diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/pci-keystone.txt | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt new file mode 100644 index 000000000..47202a293 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -0,0 +1,115 @@ +TI Keystone PCIe interface + +Keystone PCI host Controller is based on the Synopsys DesignWare PCI +hardware version 3.65. It shares common functions with the PCIe DesignWare +core driver and inherits common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt + +Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt +for the details of DesignWare DT bindings. Additional properties are +described here as well as properties that are not applicable. + +Required Properties:- + +compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC + Should be "ti,am654-pcie-rc" for RC on AM654x SoC +reg: Three register ranges as listed in the reg-names property +reg-names: "dbics" for the DesignWare PCIe registers, "app" for the + TI specific application registers, "config" for the + configuration space address + +pcie_msi_intc : Interrupt controller device node for MSI IRQ chip + interrupt-cells: should be set to 1 + interrupts: GIC interrupt lines connected to PCI MSI interrupt lines + (required if the compatible is "ti,keystone-pcie") +msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt + (required if the compatible is "ti,am654-pcie-rc". + +ti,syscon-pcie-id : phandle to the device control module required to set device + id and vendor id. +ti,syscon-pcie-mode : phandle to the device control module required to configure + PCI in either RC mode or EP mode. + + Example: + pcie_msi_intc: msi-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>; + }; + +pcie_intc: Interrupt controller device node for Legacy IRQ chip + interrupt-cells: should be set to 1 + + Example: + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + }; + +Optional properties:- + phys: phandle to generic Keystone SerDes PHY for PCI + phy-names: name of the generic Keystone SerDes PHY for PCI + - If boot loader already does PCI link establishment, then phys and + phy-names shouldn't be present. + interrupts: platform interrupt for error interrupts. + +DesignWare DT Properties not applicable for Keystone PCI + +1. pcie_bus clock-names not used. Instead, a phandle to phys is used. + +AM654 PCIe Endpoint +=================== + +Required Properties:- + +compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC +reg: Four register ranges as listed in the reg-names property +reg-names: "dbics" for the DesignWare PCIe registers, "app" for the + TI specific application registers, "atu" for the + Address Translation Unit configuration registers and + "addr_space" used to map remote RC address space +num-ib-windows: As specified in + Documentation/devicetree/bindings/pci/designware-pcie.txt +num-ob-windows: As specified in + Documentation/devicetree/bindings/pci/designware-pcie.txt +num-lanes: As specified in + Documentation/devicetree/bindings/pci/designware-pcie.txt +power-domains: As documented by the generic PM domain bindings in + Documentation/devicetree/bindings/power/power_domain.txt. +ti,syscon-pcie-mode: phandle to the device control module required to configure + PCI in either RC mode or EP mode. + +Optional properties:- + +phys: list of PHY specifiers (used by generic PHY framework) +phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of lanes as specified in *num-lanes* property. +("phys" and "phy-names" DT bindings are specified in +Documentation/devicetree/bindings/phy/phy-bindings.txt) +interrupts: platform interrupt for error interrupts. + +pcie-ep { + compatible = "ti,am654-pcie-ep"; + reg = <0x5500000 0x1000>, <0x5501000 0x1000>, + <0x10000000 0x8000000>, <0x5506000 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120>; + ti,syscon-pcie-mode = <&pcie0_mode>; + num-lanes = <1>; + num-ib-windows = <16>; + num-ob-windows = <16>; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; +}; |