summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/gpmi-nand.yaml')
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.yaml124
1 files changed, 124 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
new file mode 100644
index 000000000..28ff8c581
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale General-Purpose Media Interface (GPMI) binding
+
+maintainers:
+ - Han Xu <han.xu@nxp.com>
+
+allOf:
+ - $ref: "nand-controller.yaml"
+
+description: |
+ The GPMI nand controller provides an interface to control the NAND
+ flash chips. The device tree may optionally contain sub-nodes
+ describing partitions of the address space. See partition.txt for
+ more detail.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx23-gpmi-nand
+ - fsl,imx28-gpmi-nand
+ - fsl,imx6q-gpmi-nand
+ - fsl,imx6sx-gpmi-nand
+ - fsl,imx7d-gpmi-nand
+ - items:
+ - enum:
+ - fsl,imx8mm-gpmi-nand
+ - fsl,imx8mn-gpmi-nand
+ - const: fsl,imx7d-gpmi-nand
+
+ reg:
+ items:
+ - description: Address and length of gpmi block.
+ - description: Address and length of bch block.
+
+ reg-names:
+ items:
+ - const: gpmi-nand
+ - const: bch
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: bch
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+ items:
+ - description: SoC gpmi io clock
+ - description: SoC gpmi apb clock
+ - description: SoC gpmi bch clock
+ - description: SoC gpmi bch apb clock
+ - description: SoC per1 bch clock
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
+ items:
+ - const: gpmi_io
+ - const: gpmi_apb
+ - const: gpmi_bch
+ - const: gpmi_bch_apb
+ - const: per1_bch
+
+ fsl,use-minimum-ecc:
+ type: boolean
+ description: |
+ Protect this NAND flash with the minimum ECC strength required.
+ The required ECC strength is automatically discoverable for some
+ flash (e.g., according to the ONFI standard). However, note that
+ if this strength is not discoverable or this property is not enabled,
+ the software may chooses an implementation-defined ECC scheme.
+
+ fsl,no-blockmark-swap:
+ type: boolean
+ description: |
+ Don't swap the bad block marker from the OOB area with the byte in
+ the data area but rely on the flash based BBT for identifying bad blocks.
+ NOTE: this is only valid in conjunction with 'nand-on-flash-bbt'.
+ WARNING: on i.MX28 blockmark swapping cannot be disabled for the BootROM
+ in the FCB. Thus, partitions written from Linux with this feature turned
+ on may not be accessible by the BootROM code.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ nand-controller@8000c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-gpmi-nand";
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <41>;
+ interrupt-names = "bch";
+ clocks = <&clks 50>;
+ clock-names = "gpmi_io";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
+ };