required properties: +- compatible: Should contain "fsl,vf610-dac" +- reg: Offset and length of the register set for the device +- interrupts: Should contain the interrupt for the device +- clocks: The clock is needed by the DAC controller +- clock-names: Must contain "dac" matching entry in the clocks property. + +Example: +dac0: dac@400cc000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cc000 0x1000>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC0>; +}; diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4350.txt b/Documentation/devicetree/bindings/iio/frequency/adf4350.txt new file mode 100644 index 000000000..f8c181d81 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adf4350.txt @@ -0,0 +1,86 @@ +Analog Devices ADF4350/ADF4351 device driver + +Required properties: + - compatible: Should be one of + * "adi,adf4350": When using the ADF4350 device + * "adi,adf4351": When using the ADF4351 device + - reg: SPI chip select numbert for the device + - spi-max-frequency: Max SPI frequency to use (< 20000000) + - clocks: From common clock binding. Clock is phandle to clock for + ADF435x Reference Clock (CLKIN). + +Optional properties: + - gpios: GPIO Lock detect - If set with a valid phandle and GPIO number, + pll lock state is tested upon read. + - adi,channel-spacing: Channel spacing in Hz (influences MODULUS). + - adi,power-up-frequency: If set in Hz the PLL tunes to + the desired frequency on probe. + - adi,reference-div-factor: If set the driver skips dynamic calculation + and uses this default value instead. + - adi,reference-doubler-enable: Enables reference doubler. + - adi,reference-div2-enable: Enables reference divider. + - adi,phase-detector-polarity-positive-enable: Enables positive phase + detector polarity. Default = negative. + - adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision. + Default = 10ns. + - adi,lock-detect-function-integer-n-enable: Enables lock detect + for integer-N mode. Default = factional-N mode. + - adi,charge-pump-current: Charge pump current in mA. + Default = 2500mA. + - adi,muxout-select: On chip multiplexer output selection. + Valid values for the multiplexer output are: + 0: Three-State Output (default) + 1: DVDD + 2: DGND + 3: R-Counter output + 4: N-Divider output + 5: Analog lock detect + 6: Digital lock detect + - adi,low-spur-mode-enable: Enables low spur mode. + Default = Low noise mode. + - adi,cycle-slip-reduction-enable: Enables cycle slip reduction. + - adi,charge-cancellation-enable: Enabled charge pump + charge cancellation for integer-N modes. + - adi,anti-backlash-3ns-enable: Enables 3ns antibacklash pulse width + for integer-N modes. + - adi,band-select-clock-mode-high-enable: Enables faster band + selection logic. + - adi,12bit-clk-divider: Clock divider value used when + adi,12bit-clkdiv-mode != 0 + - adi,clk-divider-mode: + Valid values for the clkdiv mode are: + 0: Clock divider off (default) + 1: Fast lock enable + 2: Phase resync enable + - adi,aux-output-enable: Enables auxiliary RF output. + - adi,aux-output-fundamental-enable: Selects fundamental VCO output on + the auxiliary RF output. Default = Output of RF dividers. + - adi,mute-till-lock-enable: Enables Mute-Till-Lock-Detect function. + - adi,output-power: Output power selection. + Valid values for the power mode are: + 0: -4dBm (default) + 1: -1dBm + 2: +2dBm + 3: +5dBm + - adi,aux-output-power: Auxiliary output power selection. + Valid values for the power mode are: + 0: -4dBm (default) + 1: -1dBm + 2: +2dBm + 3: +5dBm + + +Example: + lo_pll0_rx_adf4351: adf4351-rx-lpc@4 { + compatible = "adi,adf4351"; + reg = <4>; + spi-max-frequency = <10000000>; + clocks = <&clk0_ad9523 9>; + clock-names = "clkin"; + adi,channel-spacing = <10000>; + adi,power-up-frequency = <2400000000>; + adi,phase-detector-polarity-positive-enable; + adi,charge-pump-current = <2500>; + adi,output-power = <3>; + adi,mute-till-lock-enable; + }; diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml new file mode 100644 index 000000000..6b3a611e1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers + +maintainers: + - Popa Stefan <stefan.popa@analog.com> + +description: | + Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf + +properties: + compatible: + enum: + - adi,adf4371 + - adi,adf4372 + + reg: + maxItems: 1 + + clocks: + description: + Definition of the external clock (see clock/clock-bindings.txt) + maxItems: 1 + + clock-names: + description: + Must be "clkin" + maxItems: 1 + + adi,mute-till-lock-en: + type: boolean + description: + If this property is present, then the supply current to RF8P and RF8N + output stage will shut down until the ADF4371/ADF4372 achieves lock as + measured by the digital lock detect circuitry. + + spi-max-frequency: true + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + frequency@0 { + compatible = "adi,adf4371"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adf4371_clkin>; + clock-names = "clkin"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml new file mode 100644 index 000000000..662ec59ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/adi,adxrs290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope + +maintainers: + - Nishant Malpani <nish.malpani25@gmail.com> + +description: | + Bindings for the Analog Devices ADXRS290 dual-axis MEMS gyroscope device. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf + +properties: + compatible: + const: adi,adxrs290 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpol: true + + spi-cpha: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - spi-max-frequency + - spi-cpol + - spi-cpha + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + gyro@0 { + compatible = "adi,adxrs290"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt new file mode 100644 index 000000000..bb43d1ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt @@ -0,0 +1,20 @@ +* Bosch BMG160 triaxial rotation sensor (gyroscope) + +Required properties: + + - compatible : should be "bosch,bmg160", "bosch,bmi055_gyro" or "bosch,bmi088_gyro" + - reg : the I2C address of the sensor (0x69) + +Optional properties: + + - interrupts : interrupt mapping for GPIO IRQ, it should by configured with + flags IRQ_TYPE_EDGE_RISING + +Example: + +bmg160@69 { + compatible = "bosch,bmg160"; + reg = <0x69>; + interrupt-parent = <&gpio6>; + interrupts = <18 (IRQ_TYPE_EDGE_RISING)>; +}; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt new file mode 100644 index 000000000..233fe207a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt @@ -0,0 +1,45 @@ +Invensense MPU-3050 Gyroscope device tree bindings + +Required properties: + - compatible : should be "invensense,mpu3050" + - reg : the I2C address of the sensor + +Optional properties: + - interrupts : interrupt mapping for the trigger interrupt from the + internal oscillator. The following IRQ modes are supported: + IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and + IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware + for the desired interrupt type. + - vdd-supply : supply regulator for the main power voltage. + - vlogic-supply : supply regulator for the signal voltage. + - mount-matrix : see iio/mount-matrix.txt + +Optional subnodes: + - The MPU-3050 will pass through and forward the I2C signals from the + incoming I2C bus, alternatively drive traffic to a slave device (usually + an accelerometer) on its own initiative. Therefore is supports a subnode + i2c gate node. For details see: i2c/i2c-gate.txt + +Example: + +mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + interrupt-parent = <&foo>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&bar>; + vlogic-supply = <&baz>; + + /* External I2C interface */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + fnord@18 { + compatible = "fnord"; + reg = <0x18>; + interrupt-parent = <&foo>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt new file mode 100644 index 000000000..465e104bb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt @@ -0,0 +1,31 @@ +* NXP FXAS21002C Gyroscope device tree bindings + +http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C + +Required properties: + - compatible : should be "nxp,fxas21002c" + - reg : the I2C address of the sensor or SPI chip select number for the + device. + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the bus. + +Optional properties: + - reset-gpios : gpio used to reset the device, see gpio/gpio.txt + - interrupts : device support 2 interrupts, INT1 and INT2, + the interrupts can be triggered on rising or falling edges. + See interrupt-controller/interrupts.txt + - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt + line in use. + - drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share + the same interrupt line. This is a boolean property. + (This binding is taken from pinctrl/pinctrl-bindings.txt) + +Example: + +gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + vdd-supply = <®_peri_3p15v>; + vddio-supply = <®_peri_3p15v>; +}; diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt new file mode 100644 index 000000000..8e412054d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt @@ -0,0 +1,33 @@ +Texas Instruments AFE4403 Heart rate and Pulse Oximeter + +Required properties: + - compatible : Should be "ti,afe4403". + - reg : SPI chip select address of device. + - tx-supply : Regulator supply to transmitting LEDs. + - interrupts : The interrupt line the device ADC_RDY pin is + connected to. For details refer to, + ../../interrupt-controller/interrupts.txt. + +Optional properties: + - reset-gpios : GPIO used to reset the device. + For details refer to, ../../gpio/gpio.txt. + +For other required and optional properties of SPI slave nodes +please refer to ../../spi/spi-bus.txt. + +Example: + +&spi0 { + heart_mon@0 { + compatible = "ti,afe4403"; + reg = <0>; + spi-max-frequency = <10000000>; + + tx-supply = <&vbat>; + + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; + + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt new file mode 100644 index 000000000..0b52830a0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt @@ -0,0 +1,29 @@ +Texas Instruments AFE4404 Heart rate and Pulse Oximeter + +Required properties: + - compatible : Should be "ti,afe4404". + - reg : I2C address of the device. + - tx-supply : Regulator supply to transmitting LEDs. + - interrupts : The interrupt line the device ADC_RDY pin is + connected to. For details refer to, + ../interrupt-controller/interrupts.txt. + +Optional properties: + - reset-gpios : GPIO used to reset the device. + For details refer to, ../gpio/gpio.txt. + +Example: + +&i2c2 { + heart_mon@58 { + compatible = "ti,afe4404"; + reg = <0x58>; + + tx-supply = <&vbat>; + + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; + + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt new file mode 100644 index 000000000..0054908a6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -0,0 +1,28 @@ +Maxim MAX30100 heart rate and pulse oximeter sensor + +* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf + +Required properties: + - compatible: must be "maxim,max30100" + - reg: the I2C address of the sensor + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + +Optional properties: + - maxim,led-current-microamp: configuration for LED current in microamperes + while the engine is running. First indexed value is the configuration for + the RED LED, and second value is for the IR LED. + + Refer to the datasheet for the allowed current values. + +Example: + +max30100@57 { + compatible = "maxim,max30100"; + reg = <0x57>; + maxim,led-current-microamp = <24000 50000>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; +}; diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt new file mode 100644 index 000000000..7ef7ae40a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -0,0 +1,33 @@ +Maxim MAX30102 heart rate and pulse oximeter sensor +Maxim MAX30105 optical particle-sensing module + +* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf +* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf + +Required properties: + - compatible: must be "maxim,max30102" or "maxim,max30105" + - reg: the I2C address of the sensor + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + +Optional properties: + - maxim,red-led-current-microamp: configuration for red LED current + - maxim,ir-led-current-microamp: configuration for IR LED current + - maxim,green-led-current-microamp: configuration for green LED current + (max30105 only) + + Note that each step is approximately 200 microamps, ranging from 0 uA to + 50800 uA. + +Example: + +max30102@57 { + compatible = "maxim,max30102"; + reg = <0x57>; + maxim,red-led-current-microamp = <7000>; + maxim,ir-led-current-microamp = <7000>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; +}; diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.txt b/Documentation/devicetree/bindings/iio/humidity/dht11.txt new file mode 100644 index 000000000..ecc24c199 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/dht11.txt @@ -0,0 +1,14 @@ +* DHT11 humidity/temperature sensor (and compatibles like DHT22) + +Required properties: + - compatible: Should be "dht11" + - gpios: Should specify the GPIO connected to the sensor's data + line, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. + +Example: + +humidity_sensor { + compatible = "dht11"; + gpios = <&gpio0 6 0>; +} diff --git a/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt b/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt new file mode 100644 index 000000000..c52333bdf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/hdc100x.txt @@ -0,0 +1,17 @@ +* HDC100x temperature + humidity sensors + +Required properties: + - compatible: Should contain one of the following: + ti,hdc1000 + ti,hdc1008 + ti,hdc1010 + ti,hdc1050 + ti,hdc1080 + - reg: i2c address of the sensor + +Example: + +hdc100x@40 { + compatible = "ti,hdc1000"; + reg = <0x40>; +}; diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt new file mode 100644 index 000000000..84d029372 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt @@ -0,0 +1,30 @@ +* HTS221 STM humidity + temperature sensor + +Required properties: +- compatible: should be "st,hts221" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. + Refer to pinctrl/pinctrl-bindings.txt for the property description. +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +hts221@5f { + compatible = "st,hts221"; + reg = <0x5f>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/humidity/htu21.txt b/Documentation/devicetree/bindings/iio/humidity/htu21.txt new file mode 100644 index 000000000..97d79636f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/htu21.txt @@ -0,0 +1,13 @@ +*HTU21 - Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor + +Required properties: + + - compatible: should be "meas,htu21" or "meas,ms8607-humidity" + - reg: I2C address of the sensor + +Example: + +htu21@40 { + compatible = "meas,htu21"; + reg = <0x40>; +}; diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml new file mode 100644 index 000000000..7037f82ec --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDC2010/HDC2080 humidity and temperature iio sensors + +maintainers: + - Eugene Zaikonnikov <ez@norophonic.com> + +description: | + Relative humidity and tempereature sensors on I2C bus + + Datasheets are available at: + http://www.ti.com/product/HDC2010/datasheet + http://www.ti.com/product/HDC2080/datasheet + +properties: + compatible: + enum: + - ti,hdc2010 + - ti,hdc2080 + + vdd-supply: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + humidity@40 { + compatible = "ti,hdc2010"; + reg = <0x40>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt new file mode 100644 index 000000000..aa63cac73 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt @@ -0,0 +1,102 @@ +This binding is derived from clock bindings, and based on suggestions +from Lars-Peter Clausen [1]. + +Sources of IIO channels can be represented by any node in the device +tree. Those nodes are designated as IIO providers. IIO consumer +nodes use a phandle and IIO specifier pair to connect IIO provider +outputs to IIO inputs. Similar to the gpio specifiers, an IIO +specifier is an array of one or more cells identifying the IIO +output on a device. The length of an IIO specifier is defined by the +value of a #io-channel-cells property in the IIO provider node. + +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2 + +==IIO providers== + +Required properties: +#io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes + with a single IIO output and 1 for nodes with multiple + IIO outputs. + +Optional properties: +label: A symbolic name for the device. + + +Example for a simple configuration with no trigger: + + adc: voltage-sensor@35 { + compatible = "maxim,max1139"; + reg = <0x35>; + #io-channel-cells = <1>; + label = "voltage_feedback_group1"; + }; + +Example for a configuration with trigger: + + adc@35 { + compatible = "some-vendor,some-adc"; + reg = <0x35>; + + adc1: iio-device@0 { + #io-channel-cells = <1>; + /* other properties */ + }; + adc2: iio-device@1 { + #io-channel-cells = <1>; + /* other properties */ + }; + }; + +==IIO consumers== + +Required properties: +io-channels: List of phandle and IIO specifier pairs, one pair + for each IIO input to the device. Note: if the + IIO provider specifies '0' for #io-channel-cells, + then only the phandle portion of the pair will appear. + +Optional properties: +io-channel-names: + List of IIO input name strings sorted in the same + order as the io-channels property. Consumers drivers + will use io-channel-names to match IIO input names + with IIO specifiers. +io-channel-ranges: + Empty property indicating that child nodes can inherit named + IIO channels from this node. Useful for bus nodes to provide + and IIO channel to their children. + +For example: + + device { + io-channels = <&adc 1>, <&ref 0>; + io-channel-names = "vcc", "vdd"; + }; + +This represents a device with two IIO inputs, named "vcc" and "vdd". +The vcc channel is connected to output 1 of the &adc device, and the +vdd channel is connected to output 0 of the &ref device. + +==Example== + + adc: max1139@35 { + compatible = "maxim,max1139"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + ... + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, + <&adc 3>, <&adc 4>, <&adc 5>, + <&adc 6>, <&adc 7>, <&adc 8>, + <&adc 9>; + }; + + some_consumer { + compatible = "some-consumer"; + io-channels = <&adc 10>, <&adc 11>; + io-channel-names = "adc1", "adc2"; + }; diff --git a/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt b/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt new file mode 100644 index 000000000..5ff38728f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt @@ -0,0 +1,26 @@ +Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer + +https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf +https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf + +Required properties: + - compatible : should be one of + "adi,ad5933" + "adi,ad5934" + - reg : the I2C address. + - vdd-supply : The regulator supply for DVDD, AVDD1 and AVDD2 when they + are connected together. + +Optional properties: +- clocks : external clock reference. +- clock-names : must be "mclk" if clocks is set. + +Example for a I2C device node: + + impedance-analyzer@0d { + compatible = "adi,adxl345"; + reg = <0x0d>; + vdd-supply = <&vdd_supply>; + clocks = <&ref_clk>; + clock-names = "mclk"; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml new file mode 100644 index 000000000..340be256f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/adi,adis16460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADIS16460 and similar IMUs + +maintainers: + - Dragos Bogdan <dragos.bogdan@analog.com> + +description: | + Analog Devices ADIS16460 and similar IMUs + https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16460.pdf + +properties: + compatible: + enum: + - adi,adis16460 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + imu@0 { + compatible = "adi,adis16460"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml new file mode 100644 index 000000000..79fba1508 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADIS16475 and similar IMUs + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices ADIS16475 and similar IMUs + https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf + +properties: + compatible: + enum: + - adi,adis16475-1 + - adi,adis16475-2 + - adi,adis16475-3 + - adi,adis16477-1 + - adi,adis16477-2 + - adi,adis16477-3 + - adi,adis16470 + - adi,adis16465-1 + - adi,adis16465-2 + - adi,adis16465-3 + - adi,adis16467-1 + - adi,adis16467-2 + - adi,adis16467-3 + - adi,adis16500 + - adi,adis16505-1 + - adi,adis16505-2 + - adi,adis16505-3 + - adi,adis16507-1 + - adi,adis16507-2 + - adi,adis16507-3 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 2000000 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-gpios: + description: + Must be the device tree identifier of the RESET pin. If specified, + it will be asserted during driver probe. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,sync-mode: + description: + Configures the device SYNC pin. The following modes are supported + 0 - output_sync + 1 - direct_sync + 2 - scaled_sync + 3 - pulse_sync + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + + adi,scaled-output-hz: + description: + This property must be present if the clock mode is scaled-sync through + clock-names property. In this mode, the input clock can have a range + of 1Hz to 128HZ which must be scaled to originate an allowable sample + rate. This property specifies that rate. + minimum: 1900 + maximum: 2100 + +required: + - compatible + - reg + - interrupts + - spi-cpha + - spi-cpol + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,adis16500 + - adi,adis16505-1 + - adi,adis16505-2 + - adi,adis16505-3 + - adi,adis16507-1 + - adi,adis16507-2 + - adi,adis16507-3 + + then: + properties: + adi,sync-mode: + minimum: 0 + maximum: 2 + + - if: + properties: + adi,sync-mode: + enum: [1, 2, 3] + + then: + dependencies: + adi,sync-mode: [ clocks ] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adis16475: adis16475-3@0 { + compatible = "adi,adis16475-3"; + reg = <0>; + spi-cpha; + spi-cpol; + spi-max-frequency = <2000000>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt new file mode 100644 index 000000000..cd903a1d8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt @@ -0,0 +1,86 @@ + +Analog Devices ADIS16480 and similar IMUs + +Required properties for the ADIS16480: + +- compatible: Must be one of + * "adi,adis16375" + * "adi,adis16480" + * "adi,adis16485" + * "adi,adis16488" + * "adi,adis16490" + * "adi,adis16495-1" + * "adi,adis16495-2" + * "adi,adis16495-3" + * "adi,adis16497-1" + * "adi,adis16497-2" + * "adi,adis16497-3" +- reg: SPI chip select number for the device +- spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt +- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt +- spi-cpol: See Documentation/devicetree/bindings/spi/spi-bus.txt +- interrupts: interrupt mapping for IRQ, accepted values are: + * IRQF_TRIGGER_RISING + * IRQF_TRIGGER_FALLING + +Optional properties: + +- interrupt-names: Data ready line selection. Valid values are: + * DIO1 + * DIO2 + * DIO3 + * DIO4 + If this field is left empty, DIO1 is assigned as default data ready + signal. +- reset-gpios: must be the device tree identifier of the RESET pin. As the line + is active low, it should be marked GPIO_ACTIVE_LOW. +- clocks: phandle to the external clock. Should be set according to + "clock-names". + If this field is left empty together with the "clock-names" field, then + the internal clock is used. +- clock-names: The name of the external clock to be used. Valid values are: + * sync: In sync mode, the internal clock is disabled and the frequency + of the external clock signal establishes therate of data + collection and processing. See Fig 14 and 15 in the datasheet. + The clock-frequency must be: + * 3000 to 4500 Hz for adis1649x devices. + * 700 to 2400 Hz for adis1648x devices. + * pps: In Pulse Per Second (PPS) Mode, the rate of data collection and + production is equal to the product of the external clock + frequency and the scale factor in the SYNC_SCALE register, see + Table 154 in the datasheet. + The clock-frequency must be: + * 1 to 128 Hz for adis1649x devices. + * This mode is not supported by adis1648x devices. + If this field is left empty together with the "clocks" field, then the + internal clock is used. +- adi,ext-clk-pin: The DIOx line to be used as an external clock input. + Valid values are: + * DIO1 + * DIO2 + * DIO3 + * DIO4 + Each DIOx pin supports only one function at a time (data ready line + selection or external clock input). When a single pin has two + two assignments, the enable bit for the lower priority function + automatically resets to zero (disabling the lower priority function). + Data ready has highest priority. + If this field is left empty, DIO2 is assigned as default external clock + input pin. + +Example: + + imu@0 { + compatible = "adi,adis16495-1"; + reg = <0>; + spi-max-frequency = <3200000>; + spi-cpol; + spi-cpha; + interrupts = <25 IRQF_TRIGGER_FALLING>; + interrupt-parent = <&gpio>; + interrupt-names = "DIO2"; + clocks = <&adis16495_sync>; + clock-names = "sync"; + adi,ext-clk-pin = "DIO1"; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml new file mode 100644 index 000000000..6e73cd889 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI160 + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope and externally + connectable Magnetometer + https://www.bosch-sensortec.com/bst/products/all_products/bmi160 + +properties: + compatible: + const: bosch,bmi160 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + enum: + - INT1 + - INT2 + description: | + set to "INT1" if INT1 pin should be used as interrupt input, set + to "INT2" if INT2 pin should be used instead + + drive-open-drain: + description: | + set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. + + vdd-supply: + description: provide VDD power to the sensor. + + vddio-supply: + description: provide VDD IO power to the sensor. + + mount-matrix: + description: an optional 3x3 mounting rotation matrix + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + // Example for I2C + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bmi160@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + }; + - | + // Example for SPI + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + bmi160@0 { + compatible = "bosch,bmi160"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt new file mode 100644 index 000000000..f2f64749e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -0,0 +1,67 @@ +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device + +http://www.invensense.com/mems/gyro/mpu6050.html + +Required properties: + - compatible : should be one of + "invensense,mpu6000" + "invensense,mpu6050" + "invensense,mpu6500" + "invensense,mpu6515" + "invensense,mpu9150" + "invensense,mpu9250" + "invensense,mpu9255" + "invensense,icm20608" + "invensense,icm20609" + "invensense,icm20689" + "invensense,icm20602" + "invensense,icm20690" + "invensense,iam20680" + - reg : the I2C address of the sensor + - interrupts: interrupt mapping for IRQ. It should be configured with flags + IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt client node + bindings. + +Optional properties: + - vdd-supply: regulator phandle for VDD supply + - vddio-supply: regulator phandle for VDDIO supply + - mount-matrix: an optional 3x3 mounting rotation matrix + - i2c-gate node. These devices also support an auxiliary i2c bus. This is + simple enough to be described using the i2c-gate binding. See + i2c/i2c-gate.txt for more details. + +Example: + mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ + }; + + + mpu9250@68 { + compatible = "invensense,mpu9250"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ax8975@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml new file mode 100644 index 000000000..4c1c083d0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: InvenSense ICM-426xx Inertial Measurement Unit + +maintainers: + - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> + +description: | + 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis + accelerometer. + + It has a configurable host interface that supports I3C, I2C and SPI serial + communication, features a 2kB FIFO and 2 programmable interrupts with + ultra-low-power wake-on-motion support to minimize system power consumption. + + Other industry-leading features include InvenSense on-chip APEX Motion + Processing engine for gesture recognition, activity classification, and + pedometer, along with programmable digital filters, and an embedded + temperature sensor. + + https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf + +properties: + compatible: + enum: + - invensense,icm42600 + - invensense,icm42602 + - invensense,icm42605 + - invensense,icm42622 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + drive-open-drain: + type: boolean + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + spi-max-frequency: true + spi-cpha: true + spi-cpol: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + icm42605@68 { + compatible = "invensense,icm42605"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + icm42602@0 { + compatible = "invensense,icm42602"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml new file mode 100644 index 000000000..479e7065d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/nxp,fxos8700.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FXOS8700 Inertial Measurement Unit + +maintainers: + - Robert Jones <rjones@gateworks.com> + +description: | + Accelerometer and magnetometer combo device with an i2c and SPI interface. + https://www.nxp.com/products/sensors/motion-sensors/6-axis/digital-motion-sensor-3d-accelerometer-2g-4g-8g-plus-3d-magnetometer:FXOS8700CQ + +properties: + compatible: + enum: + - nxp,fxos8700 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + fxos8700@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + fxos8700@0 { + compatible = "nxp,fxos8700"; + reg = <0>; + + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt new file mode 100644 index 000000000..cef4bc16f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -0,0 +1,48 @@ +* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors + +Required properties: +- compatible: must be one of: + "st,lsm6ds3" + "st,lsm6ds3h" + "st,lsm6dsl" + "st,lsm6dsm" + "st,ism330dlc" + "st,lsm6dso" + "st,asm330lhh" + "st,lsm6dsox" + "st,lsm6dsr" + "st,lsm6ds3tr-c" + "st,ism330dhcx" + "st,lsm9ds1-imu" + "st,lsm6ds0" + "st,lsm6dsrx" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- st,drdy-int-pin: the pin on the package that will be used to signal + "data ready" (valid values: 1 or 2). +- st,pullups : enable/disable internal i2c controller pullup resistors. +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + (This binding is taken from pinctrl/pinctrl-bindings.txt) + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. +- wakeup-source: Enables wake up of host system on event. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +lsm6dsm@6b { + compatible = "st,lsm6dsm"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml new file mode 100644 index 000000000..d7d14f2f1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/adux1020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADUX1020 Photometric sensor + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Photometric sensor over an i2c interface. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf + +properties: + compatible: + enum: + - adi,adux1020 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + adux1020@64 { + compatible = "adi,adux1020"; + reg = <0x64>; + interrupt-parent = <&msmgpio>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml new file mode 100644 index 000000000..0e8cd0275 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor + +maintainers: + - Christian Eggers <ceggers@arri.de> + +description: | + XYZ True Color Sensor with I2C Interface + https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + +properties: + compatible: + enum: + - ams,as73211 + + reg: + description: + I2C address of the device (0x74...0x77). + maxItems: 1 + + interrupts: + description: + Interrupt specifier for the READY interrupt generated by the device. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + as73211@74 { + compatible = "ams,as73211"; + reg = <0x74>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_color_sensor>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */ + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml new file mode 100644 index 000000000..60e76bc03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS TAOS TSL2563 ambient light sensor + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Ambient light sensor with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2560 + - amstaos,tsl2561 + - amstaos,tsl2562 + - amstaos,tsl2563 + + reg: + maxItems: 1 + + amstaos,cover-comp-gain: + description: Multiplier for gain compensation + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 16] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2563"; + reg = <0x29>; + amstaos,cover-comp-gain = <16>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt new file mode 100644 index 000000000..3aa6db3ee --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt @@ -0,0 +1,21 @@ +* Avago APDS9300 ambient light sensor + +https://www.avagotech.com/docs/AV02-1077EN + +Required properties: + + - compatible : should be "avago,apds9300" + - reg : the I2C address of the sensor + +Optional properties: + + - interrupts : interrupt mapping for GPIO IRQ + +Example: + +apds9300@39 { + compatible = "avago,apds9300"; + reg = <0x39>; + interrupt-parent = <&gpio2>; + interrupts = <29 8>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt new file mode 100644 index 000000000..c53ddb81c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt @@ -0,0 +1,21 @@ +* Avago APDS9960 gesture/RGB/ALS/proximity sensor + +https://www.avagotech.com/docs/AV02-4191EN + +Required properties: + + - compatible: must be "avago,apds9960" + - reg: the I2c address of the sensor + - interrupts : the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + +Example: + +apds9960@39 { + compatible = "avago,apds9960"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <16 1>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml new file mode 100644 index 000000000..1a88b3c25 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/bh1750.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BH1750 ambient light sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Ambient light sensor with an i2c interface. + +properties: + compatible: + enum: + - rohm,bh1710 + - rohm,bh1715 + - rohm,bh1721 + - rohm,bh1750 + - rohm,bh1751 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@23 { + compatible = "rohm,bh1750"; + reg = <0x23>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/cm3605.txt b/Documentation/devicetree/bindings/iio/light/cm3605.txt new file mode 100644 index 000000000..56331a79f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/cm3605.txt @@ -0,0 +1,41 @@ +Capella Microsystems CM3605 +Ambient Light and Short Distance Proximity Sensor + +The CM3605 is an entirely analog part which however require quite a bit of +software logic to interface a host operating system. + +This ALS and proximity sensor was one of the very first deployed in mobile +handsets, notably it is used in the very first Nexus One Android phone from +2010. + +Required properties: +- compatible: must be: "capella,cm3605" +- aset-gpios: GPIO line controlling the ASET line (drive low + to activate the ALS, should be flagged GPIO_ACTIVE_LOW) +- interrupts: the IRQ line (such as a GPIO) that is connected to + the POUT (proximity sensor out) line. The edge detection must + be set to IRQ_TYPE_EDGE_BOTH so as to detect movements toward + and away from the proximity sensor. +- io-channels: the ADC channel used for converting the voltage from + AOUT to a digital representation. +- io-channel-names: must be "aout" + +Optional properties: +- vdd-supply: regulator supplying VDD power to the component. +- capella,aset-resistance-ohms: the sensitivity calibration resistance, + in Ohms. Valid values are: 50000, 100000, 300000 and 600000, + as these are the resistance values that we are supplied with + calibration curves for. If not supplied, 100 kOhm will be assumed + but it is strongly recommended to supply this. + +Example: + +cm3605 { + compatible = "capella,cm3605"; + vdd-supply = <&foo_reg>; + aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>; + capella,aset-resistance-ohms = <100000>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&adc 0x01>; + io-channel-names = "aout"; +}; diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt b/Documentation/devicetree/bindings/iio/light/cm36651.txt new file mode 100644 index 000000000..c03e19db4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/cm36651.txt @@ -0,0 +1,26 @@ +* Capella CM36651 I2C Proximity and Color Light sensor + +Required properties: +- compatible: must be "capella,cm36651" +- reg: the I2C address of the device +- interrupts: interrupt-specifier for the sole interrupt + generated by the device +- vled-supply: regulator for the IR LED. IR_LED is a part + of the cm36651 for proximity detection. + As covered in ../../regulator/regulator.txt + +Example: + + i2c_cm36651: i2c-gpio { + /* ... */ + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 0>; + vled-supply = <&ps_als_reg>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml new file mode 100644 index 000000000..a3a979553 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3010 sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3010"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml new file mode 100644 index 000000000..8249be99c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/dynaimage,al3320a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3320A sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3320a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3320a"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt new file mode 100644 index 000000000..9231c8231 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt @@ -0,0 +1,21 @@ +* Sharp GP2AP020A00F I2C Proximity/ALS sensor + +The proximity detector sensor requires power supply +for its built-in led. It is also defined by this binding. + +Required properties: + + - compatible : should be "sharp,gp2ap020a00f" + - reg : the I2C slave address of the light sensor + - interrupts : interrupt specifier for the sole interrupt generated + by the device + - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt + +Example: + +gp2ap020a00f@39 { + compatible = "sharp,gp2ap020a00f"; + reg = <0x39>; + interrupts = <2 0>; + vled-supply = <...>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml new file mode 100644 index 000000000..0ea278b07 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/isl29018.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient and infrared light sensing with proximity detection over an i2c + interface. + + https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf + +properties: + compatible: + enum: + - isil,isl29018 + - isil,isl29023 + - isil,isl29035 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/max44009.txt b/Documentation/devicetree/bindings/iio/light/max44009.txt new file mode 100644 index 000000000..4a98848e3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/max44009.txt @@ -0,0 +1,24 @@ +* MAX44009 Ambient Light Sensor + +Required properties: + +- compatible: should be "maxim,max44009" +- reg: the I2C address of the device (default is <0x4a>) + +Optional properties: + +- interrupts: interrupt mapping for GPIO IRQ. Should be configured with + IRQ_TYPE_EDGE_FALLING. + +Refer to interrupt-controller/interrupts.txt for generic interrupt client +node bindings. + +Example: + +light-sensor@4a { + compatible = "maxim,max44009"; + reg = <0x4a>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml new file mode 100644 index 000000000..fe7bfe1ad --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/noa1305.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor NOA1305 Ambient Light Sensor + +maintainers: + - Martyn Welch <martyn.welch@collabora.com> + +description: | + Ambient sensing with an i2c interface. + + https://www.onsemi.com/pub/Collateral/NOA1305-D.PDF + +properties: + compatible: + enum: + - onnn,noa1305 + + reg: + maxItems: 1 + + vin-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + light@39 { + compatible = "onnn,noa1305"; + reg = <0x39>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt new file mode 100644 index 000000000..9e6f2998e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt @@ -0,0 +1,25 @@ +* Texas Instruments OPT3001 Ambient Light Sensor + +The driver supports interrupt-driven and interrupt-less operation, depending +on whether an interrupt property has been populated into the DT. Note that +the optional generation of IIO events on rising/falling light threshold changes +requires the use of interrupts. Without interrupts, only the simple reading +of the current light value is supported through the IIO API. + +https://www.ti.com/product/opt3001 + +Required properties: + - compatible: should be "ti,opt3001" + - reg: the I2C address of the sensor + +Optional properties: + - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) + +Example: + +opt3001@44 { + compatible = "ti,opt3001"; + reg = <0x44>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt b/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt new file mode 100644 index 000000000..46957997f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/renesas,isl29501.txt @@ -0,0 +1,13 @@ +* ISL29501 Time-of-flight sensor. + +Required properties: + + - compatible : should be "renesas,isl29501" + - reg : the I2C address of the sensor + +Example: + +isl29501@57 { + compatible = "renesas,isl29501"; + reg = <0x57>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml new file mode 100644 index 000000000..f8a932be0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Proximity and ambient light sensor with IR LED for the proximity + sensing and an analog output for light intensity. The ambient light + sensor output is not available on the GP2AP002S00F variant. + +properties: + compatible: + enum: + - sharp,gp2ap002a00f + - sharp,gp2ap002s00f + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: an interrupt for proximity, usually a GPIO line + + vdd-supply: + description: VDD power supply a phandle to a regulator + + vio-supply: + description: VIO power supply a phandle to a regulator + + io-channels: + maxItems: 1 + description: ALSOUT ADC channel to read the ambient light + + io-channel-names: + const: alsout + + sharp,proximity-far-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "far" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "far away" object in front of the sensor. + + sharp,proximity-close-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "close" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "close" object in front of the sensor. + +required: + - compatible + - reg + - interrupts + - sharp,proximity-far-hysteresis + - sharp,proximity-close-hysteresis + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd_regulator>; + vio-supply = <&vio_regulator>; + io-channels = <&adc_channel>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml new file mode 100644 index 000000000..f92bf7b2b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/stk33xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Sensortek STK33xx I2C Ambient Light and Proximity sensor + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Ambient light and proximity sensor over an i2c interface. + +properties: + compatible: + enum: + - sensortek,stk3310 + - sensortek,stk3311 + - sensortek,stk3335 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + stk3310@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml new file mode 100644 index 000000000..7b92ba8cb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2580 + - amstaos,tsl2581 + - amstaos,tsl2583 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2581"; + reg = <0x29>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml new file mode 100644 index 000000000..d81229857 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing and proximity detection with an i2c interface. + https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf + +properties: + compatible: + enum: + - amstaos,tsl2571 + - amstaos,tsl2671 + - amstaos,tmd2671 + - amstaos,tsl2771 + - amstaos,tmd2771 + - amstaos,tsl2572 + - amstaos,tsl2672 + - amstaos,tmd2672 + - amstaos,tsl2772 + - amstaos,tmd2772 + - avago,apds9930 + + reg: + maxItems: 1 + + amstaos,proximity-diodes: + description: Proximity diodes to enable + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + interrupts: + maxItems: 1 + + led-max-microamp: + description: Current for the proximity LED + enum: + - 13000 + - 25000 + - 50000 + - 100000 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@39 { + compatible = "amstaos,tsl2772"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + amstaos,proximity-diodes = <0>; + led-max-microamp = <100000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt new file mode 100644 index 000000000..a61979997 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt @@ -0,0 +1,45 @@ +* UPISEMI us5182d I2C ALS and Proximity sensor + +Required properties: +- compatible: must be "upisemi,usd5182" +- reg: the I2C address of the device + +Optional properties: +- upisemi,glass-coef: glass attenuation factor - compensation factor of + resolution 1000 for material transmittance. + +- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc + counts) corresponding to every scale. + +- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4 + fractional bits - Q4.4) applied when light > threshold + +- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4 + fractional bits - Q4.4) applied when light < threshold + +- upisemi,continuous: This chip has two power modes: one-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The one-shot mode is + more power-friendly but the continuous mode may be more + reliable. If this property is specified the continuous + mode will be used instead of the default one-shot one for + raw reads. + +If the optional properties are not specified these factors will default to the +values in the below example. +The glass-coef defaults to no compensation for the covering material. +The threshold array defaults to experimental values that work with US5182D +sensor on evaluation board - roughly between 12-32 lux. +There will be no dark-gain compensation by default when ALS > thresh +(0 * dark-gain), and a 1.35 compensation factor when ALS < thresh. + +Example: + + usd5182@39 { + compatible = "upisemi,usd5182"; + reg = <0x39>; + upisemi,glass-coef = < 1000 >; + upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>; + upisemi,upper-dark-gain = /bits/ 8 <0x00>; + upisemi,lower-dark-gain = /bits/ 8 <0x16>; + }; diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt new file mode 100644 index 000000000..043c139d9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt @@ -0,0 +1,22 @@ +* ST UVIS25 uv sensor + +Required properties: +- compatible: should be "st,uvis25" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +uvis25@47 { + compatible = "st,uvis25"; + reg = <0x47>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt new file mode 100644 index 000000000..c07c7f052 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt @@ -0,0 +1,18 @@ +VISHAY VCNL4035 - Ambient Light and proximity sensor + +Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf + +Required properties: + + -compatible: should be "vishay,vcnl4035" + -reg: I2C address of the sensor, should be 0x60 + -interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +light-sensor@60 { + compatible = "vishay,vcnl4035"; + reg = <0x60>; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml new file mode 100644 index 000000000..fb19a2d7a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/veml6030.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VEML6030 Ambient Light Sensor (ALS) + +maintainers: + - Rishi Gupta <gupt21@gmail.com> + +description: | + Bindings for the ambient light sensor veml6030 from Vishay + Semiconductors over an i2c interface. + + Irrespective of whether interrupt is used or not, application + can get the ALS and White channel reading from IIO raw interface. + + If the interrupts are used, application will receive an IIO event + whenever configured threshold is crossed. + + Specifications about the sensor can be found at: + https://www.vishay.com/docs/84366/veml6030.pdf + +properties: + compatible: + enum: + - vishay,veml6030 + + reg: + description: + I2C address of the device. + enum: + - 0x10 # ADDR pin pulled down + - 0x48 # ADDR pin pulled up + + interrupts: + description: + interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW. + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@10 { + compatible = "vishay,veml6030"; + reg = <0x10>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml new file mode 100644 index 000000000..4d1a225e8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VISHAY VCNL4000 ambient light and proximity sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + +description: | + Ambient light sensing with proximity detection over an i2c + interface. + +allOf: + - $ref: ../common.yaml# + +properties: + compatible: + enum: + - vishay,vcnl4000 + - vishay,vcnl4010 + - vishay,vcnl4020 + - vishay,vcnl4040 + - vishay,vcnl4200 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + proximity-near-level: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@51 { + compatible = "vishay,vcnl4200"; + reg = <0x51>; + proximity-near-level = <220>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt new file mode 100644 index 000000000..fb9137d85 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt @@ -0,0 +1,15 @@ +STMicro VL6180 - ALS, range and proximity sensor + +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf + +Required properties: + + -compatible: should be "st,vl6180" + -reg: the I2C address of the sensor + +Example: + +vl6180@29 { + compatible = "st,vl6180"; + reg = <0x29>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt new file mode 100644 index 000000000..7f06eff3b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt @@ -0,0 +1,31 @@ +* Asahi Kasei AK8974 magnetometer sensor + +Required properties: + +- compatible: + * "asahi-kasei,ak8974" + * "alps,hscdtd008a" +- reg : the I2C address of the magnetometer + +Optional properties: + +- avdd-supply: regulator supply for the analog voltage + (see regulator/regulator.txt) +- dvdd-supply: regulator supply for the digital voltage + (see regulator/regulator.txt) +- interrupts: data ready (DRDY) and interrupt (INT1) lines + from the chip, the DRDY interrupt must be placed first. + The interrupts can be triggered on rising or falling + edges alike. +- mount-matrix: an optional 3x3 mounting rotation matrix + +Example: + +ak8974@f { + compatible = "asahi-kasei,ak8974"; + reg = <0x0f>; + avdd-supply = <&foo_reg>; + dvdd-supply = <&bar_reg>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>, + <1 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml new file mode 100644 index 000000000..a25590a16 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8975.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AsahiKASEI AK8975 magnetometer sensor + +maintainers: + - Jonathan Albrieux <jonathan.albrieux@gmail.com> + +properties: + compatible: + oneOf: + - enum: + - asahi-kasei,ak8975 + - asahi-kasei,ak8963 + - asahi-kasei,ak09911 + - asahi-kasei,ak09912 + - enum: + - ak8975 + - ak8963 + - ak09911 + - ak09912 + deprecated: true + + reg: + maxItems: 1 + + gpios: + maxItems: 1 + description: | + AK8975 has a "Data ready" pin (DRDY) which informs that data + is ready to be read and is possible to listen on it. If used, + this should be active high. Prefer interrupt over this. + + interrupts: + maxItems: 1 + description: interrupt for DRDY pin. Triggered on rising edge. + + vdd-supply: + description: | + an optional regulator that needs to be on to provide VDD power to + the sensor. + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + + reset-gpios: + description: | + an optional pin needed for AK09911 to set the reset state. This should + be usually active low + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&ldo_3v3_gnss>; + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ + }; + }; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt new file mode 100644 index 000000000..22912e43b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt @@ -0,0 +1,25 @@ +* Bosch BMC150 magnetometer sensor + +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf + +Required properties: + + - compatible : should be one of: + "bosch,bmc150_magn" + "bosch,bmc156_magn" + "bosch,bmm150" + "bosch,bmm150_magn" (DEPRECATED, use bosch,bmm150) + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupts : interrupt mapping for GPIO IRQ + +Example: + +bmc150_magn@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + interrupt-parent = <&gpio1>; + interrupts = <0 1>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt new file mode 100644 index 000000000..8e191eef0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt @@ -0,0 +1,21 @@ +* Honeywell HMC5843 magnetometer sensor + +Required properties: + + - compatible : should be "honeywell,hmc5843" + Other models which are supported with driver are: + "honeywell,hmc5883" + "honeywell,hmc5883l" + "honeywell,hmc5983" + - reg : the I2C address of the magnetometer - typically 0x1e + +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +hmc5843@1e { + compatible = "honeywell,hmc5843" + reg = <0x1e>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt new file mode 100644 index 000000000..bdd40bcaa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt @@ -0,0 +1,27 @@ +* FREESCALE MAG3110 magnetometer sensor + +Required properties: + + - compatible : should be "fsl,mag3110" + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the sensor's IO. + +Example: + +magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt new file mode 100644 index 000000000..a01235c7f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt @@ -0,0 +1,13 @@ +* MEMSIC MMC35240 magnetometer sensor + +Required properties: + + - compatible : should be "memsic,mmc35240" + - reg : the I2C address of the magnetometer + +Example: + +mmc35240@30 { + compatible = "memsic,mmc35240"; + reg = <0x30>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt new file mode 100644 index 000000000..497c932e9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt @@ -0,0 +1,20 @@ +* PNI RM3100 3-axis magnetometer sensor + +Required properties: + +- compatible : should be "pni,rm3100" +- reg : the I2C address or SPI chip select number of the sensor. + +Optional properties: + +- interrupts: data ready (DRDY) from the chip. + The interrupts can be triggered on level high. + +Example: + +rm3100: rm3100@20 { + compatible = "pni,rm3100"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/iio/mount-matrix.txt b/Documentation/devicetree/bindings/iio/mount-matrix.txt new file mode 100644 index 000000000..c3344ab50 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/mount-matrix.txt @@ -0,0 +1,203 @@ +For discussion. Unclear are: +* is the definition of +/- values practical or counterintuitive? +* are the definitions unambiguous and easy to follow? +* are the examples correct? +* should we have HOWTO engineer a correct matrix for a new device (without comparing to a different one)? + +==== + + +Mounting matrix + +The mounting matrix is a device tree property used to orient any device +that produce three-dimensional data in relation to the world where it is +deployed. + +The purpose of the mounting matrix is to translate the sensor frame of +reference into the device frame of reference using a translation matrix as +defined in linear algebra. + +The typical usecase is that where a component has an internal representation +of the (x,y,z) triplets, such as different registers to read these coordinates, +and thus implying that the component should be mounted in a certain orientation +relative to some specific device frame of reference. + +For example a device with some kind of screen, where the user is supposed to +interact with the environment using an accelerometer, gyroscope or magnetometer +mounted on the same chassis as this screen, will likely take the screen as +reference to (x,y,z) orientation, with (x,y) corresponding to these axes on the +screen and (z) being depth, the axis perpendicular to the screen. + +For a screen you probably want (x) coordinates to go from negative on the left +to positive on the right, (y) from negative on the bottom to positive on top +and (z) depth to be negative under the screen and positive in front of it, +toward the face of the user. + +A sensor can be mounted in any angle along the axes relative to the frame of +reference. This means that the sensor may be flipped upside-down, left-right, +or tilted at any angle relative to the frame of reference. + +Another frame of reference is how the device with its sensor relates to the +external world, the environment where the device is deployed. Usually the data +from the sensor is used to figure out how the device is oriented with respect +to this world. When using the mounting matrix, the sensor and device orientation +becomes identical and we can focus on the data as it relates to the surrounding +world. + +Device-to-world examples for some three-dimensional sensor types: + +- Accelerometers have their world frame of reference toward the center of + gravity, usually to the core of the planet. A reading of the (x,y,z) values + from the sensor will give a projection of the gravity vector through the + device relative to the center of the planet, i.e. relative to its surface at + this point. Up and down in the world relative to the device frame of + reference can thus be determined. and users would likely expect a value of + 9.81 m/s^2 upwards along the (z) axis, i.e. out of the screen when the device + is held with its screen flat on the planets surface and 0 on the other axes, + as the gravity vector is projected 1:1 onto the sensors (z)-axis. + + If you tilt the device, the g vector virtually coming out of the display + is projected onto the (x,y) plane of the display panel. + + Example: + + ^ z: +g ^ z: > 0 + ! /! + ! x=y=0 / ! x: > 0 + +--------+ +--------+ + ! ! ! ! + +--------+ +--------+ + ! / + ! / + v v + center of center of + gravity gravity + + + If the device is tilted to the left, you get a positive x value. If you point + its top towards surface, you get a negative y axis. + + (---------) + ! ! y: -g + ! ! ^ + ! ! ! + ! ! + ! ! x: +g <- z: +g -> x: -g + ! 1 2 3 ! + ! 4 5 6 ! ! + ! 7 8 9 ! v + ! * 0 # ! y: +g + (---------) + + +- Magnetometers (compasses) have their world frame of reference relative to the + geomagnetic field. The system orientation vis-a-vis the world is defined with + respect to the local earth geomagnetic reference frame where (y) is in the + ground plane and positive towards magnetic North, (x) is in the ground plane, + perpendicular to the North axis and positive towards the East and (z) is + perpendicular to the ground plane and positive upwards. + + + ^^^ North: y > 0 + + (---------) + ! ! + ! ! + ! ! + ! ! > + ! ! > North: x > 0 + ! 1 2 3 ! > + ! 4 5 6 ! + ! 7 8 9 ! + ! * 0 # ! + (---------) + + Since the geomagnetic field is not uniform this definition fails if we come + closer to the poles. + + Sensors and driver can not and should not take care of this because there + are complex calculations and empirical data to be taken care of. We leave + this up to user space. + + The definition we take: + + If the device is placed at the equator and the top is pointing north, the + display is readable by a person standing upright on the earth surface, this + defines a positive y value. + + +- Gyroscopes detects the movement relative the device itself. The angular + velocity is defined as orthogonal to the plane of rotation, so if you put the + device on a flat surface and spin it around the z axis (such as rotating a + device with a screen lying flat on a table), you should get a negative value + along the (z) axis if rotated clockwise, and a positive value if rotated + counter-clockwise according to the right-hand rule. + + + (---------) y > 0 + ! ! v---\ + ! ! + ! ! + ! ! <--\ + ! ! ! z > 0 + ! 1 2 3 ! --/ + ! 4 5 6 ! + ! 7 8 9 ! + ! * 0 # ! + (---------) + + +So unless the sensor is ideally mounted, we need a means to indicate the +relative orientation of any given sensor of this type with respect to the +frame of reference. + +To achieve this, use the device tree property "mount-matrix" for the sensor. + +This supplies a 3x3 rotation matrix in the strict linear algebraic sense, +to orient the senor axes relative to a desired point of reference. This means +the resulting values from the sensor, after scaling to proper units, should be +multiplied by this matrix to give the proper vectors values in three-dimensional +space, relative to the device or world point of reference. + +For more information, consult: +https://en.wikipedia.org/wiki/Rotation_matrix + +The mounting matrix has the layout: + + (mxx, myx, mzx) + (mxy, myy, mzy) + (mxz, myz, mzz) + +Values are intended to be multiplied as: + + x' = mxx * x + myx * y + mzx * z + y' = mxy * x + myy * y + mzy * z + z' = mxz * x + myz * y + mzz * z + +It is represented as an array of strings containing the real values for +producing the transformation matrix. + +Examples: + +Identity matrix (nothing happens to the coordinates, which means the device was +mechanically mounted in an ideal way and we need no transformation): + +mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + +The sensor is mounted 30 degrees (Pi/6 radians) tilted along the X axis, so we +compensate by performing a -30 degrees rotation around the X axis: + +mount-matrix = "1", "0", "0", + "0", "0.866", "0.5", + "0", "-0.5", "0.866"; + +The sensor is flipped 180 degrees (Pi radians) around the Z axis, i.e. mounted +upside-down: + +mount-matrix = "0.998", "0.054", "0", + "-0.054", "0.998", "0", + "0", "0", "1"; + +???: this does not match "180 degrees" - factors indicate ca. 3 degrees compensation diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt new file mode 100644 index 000000000..89647d714 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt @@ -0,0 +1,39 @@ +I/O channel multiplexer bindings + +If a multiplexer is used to select which hardware signal is fed to +e.g. an ADC channel, these bindings describe that situation. + +Required properties: +- compatible : "io-channel-mux" +- io-channels : Channel node of the parent channel that has multiplexed + input. +- io-channel-names : Should be "parent". +- #address-cells = <1>; +- #size-cells = <0>; +- mux-controls : Mux controller node to use for operating the mux +- channels : List of strings, labeling the mux controller states. + +For each non-empty string in the channels property, an io-channel will +be created. The number of this io-channel is the same as the index into +the list of strings in the channels property, and also matches the mux +controller state. The mux controller state is described in +../mux/mux-controller.txt + +Example: + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + + channels = "sync", "in", "system-regulator"; + }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt new file mode 100644 index 000000000..f9b2eef94 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt @@ -0,0 +1,27 @@ +* Analog Devices AD5272 digital potentiometer + +The node for this device must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Must be one of the following, depending on the model: + adi,ad5272-020 + adi,ad5272-050 + adi,ad5272-100 + adi,ad5274-020 + adi,ad5274-100 + +Optional properties: + - reset-gpios: GPIO specification for the RESET input. This is an + active low signal to the AD5272. + +Example: +ad5272: potentiometer@2f { + reg = <0x2F>; + compatible = "adi,ad5272-020"; + reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt new file mode 100644 index 000000000..df77bf552 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/ds1803.txt @@ -0,0 +1,21 @@ +* Maxim Integrated DS1803 digital potentiometer driver + +The node for this driver must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "maxim,ds1803-010", + "maxim,ds1803-050", + "maxim,ds1803-100" + +Example: +ds1803: ds1803@1 { + reg = <0x28>; + compatible = "maxim,ds1803-010"; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml new file mode 100644 index 000000000..5082f919d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/potentiometer/max5432.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX5432-MAX5435 Digital Potentiometers + +maintainers: + - Martin Kaiser <martin@kaiser.cx> + +description: | + Maxim Integrated MAX5432-MAX5435 Digital Potentiometers connected via I2C + + Datasheet: + https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf + +properties: + compatible: + enum: + - maxim,max5432 + - maxim,max5433 + - maxim,max5434 + - maxim,max5435 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + max5434@28 { + compatible = "maxim,max5434"; + reg = <0x28>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt new file mode 100644 index 000000000..6a91b106e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/max5481.txt @@ -0,0 +1,23 @@ +* Maxim Linear-Taper Digital Potentiometer MAX5481-MAX5484 + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "maxim,max5481" + "maxim,max5482" + "maxim,max5483" + "maxim,max5484" + +Example: +max548x: max548x@0 { + compatible = "maxim,max5482"; + spi-max-frequency = <7000000>; + reg = <0>; /* chip-select */ +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt new file mode 100644 index 000000000..4f245e846 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt @@ -0,0 +1,28 @@ +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer + +Datasheet publicly available at: +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp41010" + "microchip,mcp41050" + "microchip,mcp41100" + "microchip,mcp42010" + "microchip,mcp42050" + "microchip,mcp42100" + +Example: +potentiometer@0 { + compatible = "microchip,mcp41010"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt new file mode 100644 index 000000000..3ccba16f7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt @@ -0,0 +1,84 @@ +* Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer + driver + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp4131-502" + "microchip,mcp4131-103" + "microchip,mcp4131-503" + "microchip,mcp4131-104" + "microchip,mcp4132-502" + "microchip,mcp4132-103" + "microchip,mcp4132-503" + "microchip,mcp4132-104" + "microchip,mcp4141-502" + "microchip,mcp4141-103" + "microchip,mcp4141-503" + "microchip,mcp4141-104" + "microchip,mcp4142-502" + "microchip,mcp4142-103" + "microchip,mcp4142-503" + "microchip,mcp4142-104" + "microchip,mcp4151-502" + "microchip,mcp4151-103" + "microchip,mcp4151-503" + "microchip,mcp4151-104" + "microchip,mcp4152-502" + "microchip,mcp4152-103" + "microchip,mcp4152-503" + "microchip,mcp4152-104" + "microchip,mcp4161-502" + "microchip,mcp4161-103" + "microchip,mcp4161-503" + "microchip,mcp4161-104" + "microchip,mcp4162-502" + "microchip,mcp4162-103" + "microchip,mcp4162-503" + "microchip,mcp4162-104" + "microchip,mcp4231-502" + "microchip,mcp4231-103" + "microchip,mcp4231-503" + "microchip,mcp4231-104" + "microchip,mcp4232-502" + "microchip,mcp4232-103" + "microchip,mcp4232-503" + "microchip,mcp4232-104" + "microchip,mcp4241-502" + "microchip,mcp4241-103" + "microchip,mcp4241-503" + "microchip,mcp4241-104" + "microchip,mcp4242-502" + "microchip,mcp4242-103" + "microchip,mcp4242-503" + "microchip,mcp4242-104" + "microchip,mcp4251-502" + "microchip,mcp4251-103" + "microchip,mcp4251-503" + "microchip,mcp4251-104" + "microchip,mcp4252-502" + "microchip,mcp4252-103" + "microchip,mcp4252-503" + "microchip,mcp4252-104" + "microchip,mcp4261-502" + "microchip,mcp4261-103" + "microchip,mcp4261-503" + "microchip,mcp4261-104" + "microchip,mcp4262-502" + "microchip,mcp4262-103" + "microchip,mcp4262-503" + "microchip,mcp4262-104" + +Example: +mcp4131: mcp4131@0 { + compatible = "mcp4131-502"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt new file mode 100644 index 000000000..f3ab02b0d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt @@ -0,0 +1,33 @@ +* Texas Instruments LMP91000 series of potentiostats + +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf + +Required properties: + + - compatible: should be one of the following: + "ti,lmp91000" + "ti,lmp91002" + - reg: the I2C address of the device + - io-channels: the phandle of the iio provider + + - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this + needs to be set to signal that an external resistor value is being used. + +Optional properties: + + - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance + amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms. + + - ti,rload-ohm: ohm value of the internal resistor load applied to the gas + sensor. Must be 10, 33, 50, or 100 (default) ohms. + +Example: + +lmp91000@48 { + compatible = "ti,lmp91000"; + reg = <0x48>; + ti,tia-gain-ohm = <7500>; + ti,rload = <100>; + io-channels = <&adc>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml new file mode 100644 index 000000000..be2be4b55 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: All Sensors DLH series low voltage digital pressure sensors + +maintainers: + - Tomislav Denis <tomislav.denis@avl.com> + +description: | + Bindings for the All Sensors DLH series pressure sensors. + + Specifications about the sensors can be found at: + https://www.allsensors.com/cad/DS-0355_Rev_B.PDF + +properties: + compatible: + enum: + - asc,dlhl60d + - asc,dlhl60g + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + description: interrupt mapping for EOC(data ready) pin + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pressure@29 { + compatible = "asc,dlhl60d"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml new file mode 100644 index 000000000..49257f925 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BMP085/BMP180/BMP280/BME280 pressure iio sensors + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Pressure, temperature and humidity iio sensors with i2c and spi interfaces + + Specifications about the sensor can be found at: + https://www.bosch-sensortec.com/bst/products/all_products/bmp180 + https://www.bosch-sensortec.com/bst/products/all_products/bmp280 + https://www.bosch-sensortec.com/bst/products/all_products/bme280 + +properties: + compatible: + enum: + - bosch,bmp085 + - bosch,bmp180 + - bosch,bmp280 + - bosch,bme280 + + reg: + maxItems: 1 + + vddd-supply: + description: + digital voltage regulator (see regulator/regulator.txt) + + vdda-supply: + description: + analog voltage regulator (see regulator/regulator.txt) + + reset-gpios: + description: + A GPIO line handling reset of the sensor. As the line is active low, + it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt) + maxItems: 1 + + interrupts: + description: + interrupt mapping for IRQ (BMP085 only) + maxItems: 1 + +required: + - compatible + - vddd-supply + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt new file mode 100644 index 000000000..831dbee7a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -0,0 +1,17 @@ +HopeRF HP03 digital pressure/temperature sensors + +Required properties: +- compatible: must be "hoperf,hp03" +- xclr-gpio: must be device tree identifier of the XCLR pin. + The XCLR pin is a reset of the ADC in the chip, + it must be pulled HI before the conversion and + readout of the value from the ADC registers and + pulled LO afterward. + +Example: + +hp03@77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpio = <&portc 0 0x0>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt new file mode 100644 index 000000000..17bca866c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt @@ -0,0 +1,19 @@ +MEAS ms5611 family pressure sensors + +Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. + +Required properties: +- compatible: "meas,ms5611" or "meas,ms5607" +- reg: the I2C address or SPI chip select the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. + +Example: + +ms5607@77 { + compatible = "meas,ms5607"; + reg = <0x77>; + vdd-supply = <&ldo_3v3_gnss>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5637.txt b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt new file mode 100644 index 000000000..1f43ffa06 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt @@ -0,0 +1,17 @@ +* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor + +Required properties: + + -compatible: should be one of the following + meas,ms5637 + meas,ms5805 + meas,ms5837 + meas,ms8607-temppressure + -reg: I2C address of the sensor + +Example: + +ms5637@76 { + compatible = "meas,ms5637"; + reg = <0x76>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt new file mode 100644 index 000000000..a36ab3e0c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt @@ -0,0 +1,29 @@ +Murata ZPA2326 pressure sensor + +Pressure sensor from Murata with SPI and I2C bus interfaces. + +Required properties: +- compatible: "murata,zpa2326" +- reg: the I2C address or SPI chip select the device will respond to + +Recommended properties for SPI bus usage: +- spi-max-frequency: maximum SPI bus frequency as documented in + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- vref-supply: an optional regulator that needs to be on to provide VREF + power to the sensor +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor +- interrupts: interrupt mapping for IRQ as documented in + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example: + +zpa2326@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + interrupt-parent = <&gpio>; + interrupts = <12>; + vdd-supply = <&ldo_1v8_gnss>; +}; diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt new file mode 100644 index 000000000..849115585 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -0,0 +1,34 @@ +Austrian Microsystems AS3935 Franklin lightning sensor device driver + +Required properties: + - compatible: must be "ams,as3935" + - reg: SPI chip select number for the device + - spi-max-frequency: specifies maximum SPI clock frequency + - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI + slave node bindings. + - interrupts : the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + +Optional properties: + - ams,tuning-capacitor-pf: Calibration tuning capacitor stepping + value 0 - 120pF. This will require using the calibration data from + the manufacturer. + - ams,nflwdth: Set the noise and watchdog threshold register on + startup. This will need to set according to the noise from the + MCU board, and possibly the local environment. Refer to the + datasheet for the threshold settings. + +Example: + +as3935@0 { + compatible = "ams,as3935"; + reg = <0>; + spi-max-frequency = <400000>; + spi-cpha; + interrupt-parent = <&gpio1>; + interrupts = <16 1>; + ams,tuning-capacitor-pf = <80>; + ams,nflwdth = <0x44>; +}; diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml new file mode 100644 index 000000000..ce7952798 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/devantech-srf04.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Devantech SRF04 and Maxbotix mb1000 ultrasonic range finder + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Bit-banging driver using two GPIOs: + - trigger-gpio is raised by the driver to start sending out an ultrasonic + burst + - echo-gpio is held high by the sensor after sending ultrasonic burst + until it is received once again + + Specifications about the devices can be found at: + https://www.robot-electronics.co.uk/htm/srf04tech.htm + + https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf + +properties: + compatible: + enum: + - devantech,srf04 + - maxbotix,mb1000 + - maxbotix,mb1010 + - maxbotix,mb1020 + - maxbotix,mb1030 + - maxbotix,mb1040 + + trig-gpios: + description: + Definition of the GPIO for the triggering (output) + This GPIO is set for about 10 us by the driver to tell the device it + should initiate the measurement cycle. + See Documentation/devicetree/bindings/gpio/gpio.txt for information + on how to specify a consumer gpio. + maxItems: 1 + + echo-gpios: + description: + Definition of the GPIO for the echo (input) + This GPIO is set by the device as soon as an ultrasonic burst is sent + out and reset when the first echo is received. + Thus this GPIO is set while the ultrasonic waves are doing one round + trip. + It needs to be an GPIO which is able to deliver an interrupt because + the time between two interrupts is measured in the driver. + maxItems: 1 + + power-gpios: + description: + Definition of the GPIO for power management of connected peripheral + (output). + This GPIO can be used by the external hardware for power management. + When the device gets suspended it's switched off and when it resumes + it's switched on again. After some period of inactivity the driver + get suspended automatically (autosuspend feature). + maxItems: 1 + + startup-time-ms: + description: + This is the startup time the device needs after a resume to be up and + running. + minimum: 0 + maximum: 1000 + default: 100 + +required: + - compatible + - trig-gpios + - echo-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + proximity { + compatible = "devantech,srf04"; + trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml new file mode 100644 index 000000000..3eac248f2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/maxbotix,mb1232.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MaxBotix I2CXL-MaxSonar ultrasonic distance sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb1202, + mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface + for ranging + + Specifications about the devices can be found at: + https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf + +properties: + compatible: + enum: + - maxbotix,mb1202 + - maxbotix,mb1212 + - maxbotix,mb1222 + - maxbotix,mb1232 + - maxbotix,mb1242 + - maxbotix,mb7040 + - maxbotix,mb7137 + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt used to announce the preceding reading request has finished + and that data is available. If no interrupt is specified the device + driver falls back to wait a fixed amount of time until data can be + retrieved. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@70 { + compatible = "maxbotix,mb1232"; + reg = <0x70>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml new file mode 100644 index 000000000..ada55f186 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parallax PING))) and LaserPING range finder + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Bit-banging driver using one GPIO: + - ping-gpios is raised by the driver to start measurement + - direction of ping-gpio is then switched into input with an interrupt + for receiving distance value as PWM signal + + Specifications about the devices can be found at: + http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf + http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf + +properties: + compatible: + enum: + - parallax,ping + - parallax,laserping + + ping-gpios: + description: + Definition of the GPIO for the triggering and echo (output and input) + This GPIO is set for about 5 us by the driver to tell the device it + should initiate the measurement cycle. Afterwards the GPIO is switched + to input direction with an interrupt. The device sets it and the + length of the input signal corresponds to the measured distance. + It needs to be an GPIO which is able to deliver an interrupt because + the time between two interrupts is measured in the driver. + See Documentation/devicetree/bindings/gpio/gpio.txt for information + on how to specify a consumer gpio. + maxItems: 1 + +required: + - compatible + - ping-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + proximity { + compatible = "parallax,laserping"; + ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml new file mode 100644 index 000000000..5739074d3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech's SX9310 capacitive proximity sensor + +maintainers: + - Daniel Campello <campello@chromium.org> + +description: | + Semtech's SX9310/SX9311 capacitive proximity/button solution. + + Specifications about the devices can be found at: + https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310 + +properties: + compatible: + enum: + - semtech,sx9310 + - semtech,sx9311 + + reg: + maxItems: 1 + + interrupts: + description: + The sole interrupt generated by the device used to announce the + preceding reading request has finished and that data is + available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: + description: Main power supply + + svdd-supply: + description: Host interface power supply + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@28 { + compatible = "semtech,sx9310"; + reg = <0x28>; + interrupt-parent = <&pio>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>; + vdd-supply = <&pp3300_a>; + svdd-supply = <&pp1800_prox>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt new file mode 100644 index 000000000..c54455db3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt @@ -0,0 +1,23 @@ +Semtech's SX9500 capacitive proximity button device driver + +Required properties: + - compatible: must be "semtech,sx9500" + - reg: i2c address where to find the device + - interrupts : the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + +Optional properties: + - reset-gpios: Reference to the GPIO connected to the device's active + low reset pin. + +Example: + +sx9500@28 { + compatible = "semtech,sx9500"; + reg = <0x28>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml new file mode 100644 index 000000000..fbd3a2e32 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Integrated Proximity Sensor With Infrared Emitter + +maintainers: + - Ivan Mikhaylov <i.mikhaylov@yadro.com> + +description: | + The VCNL3020 is a fully integrated proximity sensor. Fully integrated means + that the infrared emitter is included in the package. It has 16-bit + resolution. It includes a signal processing IC and features standard I2C + communication interface. It features an interrupt function. + + Specifications about the devices can be found at: + https://www.vishay.com/docs/84150/vcnl3020.pdf + +properties: + compatible: + enum: + - vishay,vcnl3020 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + vishay,led-current-microamp: + description: + The driver current for the LED used in proximity sensing. + enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, + 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, + 180000, 190000, 200000] + default: 20000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + proximity@13 { + compatible = "vishay,vcnl3020"; + reg = <0x13>; + vishay,led-current-microamp = <200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt new file mode 100644 index 000000000..dfe00eb96 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt @@ -0,0 +1,18 @@ +ST VL53L0X ToF ranging sensor + +Required properties: + - compatible: must be "st,vl53l0x" + - reg: i2c address where to find the device + +Optional properties: + - interrupts: Interrupt for notifying that new measurement is ready. + If no interrupt is specified, polling is used. + +Example: + +vl53l0x@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt new file mode 100644 index 000000000..477d41fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt @@ -0,0 +1,31 @@ +Analog Devices AD2S90 Resolver-to-Digital Converter + +https://www.analog.com/en/products/ad2s90.html + +Required properties: + - compatible: should be "adi,ad2s90" + - reg: SPI chip select number for the device + - spi-max-frequency: set maximum clock frequency, must be 830000 + - spi-cpol and spi-cpha: + Either SPI mode (0,0) or (1,1) must be used, so specify none or both of + spi-cpha, spi-cpol. + +See for more details: + Documentation/devicetree/bindings/spi/spi-bus.txt + +Note about max frequency: + Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns + delay is expected between the application of a logic LO to CS and the + application of SCLK, as also specified. And since the delay is not + implemented in the spi code, to satisfy it, SCLK's period should be at most + 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives + roughly 830000Hz. + +Example: +resolver@0 { + compatible = "adi,ad2s90"; + reg = <0>; + spi-max-frequency = <830000>; + spi-cpol; + spi-cpha; +}; diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt b/Documentation/devicetree/bindings/iio/sensorhub.txt new file mode 100644 index 000000000..b6ac0457d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/sensorhub.txt @@ -0,0 +1,24 @@ +Samsung Sensorhub driver + +Sensorhub is a MCU which manages several sensors and also plays the role +of a virtual sensor device. + +Required properties: +- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat" +- spi-max-frequency: max SPI clock frequency +- interrupts: communication interrupt +- ap-mcu-gpios: [out] ap to sensorhub line - used during communication +- mcu-ap-gpios: [in] sensorhub to ap - used during communication +- mcu-reset-gpios: [out] sensorhub reset + +Example: + + shub_spi: shub { + compatible = "samsung,sensorhub-rinato"; + spi-max-frequency = <5000000>; + interrupt-parent = <&gpx0>; + interrupts = <2 0>; + ap-mcu-gpios = <&gpx0 0 0>; + mcu-ap-gpios = <&gpx0 4 0>; + mcu-reset-gpios = <&gpx0 5 0>; + }; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt new file mode 100644 index 000000000..3213599c5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -0,0 +1,82 @@ +STMicroelectronics MEMS sensors + +The STMicroelectronics sensor devices are pretty straight-forward I2C or +SPI devices, all sharing the same device tree descriptions no matter what +type of sensor it is. + +Required properties: +- compatible: see the list of valid compatible strings below +- reg: the I2C or SPI address the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. +- vddio-supply: an optional regulator that needs to be on to provide the + VDD IO power to the sensor. +- st,drdy-int-pin: the pin on the package that will be used to signal + "data ready" (valid values: 1 or 2). This property is not configurable + on all sensors. +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt) + This is a boolean property. + +Sensors may also have applicable pin control settings, those use the +standard bindings from pinctrl/pinctrl-bindings.txt. + +Valid compatible strings: + +Accelerometers: +- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel) +- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel) +- st,lis3lv02dl-accel +- st,lsm303dlh-accel +- st,lsm303dlhc-accel +- st,lis3dh-accel +- st,lsm330d-accel +- st,lsm330dl-accel +- st,lsm330dlc-accel +- st,lis331dl-accel +- st,lis331dlh-accel +- st,lsm303dl-accel +- st,lsm303dlm-accel +- st,lsm330-accel +- st,lsm303agr-accel +- st,lis2dh12-accel +- st,h3lis331dl-accel +- st,lng2dm-accel +- st,lis3l02dq +- st,lis2dw12 +- st,lis3dhh +- st,lis3de +- st,lis2de12 +- st,lis2hh12 + +Gyroscopes: +- st,l3g4200d-gyro +- st,lsm330d-gyro +- st,lsm330dl-gyro +- st,lsm330dlc-gyro +- st,l3gd20-gyro +- st,l3gd20h-gyro +- st,l3g4is-gyro +- st,lsm330-gyro +- st,lsm9ds0-gyro + +Magnetometers: +- st,lsm303agr-magn +- st,lsm303dlh-magn +- st,lsm303dlhc-magn +- st,lsm303dlm-magn +- st,lis3mdl-magn +- st,lis2mdl +- st,lsm9ds1-magn + +Pressure sensors: +- st,lps001wp-press +- st,lps25h-press +- st,lps331ap-press +- st,lps22hb-press +- st,lps33hw +- st,lps35hw +- st,lps22hh diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml new file mode 100644 index 000000000..0f79d9a01 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -0,0 +1,466 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2983 Multi-sensor Temperature system + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + +properties: + compatible: + enum: + - adi,ltc2983 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + adi,mux-delay-config-us: + description: + The LTC2983 performs 2 or 3 internal conversion cycles per temperature + result. Each conversion cycle is performed with different excitation and + input multiplexer configurations. Prior to each conversion, these + excitation circuits and input switch configurations are changed and an + internal 1ms delay ensures settling prior to the conversion cycle in most + cases. An extra delay can be configured using this property. The value is + rounded to nearest 100us. + maximum: 255 + + adi,filter-notch-freq: + description: + Set's the default setting of the digital filter. The default is + simultaneous 50/60Hz rejection. + 0 - 50/60Hz rejection + 1 - 60Hz rejection + 2 - 50Hz rejection + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "@([1-9]|1[0-9]|20)$": + type: object + + properties: + reg: + description: + The channel number. It can be connected to one of the 20 channels of + the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Identifies the type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + + "^thermocouple@": + type: object + description: + Represents a thermocouple sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: | + 1 - Type J Thermocouple + 2 - Type K Thermocouple + 3 - Type E Thermocouple + 4 - Type N Thermocouple + 5 - Type R Thermocouple + 6 - Type S Thermocouple + 7 - Type T Thermocouple + 8 - Type B Thermocouple + 9 - Custom Thermocouple + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 9 + + adi,single-ended: + description: + Boolean property which set's the thermocouple as single-ended. + type: boolean + + adi,sensor-oc-current-microamp: + description: + This property set's the pulsed current value applied during + open-circuit detect. + enum: [10, 100, 500, 1000] + + adi,cold-junction-handle: + description: + Phandle which points to a sensor object responsible for measuring + the thermocouple cold junction temperature. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,custom-thermocouple: + description: + This is a table, where each entry should be a pair of + voltage(mv)-temperature(K). The entries must be given in nv and uK + so that, the original values must be multiplied by 1000000. For + more details look at table 69 and 70. + Note should be signed, but dtc doesn't currently maintain the + sign. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + minItems: 2 + maxItems: 2 + + "^diode@": + type: object + description: + Represents a diode sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: Identifies the sensor as a diode. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 28 + + adi,single-ended: + description: Boolean property which set's the diode as single-ended. + type: boolean + + adi,three-conversion-cycles: + description: + Boolean property which set's three conversion cycles removing + parasitic resistance effects between the LTC2983 and the diode. + type: boolean + + adi,average-on: + description: + Boolean property which enables a running average of the diode + temperature reading. This reduces the noise when the diode is used + as a cold junction temperature element on an isothermal block + where temperatures change slowly. + type: boolean + + adi,excitation-current-microamp: + description: + This property controls the magnitude of the excitation current + applied to the diode. Depending on the number of conversions + cycles, this property will assume different predefined values on + each cycle. Just set the value of the first cycle (1l). + enum: [10, 20, 40, 80] + + adi,ideal-factor-value: + description: + This property sets the diode ideality factor. The real value must + be multiplied by 1000000 to remove the fractional part. For more + information look at table 20 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + + "^rtd@": + type: object + description: + Represents a rtd sensor which is connected to one of the device channels. + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: | + 10 - RTD PT-10 + 11 - RTD PT-50 + 12 - RTD PT-100 + 13 - RTD PT-200 + 14 - RTD PT-500 + 15 - RTD PT-1000 + 16 - RTD PT-1000 (0.00375) + 17 - RTD NI-120 + 18 - RTD Custom + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 10 + maximum: 18 + + adi,rsense-handle: + description: + Phandle pointing to a rsense object associated with this RTD. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,number-of-wires: + description: + Identifies the number of wires used by the RTD. Setting this + property to 5 means 4 wires with Kelvin Rsense. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] + + adi,rsense-share: + description: + Boolean property which enables Rsense sharing, where one sense + resistor is used for multiple 2-, 3-, and/or 4-wire RTDs. + type: boolean + + adi,current-rotate: + description: + Boolean property which enables excitation current rotation to + automatically remove parasitic thermocouple effects. Note that + this property is not allowed for 2- and 3-wire RTDs. + type: boolean + + adi,excitation-current-microamp: + description: + This property controls the magnitude of the excitation current + applied to the RTD. + enum: [5, 10, 25, 50, 100, 250, 500, 1000] + + adi,rtd-curve: + description: + This property set the RTD curve used and the corresponding + Callendar-VanDusen constants. Look at table 30 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + + adi,custom-rtd: + description: + This is a table, where each entry should be a pair of + resistance(ohm)-temperature(K). The entries added here are in uohm + and uK. For more details values look at table 74 and 75. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + items: + minItems: 3 + maxItems: 64 + items: + minItems: 2 + maxItems: 2 + + required: + - adi,rsense-handle + + dependencies: + adi,current-rotate: [ "adi,rsense-share" ] + + "^thermistor@": + type: object + description: + Represents a thermistor sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: + 19 - Thermistor 44004/44033 2.252kohm at 25°C + 20 - Thermistor 44005/44030 3kohm at 25°C + 21 - Thermistor 44007/44034 5kohm at 25°C + 22 - Thermistor 44006/44031 10kohm at 25°C + 23 - Thermistor 44008/44032 30kohm at 25°C + 24 - Thermistor YSI 400 2.252kohm at 25°C + 25 - Thermistor Spectrum 1003k 1kohm + 26 - Thermistor Custom Steinhart-Hart + 27 - Custom Thermistor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 19 + maximum: 27 + + adi,rsense-handle: + description: + Phandle pointing to a rsense object associated with this + thermistor. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,single-ended: + description: + Boolean property which set's the thermistor as single-ended. + type: boolean + + adi,rsense-share: + description: + Boolean property which enables Rsense sharing, where one sense + resistor is used for multiple thermistors. Note that this property + is ignored if adi,single-ended is set. + type: boolean + + adi,current-rotate: + description: + Boolean property which enables excitation current rotation to + automatically remove parasitic thermocouple effects. + type: boolean + + adi,excitation-current-nanoamp: + description: + This property controls the magnitude of the excitation current + applied to the thermistor. Value 0 set's the sensor in auto-range + mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] + + adi,custom-thermistor: + description: + This is a table, where each entry should be a pair of + resistance(ohm)-temperature(K). The entries added here are in uohm + and uK only for custom thermistors. For more details look at table + 78 and 79. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + minItems: 2 + maxItems: 2 + + adi,custom-steinhart: + description: + Steinhart-Hart coefficients are also supported and can + be programmed into the device memory using this property. For + Steinhart sensors the coefficients are given in the raw + format. Look at table 82 for more information. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 + + required: + - adi,rsense-handle + + dependencies: + adi,current-rotate: [ "adi,rsense-share" ] + + "^adc@": + type: object + description: Represents a channel which is being used as a direct adc. + + properties: + adi,sensor-type: + description: Identifies the sensor as a direct adc. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 30 + + adi,single-ended: + description: Boolean property which set's the adc as single-ended. + type: boolean + + "^rsense@": + type: object + description: + Represents a rsense which is connected to one of the device channels. + Rsense are used by thermistors and RTD's. + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: Identifies the sensor as a rsense. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 29 + + adi,rsense-val-milli-ohms: + description: + Sets the value of the sense resistor. Look at table 20 of the + datasheet for information. + + required: + - adi,rsense-val-milli-ohms + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + sensor_ltc2983: ltc2983@0 { + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-oc-current-microamp = <10>; + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-steinhart = <0x00F371EC 0x12345678 + 0x2C0F8733 0x10018C66 0xA0FEACCD + 0x90021D99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,single-ended; + adi,custom-thermocouple = /bits/ 64 + <(-50220000) 0>, + <(-30200000) 99100000>, + <(-5300000) 135400000>, + <0 273150000>, + <40200000 361200000>, + <55300000 522100000>, + <88300000 720300000>, + <132200000 811200000>, + <188700000 922500000>, + <460400000 1000000000>; //10 pairs + }; + + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/max31856.txt b/Documentation/devicetree/bindings/iio/temperature/max31856.txt new file mode 100644 index 000000000..06ab43bb4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/max31856.txt @@ -0,0 +1,24 @@ +Maxim MAX31856 thermocouple support + +https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf + +Optional property: + - thermocouple-type: Type of thermocouple (THERMOCOUPLE_TYPE_K if + omitted). Supported types are B, E, J, K, N, R, S, T. + +Required properties: + - compatible: must be "maxim,max31856" + - reg: SPI chip select number for the device + - spi-max-frequency: As per datasheet max. supported freq is 5000000 + - spi-cpha: must be defined for max31856 to enable SPI mode 1 + + Refer to spi/spi-bus.txt for generic SPI slave bindings. + + Example: + temp-sensor@0 { + compatible = "maxim,max31856"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + thermocouple-type = <THERMOCOUPLE_TYPE_K>; + }; diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt new file mode 100644 index 000000000..bb85cd0e0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt @@ -0,0 +1,24 @@ +Maxim thermocouple support + +* https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf +* https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf + +Required properties: + + - compatible: must be "maxim,max6675" or one of the following: + "maxim,max31855k", "maxim,max31855j", "maxim,max31855n", + "maxim,max31855s", "maxim,max31855t", "maxim,max31855e", + "maxim,max31855r"; the generic "max,max31855" is deprecated. + - reg: SPI chip select number for the device + - spi-max-frequency: must be 4300000 + - spi-cpha: must be defined for max6675 to enable SPI mode 1 + + Refer to spi/spi-bus.txt for generic SPI slave bindings. + +Example: + + max31855@0 { + compatible = "maxim,max31855k"; + reg = <0>; + spi-max-frequency = <4300000>; + }; diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt new file mode 100644 index 000000000..9be57b036 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt @@ -0,0 +1,24 @@ +* Melexis MLX90614 contactless IR temperature sensor + +http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx + +Required properties: + + - compatible: should be "melexis,mlx90614" + - reg: the I2C address of the sensor + +Optional properties: + + - wakeup-gpios: device tree identifier of the GPIO connected to the SDA line + to hold low in order to wake up the device. In normal operation, the + GPIO is set as input and will not interfere in I2C communication. There + is no need for a GPIO driving the SCL line. If no GPIO is given, power + management is disabled. + +Example: + +mlx90614@5a { + compatible = "melexis,mlx90614"; + reg = <0x5a>; + wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt new file mode 100644 index 000000000..0b0581200 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt @@ -0,0 +1,28 @@ +* Melexis MLX90632 contactless Infra Red temperature sensor + +Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632 + +There are various applications for the Infra Red contactless temperature sensor +and MLX90632 is most suitable for consumer applications where measured object +temperature is in range between -20 to 200 degrees Celsius with relative error +of measurement below 1 degree Celsius in object temperature range for +industrial applications. Since it can operate and measure ambient temperature +in range of -20 to 85 degrees Celsius it is suitable also for outdoor use. + +Be aware that electronics surrounding the sensor can increase ambient +temperature. MLX90632 can be calibrated to reduce the housing effect via +already existing EEPROM parameters. + +Since measured object emissivity effects Infra Red energy emitted, emissivity +should be set before requesting the object temperature. + +Required properties: + - compatible: should be "melexis,mlx90632" + - reg: the I2C address of the sensor (default 0x3a) + +Example: + +mlx90632@3a { + compatible = "melexis,mlx90632"; + reg = <0x3a>; +}; diff --git a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt new file mode 100644 index 000000000..8f339cab7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt @@ -0,0 +1,7 @@ +If the temperature sensor device can be configured to use some specific +thermocouple type, you can use the defined types provided in the file +"include/dt-bindings/iio/temperature/thermocouple.h". + +Property: +thermocouple-type: A single cell representing the type of the thermocouple + used by the device. diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt new file mode 100644 index 000000000..da0af234a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt @@ -0,0 +1,33 @@ +* TI TMP007 - IR thermopile sensor with integrated math engine + +Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf + +Required properties: + + - compatible: should be "ti,tmp007" + - reg: the I2C address of the sensor (changeable via ADR pins) + ------------------------------ + |ADR1 | ADR0 | Device Address| + ------------------------------ + 0 0 0x40 + 0 1 0x41 + 0 SDA 0x42 + 0 SCL 0x43 + 1 0 0x44 + 1 1 0x45 + 1 SDA 0x46 + 1 SCL 0x47 + +Optional properties: + + - interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +tmp007@40 { + compatible = "ti,tmp007"; + reg = <0x40>; + interrupt-parent = <&gpio0>; + interrupts = <5 0x08>; +}; + diff --git a/Documentation/devicetree/bindings/iio/temperature/tsys01.txt b/Documentation/devicetree/bindings/iio/temperature/tsys01.txt new file mode 100644 index 000000000..0d5cc5595 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/tsys01.txt @@ -0,0 +1,19 @@ +* TSYS01 - Measurement Specialties temperature sensor + +Required properties: + + - compatible: should be "meas,tsys01" + - reg: I2C address of the sensor (changeable via CSB pin) + + ------------------------ + | CSB | Device Address | + ------------------------ + 1 0x76 + 0 0x77 + +Example: + +tsys01@76 { + compatible = "meas,tsys01"; + reg = <0x76>; +}; |