summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml129
1 files changed, 129 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
new file mode 100644
index 000000000..4a43af0d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Pin Controller
+
+maintainers:
+ - Gareth Williams <gareth.williams.jx@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a06g032-pinctrl # RZ/N1D
+ - renesas,r9a06g033-pinctrl # RZ/N1S
+ - const: renesas,rzn1-pinctrl # Generic RZ/N1
+
+ reg:
+ items:
+ - description: GPIO Multiplexing Level1 Register Block
+ - description: GPIO Multiplexing Level2 Register Block
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: bus
+ description:
+ The bus clock, sometimes described as pclk, for register accesses.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ A pin multiplexing sub-node describes how to configure a set of (or a
+ single) pin in some desired alternate function mode.
+ A single sub-node may define several pin configurations.
+
+ properties:
+ pinmux:
+ description: |
+ Integer array representing pin number and pin multiplexing
+ configuration.
+ When a pin has to be configured in alternate function mode, use
+ this property to identify the pin by its global index, and provide
+ its alternate function configuration number along with it.
+ When multiple pins are required to be configured as part of the
+ same alternate function they shall be specified as members of the
+ same argument list of a single "pinmux" property.
+ Integers values in the "pinmux" argument list are assembled as:
+ (PIN | MUX_FUNC << 8)
+ where PIN directly corresponds to the pl_gpio pin number and
+ MUX_FUNC is one of the alternate function identifiers defined in:
+ <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+ These identifiers collapse the IO Multiplex Configuration Level 1
+ and Level 2 numbers that are detailed in the hardware reference
+ manual into a single number. The identifiers for Level 2 are simply
+ offset by 10. Additional identifiers are provided to specify the
+ MDIO source peripheral.
+
+ phandle: true
+ bias-disable: true
+ bias-pull-up:
+ description: Pull up the pin with 50 kOhm
+ bias-pull-down:
+ description: Pull down the pin with 50 kOhm
+ bias-high-impedance: true
+ drive-strength:
+ enum: [ 4, 6, 8, 12 ]
+
+ required:
+ - pinmux
+
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+ - type: object
+ properties:
+ phandle: true
+
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+ #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+ pinctrl: pinctrl@40067000 {
+ compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+ reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+ clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+ clock-names = "bus";
+
+ /*
+ * A serial communication interface with a TX output pin and an RX
+ * input pin.
+ */
+ pins_uart0: pins_uart0 {
+ pinmux = <
+ RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+ RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+ >;
+ };
+
+ /*
+ * Set the pull-up on the RXD pin of the UART.
+ */
+ pins_uart0_alt: pins_uart0_alt {
+ pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
+
+ pins_uart6_rx {
+ pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
+ bias-pull-up;
+ };
+ };
+ };