diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt new file mode 100644 index 000000000..aeba38f0a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -0,0 +1,84 @@ +Renesas AHB to PCI bridge +------------------------- + +This is the bridge used internally to connect the USB controllers to the +AHB. There is one bridge instance per USB port connected to the internal +OHCI and EHCI controllers. + +Required properties: +- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC; + "renesas,pci-r8a7743" for the R8A7743 SoC; + "renesas,pci-r8a7744" for the R8A7744 SoC; + "renesas,pci-r8a7745" for the R8A7745 SoC; + "renesas,pci-r8a7790" for the R8A7790 SoC; + "renesas,pci-r8a7791" for the R8A7791 SoC; + "renesas,pci-r8a7793" for the R8A7793 SoC; + "renesas,pci-r8a7794" for the R8A7794 SoC; + "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or + RZ/G1 compatible device. + + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + +- reg: A list of physical regions to access the device: the first is + the operational registers for the OHCI/EHCI controllers and the + second is for the bridge configuration and control registers. +- interrupts: interrupt for the device. +- clocks: The reference to the device clock. +- bus-range: The PCI bus number range; as this is a single bus, the range + should be specified as the same value twice. +- #address-cells: must be 3. +- #size-cells: must be 2. +- #interrupt-cells: must be 1. +- interrupt-map: standard property used to define the mapping of the PCI + interrupts to the GIC interrupts. +- interrupt-map-mask: standard property that helps to define the interrupt + mapping. + +Optional properties: +- dma-ranges: a single range for the inbound memory region. If not supplied, + defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the + allowed combinations of address and size. + +Example SoC configuration: + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0x0 0xee090000 0x0 0xc00>, + <0x0 0xee080000 0x0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + +Example board setup: + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; |