summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/pci-keystone.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/pci-keystone.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/pci-keystone.txt115
1 files changed, 115 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
new file mode 100644
index 000000000..47202a293
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -0,0 +1,115 @@
+TI Keystone PCIe interface
+
+Keystone PCI host Controller is based on the Synopsys DesignWare PCI
+hardware version 3.65. It shares common functions with the PCIe DesignWare
+core driver and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pcie.txt
+
+Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
+for the details of DesignWare DT bindings. Additional properties are
+described here as well as properties that are not applicable.
+
+Required Properties:-
+
+compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
+ Should be "ti,am654-pcie-rc" for RC on AM654x SoC
+reg: Three register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "config" for the
+ configuration space address
+
+pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
+ interrupt-cells: should be set to 1
+ interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
+ (required if the compatible is "ti,keystone-pcie")
+msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
+ (required if the compatible is "ti,am654-pcie-rc".
+
+ti,syscon-pcie-id : phandle to the device control module required to set device
+ id and vendor id.
+ti,syscon-pcie-mode : phandle to the device control module required to configure
+ PCI in either RC mode or EP mode.
+
+ Example:
+ pcie_msi_intc: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+ };
+
+pcie_intc: Interrupt controller device node for Legacy IRQ chip
+ interrupt-cells: should be set to 1
+
+ Example:
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ };
+
+Optional properties:-
+ phys: phandle to generic Keystone SerDes PHY for PCI
+ phy-names: name of the generic Keystone SerDes PHY for PCI
+ - If boot loader already does PCI link establishment, then phys and
+ phy-names shouldn't be present.
+ interrupts: platform interrupt for error interrupts.
+
+DesignWare DT Properties not applicable for Keystone PCI
+
+1. pcie_bus clock-names not used. Instead, a phandle to phys is used.
+
+AM654 PCIe Endpoint
+===================
+
+Required Properties:-
+
+compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC
+reg: Four register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "atu" for the
+ Address Translation Unit configuration registers and
+ "addr_space" used to map remote RC address space
+num-ib-windows: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-ob-windows: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-lanes: As specified in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
+power-domains: As documented by the generic PM domain bindings in
+ Documentation/devicetree/bindings/power/power_domain.txt.
+ti,syscon-pcie-mode: phandle to the device control module required to configure
+ PCI in either RC mode or EP mode.
+
+Optional properties:-
+
+phys: list of PHY specifiers (used by generic PHY framework)
+phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of lanes as specified in *num-lanes* property.
+("phys" and "phy-names" DT bindings are specified in
+Documentation/devicetree/bindings/phy/phy-bindings.txt)
+interrupts: platform interrupt for error interrupts.
+
+pcie-ep {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x5500000 0x1000>, <0x5501000 0x1000>,
+ <0x10000000 0x8000000>, <0x5506000 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 120>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ num-lanes = <1>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+};