1 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
new file mode 100644
index 000000000..ff3eafc5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
@@ -0,0 +1,72 @@
+NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+The HSP modules are used for the processors to share resources and communicate
+together. It provides a set of hardware synchronization primitives for
+interprocessor communication. So the interprocessor communication (IPC)
+protocols can use hardware synchronization primitives, when operating between
+two processors not in an SMP relationship.
+
+The features that HSP supported are shared mailboxes, shared semaphores,
+arbitrated semaphores and doorbells.
+
+Required properties:
+- name : Should be hsp
+- compatible
+    Array of strings.
+    one of:
+    - "nvidia,tegra186-hsp"
+    - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"
+- reg : Offset and length of the register set for the device.
+- interrupt-names
+    Array of strings.
+    Contains a list of names for the interrupts described by the interrupt
+    property. May contain the following entries, in any order:
+    - "doorbell"
+    - "sharedN", where 'N' is a number from zero up to the number of
+      external interrupts supported by the HSP instance minus one.
+    Users of this binding MUST look up entries in the interrupt property
+    by name, using this interrupt-names property to do so.
+- interrupts
+    Array of interrupt specifiers.
+    Must contain one entry per entry in the interrupt-names property,
+    in a matching order.
+- #mbox-cells : Should be 2.
+
+The mbox specifier of the "mboxes" property in the client node should contain
+two cells. The first cell determines the HSP type and the second cell is used
+to identify the mailbox that the client is going to use.
+
+For doorbells, the second cell specifies the index of the doorbell to use.
+
+For shared mailboxes, the second cell is composed of two fields:
+- bits 31..24:
+    A bit mask of flags that further specify how the shared mailbox will be
+    used. Valid flags are:
+    - bit 31:
+        Defines the direction of the mailbox. If set, the mailbox will be used
+        as a producer (i.e. used to send data). If cleared, the mailbox is the
+        consumer of data sent by a producer.
+
+- bits 23.. 0:
+    The index of the shared mailbox to use. The number of available mailboxes
+    may vary by instance of the HSP block and SoC generation.
+
+The following file contains definitions that can be used to construct mailbox
+specifiers:
+
+    <dt-bindings/mailbox/tegra186-hsp.h>
+
+Example:
+
+hsp_top0: hsp@3c00000 {
+	compatible = "nvidia,tegra186-hsp";
+	reg = <0x0 0x03c00000 0x0 0xa0000>;
+	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "doorbell";
+	#mbox-cells = <2>;
+};
+
+client {
+	...
+	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>;
+};