summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power/supply/bq25980.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply/bq25980.yaml')
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq25980.yaml114
1 files changed, 114 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
new file mode 100644
index 000000000..f6b3dd409
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+ - Dan Murphy <dmurphy@ti.com>
+ - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+
+description: |
+ The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+ for use in high-power density portable electronics. These inductorless
+ switching chargers can provide over 97% efficiency by making use of the
+ switched capacitor architecture.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25980
+ - ti,bq25975
+ - ti,bq25960
+
+ reg:
+ maxItems: 1
+
+ ti,watchdog-timeout-ms:
+ description: |
+ Watchdog timer in milli seconds. 0 disables the watchdog.
+ default: 0
+ minimum: 0
+ maximum: 300000
+ enum: [ 0, 5000, 10000, 50000, 300000]
+
+ ti,sc-ovp-limit-microvolt:
+ description: |
+ Minimum input voltage limit in micro volts with a when the charger is in
+ switch cap mode. 100000 micro volt step.
+ default: 17800000
+ minimum: 14000000
+ maximum: 22000000
+
+ ti,sc-ocp-limit-microamp:
+ description: |
+ Maximum input current limit in micro amps with a 100000 micro amp step.
+ minimum: 100000
+ maximum: 3300000
+
+ ti,bypass-ovp-limit-microvolt:
+ description: |
+ Minimum input voltage limit in micro volts with a when the charger is in
+ switch cap mode. 50000 micro volt step.
+ minimum: 7000000
+ maximum: 12750000
+
+ ti,bypass-ocp-limit-microamp:
+ description: |
+ Maximum input current limit in micro amps with a 100000 micro amp step.
+ minimum: 100000
+ maximum: 3300000
+
+ ti,bypass-enable:
+ type: boolean
+ description: Enables bypass mode at boot time
+
+ interrupts:
+ description: |
+ Indicates that the device state has changed.
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <4000000>;
+ constant-charge-voltage-max-microvolt = <8400000>;
+ precharge-current-microamp = <160000>;
+ charge-term-current-microamp = <160000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25980: charger@65 {
+ compatible = "ti,bq25980";
+ reg = <0x65>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,watchdog-timer = <0>;
+ ti,sc-ocp-limit-microamp = <2000000>;
+ ti,sc-ovp-limit-microvolt = <17800000>;
+ monitored-battery = <&bat>;
+ };
+ };
+
+...