summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/samsung-mipi-csis.txt')
-rw-r--r--Documentation/devicetree/bindings/media/samsung-mipi-csis.txt81
1 files changed, 81 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
new file mode 100644
index 000000000..a4149c943
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
@@ -0,0 +1,81 @@
+Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
+-------------------------------------------------------------
+
+Required properties:
+
+- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
+ "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
+ "samsung,exynos4212-csis" for Exynos4212/Exynos4412,
+ "samsung,exynos5250-csis" for Exynos5250;
+- reg : offset and length of the register set for the device;
+- interrupts : should contain MIPI CSIS interrupt; the format of the
+ interrupt specifier depends on the interrupt controller;
+- bus-width : maximum number of data lanes supported (SoC specific);
+- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
+- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V);
+- clocks : list of clock specifiers, corresponding to entries in
+ clock-names property;
+- clock-names : must contain "csis", "sclk_csis" entries, matching entries
+ in the clocks property.
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+ value when this property is not specified is 166 MHz;
+- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
+ external clock from CMU will be used, or the bus clock if
+ if it's not specified.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those nodes.
+
+port node
+---------
+
+- reg : (required) must be 3 for camera C input (CSIS0) or 4 for
+ camera D input (CSIS1);
+
+endpoint node
+-------------
+
+- data-lanes : (required) an array specifying active physical MIPI-CSI2
+ data input lanes and their mapping to logical lanes; the
+ array's content is unused, only its length is meaningful;
+
+- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
+
+
+Example:
+
+ reg0: regulator@0 {
+ };
+
+ reg1: regulator@1 {
+ };
+
+/* SoC properties */
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x1000>;
+ interrupts = <0 78 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+/* Board properties */
+
+ csis_0: csis@11880000 {
+ clock-frequency = <166000000>;
+ vddio-supply = <&reg0>;
+ vddcore-supply = <&reg1>;
+ port {
+ reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
+ csis0_ep: endpoint {
+ remote-endpoint = <...>;
+ data-lanes = <1>, <2>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };