summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc')
-rw-r--r--Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml102
-rw-r--r--Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt39
-rw-r--r--Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml70
-rw-r--r--Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt54
-rw-r--r--Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml303
-rw-r--r--Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml106
-rw-r--r--Documentation/devicetree/bindings/mmc/atmel-hsmci.txt73
-rw-r--r--Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt29
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt23
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt21
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt53
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt37
-rw-r--r--Documentation/devicetree/bindings/mmc/cavium-mmc.txt57
-rw-r--r--Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml134
-rw-r--r--Documentation/devicetree/bindings/mmc/davinci_mmc.txt32
-rw-r--r--Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt92
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-esdhc.txt52
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml127
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml53
-rw-r--r--Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt40
-rw-r--r--Documentation/devicetree/bindings/mmc/img-dw-mshc.txt28
-rw-r--r--Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml81
-rw-r--r--Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt73
-rw-r--r--Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt172
-rw-r--r--Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml67
-rw-r--r--Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt29
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-card.txt30
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-controller.yaml394
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml48
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml41
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml66
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt29
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/mmci.txt74
-rw-r--r--Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt30
-rw-r--r--Documentation/devicetree/bindings/mmc/mtk-sd.txt75
-rw-r--r--Documentation/devicetree/bindings/mmc/mxs-mmc.yaml58
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt143
-rw-r--r--Documentation/devicetree/bindings/mmc/orion-sdio.txt16
-rw-r--r--Documentation/devicetree/bindings/mmc/owl-mmc.yaml65
-rw-r--r--Documentation/devicetree/bindings/mmc/pxa-mmc.txt25
-rw-r--r--Documentation/devicetree/bindings/mmc/renesas,mmcif.txt53
-rw-r--r--Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml192
-rw-r--r--Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml125
-rw-r--r--Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt42
-rw-r--r--Documentation/devicetree/bindings/mmc/samsung-sdhci.txt32
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-am654.yaml219
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-atmel.txt33
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-dove.txt14
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt32
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt30
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-msm.txt115
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt20
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-omap.txt36
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml104
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-sirf.txt18
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-spear.txt18
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-sprd.txt67
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-st.txt110
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci.txt13
-rw-r--r--Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt23
-rw-r--r--Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml101
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml66
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml72
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt134
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap.txt26
-rw-r--r--Documentation/devicetree/bindings/mmc/usdhi6rol0.txt39
-rw-r--r--Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt23
-rw-r--r--Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt31
69 files changed, 4830 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
new file mode 100644
index 000000000..e82c9a07b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MMC Controller Device Tree Bindings
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-mmc
+ - const: allwinner,sun5i-a13-mmc
+ - const: allwinner,sun7i-a20-mmc
+ - const: allwinner,sun8i-a83t-emmc
+ - const: allwinner,sun9i-a80-mmc
+ - const: allwinner,sun50i-a64-emmc
+ - const: allwinner,sun50i-a64-mmc
+ - items:
+ - const: allwinner,sun8i-a83t-mmc
+ - const: allwinner,sun7i-a20-mmc
+ - items:
+ - const: allwinner,sun8i-r40-emmc
+ - const: allwinner,sun50i-a64-emmc
+ - items:
+ - const: allwinner,sun8i-r40-mmc
+ - const: allwinner,sun50i-a64-mmc
+ - items:
+ - const: allwinner,sun50i-h5-emmc
+ - const: allwinner,sun50i-a64-emmc
+ - items:
+ - const: allwinner,sun50i-h5-mmc
+ - const: allwinner,sun50i-a64-mmc
+ - items:
+ - const: allwinner,sun50i-h6-emmc
+ - const: allwinner,sun50i-a64-emmc
+ - items:
+ - const: allwinner,sun50i-h6-mmc
+ - const: allwinner,sun50i-a64-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+ - description: Output Clock
+ - description: Sample Clock
+
+ clock-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ - const: ahb
+ - const: mmc
+ - const: output
+ - const: sample
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: ahb
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
new file mode 100644
index 000000000..ccc5358db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
@@ -0,0 +1,39 @@
+Amlogic SD / eMMC controller for S905/GXBB family SoCs
+
+The MMC 5.1 compliant host controller on Amlogic provides the
+interface for SD, eMMC and SDIO devices.
+
+This file documents the properties in addition to those available in
+the MMC core bindings, documented by mmc.txt.
+
+Required properties:
+- compatible : contains one of:
+ - "amlogic,meson-gx-mmc"
+ - "amlogic,meson-gxbb-mmc"
+ - "amlogic,meson-gxl-mmc"
+ - "amlogic,meson-gxm-mmc"
+ - "amlogic,meson-axg-mmc"
+- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
+- clock-names: Should contain the following:
+ "core" - Main peripheral bus clock
+ "clkin0" - Parent clock of internal mux
+ "clkin1" - Other parent clock of internal mux
+ The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
+ clock rate requested by the MMC core.
+- resets : phandle of the internal reset line
+
+Optional properties:
+- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the
+ DRAM memory, like on the G12A dedicated SDIO controller.
+
+Example:
+
+ sd_emmc_a: mmc@70000 {
+ compatible = "amlogic,meson-gxbb-mmc";
+ reg = <0x0 0x70000 0x0 0x2000>;
+ interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ pinctrl-0 = <&emmc_pins>;
+ resets = <&reset RESET_SD_EMMC_A>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
new file mode 100644
index 000000000..60955acb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SDHC controller Device Tree Bindings
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+ The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
+ card interface with 1/4/8-bit bus width.
+ It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,meson8-sdhc
+ - amlogic,meson8b-sdhc
+ - amlogic,meson8m2-sdhc
+ - const: amlogic,meson-mx-sdhc
+
+ reg:
+ minItems: 1
+
+ interrupts:
+ minItems: 1
+
+ clocks:
+ minItems: 5
+
+ clock-names:
+ items:
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+ - const: pclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sdhc: mmc@8e00 {
+ compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+ reg = <0x8e00 0x42>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>,
+ <&fclk_div4>,
+ <&fclk_div3>,
+ <&fclk_div5>,
+ <&sdhc_pclk>;
+ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
new file mode 100644
index 000000000..8765c605e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
@@ -0,0 +1,54 @@
+* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller
+
+The highspeed MMC host controller on Amlogic SoCs provides an interface
+for MMC, SD, SDIO and SDHC types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 2.0.
+
+The hardware provides an internal "mux" which allows up to three slots
+to be controlled. Only one slot can be accessed at a time.
+
+Required properties:
+ - compatible : must be one of
+ - "amlogic,meson8-sdio"
+ - "amlogic,meson8b-sdio"
+ along with the generic "amlogic,meson-mx-sdio"
+ - reg : mmc controller base registers
+ - interrupts : mmc controller interrupt
+ - #address-cells : must be 1
+ - size-cells : must be 0
+ - clocks : phandle to clock providers
+ - clock-names : must contain "core" and "clkin"
+
+Required child nodes:
+A node for each slot provided by the MMC controller is required.
+NOTE: due to a driver limitation currently only one slot (= child node)
+ is supported!
+
+Required properties on each child node (= slot):
+ - compatible : must be "mmc-slot" (see mmc.txt within this directory)
+ - reg : the slot (or "port") ID
+
+Optional properties on each child node (= slot):
+ - bus-width : must be 1 or 4 (8-bit bus is not supported)
+ - for cd and all other additional generic mmc parameters
+ please refer to mmc.txt within this directory
+
+Examples:
+ mmc@c1108c20 {
+ compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+ reg = <0xc1108c20 0x20>;
+ interrupts = <0 28 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+ clock-names = "core", "clkin";
+
+ slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+
+ bus-width = <4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
new file mode 100644
index 000000000..0753289fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -0,0 +1,303 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device Tree Bindings for the Arasan SDHCI Controller
+
+maintainers:
+ - Adrian Hunter <adrian.hunter@intel.com>
+
+allOf:
+ - $ref: "mmc-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: arasan,sdhci-5.1
+ then:
+ required:
+ - phys
+ - phy-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynqmp-8.9a
+ - xlnx,versal-8.9a
+ then:
+ properties:
+ clock-output-names:
+ oneOf:
+ - items:
+ - const: clk_out_sd0
+ - const: clk_in_sd0
+ - items:
+ - const: clk_out_sd1
+ - const: clk_in_sd1
+
+properties:
+ compatible:
+ oneOf:
+ - const: arasan,sdhci-8.9a # generic Arasan SDHCI 8.9a PHY
+ - const: arasan,sdhci-4.9a # generic Arasan SDHCI 4.9a PHY
+ - const: arasan,sdhci-5.1 # generic Arasan SDHCI 5.1 PHY
+ - items:
+ - const: rockchip,rk3399-sdhci-5.1 # rk3399 eMMC PHY
+ - const: arasan,sdhci-5.1
+ description:
+ For this device it is strongly suggested to include
+ arasan,soc-ctl-syscon.
+ - items:
+ - const: xlnx,zynqmp-8.9a # ZynqMP SDHCI 8.9a PHY
+ - const: arasan,sdhci-8.9a
+ description:
+ For this device it is strongly suggested to include
+ clock-output-names and '#clock-cells'.
+ - items:
+ - const: xlnx,versal-8.9a # Versal SDHCI 8.9a PHY
+ - const: arasan,sdhci-8.9a
+ description:
+ For this device it is strongly suggested to include
+ clock-output-names and '#clock-cells'.
+ - items:
+ - const: intel,lgm-sdhci-5.1-emmc # Intel LGM eMMC PHY
+ - const: arasan,sdhci-5.1
+ description:
+ For this device it is strongly suggested to include
+ arasan,soc-ctl-syscon.
+ - items:
+ - const: intel,lgm-sdhci-5.1-sdxc # Intel LGM SDXC PHY
+ - const: arasan,sdhci-5.1
+ description:
+ For this device it is strongly suggested to include
+ arasan,soc-ctl-syscon.
+ - items:
+ - const: intel,keembay-sdhci-5.1-emmc # Intel Keem Bay eMMC PHY
+ - const: arasan,sdhci-5.1
+ description:
+ For this device it is strongly suggested to include
+ arasan,soc-ctl-syscon.
+ - const: intel,keembay-sdhci-5.1-sd # Intel Keem Bay SD controller
+ description:
+ For this device it is strongly suggested to include
+ arasan,soc-ctl-syscon.
+ - const: intel,keembay-sdhci-5.1-sdio # Intel Keem Bay SDIO controller
+ description:
+ For this device it is strongly suggested to include
+ arasan,soc-ctl-syscon.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: clk_xin
+ - const: clk_ahb
+ - const: gate
+
+ interrupts:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: phy_arasan
+
+ arasan,soc-ctl-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ A phandle to a syscon device (see ../mfd/syscon.txt) used to access
+ core corecfg registers. Offsets of registers in this syscon are
+ determined based on the main compatible string for the device.
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 2
+ description:
+ Name of the card clock which will be exposed by this device.
+
+ '#clock-cells':
+ enum: [0, 1]
+ description:
+ With this property in place we will export one or two clocks
+ representing the Card Clock. These clocks are expected to be
+ consumed by our PHY.
+
+ xlnx,fails-without-test-cd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When present, the controller doesn't work when the CD line is not
+ connected properly, and the line is not connected properly.
+ Test mode can be used to force the controller to function.
+
+ xlnx,int-clock-stable-broken:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When present, the controller always reports that the internal clock
+ is stable even when it is not.
+
+ xlnx,mio-bank:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 2]
+ default: 0
+ description:
+ The MIO bank number in which the command and data lines are configured.
+
+dependencies:
+ clock-output-names: [ '#clock-cells' ]
+ '#clock-cells': [ clock-output-names ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc@e0100000 {
+ compatible = "arasan,sdhci-8.9a";
+ reg = <0xe0100000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clkc 21>, <&clkc 32>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 24 4>;
+ };
+
+ - |
+ mmc@e2800000 {
+ compatible = "arasan,sdhci-5.1";
+ reg = <0xe2800000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&cru 8>, <&cru 18>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 24 4>;
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ };
+
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ mmc@fe330000 {
+ compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+ reg = <0xfe330000 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb";
+ arasan,soc-ctl-syscon = <&grf>;
+ assigned-clocks = <&cru SCLK_EMMC>;
+ assigned-clock-rates = <200000000>;
+ clock-output-names = "emmc_cardclock";
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ #clock-cells = <0>;
+ };
+
+ - |
+ mmc@ff160000 {
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 4>;
+ reg = <0xff160000 0x1000>;
+ clocks = <&clk200>, <&clk200>;
+ clock-names = "clk_xin", "clk_ahb";
+ clock-output-names = "clk_out_sd0", "clk_in_sd0";
+ #clock-cells = <1>;
+ clk-phase-sd-hs = <63>, <72>;
+ };
+
+ - |
+ mmc@f1040000 {
+ compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+ interrupt-parent = <&gic>;
+ interrupts = <0 126 4>;
+ reg = <0xf1040000 0x10000>;
+ clocks = <&clk200>, <&clk200>;
+ clock-names = "clk_xin", "clk_ahb";
+ clock-output-names = "clk_out_sd0", "clk_in_sd0";
+ #clock-cells = <1>;
+ clk-phase-sd-hs = <132>, <60>;
+ };
+
+ - |
+ #define LGM_CLK_EMMC5
+ #define LGM_CLK_NGI
+ #define LGM_GCLK_EMMC
+ mmc@ec700000 {
+ compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+ reg = <0xec700000 0x300>;
+ interrupt-parent = <&ioapic1>;
+ interrupts = <44 1>;
+ clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>,
+ <&cgu0 LGM_GCLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb", "gate";
+ clock-output-names = "emmc_cardclock";
+ #clock-cells = <0>;
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ arasan,soc-ctl-syscon = <&sysconf>;
+ };
+
+ - |
+ #define LGM_CLK_SDIO
+ #define LGM_GCLK_SDXC
+ mmc@ec600000 {
+ compatible = "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1";
+ reg = <0xec600000 0x300>;
+ interrupt-parent = <&ioapic1>;
+ interrupts = <43 1>;
+ clocks = <&cgu0 LGM_CLK_SDIO>, <&cgu0 LGM_CLK_NGI>,
+ <&cgu0 LGM_GCLK_SDXC>;
+ clock-names = "clk_xin", "clk_ahb", "gate";
+ clock-output-names = "sdxc_cardclock";
+ #clock-cells = <0>;
+ phys = <&sdxc_phy>;
+ phy-names = "phy_arasan";
+ arasan,soc-ctl-syscon = <&sysconf>;
+ };
+
+ - |
+ #define KEEM_BAY_PSS_AUX_EMMC
+ #define KEEM_BAY_PSS_EMMC
+ mmc@33000000 {
+ compatible = "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x33000000 0x300>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>,
+ <&scmi_clk KEEM_BAY_PSS_EMMC>;
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ assigned-clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>;
+ assigned-clock-rates = <200000000>;
+ clock-output-names = "emmc_cardclock";
+ #clock-cells = <0>;
+ arasan,soc-ctl-syscon = <&mmc_phy_syscon>;
+ };
+
+ - |
+ #define KEEM_BAY_PSS_AUX_SD0
+ #define KEEM_BAY_PSS_SD0
+ mmc@31000000 {
+ compatible = "intel,keembay-sdhci-5.1-sd";
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x31000000 0x300>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>,
+ <&scmi_clk KEEM_BAY_PSS_SD0>;
+ arasan,soc-ctl-syscon = <&sd0_phy_syscon>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
new file mode 100644
index 000000000..987b287f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 IBM Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/MMC Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@aj.id.au>
+ - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+ The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+ Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+ only a single slot is enabled.
+
+ The two slots are supported by a common configuration area. As the SDHCIs for
+ the slots are dependent on the common configuration area, they are described
+ as child nodes.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-sd-controller
+ - aspeed,ast2500-sd-controller
+ - aspeed,ast2600-sd-controller
+ reg:
+ maxItems: 1
+ description: Common configuration registers
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 1
+ ranges: true
+ clocks:
+ maxItems: 1
+ description: The SD/SDIO controller clock gate
+
+patternProperties:
+ "^sdhci@[0-9a-f]+$":
+ type: object
+ $ref: mmc-controller.yaml
+
+ properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-sdhci
+ - aspeed,ast2500-sdhci
+ - aspeed,ast2600-sdhci
+ reg:
+ maxItems: 1
+ description: The SDHCI registers
+ clocks:
+ maxItems: 1
+ description: The SD bus clock
+ interrupts:
+ maxItems: 1
+ description: The SD interrupt shared between both slots
+ sdhci,auto-cmd12:
+ type: boolean
+ description: Specifies that controller should use auto CMD12
+ required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ sdc@1e740000 {
+ compatible = "aspeed,ast2500-sd-controller";
+ reg = <0x1e740000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e740000 0x20000>;
+ clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+ sdhci0: sdhci@100 {
+ compatible = "aspeed,ast2500-sdhci";
+ reg = <0x100 0x100>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ };
+
+ sdhci1: sdhci@200 {
+ compatible = "aspeed,ast2500-sdhci";
+ reg = <0x200 0x100>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
new file mode 100644
index 000000000..07ad02075
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -0,0 +1,73 @@
+* Atmel High Speed MultiMedia Card Interface
+
+This controller on atmel products provides an interface for MMC, SD and SDIO
+types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the atmel-mci driver.
+
+1) MCI node
+
+Required properties:
+- compatible: should be "atmel,hsmci"
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+- at least one slot node
+- clock-names: tuple listing input clock names.
+ Required elements: "mci_clk"
+- clocks: phandles to input clocks.
+
+The node contains child nodes for each slot that the platform uses
+
+Example MCI node:
+
+mmc0: mmc@f0008000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0008000 0x600>;
+ interrupts = <12 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "mci_clk";
+ clocks = <&mci0_clk>;
+
+ [ child node definitions...]
+};
+
+2) slot nodes
+
+Required properties:
+- reg: should contain the slot id.
+- bus-width: number of data lines connected to the controller
+
+Optional properties:
+- cd-gpios: specify GPIOs for card detection
+- cd-inverted: invert the value of external card detect gpio line
+- wp-gpios: specify GPIOs for write protection
+
+Example slot node:
+
+slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 0>
+ cd-inverted;
+};
+
+Example full MCI node:
+mmc0: mmc@f0008000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0008000 0x600>;
+ interrupts = <12 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 0>
+ cd-inverted;
+ };
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt
new file mode 100644
index 000000000..b0f0999ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt
@@ -0,0 +1,29 @@
+* Mellanox Bluefield SoC specific extensions to the Synopsys Designware
+ Mobile Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Mellanox Bluefield SoC
+specific extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be one of the following.
+ - "mellanox,bluefield-dw-mshc": for controllers with Mellanox Bluefield SoC
+ specific extensions.
+
+Example:
+
+ /* Mellanox Bluefield SoC MMC */
+ mmc@6008000 {
+ compatible = "mellanox,bluefield-dw-mshc";
+ reg = <0x6008000 0x400>;
+ interrupts = <32>;
+ fifo-depth = <0x100>;
+ clock-frequency = <24000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
new file mode 100644
index 000000000..d876580ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
@@ -0,0 +1,23 @@
+Broadcom BCM2835 SDHOST controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-sdhost".
+- clocks: The clock feeding the SDHOST controller.
+
+Optional properties:
+- dmas: DMA channel for read and write.
+ See Documentation/devicetree/bindings/dma/dma.txt for details
+
+Example:
+
+sdhost: mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
new file mode 100644
index 000000000..7f5dd83f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
@@ -0,0 +1,21 @@
+Broadcom BCM281xx SDHCI
+
+This file documents differences between the core properties in mmc.txt
+and the properties present in the bcm281xx SDHCI
+
+Required properties:
+- compatible : Should be "brcm,kona-sdhci"
+- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
+- clocks: phandle + clock specifier pair of the external clock
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+sdio2: sdio@3f1a0000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x3f1a0000 0x10000>;
+ clocks = <&sdio3_clk>;
+ interrupts = <0x0 74 0x4>;
+};
+
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
new file mode 100644
index 000000000..ae2074184
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -0,0 +1,53 @@
+* BROADCOM BRCMSTB/BMIPS SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-brcmstb driver.
+
+NOTE: The driver disables all UHS speed modes by default and depends
+on Device Tree properties to enable them for SoC/Board combinations
+that support them.
+
+Required properties:
+- compatible: should be one of the following
+ - "brcm,bcm7425-sdhci"
+ - "brcm,bcm7445-sdhci"
+ - "brcm,bcm7216-sdhci"
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+ sdhci@84b0000 {
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ sdhci,auto-cmd12;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b0000 0x260 0x84b0300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x26 0x4>;
+ interrupt-names = "sdio0_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
+ };
+
+ sdhci@84b1000 {
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ supports-cqe;
+ non-removable;
+ bus-width = <0x8>;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b1000 0x260 0x84b1300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x27 0x4>;
+ interrupt-names = "sdio1_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
new file mode 100644
index 000000000..09d87cc11
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -0,0 +1,37 @@
+Broadcom IPROC SDHCI controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the IPROC SDHCI controller.
+
+Required properties:
+- compatible : Should be one of the following
+ "brcm,bcm2835-sdhci"
+ "brcm,bcm2711-emmc2"
+ "brcm,sdhci-iproc-cygnus"
+ "brcm,sdhci-iproc"
+
+Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
+bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
+
+Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
+restricted to 32bit host accesses to SDHCI registers.
+
+Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
+8, 16, 32-bit host access to SDHCI register.
+
+- clocks : The clock feeding the SDHCI controller.
+
+Optional properties:
+ - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
+
+Example:
+
+sdhci0: sdhci@18041000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18041000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ no-1-8-v;
+};
diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
new file mode 100644
index 000000000..1433e6201
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
@@ -0,0 +1,57 @@
+* Cavium Octeon & ThunderX MMC controller
+
+The highspeed MMC host controller on Caviums SoCs provides an interface
+for MMC and SD types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 4.0. Only 3.3 Volt is supported.
+
+Required properties:
+ - compatible : should be one of:
+ cavium,octeon-6130-mmc
+ cavium,octeon-7890-mmc
+ cavium,thunder-8190-mmc
+ cavium,thunder-8390-mmc
+ mmc-slot
+ - reg : mmc controller base registers
+ - clocks : phandle
+
+Optional properties:
+ - for cd, bus-width and additional generic mmc parameters
+ please refer to mmc.txt within this directory
+ - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command
+ - cavium,dat-clk-skew : number of coprocessor clocks before sampling data
+
+Deprecated properties:
+- spi-max-frequency : use max-frequency instead
+- cavium,bus-max-width : use bus-width instead
+- power-gpios : use vmmc-supply instead
+- cavium,octeon-6130-mmc-slot : use mmc-slot instead
+
+Examples:
+ mmc_1_4: mmc@1,4 {
+ compatible = "cavium,thunder-8390-mmc";
+ reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sclk>;
+
+ mmc-slot@0 {
+ compatible = "mmc-slot";
+ reg = <0>;
+ vmmc-supply = <&mmc_supply_3v3>;
+ max-frequency = <42000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
+ mmc-slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ vmmc-supply = <&mmc_supply_3v3>;
+ max-frequency = <42000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
new file mode 100644
index 000000000..af7442f73
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+ - Piotr Sroka <piotrs@cadence.com>
+
+allOf:
+ - $ref: mmc-controller.yaml
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - socionext,uniphier-sd4hc
+ - const: cdns,sd4hc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ # PHY DLL input delays:
+ # They are used to delay the data valid window, and align the window to
+ # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+ # and it is increased by 2.5ns in each step.
+
+ cdns,phy-input-delay-sd-highspeed:
+ description: Value of the delay in the input path for SD high-speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-legacy:
+ description: Value of the delay in the input path for legacy timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-sdr12:
+ description: Value of the delay in the input path for SD UHS SDR12 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-sdr25:
+ description: Value of the delay in the input path for SD UHS SDR25 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-sdr50:
+ description: Value of the delay in the input path for SD UHS SDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-ddr50:
+ description: Value of the delay in the input path for SD UHS DDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-mmc-highspeed:
+ description: Value of the delay in the input path for MMC high-speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-input-delay-mmc-ddr:
+ description: Value of the delay in the input path for eMMC high-speed DDR timing
+
+ # PHY DLL clock delays:
+ # Each delay property represents the fraction of the clock period.
+ # The approximate delay value will be
+ # (<delay property value>/128)*sdmclk_clock_period.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ cdns,phy-dll-delay-sdclk:
+ description: |
+ Value of the delay introduced on the sdclk output for all modes except
+ HS200, HS400 and HS400_ES.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x7f
+
+ cdns,phy-dll-delay-sdclk-hsmmc:
+ description: |
+ Value of the delay introduced on the sdclk output for HS200, HS400 and
+ HS400_ES speed modes.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x7f
+
+ cdns,phy-dll-delay-strobe:
+ description: |
+ Value of the delay introduced on the dat_strobe input used in
+ HS400 / HS400_ES speed modes.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x7f
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ emmc: mmc@5a000000 {
+ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+ reg = <0x5a000000 0x400>;
+ interrupts = <0 78 4>;
+ clocks = <&clk 4>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cdns,phy-dll-delay-sdclk = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
new file mode 100644
index 000000000..516fb0143
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
@@ -0,0 +1,32 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+ as described in the generic DMA client binding. A tx and rx
+ specifier is required.
+- dma-names: RX and TX DMA request names. These strings correspond
+ 1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+ compatible = "ti,da830-mmc",
+ reg = <0x40000 0x1000>;
+ interrupts = <16>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ dmas = <&edma 16
+ &edma 17>;
+ dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
new file mode 100644
index 000000000..0419a63f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -0,0 +1,92 @@
+* Samsung Exynos specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
+ specific extensions.
+ - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
+ specific extensions.
+ - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
+ specific extensions.
+ - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
+ specific extensions.
+ - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
+ specific extensions.
+ - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
+ specific extensions having an SMU.
+
+* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
+ unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
+ ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
+
+* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
+ in transmit mode and CIU clock phase shift value in receive mode for single
+ data rate mode operation. Refer notes below for the order of the cells and the
+ valid values.
+
+* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
+ in transmit mode and CIU clock phase shift value in receive mode for double
+ data rate mode operation. Refer notes below for the order of the cells and the
+ valid values.
+* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
+ shift value for hs400 mode operation.
+
+ Notes for the sdr-timing and ddr-timing values:
+
+ The order of the cells should be
+ - First Cell: CIU clock phase shift value for tx mode.
+ - Second Cell: CIU clock phase shift value for rx mode.
+
+ Valid values for SDR and DDR CIU clock timing for Exynos5250:
+ - valid value for tx phase shift and rx phase shift is 0 to 7.
+ - when CIU clock divider value is set to 3, all possible 8 phase shift
+ values can be used.
+ - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+ phase shift clocks should be 0.
+
+* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
+ (Latency value for delay line in Read path)
+
+Required properties for a slot (Deprecated - Recommend to use one slot per host):
+
+* gpios: specifies a list of gpios used for command, clock and data bus. The
+ first gpio is the command line and the second gpio is the clock line. The
+ rest of the gpios (depending on the bus-width property) are the data lines in
+ no particular order. The format of the gpio specifier depends on the gpio
+ controller.
+(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
+
+Example:
+
+ The MSHC controller node can be split into two portions, SoC specific and
+ board specific portions as listed below.
+
+ dwmmc0@12200000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dwmmc0@12200000 {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ bus-width = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
new file mode 100644
index 000000000..edb8cadb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -0,0 +1,52 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-esdhc driver.
+
+Required properties:
+ - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
+ Possible compatibles for PowerPC:
+ "fsl,mpc8536-esdhc"
+ "fsl,mpc8378-esdhc"
+ "fsl,p2020-esdhc"
+ "fsl,p4080-esdhc"
+ "fsl,t1040-esdhc"
+ "fsl,t4240-esdhc"
+ Possible compatibles for ARM:
+ "fsl,ls1012a-esdhc"
+ "fsl,ls1028a-esdhc"
+ "fsl,ls1088a-esdhc"
+ "fsl,ls1043a-esdhc"
+ "fsl,ls1046a-esdhc"
+ "fsl,ls2080a-esdhc"
+ - clock-frequency : specifies eSDHC base clock frequency.
+
+Optional properties:
+ - sdhci,wp-inverted : specifies that eSDHC controller reports
+ inverted write-protect state; New devices should use the generic
+ "wp-inverted" property.
+ - sdhci,1-bit-only : specifies that a controller can only handle
+ 1-bit data transfers. New devices should use the generic
+ "bus-width = <1>" property.
+ - sdhci,auto-cmd12: specifies that a controller can only handle auto
+ CMD12.
+ - voltage-ranges : two cells are required, first cell specifies minimum
+ slot voltage (mV), second cell specifies maximum slot voltage (mV).
+ Several ranges could be specified.
+ - little-endian : If the host controller is little-endian mode, specify
+ this property. The default endian mode is big-endian.
+
+Example:
+
+sdhci@2e000 {
+ compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ voltage-ranges = <3300 3300>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
new file mode 100644
index 000000000..e71d13c2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+description: |
+ The Enhanced Secure Digital Host Controller on Freescale i.MX family
+ provides an interface for MMC, SD, and SDIO types of memory cards.
+
+ This file documents differences between the core properties described
+ by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx25-esdhc
+ - fsl,imx35-esdhc
+ - fsl,imx51-esdhc
+ - fsl,imx53-esdhc
+ - fsl,imx6q-usdhc
+ - fsl,imx6sl-usdhc
+ - fsl,imx6sx-usdhc
+ - fsl,imx6ull-usdhc
+ - fsl,imx7d-usdhc
+ - fsl,imx7ulp-usdhc
+ - items:
+ - enum:
+ - fsl,imx8mm-usdhc
+ - fsl,imx8mn-usdhc
+ - fsl,imx8mp-usdhc
+ - fsl,imx8mq-usdhc
+ - fsl,imx8qxp-usdhc
+ - const: fsl,imx7d-usdhc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ fsl,wp-controller:
+ description: |
+ boolean, if present, indicate to use controller internal write protection.
+ type: boolean
+
+ fsl,delay-line:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify the number of delay cells for override mode.
+ This is used to set the clock delay for DLL(Delay Line) on override mode
+ to select a proper data sampling window in case the clock quality is not good
+ due to signal path is too long on the board. Please refer to eSDHC/uSDHC
+ chapter, DLL (Delay Line) section in RM for details.
+ default: 0
+
+ voltage-ranges:
+ $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+ description: |
+ Specify the voltage range in case there are software transparent level
+ shifters on the outputs of the controller. Two cells are required, first
+ cell specifies minimum slot voltage (mV), second cell specifies maximum
+ slot voltage (mV).
+ items:
+ items:
+ - description: value for minimum slot voltage
+ - description: value for maximum slot voltage
+ maxItems: 1
+
+ fsl,tuning-start-tap:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify the start delay cell point when send first CMD19 in tuning procedure.
+ default: 0
+
+ fsl,tuning-step:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify the increasing delay cell steps in tuning procedure.
+ The uSDHC use one delay cell as default increasing step to do tuning process.
+ This property allows user to change the tuning step to more than one delay
+ cells which is useful for some special boards or cards when the default
+ tuning step can't find the proper delay window within limited tuning retries.
+ default: 0
+
+ fsl,strobe-dll-delay-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify the strobe dll control slave delay target.
+ This delay target programming host controller loopback read clock, and this
+ property allows user to change the delay target for the strobe input read clock.
+ If not use this property, driver default set the delay target to value 7.
+ Only eMMC HS400 mode need to take care of this property.
+ default: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc@70004000 {
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70004000 0x4000>;
+ interrupts = <1>;
+ fsl,wp-controller;
+ };
+
+ mmc@70008000 {
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70008000 0x4000>;
+ interrupts = <2>;
+ cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
+ };
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
new file mode 100644
index 000000000..ffa162722
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Secure Digital Host Controller for i.MX2/3 series
+
+maintainers:
+ - Markus Pargmann <mpa@pengutronix.de>
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx21-mmc
+ - const: fsl,imx31-mmc
+ - items:
+ - const: fsl,imx27-mmc
+ - const: fsl,imx21-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc@10014000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x10014000 0x1000>;
+ interrupts = <11>;
+ dmas = <&dma 7>;
+ dma-names = "rx-tx";
+ bus-width = <4>;
+ cd-gpios = <&gpio3 29>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
new file mode 100644
index 000000000..a0693b714
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
@@ -0,0 +1,40 @@
+* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200
+specific extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc".
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed
+ in clock-names.
+- clock-names: Should contain the following:
+ "ciu" - The ciu clock described in synopsys-dw-mshc.txt.
+ "biu" - The biu clock described in synopsys-dw-mshc.txt.
+ "ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling.
+ "ciu-drive" - Hi3798CV200 extended phase clock for ciu driving.
+
+Example:
+
+ emmc: mmc@9830000 {
+ compatible = "hisilicon,hi3798cv200-dw-mshc";
+ reg = <0x9830000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_MMC_CIU_CLK>,
+ <&crg HISTB_MMC_BIU_CLK>,
+ <&crg HISTB_MMC_SAMPLE_CLK>,
+ <&crg HISTB_MMC_DRV_CLK>;
+ clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+ fifo-depth = <256>;
+ clock-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ bus-width = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
new file mode 100644
index 000000000..c54e577ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
@@ -0,0 +1,28 @@
+* Imagination specific extensions to the Synopsys Designware Mobile Storage
+ Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Imagination specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "img,pistachio-dw-mshc": for Pistachio SoCs
+
+Example:
+
+ mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&system_clk>, <&sdhost_clk>;
+ clock-names = "biu", "ciu";
+
+ fifo-depth = <0x20>;
+ bus-width = <4>;
+ disable-wp;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
new file mode 100644
index 000000000..04ba8b7fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs MMC Controller DT bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-mmc
+ - ingenic,jz4725b-mmc
+ - ingenic,jz4760-mmc
+ - ingenic,jz4780-mmc
+ - ingenic,x1000-mmc
+ - items:
+ - const: ingenic,jz4770-mmc
+ - const: ingenic,jz4760-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: mmc
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ mmc0: mmc@13450000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu JZ4780_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+ <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
new file mode 100644
index 000000000..36c4bea67
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -0,0 +1,73 @@
+* Hisilicon specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be one of the following.
+ - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
+ - "hisilicon,hi3670-dw-mshc", "hisilicon,hi3660-dw-mshc": for controllers
+ with hi3670 specific extensions.
+ - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
+ - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
+
+Optional Properties:
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+
+Example:
+
+ /* for Hi3620 */
+
+ /* SoC portion */
+ dwmmc_0: dwmmc0@fcd03000 {
+ compatible = "hisilicon,hi4511-dw-mshc";
+ reg = <0xfcd03000 0x1000>;
+ interrupts = <0 16 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
+ clock-names = "ciu", "biu";
+ };
+
+ /* Board portion */
+ dwmmc0@fcd03000 {
+ vmmc-supply = <&ldo12>;
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
+ bus-width = <4>;
+ disable-wp;
+ cd-gpios = <&gpio10 3 0>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ };
+
+ /* for Hi6220 */
+
+ dwmmc_1: dwmmc1@f723e000 {
+ compatible = "hisilicon,hi6220-dw-mshc";
+ bus-width = <0x4>;
+ disable-wp;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ card-detect-delay = <200>;
+ hisilicon,peripheral-syscon = <&ao_ctrl>;
+ reg = <0x0 0xf723e000 0x0 0x1000>;
+ interrupts = <0x0 0x49 0x4>;
+ clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>;
+ clock-names = "ciu", "biu";
+ cd-gpios = <&gpio1 0 1>;
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+ pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+ vqmmc-supply = <&ldo7>;
+ vmmc-supply = <&ldo10>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
new file mode 100644
index 000000000..ed1456f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
@@ -0,0 +1,172 @@
+Marvell Xenon SDHCI Controller device tree bindings
+This file documents differences between the core mmc properties
+described by mmc.txt and the properties used by the Xenon implementation.
+
+Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+Each SDHC is independent and owns independent resources, such as register sets,
+clock and PHY.
+Each SDHC should have an independent device tree node.
+
+Required Properties:
+- compatible: should be one of the following
+ - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
+ Must provide a second register area and marvell,pad-type.
+ - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
+ - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
+
+- clocks:
+ Array of clocks required for SDHC.
+ Require at least input clock for Xenon IP core. For Armada AP806 and
+ CP110, the AXI clock is also mandatory.
+
+- clock-names:
+ Array of names corresponding to clocks property.
+ The input clock for Xenon IP core should be named as "core".
+ The input clock for the AXI bus must be named as "axi".
+
+- reg:
+ * For "marvell,armada-3700-sdhci", two register areas.
+ The first one for Xenon IP register. The second one for the Armada 3700 SoC
+ PHY PAD Voltage Control register.
+ Please follow the examples with compatible "marvell,armada-3700-sdhci"
+ in below.
+ Please also check property marvell,pad-type in below.
+
+ * For other compatible strings, one register area for Xenon IP.
+
+Optional Properties:
+- marvell,xenon-sdhc-id:
+ Indicate the corresponding bit index of current SDHC in
+ SDHC System Operation Control Register Bit[7:0].
+ Set/clear the corresponding bit to enable/disable current SDHC.
+ If Xenon IP contains only one SDHC, this property is optional.
+
+- marvell,xenon-phy-type:
+ Xenon support multiple types of PHYs.
+ To select eMMC 5.1 PHY, set:
+ marvell,xenon-phy-type = "emmc 5.1 phy"
+ eMMC 5.1 PHY is the default choice if this property is not provided.
+ To select eMMC 5.0 PHY, set:
+ marvell,xenon-phy-type = "emmc 5.0 phy"
+
+ All those types of PHYs can support eMMC, SD and SDIO.
+ Please note that this property only presents the type of PHY.
+ It doesn't stand for the entire SDHC type or property.
+ For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
+ supports eMMC 5.1.
+
+- marvell,xenon-phy-znr:
+ Set PHY ZNR value.
+ Only available for eMMC PHY.
+ Valid range = [0:0x1F].
+ ZNR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-zpr:
+ Set PHY ZPR value.
+ Only available for eMMC PHY.
+ Valid range = [0:0x1F].
+ ZPR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-nr-success-tun:
+ Set the number of required consecutive successful sampling points
+ used to identify a valid sampling window, in tuning process.
+ Valid range = [1:7].
+ Set as 0x4 by default if this property is not provided.
+
+- marvell,xenon-phy-tun-step-divider:
+ Set the divider for calculating TUN_STEP.
+ Set as 64 by default if this property is not provided.
+
+- marvell,xenon-phy-slow-mode:
+ If this property is selected, transfers will bypass PHY.
+ Only available when bus frequency lower than 55MHz in SDR mode.
+ Disabled by default. Please only try this property if timing issues
+ always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
+ SD Default Speed and HS mode and eMMC legacy speed mode.
+
+- marvell,xenon-tun-count:
+ Xenon SDHC SoC usually doesn't provide re-tuning counter in
+ Capabilities Register 3 Bit[11:8].
+ This property provides the re-tuning counter.
+ If this property is not set, default re-tuning counter will
+ be set as 0x9 in driver.
+
+- marvell,pad-type:
+ Type of Armada 3700 SoC PHY PAD Voltage Controller register.
+ Only valid when "marvell,armada-3700-sdhci" is selected.
+ Two types: "sd" and "fixed-1-8v".
+ If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
+ switched to 1.8V when later in higher speed mode.
+ If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
+ Please follow the examples with compatible "marvell,armada-3700-sdhci"
+ in below.
+
+Example:
+- For eMMC:
+
+ sdhci@aa0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0xaa0000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+ clocks = <&emmc_clk>,<&axi_clk>;
+ clock-names = "core", "axi";
+ bus-width = <4>;
+ marvell,xenon-phy-slow-mode;
+ marvell,xenon-tun-count = <11>;
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ /* Vmmc and Vqmmc are both fixed */
+ };
+
+- For SD/SDIO:
+
+ sdhci@ab0000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0xab0000 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+ vqmmc-supply = <&sd_vqmmc_regulator>;
+ vmmc-supply = <&sd_vmmc_regulator>;
+ clocks = <&sdclk>, <&axi_clk>;
+ clock-names = "core", "axi";
+ bus-width = <4>;
+ marvell,xenon-tun-count = <9>;
+ };
+
+- For eMMC with compatible "marvell,armada-3700-sdhci":
+
+ sdhci@aa0000 {
+ compatible = "marvell,armada-3700-sdhci";
+ reg = <0xaa0000 0x1000>,
+ <phy_addr 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+ clocks = <&emmcclk>;
+ clock-names = "core";
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ /* Vmmc and Vqmmc are both fixed */
+
+ marvell,pad-type = "fixed-1-8v";
+ };
+
+- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+
+ sdhci@ab0000 {
+ compatible = "marvell,armada-3700-sdhci";
+ reg = <0xab0000 0x1000>,
+ <phy_addr 0x4>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+ vqmmc-supply = <&sd_regulator>;
+ /* Vmmc is fixed */
+ clocks = <&sdclk>;
+ clock-names = "core";
+ bus-width = <4>;
+
+ marvell,pad-type = "sd";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
new file mode 100644
index 000000000..69ff065c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Mobile Storage Host Controller Binding
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ const: microchip,dw-sparx5-sdhci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ Handle to "core" clock for the sdhci controller.
+
+ clock-names:
+ items:
+ - const: core
+
+ microchip,clock-delay:
+ description: Delay clock to card to meet setup time requirements.
+ Each step increase by 1.25ns.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 1
+ maximum: 15
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/microchip,sparx5.h>
+ sdhci0: mmc@600800000 {
+ compatible = "microchip,dw-sparx5-sdhci";
+ reg = <0x00800000 0x1000>;
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+ clocks = <&clks CLK_ID_AUX1>;
+ clock-names = "core";
+ assigned-clocks = <&clks CLK_ID_AUX1>;
+ assigned-clock-rates = <800000000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ microchip,clock-delay = <10>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
new file mode 100644
index 000000000..f064528ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -0,0 +1,29 @@
+* Microchip PIC32 SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pic32 driver.
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-sdhci"
+- interrupts: Should contain interrupt
+- clock-names: Should be "base_clk", "sys_clk".
+ See: Documentation/devicetree/bindings/resource-names.txt
+- clocks: Phandle to the clock.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+
+ sdhci@1f8ec000 {
+ compatible = "microchip,pic32mzda-sdhci";
+ reg = <0x1f8ec000 0x100>;
+ interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
+ clock-names = "base_clk", "sys_clk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc1>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
new file mode 100644
index 000000000..8d2d71758
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt
@@ -0,0 +1,30 @@
+mmc-card / eMMC bindings
+------------------------
+
+This documents describes the devicetree bindings for a mmc-host controller
+child node describing a mmc-card / an eMMC, see "Use of Function subnodes"
+in mmc.txt
+
+Required properties:
+-compatible : Must be "mmc-card"
+-reg : Must be <0>
+
+Optional properties:
+-broken-hpi : Use this to indicate that the mmc-card has a broken hpi
+ implementation, and that hpi should not be used
+
+Example:
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
new file mode 100644
index 000000000..186f04ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -0,0 +1,394 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Controller Generic Binding
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |
+ These properties are common to multiple MMC host controllers. Any host
+ that requires the respective functionality should implement them using
+ these definitions.
+
+ It is possible to assign a fixed index mmcN to an MMC host controller
+ (and the corresponding mmcblkN devices) by defining an alias in the
+ /aliases device tree node.
+
+properties:
+ $nodename:
+ pattern: "^mmc(@.*)?$"
+
+ "#address-cells":
+ const: 1
+ description: |
+ The cell is the slot ID if a function subnode is used.
+
+ "#size-cells":
+ const: 0
+
+ # Card Detection.
+ # If none of these properties are supplied, the host native card
+ # detect will be used. Only one of them should be provided.
+
+ broken-cd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ There is no card detection available; polling must be used.
+
+ cd-gpios:
+ description:
+ The card detection will be done using the GPIO provided.
+
+ non-removable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Non-removable slot (like eMMC); assume always present.
+
+ # *NOTE* on CD and WP polarity. To use common for all SD/MMC host
+ # controllers line polarity properties, we have to fix the meaning
+ # of the "normal" and "inverted" line levels. We choose to follow
+ # the SDHCI standard, which specifies both those lines as "active
+ # low." Therefore, using the "cd-inverted" property means, that the
+ # CD line is active high, i.e. it is high, when a card is
+ # inserted. Similar logic applies to the "wp-inverted" property.
+ #
+ # CD and WP lines can be implemented on the hardware in one of two
+ # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or
+ # as dedicated pins. Polarity of dedicated pins can be specified,
+ # using *-inverted properties. GPIO polarity can also be specified
+ # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the
+ # latter case. We choose to use the XOR logic for GPIO CD and WP
+ # lines. This means, the two properties are "superimposed," for
+ # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
+ # respective *-inverted property property results in a
+ # double-inversion and actually means the "normal" line polarity is
+ # in effect.
+ wp-inverted:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The Write Protect line polarity is inverted.
+
+ cd-inverted:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The CD line polarity is inverted.
+
+ # Other properties
+
+ bus-width:
+ description:
+ Number of data lines.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 4, 8]
+ default: 1
+
+ max-frequency:
+ description:
+ Maximum operating frequency of the bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 400000
+ maximum: 200000000
+
+ disable-wp:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, no physical write-protect line is present. This
+ property should only be specified when the controller has a
+ dedicated write-protect detection logic. If a GPIO is always used
+ for the write-protect detection logic, it is sufficient to not
+ specify the wp-gpios property in the absence of a write-protect
+ line. Not used in combination with eMMC or SDIO.
+
+ wp-gpios:
+ description:
+ GPIO to use for the write-protect detection.
+
+ cd-debounce-delay-ms:
+ description:
+ Set delay time before detecting card after card insert
+ interrupt.
+
+ no-1-8-v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When specified, denotes that 1.8V card voltage is not supported
+ on this system, even if the controller claims it.
+
+ cap-sd-highspeed:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD high-speed timing is supported.
+
+ cap-mmc-highspeed:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ MMC high-speed timing is supported.
+
+ sd-uhs-sdr12:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR12 speed is supported.
+
+ sd-uhs-sdr25:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR25 speed is supported.
+
+ sd-uhs-sdr50:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR50 speed is supported.
+
+ sd-uhs-sdr104:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR104 speed is supported.
+
+ sd-uhs-ddr50:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS DDR50 speed is supported.
+
+ cap-power-off-card:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Powering off the card is safe.
+
+ cap-mmc-hw-reset:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC hardware reset is supported
+
+ cap-sdio-irq:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ enable SDIO IRQ signalling on this interface
+
+ full-pwr-cycle:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Full power cycle of the card is supported.
+
+ full-pwr-cycle-in-suspend:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Full power cycle of the card in suspend is supported.
+
+ mmc-ddr-1_2v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC high-speed DDR mode (1.2V I/O) is supported.
+
+ mmc-ddr-1_8v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC high-speed DDR mode (1.8V I/O) is supported.
+
+ mmc-ddr-3_3v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC high-speed DDR mode (3.3V I/O) is supported.
+
+ mmc-hs200-1_2v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS200 mode (1.2V I/O) is supported.
+
+ mmc-hs200-1_8v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS200 mode (1.8V I/O) is supported.
+
+ mmc-hs400-1_2v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS400 mode (1.2V I/O) is supported.
+
+ mmc-hs400-1_8v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS400 mode (1.8V I/O) is supported.
+
+ mmc-hs400-enhanced-strobe:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS400 enhanced strobe mode is supported
+
+ dsr:
+ description:
+ Value the card Driver Stage Register (DSR) should be programmed
+ with.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 0xffff
+
+ no-sdio:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Controller is limited to send SDIO commands during
+ initialization.
+
+ no-sd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Controller is limited to send SD commands during initialization.
+
+ no-mmc:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Controller is limited to send MMC commands during
+ initialization.
+
+ fixed-emmc-driver-type:
+ description:
+ For non-removable eMMC, enforce this driver type. The value is
+ the driver type as specified in the eMMC specification (table
+ 206 in spec version 5.1)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 4
+
+ post-power-on-delay-ms:
+ description:
+ It was invented for MMC pwrseq-simple which could be referred to
+ mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
+ waiting for I/O signalling and card power supply to be stable,
+ regardless of whether pwrseq-simple is used. Default to 10ms if
+ no available.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 10
+
+ supports-cqe:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The presence of this property indicates that the corresponding
+ MMC host controller supports HW command queue feature.
+
+ disable-cqe-dcmd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The presence of this property indicates that the MMC
+ controller\'s command queue engine (CQE) does not support direct
+ commands (DCMDs).
+
+ keep-power-in-suspend:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SDIO only. Preserves card power during a suspend/resume cycle.
+
+ # Deprecated: enable-sdio-wakeup
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SDIO only. Enables wake up of host system on SDIO IRQ assertion.
+
+ vmmc-supply:
+ description:
+ Supply for the card power
+
+ vqmmc-supply:
+ description:
+ Supply for the bus IO line power
+
+ mmc-pwrseq:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ System-on-Chip designs may specify a specific MMC power
+ sequence. To successfully detect an (e)MMC/SD/SDIO card, that
+ power sequence must be maintained while initializing the card.
+
+patternProperties:
+ "^.*@[0-9]+$":
+ type: object
+ description: |
+ On embedded systems the cards connected to a host may need
+ additional properties. These can be specified in subnodes to the
+ host controller node. The subnodes are identified by the
+ standard \'reg\' property. Which information exactly can be
+ specified depends on the bindings for the SDIO function driver
+ for the subnode, as specified by the compatible string.
+
+ properties:
+ compatible:
+ description: |
+ Name of SDIO function following generic names recommended
+ practice
+
+ reg:
+ items:
+ - minimum: 0
+ maximum: 7
+ description:
+ Must contain the SDIO function number of the function this
+ subnode describes. A value of 0 denotes the memory SD
+ function, values from 1 to 7 denote the SDIO functions.
+
+ broken-hpi:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Use this to indicate that the mmc-card has a broken hpi
+ implementation, and that hpi should not be used.
+
+ required:
+ - reg
+
+ "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ minItems: 2
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 359
+ description:
+ Set the clock (phase) delays which are to be configured in the
+ controller while switching to particular speed mode. These values
+ are in pair of degrees.
+
+dependencies:
+ cd-debounce-delay-ms: [ cd-gpios ]
+ fixed-emmc-driver-type: [ non-removable ]
+
+additionalProperties: true
+
+examples:
+ - |
+ mmc@ab000000 {
+ compatible = "sdhci";
+ reg = <0xab000000 0x200>;
+ interrupts = <23>;
+ bus-width = <4>;
+ cd-gpios = <&gpio 69 0>;
+ cd-inverted;
+ wp-gpios = <&gpio 70 0>;
+ max-frequency = <50000000>;
+ keep-power-in-suspend;
+ wakeup-source;
+ mmc-pwrseq = <&sdhci0_pwrseq>;
+ clk-phase-sd-hs = <63>, <72>;
+ };
+
+ - |
+ mmc3: mmc@1c12000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1c12000 0x200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <&reg_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&sdhci0_pwrseq>;
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm43xx-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 8>;
+ interrupt-names = "host-wake";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
new file mode 100644
index 000000000..1fc7e620f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple eMMC hardware reset provider binding
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ The purpose of this driver is to perform standard eMMC hw reset
+ procedure, as described by Jedec 4.4 specification. This procedure is
+ performed just after MMC core enabled power to the given mmc host (to
+ fix possible issues if bootloader has left eMMC card in initialized or
+ unknown state), and before performing complete system reboot (also in
+ case of emergency reboot call). The latter is needed on boards, which
+ doesn't have hardware reset logic connected to emmc card and (limited or
+ broken) ROM bootloaders are unable to read second stage from the emmc
+ card if the card is left in unknown or already initialized state.
+
+properties:
+ compatible:
+ const: mmc-pwrseq-emmc
+
+ reset-gpios:
+ minItems: 1
+ description:
+ contains a GPIO specifier. The reset GPIO is asserted
+ and then deasserted to perform eMMC card reset. To perform
+ reset procedure as described in Jedec 4.4 specification, the
+ gpio line should be defined as GPIO_ACTIVE_LOW.
+
+required:
+ - compatible
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
new file mode 100644
index 000000000..e0169a285
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell SD8787 power sequence provider binding
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+ compatible:
+ const: mmc-pwrseq-sd8787
+
+ powerdown-gpios:
+ minItems: 1
+ description:
+ contains a power down GPIO specifier with the default active state
+
+ reset-gpios:
+ minItems: 1
+ description:
+ contains a reset GPIO specifier with the default active state
+
+required:
+ - compatible
+ - powerdown-gpios
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-sd8787";
+ powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
new file mode 100644
index 000000000..6cd57863c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple MMC power sequence provider binding
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ The purpose of the simple MMC power sequence provider is to supports a set
+ of common properties between various SOC designs. It thus enables us to use
+ the same provider for several SOC designs.
+
+properties:
+ compatible:
+ const: mmc-pwrseq-simple
+
+ reset-gpios:
+ minItems: 1
+ # Put some limit to avoid false warnings
+ maxItems: 32
+ description:
+ contains a list of GPIO specifiers. The reset GPIOs are asserted
+ at initialization and prior we start the power up procedure of the card.
+ They will be de-asserted right after the power has been provided to the
+ card.
+
+ clocks:
+ minItems: 1
+ description: Handle for the entry in clock-names.
+
+ clock-names:
+ items:
+ - const: ext_clock
+ description: External clock provided to the card.
+
+ post-power-on-delay-ms:
+ description:
+ Delay in ms after powering the card and de-asserting the
+ reset-gpios (if any).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ power-off-delay-us:
+ description:
+ Delay in us after asserting the reset-gpios (if any)
+ during power off of the card.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ sdhci0_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ clocks = <&clk_32768_ck>;
+ clock-names = "ext_clock";
+ };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
new file mode 100644
index 000000000..75486cca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
@@ -0,0 +1,29 @@
+MMC/SD/SDIO slot directly connected to a SPI bus
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmc_spi driver.
+
+Required properties:
+- spi-max-frequency : maximum frequency for this device (Hz).
+- voltage-ranges : two cells are required, first cell specifies minimum
+ slot voltage (mV), second cell specifies maximum slot voltage (mV).
+ Several ranges could be specified.
+
+Optional properties:
+- gpios : may specify GPIOs in this order: Card-Detect GPIO,
+ Write-Protect GPIO. Note that this does not follow the
+ binding from mmc.txt, for historical reasons.
+
+Example:
+
+ mmc-slot@0 {
+ compatible = "fsl,mpc8323rdb-mmc-slot",
+ "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&qe_pio_d 14 1
+ &qe_pio_d 15 0>;
+ voltage-ranges = <3300 3300>;
+ spi-max-frequency = <50000000>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
new file mode 100644
index 000000000..bf9d7d3fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -0,0 +1 @@
+This file has moved to mmc-controller.yaml.
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
new file mode 100644
index 000000000..4ec921e4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -0,0 +1,74 @@
+* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
+
+The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
+reading and writing to MultiMedia and SD cards alike.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmci driver. Using "st" as
+the prefix for a property, indicates support by the ST Micro variant.
+
+Required properties:
+- compatible : contains "arm,pl18x", "arm,primecell".
+- vmmc-supply : phandle to the regulator device tree node, mentioned
+ as the VCC/VDD supply in the eMMC/SD specs.
+
+Optional properties:
+- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
+ the ID provided by the HW
+- resets : phandle to internal reset line.
+ Should be defined for sdmmc variant.
+- vqmmc-supply : phandle to the regulator device tree node, mentioned
+ as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+specific for ux500 variant:
+- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
+- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
+- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
+- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7].
+- st,sig-dir-cmd : cmd signal direction pin used for CMD.
+- st,sig-pin-fbclk : feedback clock signal pin used.
+
+specific for sdmmc variant:
+- reg : a second base register may be defined if a delay
+ block is present and used for tuning.
+- st,sig-dir : signal direction polarity used for cmd, dat0 dat123.
+- st,neg-edge : data & command phase relation, generated on
+ sd clock falling edge.
+- st,use-ckin : use ckin pin from an external driver to sample
+ the receive data (example: with voltage
+ switch transceiver).
+
+Deprecated properties:
+- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
+- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
+
+Example:
+
+sdi0_per1@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+ <&dma 29 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+ clock-names = "sdi", "apb_pclk";
+
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cd-gpios = <&gpio2 31 0x4>; // 95
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-cmd;
+ st,sig-pin-fbclk;
+
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi0_default_mode>;
+ pinctrl-1 = <&sdi0_sleep_mode>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
new file mode 100644
index 000000000..b63819149
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
@@ -0,0 +1,30 @@
+MOXA ART MMC Host Controller Interface
+
+ Inherits from mmc binding[1].
+
+ [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt number
+- clocks : Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas : Should contain two DMA channels, line request number must be 5 for
+ both channels
+- dma-names : Must be "tx", "rx"
+
+Example:
+
+ mmc: mmc@98e00000 {
+ compatible = "moxa,moxart-mmc";
+ reg = <0x98e00000 0x5C>;
+ interrupts = <5 0>;
+ clocks = <&clk_apb>;
+ dmas = <&dma 5>,
+ <&dma 5>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
new file mode 100644
index 000000000..26a8f320a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -0,0 +1,75 @@
+* MTK MMC controller
+
+The MTK MSDC can act as a MMC controller
+to support MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the msdc driver.
+
+Required properties:
+- compatible: value should be either of the following.
+ "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
+ "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+ "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
+ "mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
+ "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
+ "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
+ "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+ "mediatek,mt7622-mmc": for MT7622 SoC
+ "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
+ "mediatek,mt7620-mmc", for MT7621 SoC (and others)
+
+- reg: physical base address of the controller and length
+- interrupts: Should contain MSDC interrupt number
+- clocks: Should contain phandle for the clock feeding the MMC controller
+- clock-names: Should contain the following:
+ "source" - source clock (required)
+ "hclk" - HCLK which used for host (required)
+ "source_cg" - independent source clock gate (required for MT2712)
+ "bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
+- pinctrl-names: should be "default", "state_uhs"
+- pinctrl-0: should contain default/high speed pin ctrl
+- pinctrl-1: should contain uhs mode pin ctrl
+- vmmc-supply: power to the Core
+- vqmmc-supply: power to the IO
+
+Optional properties:
+- assigned-clocks: PLL of the source clock
+- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
+- hs400-ds-delay: HS400 DS delay setting
+- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
+ If present,HS400 command responses are sampled on rising edges.
+ If not present,HS400 command responses are sampled on falling edges.
+- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
+ error caused by stop clock(fifo full)
+ Valid range = [0:0x7]. if not present, default value is 0.
+ applied to compatible "mediatek,mt2701-mmc".
+- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
+- reset-names: Should be "hrst".
+
+Examples:
+mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
+ reg = <0 0x11230000 0 0x108>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+ vmmc-supply = <&mt6397_vemc_3v3_reg>;
+ vqmmc-supply = <&mt6397_vio18_reg>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0>,
+ <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+ clock-names = "source", "hclk";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+ hs400-ds-delay = <0x14015>;
+ mediatek,hs200-cmd-int-delay = <26>;
+ mediatek,hs400-cmd-int-delay = <14>;
+ mediatek,hs400-cmd-resp-sel-rising;
+};
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
new file mode 100644
index 000000000..bec8f8c71
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS MMC controller
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+ The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
+ to support MMC, SD, and SDIO types of memory cards.
+
+ This file documents differences between the core properties in mmc.txt
+ and the properties used by the mxsmmc driver.
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-mmc
+ - fsl,imx28-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc@80010000 {
+ compatible = "fsl,imx28-mmc";
+ reg = <0x80010000 2000>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ bus-width = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
new file mode 100644
index 000000000..96c0b1440
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -0,0 +1,143 @@
+* NVIDIA Tegra Secure Digital Host Controller
+
+This controller on Tegra family SoCs provides an interface for MMC, SD,
+and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-tegra driver.
+
+Required properties:
+- compatible : should be one of:
+ - "nvidia,tegra20-sdhci": for Tegra20
+ - "nvidia,tegra30-sdhci": for Tegra30
+ - "nvidia,tegra114-sdhci": for Tegra114
+ - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
+ - "nvidia,tegra210-sdhci": for Tegra210
+ - "nvidia,tegra186-sdhci": for Tegra186
+ - "nvidia,tegra194-sdhci": for Tegra194
+- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
+ One for the module clock and one for the timeout clock.
+ For all other Tegra devices, must contain a single entry for
+ the module clock. See ../clocks/clock-bindings.txt for details.
+- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
+ strings 'sdhci' and 'tmclk' to represent the module and
+ the timeout clocks, respectively.
+ For all other Tegra devices must contain the string 'sdhci'
+ to represent the module clock.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - sdhci
+
+Optional properties:
+- power-gpios : Specify GPIOs for power control
+
+Example:
+
+sdhci@c8000200 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000200 0x200>;
+ interrupts = <47>;
+ clocks = <&tegra_car 14>;
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ bus-width = <8>;
+};
+
+Optional properties for Tegra210, Tegra186 and Tegra194:
+- pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
+ configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
+ for controllers supporting multiple voltage levels. The order of names
+ should correspond to the pin configuration states in pinctrl-0 and
+ pinctrl-1.
+- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
+ Tegra210 where pad config registers are in the pinmux register domain
+ for pull-up-strength and pull-down-strength values configuration when
+ using pads at 3V3 and 1V8 levels.
+- nvidia,only-1-8-v : The presence of this property indicates that the
+ controller operates at a 1.8 V fixed I/O voltage.
+- nvidia,pad-autocal-pull-up-offset-3v3,
+ nvidia,pad-autocal-pull-down-offset-3v3 : Specify drive strength
+ calibration offsets for 3.3 V signaling modes.
+- nvidia,pad-autocal-pull-up-offset-1v8,
+ nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
+ calibration offsets for 1.8 V signaling modes.
+- nvidia,pad-autocal-pull-up-offset-3v3-timeout,
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout : Specify drive
+ strength used as a fallback in case the automatic calibration times
+ out on a 3.3 V signaling mode.
+- nvidia,pad-autocal-pull-up-offset-1v8-timeout,
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
+ strength used as a fallback in case the automatic calibration times
+ out on a 1.8 V signaling mode.
+- nvidia,pad-autocal-pull-up-offset-sdr104,
+ nvidia,pad-autocal-pull-down-offset-sdr104 : Specify drive strength
+ calibration offsets for SDR104 mode.
+- nvidia,pad-autocal-pull-up-offset-hs400,
+ nvidia,pad-autocal-pull-down-offset-hs400 : Specify drive strength
+ calibration offsets for HS400 mode.
+- nvidia,default-tap : Specify the default inbound sampling clock
+ trimmer value for non-tunable modes.
+- nvidia,default-trim : Specify the default outbound clock trimmer
+ value.
+- nvidia,dqs-trim : Specify DQS trim value for HS400 timing
+
+ Notes on the pad calibration pull up and pulldown offset values:
+ - The property values are drive codes which are programmed into the
+ PD_OFFSET and PU_OFFSET sections of the
+ SDHCI_TEGRA_AUTO_CAL_CONFIG register.
+ - A higher value corresponds to higher drive strength. Please refer
+ to the reference manual of the SoC for correct values.
+ - The SDR104 and HS400 timing specific values are used in
+ corresponding modes if specified.
+
+ Notes on tap and trim values:
+ - The values are used for compensating trace length differences
+ by adjusting the sampling point.
+ - The values are programmed to the Vendor Clock Control Register.
+ Please refer to the reference manual of the SoC for correct
+ values.
+ - The DQS trim values are only used on controllers which support
+ HS400 timing. Only SDMMC4 on Tegra210 and Tegra 186 supports
+ HS400.
+
+Example:
+sdhci@700b0000 {
+ compatible = "nvidia,tegra124-sdhci";
+ reg = <0x0 0x700b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
+ clock-names = "sdhci";
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ status = "disabled";
+};
+
+sdhci@700b0000 {
+ compatible = "nvidia,tegra210-sdhci";
+ reg = <0x0 0x700b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
new file mode 100644
index 000000000..10f0818a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
@@ -0,0 +1,16 @@
+* Marvell orion-sdio controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the orion-sdio driver.
+
+- compatible: Should be "marvell,orion-sdio"
+- clocks: reference to the clock of the SDIO interface
+
+Example:
+
+ mvsdio@d00d4000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0xd00d4000 0x200>;
+ interrupts = <54>;
+ clocks = <&gateclk 17>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
new file mode 100644
index 000000000..b6ab52708
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/owl-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SD/MMC/SDIO controller
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: actions,owl-mmc
+ - items:
+ - const: actions,s700-mmc
+ - const: actions,owl-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: mmc
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc0: mmc@e0330000 {
+ compatible = "actions,owl-mmc";
+ reg = <0xe0330000 0x4000>;
+ interrupts = <0 42 4>;
+ clocks = <&cmu 56>;
+ resets = <&cmu 23>;
+ dmas = <&dma 2>;
+ dma-names = "mmc";
+ bus-width = <4>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
new file mode 100644
index 000000000..5f5c2bec2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
@@ -0,0 +1,25 @@
+* PXA MMC drivers
+
+Driver bindings for the PXA MCI (MMC/SDIO) interfaces
+
+Required properties:
+- compatible: Should be "marvell,pxa-mmc".
+- vmmc-supply: A regulator for VMMC
+
+Optional properties:
+- marvell,detect-delay-ms: sets the detection delay timeout in ms.
+
+In addition to the properties described in this docuent, the details
+described in mmc.txt are supported.
+
+Examples:
+
+mmc0: mmc@41100000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+ vmmc-supply = <&mmc_regulator>;
+ cd-gpios = <&gpio 23 0>;
+ wp-gpios = <&gpio 24 0>;
+};
+
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
new file mode 100644
index 000000000..291532ac0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -0,0 +1,53 @@
+* Renesas Multi Media Card Interface (MMCIF) Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the MMCIF device.
+
+
+Required properties:
+
+- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a
+ fallback. Examples with <soctype> are:
+ - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs
+ - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs
+ - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
+ - "renesas,mmcif-r8a7742" for the MMCIF found in r8a7742 SoCs
+ - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs
+ - "renesas,mmcif-r8a7744" for the MMCIF found in r8a7744 SoCs
+ - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs
+ - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs
+ - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
+ - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
+ - "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs
+ - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs
+ - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs
+
+- interrupts: Some SoCs have only 1 shared interrupt, while others have either
+ 2 or 3 individual interrupts (error, int, card detect). Below is the number
+ of interrupts for each SoC:
+ 1: r8a73a4, r8a7742, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791,
+ r8a7793, r8a7794
+ 2: r8a7740, sh73a0
+ 3: r7s72100
+
+- clocks: reference to the functional clock
+
+- dmas: reference to the DMA channels, one per channel name listed in the
+ dma-names property.
+- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the
+ receive DMA channel.
+- max-frequency: Maximum operating clock frequency, driver uses default clock
+ frequency if it is not set.
+
+
+Example: R8A7790 (R-Car H2) MMCIF0
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ max-frequency = <97500000>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
new file mode 100644
index 000000000..6bbf29b5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas SDHI SD/MMC controller
+
+maintainers:
+ - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: renesas,sdhi-sh73a0 # R-Mobile APE6
+ - items:
+ - const: renesas,sdhi-r7s72100 # RZ/A1H
+ - items:
+ - const: renesas,sdhi-r7s9210 # SH-Mobile AG5
+ - items:
+ - const: renesas,sdhi-r8a73a4 # R-Mobile APE6
+ - items:
+ - const: renesas,sdhi-r8a7740 # R-Mobile A1
+ - items:
+ - enum:
+ - renesas,sdhi-r8a7778 # R-Car M1
+ - renesas,sdhi-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-sdhi # R-Car Gen1
+ - items:
+ - enum:
+ - renesas,sdhi-r8a7742 # RZ/G1H
+ - renesas,sdhi-r8a7743 # RZ/G1M
+ - renesas,sdhi-r8a7744 # RZ/G1N
+ - renesas,sdhi-r8a7745 # RZ/G1E
+ - renesas,sdhi-r8a77470 # RZ/G1C
+ - renesas,sdhi-r8a7790 # R-Car H2
+ - renesas,sdhi-r8a7791 # R-Car M2-W
+ - renesas,sdhi-r8a7792 # R-Car V2H
+ - renesas,sdhi-r8a7793 # R-Car M2-N
+ - renesas,sdhi-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1
+ - items:
+ - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP)
+ - items:
+ - enum:
+ - renesas,sdhi-r8a774a1 # RZ/G2M
+ - renesas,sdhi-r8a774b1 # RZ/G2N
+ - renesas,sdhi-r8a774c0 # RZ/G2E
+ - renesas,sdhi-r8a774e1 # RZ/G2H
+ - renesas,sdhi-r8a7795 # R-Car H3
+ - renesas,sdhi-r8a7796 # R-Car M3-W
+ - renesas,sdhi-r8a77961 # R-Car M3-W+
+ - renesas,sdhi-r8a77965 # R-Car M3-N
+ - renesas,sdhi-r8a77970 # R-Car V3M
+ - renesas,sdhi-r8a77980 # R-Car V3H
+ - renesas,sdhi-r8a77990 # R-Car E3
+ - renesas,sdhi-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: core
+ - const: cd
+
+ dmas:
+ minItems: 4
+ maxItems: 4
+
+ dma-names:
+ minItems: 4
+ maxItems: 4
+ items:
+ enum:
+ - tx
+ - rx
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ pinctrl-0:
+ minItems: 1
+ maxItems: 2
+
+ pinctrl-1:
+ maxItems: 1
+
+ pinctrl-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: default
+ - const: state_uhs
+
+ max-frequency: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - power-domains
+
+if:
+ properties:
+ compatible:
+ items:
+ enum:
+ - renesas,sdhi-r7s72100
+ - renesas,sdhi-r7s9210
+then:
+ required:
+ - clock-names
+ description:
+ The internal card detection logic that exists in these controllers is
+ sectioned off to be run by a separate second clock source to allow
+ the main core clock to be turned off to save power.
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+
+ sdhi0: mmc@ee100000 {
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee100000 0x328>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ };
+
+ sdhi1: mmc@ee120000 {
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee120000 0x328>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
+ };
+
+ sdhi2: mmc@ee140000 {
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee140000 0x100>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ };
+
+ sdhi3: mmc@ee160000 {
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee160000 0x100>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
new file mode 100644
index 000000000..3762f1c8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip designware mobile storage host controller device tree bindings
+
+description:
+ Rockchip uses the Synopsys designware mobile storage host controller
+ to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+ This file documents the combined properties for the core Synopsys dw mshc
+ controller that are not already included in the synopsys-dw-mshc-common.yaml
+ file and the Rockchip specific extensions.
+
+allOf:
+ - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ oneOf:
+ # for Rockchip RK2928 and before RK3288
+ - const: rockchip,rk2928-dw-mshc
+ # for Rockchip RK3288
+ - const: rockchip,rk3288-dw-mshc
+ - items:
+ - enum:
+ # for Rockchip PX30
+ - rockchip,px30-dw-mshc
+ # for Rockchip RK3036
+ - rockchip,rk3036-dw-mshc
+ # for Rockchip RK322x
+ - rockchip,rk3228-dw-mshc
+ # for Rockchip RK3308
+ - rockchip,rk3308-dw-mshc
+ # for Rockchip RK3328
+ - rockchip,rk3328-dw-mshc
+ # for Rockchip RK3368
+ - rockchip,rk3368-dw-mshc
+ # for Rockchip RK3399
+ - rockchip,rk3399-dw-mshc
+ # for Rockchip RV1108
+ - rockchip,rv1108-dw-mshc
+ - const: rockchip,rk3288-dw-mshc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+ description:
+ Handle to "biu" and "ciu" clocks for the bus interface unit clock and
+ the card interface unit clock. If "ciu-drive" and "ciu-sample" are
+ specified in clock-names, it should also contain
+ handles to these clocks.
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: biu
+ - const: ciu
+ - const: ciu-drive
+ - const: ciu-sample
+ description:
+ Apart from the clock-names "biu" and "ciu" two more clocks
+ "ciu-drive" and "ciu-sample" are supported. They are used
+ to control the clock phases, "ciu-sample" is required for tuning
+ high speed modes.
+
+ rockchip,default-sample-phase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 360
+ default: 0
+ description:
+ The default phase to set "ciu-sample" at probing,
+ low speeds or in case where all phases work at tuning time.
+ If not specified 0 deg will be used.
+
+ rockchip,desired-num-phases:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 360
+ default: 360
+ description:
+ The desired number of times that the host execute tuning when needed.
+ If not specified, the host will do tuning for 360 times,
+ namely tuning for each degree.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ sdmmc: mmc@ff0c0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0xff0c0000 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
new file mode 100644
index 000000000..5f68feb9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
@@ -0,0 +1,42 @@
+* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
+
+Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
+with external MMC, SD and SDIO storage mediums.
+
+This file documents differences between the core mmc properties described by
+mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
+implementation.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
+ - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
+ - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
+- reg: register location and length
+- interrupts: mmc controller interrupt
+- clocks: Should reference the controller clock
+- clock-names: Should contain "sdi"
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Optional Properties:
+- bus-width: number of data lines (see mmc.txt)
+- cd-gpios: gpio for card detection (see mmc.txt)
+- wp-gpios: gpio for write protection (see mmc.txt)
+
+Example:
+
+ mmc0: mmc@5a000000 {
+ compatible = "samsung,s3c2440-sdi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdi_pins>;
+ reg = <0x5a000000 0x100000>;
+ interrupts = <0 0 21 3>;
+ clocks = <&clocks PCLK_SDI>;
+ clock-names = "sdi";
+ bus-width = <4>;
+ cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
new file mode 100644
index 000000000..42e0a9afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
@@ -0,0 +1,32 @@
+* Samsung's SDHCI Controller device tree bindings
+
+Samsung's SDHCI controller is used as a connectivity interface with external
+MMC, SD and eMMC storage mediums. This file documents differences between the
+core mmc properties described by mmc.txt and the properties used by the
+Samsung implementation of the SDHCI controller.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
+ controller.
+ - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
+ controller.
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Example:
+ sdhci@12530000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12530000 0x100>;
+ interrupts = <0 75 0>;
+ bus-width = <4>;
+ cd-gpios = <&gpk2 2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+ };
+
+ Note: This example shows both SoC specific and board specific properties
+ in a single device node. The properties can be actually be separated
+ into SoC specific node and board specific node.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
new file mode 100644
index 000000000..1ae945434
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI AM654 MMC Controller
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am654-sdhci-5.1
+ - ti,j721e-sdhci-8bit
+ - ti,j721e-sdhci-4bit
+ - ti,j7200-sdhci-8bit
+ - ti,j721e-sdhci-4bit
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+ description: Handles to input clocks
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: clk_ahb
+ - const: clk_xin
+
+ # PHY output tap delays:
+ # Used to delay the data valid window and align it to the sampling clock.
+ # Binding needs to be provided for each supported speed mode otherwise the
+ # corresponding mode will be disabled.
+
+ ti,otap-del-sel-legacy:
+ description: Output tap delay for SD/MMC legacy timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-mmc-hs:
+ description: Output tap delay for MMC high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sd-hs:
+ description: Output tap delay for SD high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr12:
+ description: Output tap delay for SD UHS SDR12 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr25:
+ description: Output tap delay for SD UHS SDR25 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr50:
+ description: Output tap delay for SD UHS SDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr104:
+ description: Output tap delay for SD UHS SDR104 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-ddr50:
+ description: Output tap delay for SD UHS DDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-ddr52:
+ description: Output tap delay for eMMC DDR52 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-hs200:
+ description: Output tap delay for eMMC HS200 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-hs400:
+ description: Output tap delay for eMMC HS400 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ # PHY input tap delays:
+ # Used to delay the data valid window and align it to the sampling clock for
+ # modes that don't support tuning
+
+ ti,itap-del-sel-legacy:
+ description: Input tap delay for SD/MMC legacy timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-mmc-hs:
+ description: Input tap delay for MMC high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-sd-hs:
+ description: Input tap delay for SD high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-sdr12:
+ description: Input tap delay for SD UHS SDR12 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-sdr25:
+ description: Input tap delay for SD UHS SDR25 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-ddr52:
+ description: Input tap delay for MMC DDR52 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,trm-icp:
+ description: DLL trim select
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,driver-strength-ohm:
+ description: DLL drive strength in ohms
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum:
+ - 33
+ - 40
+ - 50
+ - 66
+ - 100
+
+ ti,strobe-sel:
+ description: strobe select delay for HS400 speed mode.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ ti,clkbuf-sel:
+ description: Clock Delay Buffer Select
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ti,otap-del-sel-legacy
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mmc0: mmc@4f80000 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+ power-domains = <&k3_pds 47>;
+ clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci-caps-mask = <0x80000007 0x0>;
+ mmc-ddr-1_8v;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x5>;
+ ti,otap-del-sel-hs400 = <0x0>;
+ ti,itap-del-sel-legacy = <0x10>;
+ ti,itap-del-sel-mmc-hs = <0xa>;
+ ti,itap-del-sel-ddr52 = <0x3>;
+ ti,trm-icp = <0x8>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
new file mode 100644
index 000000000..69edfd4d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
@@ -0,0 +1,33 @@
+* Atmel SDHCI controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
+sdhci-of-at91 driver.
+
+Required properties:
+- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci".
+- clocks: Phandlers to the clocks.
+- clock-names: Must be "hclock", "multclk", "baseclk" for
+ "atmel,sama5d2-sdhci".
+ Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
+
+Optional properties:
+- assigned-clocks: The same with "multclk".
+- assigned-clock-rates The rate of "multclk" in order to not rely on the
+ gck configuration set by previous components.
+- microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
+ inverted. The default polarity for this signal is described in the datasheet.
+ For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
+ and a capacitor (see "SDMMC I/O Calibration" chapter).
+
+Example:
+
+mmc0: sdio-host@a0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ assigned-clocks = <&sdmmc0_gclk>;
+ assigned-clock-rates = <480000000>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
new file mode 100644
index 000000000..ae9aab9ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
@@ -0,0 +1,14 @@
+* Marvell sdhci-dove controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
+
+- compatible: Should be "marvell,dove-sdhci".
+
+Example:
+
+sdio0: sdio@92000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x92000 0x100>;
+ interrupts = <35>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
new file mode 100644
index 000000000..3ee9263ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
@@ -0,0 +1,32 @@
+* Fujitsu SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_f_sdh30 driver.
+
+Required properties:
+- compatible: "fujitsu,mb86s70-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+ list of phandles and clock-specifier pairs.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+ "iface" - clock used for sdhci interface
+ "core" - core clock for sdhci controller
+
+Optional properties:
+- vqmmc-supply: phandle to the regulator device tree node, mentioned
+ as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
+ requires the CMD_DAT_DELAY control to be enabled.
+
+Example:
+
+ sdhci1: mmc@36600000 {
+ compatible = "fujitsu,mb86s70-sdhci-3.0";
+ reg = <0 0x36600000 0x1000>;
+ interrupts = <0 172 0x4>,
+ <0 173 0x4>;
+ bus-width = <4>;
+ vqmmc-supply = <&vccq_sdhci1>;
+ clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+ clock-names = "iface", "core";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
new file mode 100644
index 000000000..627ee89c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
@@ -0,0 +1,30 @@
+* SOCIONEXT Milbeaut SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_milbeaut driver.
+
+Required properties:
+- compatible: "socionext,milbeaut-m10v-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+ list of phandles and clock-specifier pairs.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+ "iface" - clock used for sdhci interface
+ "core" - core clock for sdhci controller
+
+Optional properties:
+- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
+ requires the CMD_DAT_DELAY control to be enabled.
+
+Example:
+ sdhci3: mmc@1b010000 {
+ compatible = "socionext,milbeaut-m10v-sdhci-3.0";
+ reg = <0x1b010000 0x10000>;
+ interrupts = <0 265 0x4>;
+ voltage-ranges = <3300 3300>;
+ bus-width = <4>;
+ clocks = <&clk 7>, <&ahb_clk>;
+ clock-names = "core", "iface";
+ cap-sdio-irq;
+ fujitsu,cmd-dat-delay-select;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
new file mode 100644
index 000000000..3b602fd61
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -0,0 +1,115 @@
+* Qualcomm SDHCI controller (sdhci-msm)
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-msm driver.
+
+Required properties:
+- compatible: Should contain a SoC-specific string and a IP version string:
+ version strings:
+ "qcom,sdhci-msm-v4" for sdcc versions less than 5.0
+ "qcom,sdhci-msm-v5" for sdcc version 5.0
+ For SDCC version 5.0.0, MCI registers are removed from SDCC
+ interface and some registers are moved to HC. New compatible
+ string is added to support this change - "qcom,sdhci-msm-v5".
+ full compatible strings with SoC and version:
+ "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
+ "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
+ "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
+ "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
+ "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
+ "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"
+ "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
+ "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
+ "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+ NOTE that some old device tree files may be floating around that only
+ have the string "qcom,sdhci-msm-v4" without the SoC compatible string
+ but doing that should be considered a deprecated practice.
+
+- reg: Base address and length of the register in the following order:
+ - Host controller register map (required)
+ - SD Core register map (required for controllers earlier than msm-v5)
+ - CQE register map (Optional, CQE support is present on SDHC instance meant
+ for eMMC and version v4.2 and above)
+- reg-names: When CQE register map is supplied, below reg-names are required
+ - "hc" for Host controller register map
+ - "core" for SD core register map
+ - "cqhci" for CQE register map
+- interrupts: Should contain an interrupt-specifiers for the interrupts:
+ - Host controller interrupt (required)
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
+- clock-names: Should contain the following:
+ "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
+ "core" - SDC MMC clock (MCLK) (required)
+ "bus" - SDCC bus voter clock (optional)
+ "xo" - TCXO clock (optional)
+ "cal" - reference clock for RCLK delay calibration (optional)
+ "sleep" - sleep clock for RCLK delay calibration (optional)
+
+- qcom,ddr-config: Certain chipsets and platforms require particular settings
+ for the DDR_CONFIG register. Use this field to specify the register
+ value as per the Hardware Programming Guide.
+
+- qcom,dll-config: Chipset and Platform specific value. Use this field to
+ specify the DLL_CONFIG register value as per Hardware Programming Guide.
+
+Optional Properties:
+* Following bus parameters are required for interconnect bandwidth scaling:
+- interconnects: Pairs of phandles and interconnect provider specifier
+ to denote the edge source and destination ports of
+ the interconnect path.
+
+- interconnect-names: For sdhc, we have two main paths.
+ 1. Data path : sdhc to ddr
+ 2. Config path : cpu to sdhc
+ For Data interconnect path the name supposed to be
+ is "sdhc-ddr" and for config interconnect path it is
+ "cpu-sdhc".
+ Please refer to Documentation/devicetree/bindings/
+ interconnect/ for more details.
+
+Example:
+
+ sdhc_1: sdhci@f9824900 {
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ interrupts = <0 123 0>;
+ bus-width = <8>;
+ non-removable;
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
+ <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
+
+ qcom,dll-config = <0x000f642c>;
+ qcom,ddr-config = <0x80040868>;
+ };
+
+ sdhc_2: sdhci@f98a4900 {
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ interrupts = <0 125 0>;
+ bus-width = <4>;
+ cd-gpios = <&msmgpio 62 0x1>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
new file mode 100644
index 000000000..ee4253b33
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt
@@ -0,0 +1,20 @@
+* Synopsys DesignWare Cores Mobile Storage Host Controller
+
+Required properties:
+- compatible: should be one of the following:
+ "snps,dwcmshc-sdhci"
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: Array of clocks required for SDHCI; requires at least one for
+ core clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for optional bus clock.
+
+Example:
+ sdhci2: sdhci@aa0000 {
+ compatible = "snps,dwcmshc-sdhci";
+ reg = <0xaa0000 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&emmcclk>;
+ bus-width = <8>;
+ }
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
new file mode 100644
index 000000000..aeb615ef6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
@@ -0,0 +1,36 @@
+* TI OMAP SDHCI Controller
+
+Refer to mmc.txt for standard MMC bindings.
+
+For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning.
+
+Required properties:
+- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+ Should be "ti,k2g-sdhci" for K2G
+ Should be "ti,am335-sdhci" for am335x controllers
+ Should be "ti,am437-sdhci" for am437x controllers
+- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
+ (Not required for K2G).
+- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
+ "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104",
+ "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11",
+ "hs200_1_8v",
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+
+Optional properties:
+- dmas: List of DMA specifiers with the controller specific format as described
+ in the generic DMA client binding. A tx and rx specifier is required.
+- dma-names: List of DMA request names. These strings correspond 1:1 with the
+ DMA specifiers listed in dmas. The string naming is to be "tx"
+ and "rx" for TX and RX DMA requests, respectively.
+
+Example:
+ mmc1: mmc@4809c000 {
+ compatible = "ti,dra7-sdhci";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
new file mode 100644
index 000000000..aa1248064
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA SDHCI v2/v3 bindings
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,armada-380-sdhci
+ then:
+ properties:
+ regs:
+ minItems: 3
+ reg-names:
+ minItems: 3
+ required:
+ - reg-names
+ else:
+ properties:
+ regs:
+ maxItems: 1
+ reg-names:
+ maxItems: 1
+
+properties:
+ compatible:
+ enum:
+ - mrvl,pxav2-mmc
+ - mrvl,pxav3-mmc
+ - marvell,armada-380-sdhci
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: sdhci
+ - const: mbus
+ - const: conf-sdio3
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: io
+ - const: core
+
+ mrvl,clk-delay-cycles:
+ description: Specify a number of cycles to delay for tuning.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/berlin2.h>
+ mmc@d4280800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xd4280800 0x800>;
+ bus-width = <8>;
+ interrupts = <27>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
+ non-removable;
+ mrvl,clk-delay-cycles = <31>;
+ };
+ - |
+ mmc@d8000 {
+ compatible = "marvell,armada-380-sdhci";
+ reg-names = "sdhci", "mbus", "conf-sdio3";
+ reg = <0xd8000 0x1000>,
+ <0xdc000 0x100>,
+ <0x18454 0x4>;
+ interrupts = <0 25 0x4>;
+ clocks = <&gateclk 17>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <0x1F>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt
new file mode 100644
index 000000000..dd6ed464b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt
@@ -0,0 +1,18 @@
+* SiRFprimII/marco/atlas6 SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-sirf driver.
+
+Required properties:
+- compatible: sirf,prima2-sdhc
+
+Optional properties:
+- cd-gpios: card detect gpio, with zero flags.
+
+Example:
+
+ sd0: sdhci@56000000 {
+ compatible = "sirf,prima2-sdhc";
+ reg = <0xcd000000 0x100000>;
+ cd-gpios = <&gpio 6 0>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt
new file mode 100644
index 000000000..fd3643e7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt
@@ -0,0 +1,18 @@
+* SPEAr SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-spear driver.
+
+Required properties:
+- compatible: "st,spear300-sdhci"
+
+Optional properties:
+- cd-gpios: card detect gpio, with zero flags.
+
+Example:
+
+ sdhci@fc000000 {
+ compatible = "st,spear300-sdhci";
+ reg = <0xfc000000 0x1000>;
+ cd-gpios = <&gpio0 6 0>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
new file mode 100644
index 000000000..eb7eb1b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
@@ -0,0 +1,67 @@
+* Spreadtrum SDHCI controller (sdhci-sprd)
+
+The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
+for MMC, SD and SDIO types of cards.
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-sprd driver.
+
+Required properties:
+- compatible: Should contain "sprd,sdhci-r11".
+- reg: physical base address of the controller and length.
+- interrupts: Interrupts used by the SDHCI controller.
+- clocks: Should contain phandle for the clock feeding the SDHCI controller
+- clock-names: Should contain the following:
+ "sdio" - SDIO source clock (required)
+ "enable" - gate clock which used for enabling/disabling the device (required)
+ "2x_enable" - gate clock controlling the device for some special platforms (optional)
+
+Optional properties:
+- assigned-clocks: the same with "sdio" clock
+- assigned-clock-parents: the default parent of "sdio" clock
+- pinctrl-names: should be "default", "state_uhs"
+- pinctrl-0: should contain default/high speed pin control
+- pinctrl-1: should contain uhs mode pin control
+
+PHY DLL delays are used to delay the data valid window, and align the window
+to sampling clock. PHY DLL delays can be configured by following properties,
+and each property contains 4 cells which are used to configure the clock data
+write line delay value, clock read command line delay value, clock read data
+positive edge delay value and clock read data negative edge delay value.
+Each cell's delay value unit is cycle of the PHY clock.
+
+- sprd,phy-delay-legacy: Delay value for legacy timing.
+- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing.
+- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing.
+- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
+- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing.
+- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing.
+- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing.
+- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing.
+- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing.
+
+Examples:
+
+sdio0: sdio@20600000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0 0x20600000 0 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-names = "sdio", "enable";
+ clocks = <&ap_clk CLK_EMMC_2X>,
+ <&apahb_gate CLK_EMMC_EB>;
+ assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+ assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+
+ sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
new file mode 100644
index 000000000..ccf82b4ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -0,0 +1,110 @@
+* STMicroelectronics sdhci-st MMC/SD controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties
+used by the sdhci-st driver.
+
+Required properties:
+- compatible: Must be "st,sdhci" and it can be compatible to "st,sdhci-stih407"
+ to set the internal glue logic used for configuring the MMC
+ subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
+ family).
+
+- clock-names: Should be "mmc" and "icn". (NB: The latter is not compulsory)
+ See: Documentation/devicetree/bindings/resource-names.txt
+- clocks: Phandle to the clock.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+- interrupts: One mmc interrupt should be described here.
+- interrupt-names: Should be "mmcirq".
+
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller.
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+- reg: This must provide the host controller base address and it can also
+ contain the FlashSS Top register for TX/RX delay used by the driver
+ to configure DLL inside the flashSS, if so reg-names must also be
+ specified.
+
+Optional properties:
+- reg-names: Should be "mmc" and "top-mmc-delay". "top-mmc-delay" is optional
+ for eMMC on stih407 family silicon to configure DLL inside FlashSS.
+
+- non-removable: Non-removable slot. Also used for configuring mmcss in STiH407 SoC
+ family.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- bus-width: Number of data lines.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- max-frequency: Can be 200MHz, 100MHz or 50MHz (default) and used for
+ configuring the CCONFIG3 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- resets: Phandle and reset specifier pair to softreset line of HC IP.
+ See: Documentation/devicetree/bindings/reset/reset.txt
+
+- vqmmc-supply: Phandle to the regulator dt node, mentioned as the vcc/vdd
+ supply in eMMC/SD specs.
+
+- sd-uhs-sdr50: To enable the SDR50 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-sdr104: To enable the SDR104 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-ddr50: To enable the DDR50 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+Example:
+
+/* Example stih416e eMMC configuration */
+
+mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ bus-width = <8>
+
+/* Example SD stih407 family configuration */
+
+mmc1: sdhci@9080000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ reg = <0x09080000 0x7ff>;
+ reg-names = "mmc";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+ resets = <&softreset STIH407_MMC1_SOFTRESET>;
+ bus-width = <4>;
+};
+
+/* Example eMMC stih407 family configuration */
+
+mmc0: sdhci@9060000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+ reg-names = "mmc", "top-mmc-delay";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ vqmmc-supply = <&vmmc_reg>;
+ max-frequency = <200000000>;
+ bus-width = <8>;
+ non-removable;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci.txt b/Documentation/devicetree/bindings/mmc/sdhci.txt
new file mode 100644
index 000000000..0e9923a64
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci.txt
@@ -0,0 +1,13 @@
+The properties specific for SD host controllers. For properties shared by MMC
+host controllers refer to the mmc[1] bindings.
+
+ [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Optional properties:
+- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
+ property corresponds to the bits in the sdhci capability register. If the bit
+ is on in the mask then the bit is incorrect in the register and should be
+ turned off, before applying sdhci-caps.
+- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit
+ property corresponds to the bits in the sdhci capability register. If the
+ bit is on in the property then the bit should be turned on.
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 000000000..4897bea7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,23 @@
+* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
+
+Example:
+
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 129 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
new file mode 100644
index 000000000..56f9ff127
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SD/SDIO/eMMC controller
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+ compatible:
+ description: version 2.91, 3.1, 3.1.1, respectively
+ enum:
+ - socionext,uniphier-sd-v2.91
+ - socionext,uniphier-sd-v3.1
+ - socionext,uniphier-sd-v3.1.1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ reset-names:
+ description: |
+ There are three reset signals at maximum
+ host: mandatory for all variants
+ bridge: exist only for version 2.91
+ hw: optional. exist if eMMC hw reset line is available
+ oneOf:
+ - const: host
+ - items:
+ - const: host
+ - const: bridge
+ - items:
+ - const: host
+ - const: hw
+ - items:
+ - const: host
+ - const: bridge
+ - const: hw
+
+ resets:
+ minItems: 1
+ maxItems: 3
+
+allOf:
+ - $ref: mmc-controller.yaml
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: socionext,uniphier-sd-v2.91
+ then:
+ properties:
+ reset-names:
+ contains:
+ const: bridge
+ else:
+ properties:
+ reset-names:
+ not:
+ contains:
+ const: bridge
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - reset-names
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sd: mmc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 000000000..8dfad89c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+ - $ref: "mmc-controller.yaml#"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: reset
+
+ clock-frequency:
+ description:
+ Should be the frequency (in Hz) of the ciu clock. If this
+ is specified and the ciu clock is specified then we'll try to set the ciu
+ clock to this at probe time.
+
+ fifo-depth:
+ description:
+ The maximum size of the tx/rx fifo's. If this property is not
+ specified, the default value of the fifo size is determined from the
+ controller registers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ card-detect-delay:
+ description:
+ Delay in milli-seconds before detecting card after card
+ insert event. The default value is 0.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ data-addr:
+ description:
+ Override fifo address with value provided by DT. The default FIFO reg
+ offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+ by driver. If the controller does not follow this rule, please use
+ this property to set fifo address in device tree.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ fifo-watermark-aligned:
+ description:
+ Data done irq is expected if data length is less than
+ watermark in PIO mode. But fifo watermark is requested to be aligned
+ with data length in some SoC so that TX/RX irq can be generated with
+ data done irq. Add this watermark quirk to mark this requirement and
+ force fifo watermark setting accordingly.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
new file mode 100644
index 000000000..240abb6f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Binding
+
+allOf:
+ - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ const: snps,dw-mshc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+ description:
+ Handle to "biu" and "ciu" clocks for the
+ bus interface unit clock and the card interface unit clock.
+
+ clock-names:
+ items:
+ - const: biu
+ - const: ciu
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mmc@12200000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ clocks = <&clock 351>, <&clock 132>;
+ clock-names = "biu", "ciu";
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ resets = <&rst 20>;
+ reset-names = "reset";
+ vmmc-supply = <&buck8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ max-frequency = <200000000>;
+ clock-frequency = <400000000>;
+ data-addr = <0x200>;
+ fifo-depth = <0x80>;
+ fifo-watermark-aligned;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
new file mode 100644
index 000000000..4a9145ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -0,0 +1,134 @@
+* TI Highspeed MMC host controller for OMAP and 66AK2G family.
+
+The Highspeed MMC Host Controller on TI OMAP and 66AK2G family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap_hsmmc driver.
+
+Required properties:
+--------------------
+- compatible:
+ Should be "ti,omap2-hsmmc", for OMAP2 controllers
+ Should be "ti,omap3-hsmmc", for OMAP3 controllers
+ Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
+ Should be "ti,omap4-hsmmc", for OMAP4 controllers
+ Should be "ti,am33xx-hsmmc", for AM335x controllers
+ Should be "ti,k2g-hsmmc", "ti,omap4-hsmmc" for 66AK2G controllers.
+
+SoC specific required properties:
+---------------------------------
+The following are mandatory properties for OMAPs, AM33xx and AM43xx SoCs only:
+- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+ and an args specifier containing the MMC device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+- clocks: Must contain an entry for each entry in clock-names. Should
+ be defined as per the he appropriate clock bindings consumer
+ usage in Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+- clock-names: Shall be "fck" for the functional clock,
+ and "mmchsdb_fck" for the debounce clock.
+
+
+Optional properties:
+--------------------
+- ti,dual-volt: boolean, supports dual voltage cards
+- <supply-name>-supply: phandle to the regulator device tree node
+ "supply-name" examples are "vmmc",
+ "vmmc_aux"(deprecated)/"vqmmc" etc
+- ti,non-removable: non-removable slot (like eMMC)
+- ti,needs-special-reset: Requires a special softreset sequence
+- ti,needs-special-hs-handling: HSMMC IP needs special setting
+ for handling High Speed
+- dmas: List of DMA specifiers with the controller specific
+ format as described in the generic DMA client
+ binding. A tx and rx specifier is required.
+- dma-names: List of DMA request names. These strings correspond
+ 1:1 with the DMA specifiers listed in dmas.
+ The string naming is to be "rx" and "tx" for
+ RX and TX DMA requests, respectively.
+
+Examples:
+
+[hwmod populated DMA resources]
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ };
+
+[generic DMA request binding]
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
+ };
+
+[workaround for missing swakeup on am33xx]
+
+This SOC is missing the swakeup line, it will not detect SDIO irq
+while in suspend.
+
+ ------
+ | PRCM |
+ ------
+ ^ |
+ swakeup | | fclk
+ | v
+ ------ ------- -----
+ | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU |
+ ------ ------- -----
+
+In suspend the fclk is off and the module is disfunctional. Even register reads
+will fail. A small logic in the host will request fclk restore, when an
+external event is detected. Once the clock is restored, the host detects the
+event normally. Since am33xx doesn't have this line it never wakes from
+suspend.
+
+The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make
+this work, we need to set the named pinctrl states "default" and "idle".
+Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio
+dat1. The MMC driver will then toggle between idle and default state during
+runtime.
+
+In summary:
+1. select matching 'compatible' section, see example below.
+2. specify pinctrl states "default" and "idle", "sleep" is optional.
+3. specify the gpio irq used for detecting sdio irq in suspend
+
+If configuration is incomplete, a warning message is emitted "falling back to
+polling". Also check the "sdio irq mode" in /sys/kernel/debug/mmc0/regs. Mind
+not every application needs SDIO irq, e.g. MMC cards.
+
+ mmc1: mmc@48060100 {
+ compatible = "ti,am33xx-hsmmc";
+ ...
+ pinctrl-names = "default", "idle", "sleep"
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-1 = <&mmc1_idle>;
+ pinctrl-2 = <&mmc1_sleep>;
+ ...
+ interrupts-extended = <&intc 64 &gpio2 28 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ mmc1_idle : pinmux_cirq_pin {
+ pinctrl-single,pins = <
+ 0x0f8 0x3f /* GPIO2_28 */
+ >;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
new file mode 100644
index 000000000..02fd31cf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -0,0 +1,26 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
new file mode 100644
index 000000000..6d1b7971d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
@@ -0,0 +1,39 @@
+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible: must be
+ "renesas,usdhi6rol0"
+- interrupts: 3 interrupts, named "card detect", "data" and "SDIO" must be
+ specified
+- clocks: a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply: a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply: a phandle of a regulator, supplying VccQ to the card
+- pinctrl-names: Can contain a "default" entry and a "state_uhs"
+ entry. The state_uhs entry is used together with the default
+ entry when the board requires distinct settings for UHS speeds.
+
+- pinctrl-N: One property for each name listed in pinctrl-names, see
+ ../pinctrl/pinctrl-bindings.txt.
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+ compatible = "renesas,usdhi6rol0";
+ reg = <0xab000000 0x200>;
+ interrupts = <0 23 0x4
+ 0 24 0x4
+ 0 25 0x4>;
+ interrupt-names = "card detect", "data", "SDIO";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-power-off-card;
+ clocks = <&imclk>;
+ vmmc-supply = <&vcc_sd0>;
+ vqmmc-supply = <&vccq_sd0>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
new file mode 100644
index 000000000..d7fb6abb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
@@ -0,0 +1,23 @@
+* Wondermedia WM8505/WM8650 SD/MMC Host Controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the wmt-sdmmc driver.
+
+Required properties:
+- compatible: Should be "wm,wm8505-sdhc".
+- interrupts: Two interrupts are required - regular irq and dma irq.
+
+Optional properties:
+- sdon-inverted: SD_ON bit is inverted on the controller
+
+Examples:
+
+sdhc@d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x1000>;
+ interrupts = <20 21>;
+ clocks = <&sdhc>;
+ bus-width = <4>;
+ sdon-inverted;
+};
+
diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
new file mode 100644
index 000000000..0f59bd536
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
@@ -0,0 +1,31 @@
+* ZTE specific extensions to the Synopsys Designware Mobile Storage
+ Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the ZTE specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "zte,zx296718-dw-mshc": for ZX SoCs
+
+Example:
+
+ mmc1: mmc@1110000 {
+ compatible = "zte,zx296718-dw-mshc";
+ reg = <0x01110000 0x1000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <32>;
+ data-addr = <0x200>;
+ fifo-watermark-aligned;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
+ clock-names = "biu", "ciu";
+ max-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ };