summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc/nxp-nci.txt')
-rw-r--r--Documentation/devicetree/bindings/net/nfc/nxp-nci.txt33
1 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
new file mode 100644
index 000000000..9e4dc510a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -0,0 +1,33 @@
+* NXP Semiconductors NXP NCI NFC Controllers
+
+Required properties:
+- compatible: Should be "nxp,nxp-nci-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the chip
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
+
+&i2c2 {
+
+
+ npc100: npc100@29 {
+
+ compatible = "nxp,nxp-nci-i2c";
+
+ reg = <0x29>;
+ clock-frequency = <100000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+};