summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/nixge.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/net/nixge.txt92
1 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
new file mode 100644
index 000000000..85d7240a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nixge.txt
@@ -0,0 +1,92 @@
+* NI XGE Ethernet controller
+
+Required properties:
+- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
+ older device trees with DMA engines co-located in the address map,
+ with the one reg entry to describe the whole device.
+- reg: Address and length of the register set for the device. It contains the
+ information of registers in the same order as described by reg-names.
+- reg-names: Should contain the reg names
+ "dma": DMA engine control and status region
+ "ctrl": MDIO and PHY control and status region
+- interrupts: Should contain tx and rx interrupt
+- interrupt-names: Should be "rx" and "tx"
+- phy-mode: See ethernet.txt file in the same directory.
+- nvmem-cells: Phandle of nvmem cell containing the MAC address
+- nvmem-cell-names: Should be "address"
+
+Optional properties:
+- mdio subnode to indicate presence of MDIO controller
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+ Use instead of phy-handle.
+- phy-handle: See ethernet.txt file in the same directory.
+
+Examples (10G generic PHY):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-3.00";
+ reg = <0x40000000 0x4000
+ 0x41002000 0x2000>;
+ reg-names = "dma", "ctrl";
+
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+ phy-handle = <&ethernet_phy1>;
+
+ mdio {
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
+ };
+
+Examples (10G generic PHY, no MDIO):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-2.00";
+ reg = <0x40000000 0x6000>;
+
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+ phy-handle = <&ethernet_phy1>;
+ };
+
+Examples (1G generic fixed-link + MDIO):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-2.00";
+ reg = <0x40000000 0x6000>;
+
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+
+ fixed-link {
+ speed = <1000>;
+ pause;
+ link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>;
+ };
+
+ mdio {
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ };