summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt')
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt53
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
new file mode 100644
index 000000000..ae2074184
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -0,0 +1,53 @@
+* BROADCOM BRCMSTB/BMIPS SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-brcmstb driver.
+
+NOTE: The driver disables all UHS speed modes by default and depends
+on Device Tree properties to enable them for SoC/Board combinations
+that support them.
+
+Required properties:
+- compatible: should be one of the following
+ - "brcm,bcm7425-sdhci"
+ - "brcm,bcm7445-sdhci"
+ - "brcm,bcm7216-sdhci"
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+ sdhci@84b0000 {
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ sdhci,auto-cmd12;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b0000 0x260 0x84b0300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x26 0x4>;
+ interrupt-names = "sdio0_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
+ };
+
+ sdhci@84b1000 {
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ supports-cqe;
+ non-removable;
+ bus-width = <0x8>;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b1000 0x260 0x84b1300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x27 0x4>;
+ interrupt-names = "sdio1_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
+ };