summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml')
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
new file mode 100644
index 000000000..7a6ec1f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD253 one-wire backlight
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ The Kinetic Technologies KTD253 is a white LED backlight that is
+ controlled by a single GPIO line. If you just turn on the backlight
+ it goes to maximum backlight then you can set the level of backlight
+ using pulses on the enable wire. This is sometimes referred to as
+ "expresswire".
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ const: kinetic,ktd253
+
+ enable-gpios:
+ description: GPIO to use to enable/disable and dim the backlight.
+ maxItems: 1
+
+ default-brightness: true
+ max-brightness: true
+
+required:
+ - compatible
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ backlight {
+ compatible = "kinetic,ktd253";
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ default-brightness = <13>;
+ };