summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/ti-pci.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/ti-pci.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt102
1 files changed, 102 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
new file mode 100644
index 000000000..d5cbfe6b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -0,0 +1,102 @@
+TI PCI Controllers
+
+PCIe DesignWare Controller
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+ Should be "ti,dra7-pcie-ep" for EP (deprecated)
+ Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+ Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+ Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+ Should be "ti,dra726-pcie-ep" for dra72x in EP mode
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+ where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../designware-pcie.txt
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+ module and the register offset to specify lane
+ selection.
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI-specific registers
+ The second entry must be "rc-dbics" for the DesignWare PCIe
+ registers
+ The third entry must be "config" for the PCIe configuration space
+ - interrupts : Two interrupt entries must be specified. The first one is for
+ main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+ #size-cells,
+ #interrupt-cells,
+ device_type,
+ ranges,
+ interrupt-map-mask,
+ interrupt-map : as specified in ../designware-pcie.txt
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+ should contain the register offset within syscon
+ and the 2nd argument should contain the bit field
+ for setting the bit to enable unaligned
+ access.
+
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI-specific registers
+ "ep_dbics" for the standard configuration registers as
+ they are locally accessed within the DIF CS space
+ "ep_dbics2" for the standard configuration registers as
+ they are locally accessed within the DIF CS2 space
+ "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+ should contain the register offset within syscon
+ and the 2nd argument should contain the bit field
+ for setting the bit to enable unaligned
+ access.
+
+Optional Property:
+ - gpios : Should be added if a GPIO line is required to drive PERST# line
+
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
+
+Example:
+axi {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+};