summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/memory-controllers/fsl
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt29
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt82
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml72
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml51
4 files changed, 234 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
new file mode 100644
index 000000000..dde6d8370
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
@@ -0,0 +1,29 @@
+Freescale DDR memory controller
+
+Properties:
+
+- compatible : Should include "fsl,chip-memory-controller" where
+ chip is the processor (bsc9132, mpc8572 etc.), or
+ "fsl,qoriq-memory-controller".
+- reg : Address and size of DDR controller registers
+- interrupts : Error interrupt of DDR controller
+- little-endian : Specifies little-endian access to registers
+ If omitted, big-endian will be used.
+
+Example 1:
+
+ memory-controller@2000 {
+ compatible = "fsl,bsc9132-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 1 8>;
+ };
+
+
+Example 2:
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.7",
+ "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
new file mode 100644
index 000000000..89427b018
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
@@ -0,0 +1,82 @@
+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+ flash controller can be found in the IFC_REV register at
+ offset zero.
+
+- #address-cells : Should be either two or three. The first cell is the
+ chipselect number, and the remaining cells are the
+ offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+ can be.
+- reg : Offset and length of the register set for the device
+- interrupts: IFC may have one or two interrupts. If two interrupt
+ specifiers are present, the first is the "common"
+ interrupt (CM_EVTER_STAT), and the second is the NAND
+ interrupt (NAND_EVTER_STAT). If there is only one,
+ that interrupt reports both types of event.
+
+- little-endian : If this property is absent, the big-endian mode will
+ be in use as default for registers.
+
+- ranges : Each range corresponds to a single chipselect, and covers
+ the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+ ifc@ffe1e000 {
+ compatible = "fsl,ifc", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+ interrupts = <16 2 19 2>;
+ little-endian;
+
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xffa00000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* 32MB for user data */
+ reg = <0x0 0x02000000>;
+ label = "NOR Data";
+ };
+ };
+
+ flash@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x000001f>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
new file mode 100644
index 000000000..445e46fed
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/imx8m-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8M DDR Controller
+
+maintainers:
+ - Leonard Crestez <leonard.crestez@nxp.com>
+
+description:
+ The DDRC block is integrated in i.MX8M for interfacing with DDR based
+ memories.
+
+ It supports switching between different frequencies at runtime but during
+ this process RAM itself becomes briefly inaccessible so actual frequency
+ switching is implemented by TF-A code which runs from a SRAM area.
+
+ The Linux driver for the DDRC doesn't even map registers (they're included
+ for the sake of "describing hardware"), it mostly just exposes firmware
+ capabilities through standard Linux mechanism like devfreq and OPP tables.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8mn-ddrc
+ - fsl,imx8mm-ddrc
+ - fsl,imx8mq-ddrc
+ - const: fsl,imx8m-ddrc
+
+ reg:
+ maxItems: 1
+ description:
+ Base address and size of DDRC CTL area.
+ This is not currently mapped by the imx8m-ddrc driver.
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: core
+ - const: pll
+ - const: alt
+ - const: apb
+
+ operating-points-v2: true
+ opp-table: true
+
+required:
+ - reg
+ - compatible
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mm-clock.h>
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+ <&clk IMX8MM_DRAM_PLL>,
+ <&clk IMX8MM_CLK_DRAM_ALT>,
+ <&clk IMX8MM_CLK_DRAM_APB>;
+ operating-points-v2 = <&ddrc_opp_table>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
new file mode 100644
index 000000000..71547eee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/mmdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Multi Mode DDR controller (MMDC)
+
+maintainers:
+ - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx6q-mmdc
+ - items:
+ - enum:
+ - fsl,imx6qp-mmdc
+ - fsl,imx6sl-mmdc
+ - fsl,imx6sll-mmdc
+ - fsl,imx6sx-mmdc
+ - fsl,imx6ul-mmdc
+ - fsl,imx7ulp-mmdc
+ - const: fsl,imx6q-mmdc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ memory-controller@21b0000 {
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
+ };
+
+ memory-controller@21b4000 {
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b4000 0x4000>;
+ };