summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/net/can/tcan4x5x.txt40
1 files changed, 40 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
new file mode 100644
index 000000000..e3501bfa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -0,0 +1,40 @@
+Texas Instruments TCAN4x5x CAN Controller
+================================================
+
+This file provides device node information for the TCAN4x5x interface contains.
+
+Required properties:
+ - compatible: "ti,tcan4x5x"
+ - reg: 0
+ - #address-cells: 1
+ - #size-cells: 0
+ - spi-max-frequency: Maximum frequency of the SPI bus the chip can
+ operate at should be less than or equal to 18 MHz.
+ - interrupt-parent: the phandle to the interrupt controller which provides
+ the interrupt.
+ - interrupts: interrupt specification for data-ready.
+
+See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional
+required property details.
+
+Optional properties:
+ - reset-gpios: Hardwired output GPIO. If not defined then software
+ reset.
+ - device-state-gpios: Input GPIO that indicates if the device is in
+ a sleep state or if the device is active.
+ - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
+
+Example:
+tcan4x5x: tcan4x5x@0 {
+ compatible = "ti,tcan4x5x";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <10000000>;
+ bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+ device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+};