summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/perf
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/perf')
-rw-r--r--Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt112
-rw-r--r--Documentation/devicetree/bindings/perf/arm,cmn.yaml57
-rw-r--r--Documentation/devicetree/bindings/perf/arm-ccn.txt23
-rw-r--r--Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml49
-rw-r--r--Documentation/devicetree/bindings/perf/nds32v3-pmu.txt17
5 files changed, 258 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
new file mode 100644
index 000000000..afb11cf69
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC PMU bindings
+
+This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
+The following PMU devices are supported:
+
+ L3C - L3 cache controller
+ IOB - IO bridge
+ MCB - Memory controller bridge
+ MC - Memory controller
+
+The following section describes the SoC PMU DT node binding.
+
+Required properties:
+- compatible : Shall be "apm,xgene-pmu" for revision 1 or
+ "apm,xgene-pmu-v2" for revision 2.
+- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
+- reg : First resource shall be the CPU bus PMU resource.
+- interrupts : Interrupt-specifier for PMU IRQ.
+
+Required properties for L3C subnode:
+- compatible : Shall be "apm,xgene-pmu-l3c".
+- reg : First resource shall be the L3C PMU resource.
+
+Required properties for IOB subnode:
+- compatible : Shall be "apm,xgene-pmu-iob".
+- reg : First resource shall be the IOB PMU resource.
+
+Required properties for MCB subnode:
+- compatible : Shall be "apm,xgene-pmu-mcb".
+- reg : First resource shall be the MCB PMU resource.
+- enable-bit-index : The bit indicates if the according MCB is enabled.
+
+Required properties for MC subnode:
+- compatible : Shall be "apm,xgene-pmu-mc".
+- reg : First resource shall be the MC PMU resource.
+- enable-bit-index : The bit indicates if the according MC is enabled.
+
+Example:
+ csw: csw@7e200000 {
+ compatible = "apm,xgene-csw", "syscon";
+ reg = <0x0 0x7e200000 0x0 0x1000>;
+ };
+
+ mcba: mcba@7e700000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e700000 0x0 0x1000>;
+ };
+
+ mcbb: mcbb@7e720000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e720000 0x0 0x1000>;
+ };
+
+ pmu: pmu@78810000 {
+ compatible = "apm,xgene-pmu-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ reg = <0x0 0x78810000 0x0 0x1000>;
+ interrupts = <0x0 0x22 0x4>;
+
+ pmul3c@7e610000 {
+ compatible = "apm,xgene-pmu-l3c";
+ reg = <0x0 0x7e610000 0x0 0x1000>;
+ };
+
+ pmuiob@7e940000 {
+ compatible = "apm,xgene-pmu-iob";
+ reg = <0x0 0x7e940000 0x0 0x1000>;
+ };
+
+ pmucmcb@7e710000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e710000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmcb@7e730000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e730000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e810000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e810000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmc@7e850000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e850000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e890000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e890000 0x0 0x1000>;
+ enable-bit-index = <2>;
+ };
+
+ pmucmc@7e8d0000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e8d0000 0x0 0x1000>;
+ enable-bit-index = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
new file mode 100644
index 000000000..e4fcc0de2
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,cmn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CMN (Coherent Mesh Network) Performance Monitors
+
+maintainers:
+ - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+ compatible:
+ const: arm,cmn-600
+
+ reg:
+ items:
+ - description: Physical address of the base (PERIPHBASE) and
+ size (up to 64MB) of the configuration address space.
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+ items:
+ - description: Overflow interrupt for DTC0
+ - description: Overflow interrupt for DTC1
+ - description: Overflow interrupt for DTC2
+ - description: Overflow interrupt for DTC3
+ description: One interrupt for each DTC domain implemented must
+ be specified, in order. DTC0 is always present.
+
+ arm,root-node:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset from PERIPHBASE of the configuration
+ discovery node (see TRM definition of ROOTNODEBASE).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - arm,root-node
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmu@50000000 {
+ compatible = "arm,cmn-600";
+ reg = <0x50000000 0x4000000>;
+ /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ arm,root-node = <0x104000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm-ccn.txt b/Documentation/devicetree/bindings/perf/arm-ccn.txt
new file mode 100644
index 000000000..1c53b5aa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm-ccn.txt
@@ -0,0 +1,23 @@
+* ARM CCN (Cache Coherent Network)
+
+Required properties:
+
+- compatible: (standard compatible string) should be one of:
+ "arm,ccn-502"
+ "arm,ccn-504"
+ "arm,ccn-508"
+ "arm,ccn-512"
+
+- reg: (standard registers property) physical address and size
+ (16MB) of the configuration registers block
+
+- interrupts: (standard interrupt property) single interrupt
+ generated by the control block
+
+Example:
+
+ ccn@2000000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x20 0x00000000 0 0x1000000>;
+ interrupts = <0 181 4>;
+ };
diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
new file mode 100644
index 000000000..5aad9f4e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale(NXP) IMX8 DDR performance monitor
+
+maintainers:
+ - Frank Li <frank.li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8-ddr-pmu
+ - fsl,imx8m-ddr-pmu
+ - fsl,imx8mp-ddr-pmu
+ - items:
+ - enum:
+ - fsl,imx8mm-ddr-pmu
+ - fsl,imx8mn-ddr-pmu
+ - fsl,imx8mq-ddr-pmu
+ - fsl,imx8mp-ddr-pmu
+ - const: fsl,imx8m-ddr-pmu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ddr-pmu@5c020000 {
+ compatible = "fsl,imx8-ddr-pmu";
+ reg = <0x5c020000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt
new file mode 100644
index 000000000..1bd15785b
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt
@@ -0,0 +1,17 @@
+* NDS32 Performance Monitor Units
+
+NDS32 core have a PMU for counting cpu and cache events like cache misses.
+The NDS32 PMU representation in the device tree should be done as under:
+
+Required properties:
+
+- compatible :
+ "andestech,nds32v3-pmu"
+
+- interrupts : The interrupt number for NDS32 PMU is 13.
+
+Example:
+pmu{
+ compatible = "andestech,nds32v3-pmu";
+ interrupts = <13>;
+}