summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/layerscape-pci.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pci.txt67
1 files changed, 67 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
new file mode 100644
index 000000000..daa99f7d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -0,0 +1,67 @@
+Freescale Layerscape PCIe controller
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+ RC mode:
+ "fsl,ls1021a-pcie"
+ "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
+ "fsl,ls2088a-pcie"
+ "fsl,ls1088a-pcie"
+ "fsl,ls1046a-pcie"
+ "fsl,ls1043a-pcie"
+ "fsl,ls1012a-pcie"
+ "fsl,ls1028a-pcie"
+ EP mode:
+ "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ "intr": The interrupt that is asserted for controller interrupts
+- fsl,pcie-scfg: Must include two entries.
+ The first entry must be a link to the SCFG device node
+ The second entry must be '0' or '1' based on physical PCIe controller index.
+ This is used to get SCFG PEXN registers
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+ of the data transferred from/to the IP block. This can avoid the software
+ cache flush/invalid actions, and improve the performance significantly.
+
+Example:
+
+ pcie@3400000 {
+ compatible = "fsl,ls1021a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+ fsl,pcie-scfg = <&scfg 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ };