summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml192
1 files changed, 192 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
new file mode 100644
index 000000000..a07dd1971
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the pinctrl portion of
+ the driver.
+
+ Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+ [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+ And these for relevant defines:
+ [3] include/dt-bindings/pinctrl/lochnagar.h
+
+ This binding must be part of the Lochnagar MFD binding:
+ [4] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number and the second cell is used
+ to specify optional parameters.
+ const: 2
+
+ gpio-ranges:
+ description:
+ Range of pins managed by the GPIO controller, see [1]. Both the
+ GPIO and Pinctrl base should be set to zero and the count to the
+ appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
+ maxItems: 1
+
+ pinctrl-0:
+ description:
+ A phandle to the default pinctrl state.
+
+ pinctrl-names:
+ description:
+ A pinctrl state named "default" must be defined.
+ const: default
+
+ pin-settings:
+ type: object
+ patternProperties:
+ '-pins$':
+ description:
+ The pin configurations are defined as a child of the pinctrl
+ states node, see [2]. Each sub-node can have the following
+ properties.
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ A list of groups to select (either this or "pins" must be
+ specified), available groups.
+ enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
+ dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
+ gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ pins:
+ description:
+ A list of pin names to select (either this or "groups" must
+ be specified), available pins.
+ enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
+ codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
+ codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
+ codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
+ codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
+ dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
+ dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
+ dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
+ psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+ psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
+ gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
+ gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
+ gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+ gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
+ gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
+ codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+ codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
+ codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
+ codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+ dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+ i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
+ dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
+ psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
+ dsp-gpio20, led1, led2 ]
+
+ function:
+ description:
+ The mux function to select, available functions.
+ enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
+ dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
+ spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
+ clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+ gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
+ codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+ spdif-mclk, codec-irq, codec-reset, dsp-reset,
+ dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
+ codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+ codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+ codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
+ codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
+ dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
+ i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
+ i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
+ psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
+ psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+ codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+ codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
+ codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
+ codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
+ codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+ dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
+ dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
+ dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
+ gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
+ gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
+ gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
+ gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
+ gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+ gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ output-enable:
+ description:
+ Specifies that an AIF group will be used as a master
+ interface (either this or input-enable is required if a
+ group is being muxed to an AIF)
+
+ input-enable:
+ description:
+ Specifies that an AIF group will be used as a slave
+ interface (either this or output-enable is required if a
+ group is being muxed to an AIF)
+
+ additionalProperties: false
+
+ required:
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - pinctrl-0
+ - pinctrl-names
+
+additionalProperties: false