summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc')
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/akebono.txt52
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/cpm.txt52
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/hsta.txt18
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt91
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/reboot.txt18
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt20
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/ccf.txt46
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/cpus.txt33
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt388
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/diu.txt32
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/dma.txt204
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/ecm.txt60
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt309
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt61
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/lbc.txt43
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mcm.txt60
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt17
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt78
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt21
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt198
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt63
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt38
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpic.txt231
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt111
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/pamu.txt148
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/pmc.txt63
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/raideng.txt81
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/scfg.txt18
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt163
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/srio.txt104
-rw-r--r--Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt248
-rw-r--r--Documentation/devicetree/bindings/powerpc/ibm,vas.txt22
-rw-r--r--Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt109
-rw-r--r--Documentation/devicetree/bindings/powerpc/nintendo/wii.txt176
-rw-r--r--Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt14
-rw-r--r--Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt118
-rw-r--r--Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt27
-rw-r--r--Documentation/devicetree/bindings/powerpc/sleep.yaml47
38 files changed, 3582 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
new file mode 100644
index 000000000..940fd78e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
@@ -0,0 +1,52 @@
+
+IBM Akebono board device tree
+=============================
+
+The IBM Akebono board is a development board for the PPC476GTR SoC.
+
+0) The root node
+
+ Required properties:
+
+ - model : "ibm,akebono".
+ - compatible : "ibm,akebono" , "ibm,476gtr".
+
+1.a) The Secure Digital Host Controller Interface (SDHCI) node
+
+ Represent the Secure Digital Host Controller Interfaces.
+
+ Required properties:
+
+ - compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
+ - reg : should contain the SDHCI registers location and length.
+ - interrupts : should contain the SDHCI interrupt.
+
+1.b) The Advanced Host Controller Interface (AHCI) SATA node
+
+ Represents the advanced host controller SATA interface.
+
+ Required properties:
+
+ - compatible : should be "ibm,476gtr-ahci".
+ - reg : should contain the AHCI registers location and length.
+ - interrupts : should contain the AHCI interrupt.
+
+1.c) The FPGA node
+
+ The Akebono board stores some board information such as the revision
+ number in an FPGA which is represented by this node.
+
+ Required properties:
+
+ - compatible : should be "ibm,akebono-fpga".
+ - reg : should contain the FPGA registers location and length.
+
+1.d) The AVR node
+
+ The Akebono board has an Atmel AVR microprocessor attached to the I2C
+ bus as a power controller for the board.
+
+ Required properties:
+
+ - compatible : should be "ibm,akebono-avr".
+ - reg : should contain the I2C bus address for the AVR.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt b/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt
new file mode 100644
index 000000000..ee459806d
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt
@@ -0,0 +1,52 @@
+PPC4xx Clock Power Management (CPM) node
+
+Required properties:
+ - compatible : compatible list, currently only "ibm,cpm"
+ - dcr-access-method : "native"
+ - dcr-reg : < DCR register range >
+
+Optional properties:
+ - er-offset : All 4xx SoCs with a CPM controller have
+ one of two different order for the CPM
+ registers. Some have the CPM registers
+ in the following order (ER,FR,SR). The
+ others have them in the following order
+ (SR,ER,FR). For the second case set
+ er-offset = <1>.
+ - unused-units : specifier consist of one cell. For each
+ bit in the cell, the corresponding bit
+ in CPM will be set to turn off unused
+ devices.
+ - idle-doze : specifier consist of one cell. For each
+ bit in the cell, the corresponding bit
+ in CPM will be set to turn off unused
+ devices. This is usually just CPM[CPU].
+ - standby : specifier consist of one cell. For each
+ bit in the cell, the corresponding bit
+ in CPM will be set on standby and
+ restored on resume.
+ - suspend : specifier consist of one cell. For each
+ bit in the cell, the corresponding bit
+ in CPM will be set on suspend (mem) and
+ restored on resume. Note, for standby
+ and suspend the corresponding bits can
+ be different or the same. Usually for
+ standby only class 2 and 3 units are set.
+ However, the interface does not care.
+ If they are the same, the additional
+ power saving will be seeing if support
+ is available to put the DDR in self
+ refresh mode and any additional power
+ saving techniques for the specific SoC.
+
+Example:
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x160 0x003>;
+ er-offset = <0>;
+ unused-units = <0x00000100>;
+ idle-doze = <0x02000000>;
+ standby = <0xfeff0000>;
+ suspend = <0xfeff791d>;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
new file mode 100644
index 000000000..66dbd9ff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
@@ -0,0 +1,18 @@
+
+ppc476gtr High Speed Serial Assist (HSTA) node
+==============================================
+
+The 476gtr SoC contains a high speed serial assist module attached
+between the plb4 and plb6 system buses to provide high speed data
+transfer between memory and system peripherals as well as support for
+PCI message signalled interrupts.
+
+Currently only the MSI support is used by Linux using the following
+device tree entries:
+
+Require properties:
+- compatible : "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
+- reg : register mapping for the HSTA MSI space
+- interrupts : ordered interrupt mapping for each MSI in the register
+ space. The first interrupt should be associated with a
+ register offset of 0x00, the second to 0x10, etc.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
new file mode 100644
index 000000000..de6a5f7d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
@@ -0,0 +1,91 @@
+PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
+
+Device nodes needed for operation of the ppc440spe-adma driver
+are specified hereby. These are I2O/DMA, DMA and XOR nodes
+for DMA engines and Memory Queue Module node. The latter is used
+by ADMA driver for configuration of RAID-6 H/W capabilities of
+the PPC440SPe. In addition to the nodes and properties described
+below, the ranges property of PLB node must specify ranges for
+DMA devices.
+
+ i) The I2O node
+
+ Required properties:
+
+ - compatible : "ibm,i2o-440spe";
+ - reg : <registers mapping>
+ - dcr-reg : <DCR registers range>
+
+ Example:
+
+ I2O: i2o@400100000 {
+ compatible = "ibm,i2o-440spe";
+ reg = <0x00000004 0x00100000 0x100>;
+ dcr-reg = <0x060 0x020>;
+ };
+
+
+ ii) The DMA node
+
+ Required properties:
+
+ - compatible : "ibm,dma-440spe";
+ - cell-index : 1 cell, hardware index of the DMA engine
+ (typically 0x0 and 0x1 for DMA0 and DMA1)
+ - reg : <registers mapping>
+ - dcr-reg : <DCR registers range>
+ - interrupts : <interrupt mapping for DMA0/1 interrupts sources:
+ 2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
+ and DMA Error IRQ (on UIC1). The latter is common
+ for both DMA engines>.
+
+ Example:
+
+ DMA0: dma0@400100100 {
+ compatible = "ibm,dma-440spe";
+ cell-index = <0>;
+ reg = <0x00000004 0x00100100 0x100>;
+ dcr-reg = <0x060 0x020>;
+ interrupt-parent = <&DMA0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <
+ 0 &UIC0 0x14 4
+ 1 &UIC1 0x16 4>;
+ };
+
+
+ iii) XOR Accelerator node
+
+ Required properties:
+
+ - compatible : "amcc,xor-accelerator";
+ - reg : <registers mapping>
+ - interrupts : <interrupt mapping for XOR interrupt source>
+
+ Example:
+
+ xor-accel@400200000 {
+ compatible = "amcc,xor-accelerator";
+ reg = <0x00000004 0x00200000 0x400>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1f 4>;
+ };
+
+
+ iv) Memory Queue Module node
+
+ Required properties:
+
+ - compatible : "ibm,mq-440spe";
+ - dcr-reg : <DCR registers range>
+
+ Example:
+
+ MQ0: mq {
+ compatible = "ibm,mq-440spe";
+ dcr-reg = <0x040 0x020>;
+ };
+
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
new file mode 100644
index 000000000..5bc635513
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
@@ -0,0 +1,18 @@
+Reboot property to control system reboot on PPC4xx systems:
+
+By setting "reset_type" to one of the following values, the default
+software reset mechanism may be overridden. Here the possible values of
+"reset_type":
+
+ 1 - PPC4xx core reset
+ 2 - PPC4xx chip reset
+ 3 - PPC4xx system reset (default)
+
+Example:
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440SPe";
+ ...
+ reset-type = <2>; /* Use chip-reset */
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
new file mode 100644
index 000000000..781955f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
@@ -0,0 +1,20 @@
+* Freescale PQ3 and QorIQ based Cache SRAM
+
+Freescale's mpc85xx and some QorIQ platforms provide an
+option of configuring a part of (or full) cache memory
+as SRAM. This cache SRAM representation in the device
+tree should be done as under:-
+
+Required properties:
+
+- compatible : should be "fsl,p2020-cache-sram"
+- fsl,cache-sram-ctlr-handle : points to the L2 controller
+- reg : offset and length of the cache-sram.
+
+Example:
+
+cache-sram@fff00000 {
+ fsl,cache-sram-ctlr-handle = <&L2>;
+ reg = <0 0xfff00000 0 0x10000>;
+ compatible = "fsl,p2020-cache-sram";
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
new file mode 100644
index 000000000..454da7e08
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
@@ -0,0 +1,46 @@
+Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding
+
+DESCRIPTION
+
+The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure
+that enables the implementation of coherent, multicore systems.
+
+Required properties:
+
+- compatible: <string list>
+ fsl,corenet1-cf - CoreNet coherency fabric version 1.
+ Example chips: T4240, B4860
+
+ fsl,corenet2-cf - CoreNet coherency fabric version 2.
+ Example chips: P5040, P5020, P4080, P3041, P2041
+
+ fsl,corenet-cf - Used to represent the common registers
+ between CCF version 1 and CCF version 2. This compatible
+ is retained for compatibility reasons, as it was already
+ used for both CCF version 1 chips and CCF version 2
+ chips. It should be specified after either
+ "fsl,corenet1-cf" or "fsl,corenet2-cf".
+
+- reg: <prop-encoded-array>
+ A standard property. Represents the CCF registers.
+
+- interrupts: <prop-encoded-array>
+ Interrupt mapping for CCF error interrupt.
+
+- fsl,ccf-num-csdids: <u32>
+ Specifies the number of Coherency Subdomain ID Port Mapping
+ Registers that are supported by the CCF.
+
+- fsl,ccf-num-snoopids: <u32>
+ Specifies the number of Snoop ID Port Mapping Registers that
+ are supported by CCF.
+
+Example:
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
new file mode 100644
index 000000000..d63ab1dec
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -0,0 +1,33 @@
+===================================================================
+Power Architecture CPU Binding
+Copyright 2013 Freescale Semiconductor Inc.
+
+Power Architecture CPUs in Freescale SOCs are represented in device trees as
+per the definition in the Devicetree Specification.
+
+In addition to the the Devicetree Specification definitions, the properties
+defined below may be present on CPU nodes.
+
+PROPERTIES
+
+ - fsl,eref-*
+ Usage: optional
+ Value type: <empty>
+ Definition: The EREF (EREF: A Programmer.s Reference Manual for
+ Freescale Power Architecture) defines the architecture for Freescale
+ Power CPUs. The EREF defines some architecture categories not defined
+ by the Power ISA. For these EREF-specific categories, the existence of
+ a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
+ name with all uppercase letters converted to lowercase, indicates that
+ the category is supported by the implementation.
+
+ - fsl,portid-mapping
+ Usage: optional
+ Value type: <u32>
+ Definition: The Coherency Subdomain ID Port Mapping Registers and
+ Snoop ID Port Mapping registers, which are part of the CoreNet
+ Coherency fabric (CCF), provide a CoreNet Coherency Subdomain
+ ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from
+ these registers should be set if the coresponding CPU should be
+ snooped. This property defines a bitmask which selects the bit
+ that should be set if this cpu should be snooped.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
new file mode 100644
index 000000000..4b01e1afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -0,0 +1,388 @@
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change. Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr" and "simple-bus".
+ The DCSR space exists in the memory-mapped bus.
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ or representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ or representing the size of physical addresses in
+ child nodes.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the DCSR space.
+
+EXAMPLE
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-epu"
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by the EPU.
+ The value of the interrupts property consists of three
+ interrupt specifiers. The format of the specifier is defined
+ by the binding document describing the node's interrupt parent.
+
+ The EPU counters can be configured to assert the performance
+ monitor interrupt signal based on either counter overflow or value
+ match. Which counter asserted the interrupt is captured in an EPU
+ Counter Interrupt Status Register (EPCPUISR).
+
+ The EPU unit can also be configured to assert either or both of
+ two interrupt signals based on debug event sources within the SoC.
+ The interrupt signals are epu_xt_int0 and epu_xt_int1.
+ Which event source asserted the interrupt is captured in an EPU
+ Interrupt Status Register (EPISR0,EPISR1).
+
+ Interrupt numbers are listed in order (perfmon, event0, event1).
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-npc"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+ The Nexus Port controller occupies two regions in the DCSR space
+ with distinct functionality.
+
+ The first register range describes the Nexus Port Controller
+ control and status registers.
+
+ The second register range describes the Nexus Port Controller
+ internal trace buffer. The NPC trace buffer is a small memory buffer
+ which stages the nexus trace data for transmission via the Aurora port
+ or to a DDR based trace buffer. In some configurations the NPC trace
+ buffer can be the only trace buffer used.
+
+
+EXAMPLE
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-nxc"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-corenet"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+ The CoreNet Debug controller occupies two regions in the DCSR space
+ with distinct functionality.
+
+ The first register range describes the CoreNet Debug Controller
+ functionalty to perform transaction and transaction attribute matches.
+
+ The second register range describes the CoreNet Debug Controller
+ functionalty to trigger event notifications and debug traces.
+
+EXAMPLE
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+ generic compatible string "fsl,dcsr-dpaa".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+ generic compatible string "fsl,dcsr-ocn".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-ddr"
+
+ - dev-handle
+ Usage: required
+ Definition: A phandle to associate this debug node with its
+ component controller.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+ generic compatible string "fsl,dcsr-nal".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+ generic compatible string "fsl,dcsr-rcpm".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the cpu
+ of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+ generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+ - cpu-handle
+ Usage: required
+ Definition: A phandle to associate this debug node with its cpu.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy",
+ "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy",
+ "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+
+=======================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
new file mode 100644
index 000000000..eb45db1ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
@@ -0,0 +1,32 @@
+* Freescale Display Interface Unit
+
+The Freescale DIU is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
+- reg : should contain at least address and length of the DIU register
+ set.
+- interrupts : one DIU interrupt should be described here.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+ Data from the detailed timing descriptor will be used to
+ program the display controller.
+
+Example (MPC8610HPCD):
+ display@2c000 {
+ compatible = "fsl,diu";
+ reg = <0x2c000 100>;
+ interrupts = <72 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+Example for MPC5121:
+ display@2100 {
+ compatible = "fsl,mpc5121-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ interrupt-parent = <&ipic>;
+ edid = [edid-data];
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
new file mode 100644
index 000000000..c11ad5c6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -0,0 +1,204 @@
+* Freescale DMA Controllers
+
+** Freescale Elo DMA Controller
+ This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+ series chips such as mpc8315, mpc8349, mpc8379 etc.
+
+Required properties:
+
+- compatible : must include "fsl,elo-dma"
+- reg : DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+- cell-index : controller index. 0 for controller @ 0x8100
+- interrupts : interrupt specifier for DMA IRQ
+
+- DMA channel nodes:
+ - compatible : must include "fsl,elo-dma-channel"
+ However, see note below.
+ - reg : DMA channel specific registers
+ - cell-index : DMA channel index starts at 0.
+
+Optional properties:
+ - interrupts : interrupt specifier for DMA channel IRQ
+ (on 83xx this is expected to be identical to
+ the interrupts property of the parent node)
+
+Example:
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a4>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <0>;
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <1>;
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <2>;
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <3>;
+ reg = <0x180 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
+** Freescale EloPlus DMA Controller
+ This is a 4-channel DMA controller with extended addresses and chaining,
+ mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+ mpc8540, mpc8641 p4080, bsc9131 etc.
+
+Required properties:
+
+- compatible : must include "fsl,eloplus-dma"
+- reg : DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
+- cell-index : controller index. 0 for controller @ 0x21000,
+ 1 for controller @ 0xc000
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+ - compatible : must include "fsl,eloplus-dma-channel"
+ However, see note below.
+ - cell-index : DMA channel index starts at 0.
+ - reg : DMA channel specific registers
+ - interrupts : interrupt specifier for DMA channel IRQ
+
+Example:
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 4>;
+ ranges = <0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+** Freescale Elo3 DMA Controller
+ DMA controller which has same function as EloPlus except that Elo3 has 8
+ channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+ series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible : must include "fsl,elo3-dma"
+- reg : contains two entries for DMA General Status Registers,
+ i.e. DGSR0 which includes status for channel 1~4, and
+ DGSR1 for channel 5~8
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+ - compatible : must include "fsl,eloplus-dma-channel"
+ - reg : DMA channel specific registers
+ - interrupts : interrupt specifier for DMA channel IRQ
+
+Example:
+dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x100300 0x4>,
+ <0x100600 0x4>;
+ ranges = <0x0 0x100100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <31 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <79 2 0 0>;
+ };
+};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
+for more information.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
new file mode 100644
index 000000000..76dc547bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
@@ -0,0 +1,60 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured. For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,ecm-law"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - fsl,num-laws
+ Usage: required
+ Value type: <u32>
+ Definition: The value specifies the number of local access
+ windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+ CHIP is the processor (mpc8572, mpc8544, etc.)
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
new file mode 100644
index 000000000..ed6a414b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
@@ -0,0 +1,309 @@
+===============================================================================
+Freescale Interlaken Look-Aside Controller Device Bindings
+Copyright 2012 Freescale Semiconductor Inc.
+
+CONTENTS
+ - Interlaken Look-Aside Controller (LAC) Node
+ - Example LAC Node
+ - Interlaken Look-Aside Controller (LAC) Software Portal Node
+ - Interlaken Look-Aside Controller (LAC) Software Portal Child Nodes
+ - Example LAC SWP Node with Child Nodes
+
+==============================================================================
+Interlaken Look-Aside Controller (LAC) Node
+
+DESCRIPTION
+
+The Interlaken is a narrow, high speed channelized chip-to-chip interface. To
+facilitate interoperability between a data path device and a look-aside
+co-processor, the Interlaken Look-Aside protocol is defined for short
+transaction-related transfers. Although based on the Interlaken protocol,
+Interlaken Look-Aside is not directly compatible with Interlaken and can be
+considered a different operation mode.
+
+The Interlaken LA controller connects internal platform to Interlaken serial
+interface. It accepts LA command through software portals, which are system
+memory mapped 4KB spaces. The LA commands are then translated into the
+Interlaken control words and data words, which are sent on TX side to TCAM
+through SerDes lanes.
+
+There are two 4KiB spaces defined within the LAC global register memory map.
+There is a full register set at 0x0000-0x0FFF (also known as the "hypervisor"
+version), and a subset at 0x1000-0x1FFF. The former is a superset of the
+latter, and includes certain registers that should not be accessible to
+partitioned software. Separate nodes are used for each region, with a phandle
+linking the hypervisor node to the normal operating node.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,interlaken-lac". This represents only
+ those LAC CCSR registers not protected in partitioned
+ software. The version of the device is determined by the LAC
+ IP Block Revision Register (IPBRR0) at offset 0x0BF8.
+
+ Table of correspondences between IPBRR0 values and example
+ chips:
+ Value Device
+ ----------- -------
+ 0x02000100 T4240
+
+ The Hypervisor node has a different compatible. It must include
+ "fsl,interlaken-lac-hv". This node represents the protected
+ LAC register space and is required except inside a partition
+ where access to the hypervisor node is to be denied.
+
+ - fsl,non-hv-node
+ Usage: required in "fsl,interlaken-lac-hv"
+ Value type: <phandle>
+ Definition: Points to the non-protected LAC CCSR mapped register space
+ node.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The first resource represents the
+ Interlaken LAC configuration registers.
+
+ - interrupts:
+ Usage: required in non-hv node only
+ Value type: <prop-encoded-array>
+ Definition: Interrupt mapping for Interlaken LAC error IRQ.
+
+EXAMPLE
+ lac: lac@229000 {
+ compatible = "fsl,interlaken-lac"
+ reg = <0x229000 0x1000>;
+ interrupts = <16 2 1 18>;
+ };
+
+ lac-hv@228000 {
+ compatible = "fsl,interlaken-lac-hv"
+ reg = <0x228000 0x1000>;
+ fsl,non-hv-node = <&lac>;
+ };
+
+===============================================================================
+Interlaken Look-Aside Controller (LAC) Software Portal Container Node
+
+DESCRIPTION
+The Interlaken Look-Aside Controller (LAC) utilizes Software Portals to accept
+Interlaken Look-Aside (ILA) commands. The Interlaken LAC software portal
+memory map occupies 128KB of memory space. The software portal memory space is
+intended to be cache-enabled. WIMG for each software space is required to be
+0010 if stashing is enabled; otherwise, WIMG can be 0000 or 0010.
+
+PROPERTIES
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Must have a value of 1.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Must have a value of 1.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,interlaken-lac-portals"
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the address and length
+ of the LAC portal memory space.
+
+===============================================================================
+Interlaken Look-Aside Controller (LAC) Software Portals Child Nodes
+
+DESCRIPTION
+There are up to 24 available software portals with each software portal
+requiring 4KB of consecutive memory within the software portal memory mapped
+space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,interlaken-lac-portal-vX.Y" where X is
+ the Major version (IP_MJ) found in the LAC IP Block Revision
+ Register (IPBRR0), at offset 0x0BF8, and Y is the Minor version
+ (IP_MN).
+
+ Table of correspondences between version values and example chips:
+ Value Device
+ ------ -------
+ 1.0 T4240
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The first resource represents the
+ Interlaken LAC software portal registers.
+
+ - fsl,liodn
+ Value type: <u32>
+ Definition: The logical I/O device number (LIODN) for this device. The
+ LIODN is a number expressed by this device and used to perform
+ look-ups in the IOMMU (PAMU) address table when performing
+ DMAs. This property is automatically added by u-boot.
+
+===============================================================================
+EXAMPLE
+
+lac-portals {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "fsl,interlaken-lac-portals";
+ ranges = <0x0 0xf 0xf4400000 0x20000>;
+
+ lportal0: lac-portal@0 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x204>;
+ reg = <0x0 0x1000>;
+ };
+
+ lportal1: lac-portal@1000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x205>;
+ reg = <0x1000 0x1000>;
+ };
+
+ lportal2: lac-portal@2000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x206>;
+ reg = <0x2000 0x1000>;
+ };
+
+ lportal3: lac-portal@3000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x207>;
+ reg = <0x3000 0x1000>;
+ };
+
+ lportal4: lac-portal@4000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x208>;
+ reg = <0x4000 0x1000>;
+ };
+
+ lportal5: lac-portal@5000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x209>;
+ reg = <0x5000 0x1000>;
+ };
+
+ lportal6: lac-portal@6000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x20A>;
+ reg = <0x6000 0x1000>;
+ };
+
+ lportal7: lac-portal@7000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x20B>;
+ reg = <0x7000 0x1000>;
+ };
+
+ lportal8: lac-portal@8000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x20C>;
+ reg = <0x8000 0x1000>;
+ };
+
+ lportal9: lac-portal@9000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x20D>;
+ reg = <0x9000 0x1000>;
+ };
+
+ lportal10: lac-portal@a000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x20E>;
+ reg = <0xA000 0x1000>;
+ };
+
+ lportal11: lac-portal@b000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x20F>;
+ reg = <0xB000 0x1000>;
+ };
+
+ lportal12: lac-portal@c000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x210>;
+ reg = <0xC000 0x1000>;
+ };
+
+ lportal13: lac-portal@d000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x211>;
+ reg = <0xD000 0x1000>;
+ };
+
+ lportal14: lac-portal@e000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x212>;
+ reg = <0xE000 0x1000>;
+ };
+
+ lportal15: lac-portal@f000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x213>;
+ reg = <0xF000 0x1000>;
+ };
+
+ lportal16: lac-portal@10000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x214>;
+ reg = <0x10000 0x1000>;
+ };
+
+ lportal17: lac-portal@11000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x215>;
+ reg = <0x11000 0x1000>;
+ };
+
+ lportal8: lac-portal@1200 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x216>;
+ reg = <0x12000 0x1000>;
+ };
+
+ lportal19: lac-portal@13000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x217>;
+ reg = <0x13000 0x1000>;
+ };
+
+ lportal20: lac-portal@14000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x218>;
+ reg = <0x14000 0x1000>;
+ };
+
+ lportal21: lac-portal@15000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x219>;
+ reg = <0x15000 0x1000>;
+ };
+
+ lportal22: lac-portal@16000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x21A>;
+ reg = <0x16000 0x1000>;
+ };
+
+ lportal23: lac-portal@17000 {
+ compatible = "fsl,interlaken-lac-portal-v1.0";
+ fsl,liodn = <0x21B>;
+ reg = <0x17000 0x1000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
new file mode 100644
index 000000000..8a7069639
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
@@ -0,0 +1,61 @@
+Freescale L2 Cache Controller
+
+L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
+The cache bindings explained below are Devicetree Specification compliant
+
+Required Properties:
+
+- compatible : Should include one of the following:
+ "fsl,8540-l2-cache-controller"
+ "fsl,8541-l2-cache-controller"
+ "fsl,8544-l2-cache-controller"
+ "fsl,8548-l2-cache-controller"
+ "fsl,8555-l2-cache-controller"
+ "fsl,8568-l2-cache-controller"
+ "fsl,b4420-l2-cache-controller"
+ "fsl,b4860-l2-cache-controller"
+ "fsl,bsc9131-l2-cache-controller"
+ "fsl,bsc9132-l2-cache-controller"
+ "fsl,c293-l2-cache-controller"
+ "fsl,mpc8536-l2-cache-controller"
+ "fsl,mpc8540-l2-cache-controller"
+ "fsl,mpc8541-l2-cache-controller"
+ "fsl,mpc8544-l2-cache-controller"
+ "fsl,mpc8548-l2-cache-controller"
+ "fsl,mpc8555-l2-cache-controller"
+ "fsl,mpc8560-l2-cache-controller"
+ "fsl,mpc8568-l2-cache-controller"
+ "fsl,mpc8569-l2-cache-controller"
+ "fsl,mpc8572-l2-cache-controller"
+ "fsl,p1010-l2-cache-controller"
+ "fsl,p1011-l2-cache-controller"
+ "fsl,p1012-l2-cache-controller"
+ "fsl,p1013-l2-cache-controller"
+ "fsl,p1014-l2-cache-controller"
+ "fsl,p1015-l2-cache-controller"
+ "fsl,p1016-l2-cache-controller"
+ "fsl,p1020-l2-cache-controller"
+ "fsl,p1021-l2-cache-controller"
+ "fsl,p1022-l2-cache-controller"
+ "fsl,p1023-l2-cache-controller"
+ "fsl,p1024-l2-cache-controller"
+ "fsl,p1025-l2-cache-controller"
+ "fsl,p2010-l2-cache-controller"
+ "fsl,p2020-l2-cache-controller"
+ "fsl,t2080-l2-cache-controller"
+ "fsl,t4240-l2-cache-controller"
+ and "cache".
+- reg : Address and size of L2 cache controller registers
+- cache-size : Size of the entire L2 cache
+- interrupts : Error interrupt of L2 controller
+- cache-line-size : Size of L2 cache lines
+
+Example:
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,bsc9132-l2-cache-controller", "cache";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 1 0>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
new file mode 100644
index 000000000..1c80fcede
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
@@ -0,0 +1,43 @@
+* Chipselect/Local Bus
+
+Properties:
+- name : Should be localbus
+- #address-cells : Should be either two or three. The first cell is the
+ chipselect number, and the remaining cells are the
+ offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+ can be.
+- ranges : Each range corresponds to a single chipselect, and cover
+ the entire access window as configured.
+
+Example:
+ localbus@f0010100 {
+ compatible = "fsl,mpc8272-localbus",
+ "fsl,pq2-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xf0010100 0x40>;
+
+ ranges = <0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0xf4500000 0x00008000
+ 0x2 0x0 0xfd810000 0x00010000>;
+
+ flash@0,0 {
+ compatible = "jedec-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ };
+
+ board-control@1,0 {
+ reg = <0x1 0x0 0x20>;
+ compatible = "fsl,mpc8272ads-bcsr";
+ };
+
+ simple-periph@2,0 {
+ compatible = "fsl,elbc-gpcm-uio";
+ reg = <0x2 0x0 0x10000>;
+ elbc-gpcm-br = <0xfd810800>;
+ elbc-gpcm-or = <0xffff09f7>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
new file mode 100644
index 000000000..a5dae6b1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
@@ -0,0 +1,60 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured. For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,mcm-law"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - fsl,num-laws
+ Usage: required
+ Value type: <u32>
+ Definition: The value specifies the number of local access
+ windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+ CHIP is the processor (mpc8641, mpc8610, etc.)
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
new file mode 100644
index 000000000..37f91fa57
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
@@ -0,0 +1,17 @@
+Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
+
+Required properties:
+- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
+- reg : should specify I2C address (0x0a).
+- #gpio-cells : should be 2.
+- gpio-controller : should be present.
+
+Example:
+
+mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8349emitx",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
new file mode 100644
index 000000000..5dfd68f1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -0,0 +1,78 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is required there:
+
+fsl,mpc512x-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+ Supported <soc>s: mpc5121, mpc5125
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+ PSC FIFO Controller and b is a field that represents an
+ encoding of the sense and level information for the interrupt.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+PSC in SPI mode
+---------------
+
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+ Supported <soc>s: mpc5121, mpc5125
+ - reg : Offset and length of the register set for the PSC
+ FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+ PSC FIFO Controller and b is a field that represents an
+ encoding of the sense and level information for the interrupt.
+
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ cell-index = <0>;
+ reg = <0x11000 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ cell-index = <1>;
+ reg = <0x11100 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
new file mode 100644
index 000000000..b3b392fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
@@ -0,0 +1,21 @@
+Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual)
+
+Required properties:
+- compatible: should be "fsl,mpc512x-lpbfifo";
+- reg: should contain the offset and length of SCLPC register set;
+- interrupts: should contain the interrupt specifier for SCLPC; syntax of an
+ interrupt client node is described in interrupt-controller/interrupts.txt;
+- dmas: should contain the DMA specifier for SCLPC as described at
+ dma/dma.txt and dma/mpc512x-dma.txt;
+- dma-names: should be "rx-tx";
+
+Example:
+
+ sclpc@10100 {
+ compatible = "fsl,mpc512x-lpbfifo";
+ reg = <0x10100 0x50>;
+ interrupts = <7 0x8>;
+ dmas = <&dma0 26>;
+ dma-names = "rx-tx";
+ };
+
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
new file mode 100644
index 000000000..d096cf461
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
@@ -0,0 +1,198 @@
+MPC5200 Device Tree Bindings
+----------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+Naming conventions
+------------------
+For mpc5200 on-chip devices, the format for each compatible value is
+<chip>-<device>[-<mode>]. The OS should be able to match a device driver
+to the device based solely on the compatible value. If two drivers
+match on the compatible list; the 'most compatible' driver should be
+selected.
+
+The split between the MPC5200 and the MPC5200B leaves a bit of a
+conundrum. How should the compatible property be set up to provide
+maximum compatibility information; but still accurately describe the
+chip? For the MPC5200; the answer is easy. Most of the SoC devices
+originally appeared on the MPC5200. Since they didn't exist anywhere
+else; the 5200 compatible properties will contain only one item;
+"fsl,mpc5200-<device>".
+
+The 5200B is almost the same as the 5200, but not quite. It fixes
+silicon bugs and it adds a small number of enhancements. Most of the
+devices either provide exactly the same interface as on the 5200. A few
+devices have extra functions but still have a backwards compatible mode.
+To express this information as completely as possible, 5200B device trees
+should have two items in the compatible list:
+ compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
+
+It is *strongly* recommended that 5200B device trees follow this convention
+(instead of only listing the base mpc5200 item).
+
+ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
+ ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
+
+Modal devices, like PSCs, also append the configured function to the
+end of the compatible field. ie. A PSC in i2s mode would specify
+"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to
+avoid naming conflicts with non-psc devices providing the same
+function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
+the mpc5200 simple spi device and a PSC spi mode respectively.
+
+At the time of writing, exact chip may be either 'fsl,mpc5200' or
+'fsl,mpc5200b'.
+
+The soc node
+------------
+This node describes the on chip SOC peripherals. Every mpc5200 based
+board will have this node, and as such there is a common naming
+convention for SOC devices.
+
+Required properties:
+name description
+---- -----------
+ranges Memory range of the internal memory mapped registers.
+ Should be <0 [baseaddr] 0xc000>
+reg Should be <[baseaddr] 0x100>
+compatible mpc5200: "fsl,mpc5200-immr"
+ mpc5200b: "fsl,mpc5200b-immr"
+system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI
+ clocks are derived from the fsystem clock.
+bus-frequency IPB bus frequency in Hz. Clock rate
+ used by most of the soc devices.
+
+soc child nodes
+---------------
+Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+
+Note: The tables below show the value for the mpc5200. A mpc5200b device
+tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
+
+Required soc5200 child nodes:
+name compatible Description
+---- ---------- -----------
+cdm@<addr> fsl,mpc5200-cdm Clock Distribution
+interrupt-controller@<addr> fsl,mpc5200-pic need an interrupt
+ controller to boot
+bestcomm@<addr> fsl,mpc5200-bestcomm Bestcomm DMA controller
+
+Recommended soc5200 child nodes; populate as needed for your board
+name compatible Description
+---- ---------- -----------
+timer@<addr> fsl,mpc5200-gpt General purpose timers
+gpio@<addr> fsl,mpc5200-gpio MPC5200 simple gpio controller
+gpio@<addr> fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller
+rtc@<addr> fsl,mpc5200-rtc Real time clock
+mscan@<addr> fsl,mpc5200-mscan CAN bus controller
+pci@<addr> fsl,mpc5200-pci PCI bridge
+serial@<addr> fsl,mpc5200-psc-uart PSC in serial mode
+i2s@<addr> fsl,mpc5200-psc-i2s PSC in i2s mode
+ac97@<addr> fsl,mpc5200-psc-ac97 PSC in ac97 mode
+spi@<addr> fsl,mpc5200-psc-spi PSC in spi mode
+irda@<addr> fsl,mpc5200-psc-irda PSC in IrDA mode
+spi@<addr> fsl,mpc5200-spi MPC5200 spi device
+ethernet@<addr> fsl,mpc5200-fec MPC5200 ethernet device
+ata@<addr> fsl,mpc5200-ata IDE ATA interface
+i2c@<addr> fsl,mpc5200-i2c I2C controller
+usb@<addr> fsl,mpc5200-ohci,ohci-be USB controller
+xlb@<addr> fsl,mpc5200-xlb XLB arbitrator
+
+fsl,mpc5200-gpt nodes
+---------------------
+On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board
+design supports the internal wdt, then the device node for GPT0 should
+include the empty property 'fsl,has-wdt'. Note that this does not activate
+the watchdog. The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used. The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+ fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds. If n=0, the
+configuration of the watchdog is not touched. This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+ the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
+
+An mpc5200-gpt can be used as a single line GPIO controller. To do so,
+add the following properties to the gpt node:
+ gpio-controller;
+ #gpio-cells = <2>;
+When referencing the GPIO line from another node, the first cell must always
+be zero and the second cell represents the gpio flags and described in the
+gpio device tree binding.
+
+An mpc5200-gpt can be used as a single line edge sensitive interrupt
+controller. To do so, add the following properties to the gpt node:
+ interrupt-controller;
+ #interrupt-cells = <1>;
+When referencing the IRQ line from another node, the cell represents the
+sense mode; 1 for edge rising, 2 for edge falling.
+
+fsl,mpc5200-psc nodes
+---------------------
+The PSCs should include a cell-index which is the index of the PSC in
+hardware. cell-index is used to determine which shared SoC registers to
+use when setting up PSC clocking. cell-index number starts at '0'. ie:
+ PSC1 has 'cell-index = <0>'
+ PSC4 has 'cell-index = <3>'
+
+PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in
+i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+compatible field.
+
+
+fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
+------------------------------------------------
+Each GPIO controller node should have the empty property gpio-controller and
+#gpio-cells set to 2. First cell is the GPIO number which is interpreted
+according to the bit numbers in the GPIO control registers. The second cell
+is for flags which is currently unused.
+
+fsl,mpc5200-fec nodes
+---------------------
+The FEC node can specify one of the following properties to configure
+the MII link:
+- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
+ mode instead of MII
+- current-speed - Specifies that the MII should be configured for a fixed
+ speed. This property should contain two cells. The
+ first cell specifies the speed in Mbps and the second
+ should be '0' for half duplex and '1' for full duplex
+- phy-handle - Contains a phandle to an Ethernet PHY.
+
+Interrupt controller (fsl,mpc5200-pic) node
+-------------------------------------------
+The mpc5200 pic binding splits hardware IRQ numbers into two levels. The
+split reflects the layout of the PIC hardware itself, which groups
+interrupts into one of three groups; CRIT, MAIN or PERP. Also, the
+Bestcomm dma engine has it's own set of interrupt sources which are
+cascaded off of peripheral interrupt 0, which the driver interprets as a
+fourth group, SDMA.
+
+The interrupts property for device nodes using the mpc5200 pic consists
+of three cells; <L1 L2 level>
+
+ L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+ L2 := interrupt number; directly mapped from the value in the
+ "ICTL PerStat, MainStat, CritStat Encoded Register"
+ level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+
+For external IRQs, use the following interrupt property values (how to
+specify external interrupts is a frequently asked question):
+External interrupts:
+ external irq0: interrupts = <0 0 n>;
+ external irq1: interrupts = <1 1 n>;
+ external irq2: interrupts = <1 2 n>;
+ external irq3: interrupts = <1 3 n>;
+'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
+
+fsl,mpc5200-mscan nodes
+-----------------------
+See file Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
new file mode 100644
index 000000000..bc8ded641
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
@@ -0,0 +1,63 @@
+* FSL MPIC Message Registers
+
+This binding specifies what properties must be available in the device tree
+representation of the message register blocks found in some FSL MPIC
+implementations.
+
+Required properties:
+
+ - compatible: Specifies the compatibility list for the message register
+ block. The type shall be <string-list> and the value shall be of the form
+ "fsl,mpic-v<version>-msgr", where <version> is the version number of
+ the MPIC containing the message registers.
+
+ - reg: Specifies the base physical address(s) and size(s) of the
+ message register block's addressable register space. The type shall be
+ <prop-encoded-array>.
+
+ - interrupts: Specifies a list of interrupt-specifiers which are available
+ for receiving interrupts. Interrupt-specifier consists of two cells: first
+ cell is interrupt-number and second cell is level-sense. The type shall be
+ <prop-encoded-array>.
+
+Optional properties:
+
+ - mpic-msgr-receive-mask: Specifies what registers in the containing block
+ are allowed to receive interrupts. The value is a bit mask where a set
+ bit at bit 'n' indicates that message register 'n' can receive interrupts.
+ Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
+ be <u32>. If not present, then all of the message registers in the block
+ are available.
+
+Aliases:
+
+ An alias should be created for every message register block. They are not
+ required, though. However, a particular implementation of this binding
+ may require aliases to be present. Aliases are of the form
+ 'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
+ Numbers shall start at 0.
+
+Example:
+
+ aliases {
+ mpic-msgr-block0 = &mpic_msgr_block0;
+ mpic-msgr-block1 = &mpic_msgr_block1;
+ };
+
+ mpic_msgr_block0: mpic-msgr-block@41400 {
+ compatible = "fsl,mpic-v3.1-msgr";
+ reg = <0x41400 0x200>;
+ // Message registers 0 and 2 in this block can receive interrupts on
+ // sources 0xb0 and 0xb2, respectively.
+ interrupts = <0xb0 2 0xb2 2>;
+ mpic-msgr-receive-mask = <0x5>;
+ };
+
+ mpic_msgr_block1: mpic-msgr-block@42400 {
+ compatible = "fsl,mpic-v3.1-msgr";
+ reg = <0x42400 0x200>;
+ // Message registers 0 and 2 in this block can receive interrupts on
+ // sources 0xb4 and 0xb6, respectively.
+ interrupts = <0xb4 2 0xb6 2>;
+ mpic-msgr-receive-mask = <0x5>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
new file mode 100644
index 000000000..df4195814
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
@@ -0,0 +1,38 @@
+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions. The first is the main timer register bank
+ (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx). The second is the timer control
+ register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+ timer interrupts can be used. This property is optional; without this,
+ all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+ with timer zero. If timer-available-ranges is present, only the
+ interrupts that correspond to available timers shall be present.
+
+Example:
+ /* Note that this requires #interrupt-cells to be 4 */
+ timer0: timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+
+ /* Another AMP partition is using timers 0 and 1 */
+ fsl,available-ranges = <2 2>;
+
+ interrupts = <2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer1: timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
new file mode 100644
index 000000000..dc5744636
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
@@ -0,0 +1,231 @@
+=====================================================================
+Freescale MPIC Interrupt Controller Node
+Copyright (C) 2010,2011 Freescale Semiconductor Inc.
+=====================================================================
+
+The Freescale MPIC interrupt controller is found on all PowerQUICC
+and QorIQ processors and is compatible with the Open PIC. The
+notable difference from Open PIC binding is the addition of 2
+additional cells in the interrupt specifier defining interrupt type
+information.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Shall include "fsl,mpic". Freescale MPIC
+ controllers compatible with this binding have Block
+ Revision Registers BRR1 and BRR2 at offset 0x0 and
+ 0x10 in the MPIC.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ offset and length of the device's registers within the
+ CCSR address space.
+
+ - interrupt-controller
+ Usage: required
+ Value type: <empty>
+ Definition: Specifies that this node is an interrupt
+ controller
+
+ - #interrupt-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Shall be 2 or 4. A value of 2 means that interrupt
+ specifiers do not contain the interrupt-type or type-specific
+ information cells.
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Shall be 0.
+
+ - pic-no-reset
+ Usage: optional
+ Value type: <empty>
+ Definition: The presence of this property specifies that the
+ MPIC must not be reset by the client program, and that
+ the boot program has initialized all interrupt source
+ configuration registers to a sane state-- masked or
+ directed at other cores. This ensures that the client
+ program will not receive interrupts for sources not belonging
+ to the client. The presence of this property also mandates
+ that any initialization related to interrupt sources shall
+ be limited to sources explicitly referenced in the device tree.
+
+ - big-endian
+ Usage: optional
+ Value type: <empty>
+ If present the MPIC will be assumed to be big-endian. Some
+ device-trees omit this property on MPIC nodes even when the MPIC is
+ in fact big-endian, so certain boards override this property.
+
+ - single-cpu-affinity
+ Usage: optional
+ Value type: <empty>
+ If present the MPIC will be assumed to only be able to route
+ non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC).
+
+ - last-interrupt-source
+ Usage: optional
+ Value type: <u32>
+ Some MPICs do not correctly report the number of hardware sources
+ in the global feature registers. If specified, this field will
+ override the value read from MPIC_GREG_FEATURE_LAST_SRC.
+
+INTERRUPT SPECIFIER DEFINITION
+
+ Interrupt specifiers consists of 4 cells encoded as
+ follows:
+
+ <1st-cell> interrupt-number
+
+ Identifies the interrupt source. The meaning
+ depends on the type of interrupt.
+
+ Note: If the interrupt-type cell is undefined
+ (i.e. #interrupt-cells = 2), this cell
+ should be interpreted the same as for
+ interrupt-type 0-- i.e. an external or
+ normal SoC device interrupt.
+
+ <2nd-cell> level-sense information, encoded as follows:
+ 0 = low-to-high edge triggered
+ 1 = active low level-sensitive
+ 2 = active high level-sensitive
+ 3 = high-to-low edge triggered
+
+ <3rd-cell> interrupt-type
+
+ The following types are supported:
+
+ 0 = external or normal SoC device interrupt
+
+ The interrupt-number cell contains
+ the SoC device interrupt number. The
+ type-specific cell is undefined. The
+ interrupt-number is derived from the
+ MPIC a block of registers referred to as
+ the "Interrupt Source Configuration Registers".
+ Each source has 32-bytes of registers
+ (vector/priority and destination) in this
+ region. So interrupt 0 is at offset 0x0,
+ interrupt 1 is at offset 0x20, and so on.
+
+ 1 = error interrupt
+
+ The interrupt-number cell contains
+ the SoC device interrupt number for
+ the error interrupt. The type-specific
+ cell identifies the specific error
+ interrupt number.
+
+ 2 = MPIC inter-processor interrupt (IPI)
+
+ The interrupt-number cell identifies
+ the MPIC IPI number. The type-specific
+ cell is undefined.
+
+ 3 = MPIC timer interrupt
+
+ The interrupt-number cell identifies
+ the MPIC timer number. The type-specific
+ cell is undefined.
+
+ <4th-cell> type-specific information
+
+ The type-specific cell is encoded as follows:
+
+ - For interrupt-type 1 (error interrupt),
+ the type-specific cell contains the
+ bit number of the error interrupt in the
+ Error Interrupt Summary Register.
+
+EXAMPLE 1
+ /*
+ * mpic interrupt controller with 4 cells per specifier
+ */
+ mpic: pic@40000 {
+ compatible = "fsl,mpic";
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ #address-cells = <0>;
+ reg = <0x40000 0x40000>;
+ };
+
+EXAMPLE 2
+ /*
+ * The MPC8544 I2C controller node has an internal
+ * interrupt number of 27. As per the reference manual
+ * this corresponds to interrupt source configuration
+ * registers at 0x5_0560.
+ *
+ * The interrupt source configuration registers begin
+ * at 0x5_0000.
+ *
+ * To compute the interrupt specifier interrupt number
+ *
+ * 0x560 >> 5 = 43
+ *
+ * The interrupt source configuration registers begin
+ * at 0x5_0000, and so the i2c vector/priority registers
+ * are at 0x5_0560.
+ */
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+
+EXAMPLE 3
+ /*
+ * Definition of a node defining the 4
+ * MPIC IPI interrupts. Note the interrupt
+ * type of 2.
+ */
+ ipi@410a0 {
+ compatible = "fsl,mpic-ipi";
+ reg = <0x40040 0x10>;
+ interrupts = <0 0 2 0
+ 1 0 2 0
+ 2 0 2 0
+ 3 0 2 0>;
+ };
+
+EXAMPLE 4
+ /*
+ * Definition of a node defining the MPIC
+ * global timers. Note the interrupt
+ * type of 3.
+ */
+ timer0: timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+ };
+
+EXAMPLE 5
+ /*
+ * Definition of an error interrupt (interrupt type 1).
+ * SoC interrupt number is 16 and the specific error
+ * interrupt bit in the error interrupt summary register
+ * is 23.
+ */
+ memory-controller@8000 {
+ compatible = "fsl,p4080-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
new file mode 100644
index 000000000..f8d2b7fe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -0,0 +1,111 @@
+* Freescale MSI interrupt controller
+
+Required properties:
+- compatible : compatible list, may contain one or two entries
+ The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+ etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+ "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+ version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+ provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+ should be used. The first entry is optional; the second entry is
+ required.
+
+- reg : It may contain one or two regions. The first region should contain
+ the address and the length of the shared message interrupt register set.
+ The second region should contain the address of aliased MSIIR or MSIIR1
+ register for platforms that have such an alias, if using MSIIR1, the second
+ region must be added because different MSI group has different MSIIR1 offset.
+
+- interrupts : each one of the interrupts here is one entry per 32 MSIs,
+ and routed to the host interrupt controller. the interrupts should
+ be set as edge sensitive. If msi-available-ranges is present, only
+ the interrupts that correspond to available ranges shall be present.
+
+Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+ msi interrupt can be used in the 256 msi interrupts. This property is
+ optional, without this, all the MSI interrupts can be used.
+ Each available range must begin and end on a multiple of 32 (i.e.
+ no splitting an individual MSI register or the associated PIC interrupt).
+ MPIC v4.3 does not support this property because the 32 interrupts of an
+ individual register are not continuous when using MSIIR1.
+
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+ is used for MSI messaging. The address of MSIIR in PCI address space is
+ the MSI message address.
+
+ This property may be used in virtualized environments where the hypervisor
+ has created an alternate mapping for the MSIR block. See below for an
+ explanation.
+
+
+Example:
+ msi@41600 {
+ compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpic-msi-v4.3";
+ reg = <0x41600 0x200 0x44148 4>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0
+ 0x100 0 0 0
+ 0x101 0 0 0
+ 0x102 0 0 0
+ 0x103 0 0 0
+ 0x104 0 0 0
+ 0x105 0 0 0
+ 0x106 0 0 0
+ 0x107 0 0 0>;
+ };
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window. The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical"). However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address. Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives). The first subwindow after the end of guest memory is used for
+this. The address specified in the msi-address-64 property is the PCI
+address of MSIIR. The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
new file mode 100644
index 000000000..b21ab85de
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -0,0 +1,148 @@
+Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding
+
+DESCRIPTION
+
+The PAMU is an I/O MMU that provides device-to-memory access control and
+address translation capabilities.
+
+Required properties:
+
+- compatible : <string>
+ First entry is a version-specific string, such as
+ "fsl,pamu-v1.0". The second is "fsl,pamu".
+- ranges : <prop-encoded-array>
+ A standard property. Utilized to describe the memory mapped
+ I/O space utilized by the controller. The size should
+ be set to the total size of the register space of all
+ physically present PAMU controllers. For example, for
+ PAMU v1.0, on an SOC that has five PAMU devices, the size
+ is 0x5000.
+- interrupts : <prop-encoded-array>
+ Interrupt mappings. The first tuple is the normal PAMU
+ interrupt, used for reporting access violations. The second
+ is for PAMU hardware errors, such as PAMU operation errors
+ and ECC errors.
+- #address-cells: <u32>
+ A standard property.
+- #size-cells : <u32>
+ A standard property.
+
+Optional properties:
+- reg : <prop-encoded-array>
+ A standard property. It represents the CCSR registers of
+ all child PAMUs combined. Include it to provide support
+ for legacy drivers.
+- fsl,portid-mapping : <u32>
+ The Coherency Subdomain ID Port Mapping Registers and
+ Snoop ID Port Mapping registers, which are part of the
+ CoreNet Coherency fabric (CCF), provide a CoreNet
+ Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping
+ functions. Certain bits from these registers should be
+ set if PAMUs should be snooped. This property defines
+ a bitmask which selects the bits that should be set if
+ PAMUs should be snooped.
+
+Child nodes:
+
+Each child node represents one PAMU controller. Each SOC device that is
+connected to a specific PAMU device should have a "fsl,pamu-phandle" property
+that links to the corresponding specific child PAMU controller.
+
+- reg : <prop-encoded-array>
+ A standard property. Specifies the physical address and
+ length (relative to the parent 'ranges' property) of this
+ PAMU controller's configuration registers. The size should
+ be set to the size of this PAMU controllers's register space.
+ For PAMU v1.0, this size is 0x1000.
+- fsl,primary-cache-geometry
+ : <prop-encoded-array>
+ Two cells that specify the geometry of the primary PAMU
+ cache. The first is the number of cache lines, and the
+ second is the number of "ways". For direct-mapped caches,
+ specify a value of 1.
+- fsl,secondary-cache-geometry
+ : <prop-encoded-array>
+ Two cells that specify the geometry of the secondary PAMU
+ cache. The first is the number of cache lines, and the
+ second is the number of "ways". For direct-mapped caches,
+ specify a value of 1.
+
+Device nodes:
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+ : <phandle>
+ Phandle to the single, specific PAMU controller node to which
+ this device is connect. The PAMU topology is represented in
+ the device tree to assist code that dynamically determines the
+ best LIODN values to minimize PAMU cache thrashing.
+
+- fsl,liodn-reg : <prop-encoded-array>
+ Two cells that specify the location of the LIODN register
+ for this device. Required for devices that have a single
+ LIODN. The first cell is a phandle to a node that contains
+ the registers where the LIODN is to be set. The second is
+ the offset from the first "reg" resource of the node where
+ the specific LIODN register is located.
+
+
+Example:
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ ranges = <0 0x20000 0x5000>;
+ fsl,portid-mapping = <0xf80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu4: pamu@4000 {
+ reg = <0x4000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+ };
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
new file mode 100644
index 000000000..07256b7ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
@@ -0,0 +1,63 @@
+* Power Management Controller
+
+Properties:
+- compatible: "fsl,<chip>-pmc".
+
+ "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
+ compatible. "fsl,mpc8313-pmc" should also be listed for any chip
+ whose PMC is compatible, and implies deep-sleep capability.
+
+ "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
+ compatible. "fsl,mpc8536-pmc" should also be listed for any chip
+ whose PMC is compatible, and implies deep-sleep capability.
+
+ "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
+ compatible; all statements below that apply to "fsl,mpc8548-pmc" also
+ apply to "fsl,mpc8641d-pmc".
+
+ Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+ bit assignments are indicated via the sleep specifier in each device's
+ sleep property.
+
+- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
+ is the PMC block, and the second resource is the Clock Configuration
+ block.
+
+ For devices compatible with "fsl,mpc8548-pmc", the first resource
+ is a 32-byte block beginning with DEVDISR.
+
+- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
+ resource is the PMC block interrupt.
+
+- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
+ this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
+ a wakeup source from deep sleep.
+
+Sleep specifiers:
+
+ fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit
+ that is set in the cell, the corresponding bit in SCCR will be saved
+ and cleared on suspend, and restored on resume. This sleep controller
+ supports disabling and resuming devices at any time.
+
+ fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
+ which will be ORed into PMCDR upon suspend, and cleared from PMCDR
+ upon resume. The first two cells are as described for fsl,mpc8578-pmc.
+ This sleep controller only supports disabling devices during system
+ sleep, or permanently.
+
+ fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
+ first of which will be ORed into DEVDISR (and the second into
+ DEVDISR2, if present -- this cell should be zero or absent if the
+ hardware does not have DEVDISR2) upon a request for permanent device
+ disabling. This sleep controller does not support configuring devices
+ to disable during system sleep (unless supported by another compatible
+ match), or dynamically.
+
+Example:
+
+ power@b00 {
+ compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 8>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
new file mode 100644
index 000000000..4ad29b9ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators. Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible: Should contain "fsl,raideng-v1.0" as the value
+ This identifies RAID Engine block. 1 in 1.0 represents
+ major number whereas 0 represents minor number. The
+ version matches the hardware IP version.
+- reg: offset and length of the register set for the device
+- ranges: standard ranges property specifying the translation
+ between child address space and parent address space
+
+Example:
+ /* P5020 */
+ raideng: raideng@320000 {
+ compatible = "fsl,raideng-v1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x320000 0x10000>;
+ ranges = <0 0x320000 0x10000>;
+ };
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible: Should contain "fsl,raideng-v1.0-job-queue" as the value
+ This identifies the job queue interface
+- reg: offset and length of the register set for job queue
+- ranges: standard ranges property specifying the translation
+ between child address space and parent address space
+
+Example:
+ /* P5020 */
+ raideng_jq0@1000 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+ };
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible: Must contain "fsl,raideng-v1.0-job-ring" as the value
+ This identifies job ring. Should contain either
+ "fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+ depending upon whether ring has high or low priority
+- reg: offset and length of the register set for job ring
+- interrupts: interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn: Specifies the LIODN to be used for Job Ring. This
+ property is normally set by firmware. Value
+ is of 12-bits which is the LIODN number for this JR.
+ This property is used by the IOMMU (PAMU) to distinquish
+ transactions from this JR and than be able to do address
+ translation & protection accordingly.
+
+Example:
+ /* P5020 */
+ raideng_jq0@1000 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+
+ raideng_jr0: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <139 2 0 0>;
+ interrupt-parent = <&mpic>;
+ fsl,liodn = <0x41>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
new file mode 100644
index 000000000..0532c46b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
@@ -0,0 +1,18 @@
+Freescale Supplement configuration unit (SCFG)
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+
+- compatible: should be "fsl,<chip>-scfg"
+- reg: should contain base address and length of SCFG memory-mapped
+registers
+
+Example:
+
+ scfg: global-utilities@fc000 {
+ compatible = "fsl,t1040-scfg";
+ reg = <0xfc000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
new file mode 100644
index 000000000..0496ada4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
@@ -0,0 +1,163 @@
+Message unit node:
+
+For SRIO controllers that implement the message unit as part of the controller
+this node is required. For devices with RMAN this node should NOT exist. The
+node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
+"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
+
+See srio.txt for more details about generic SRIO controller details.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - fsl,liodn
+ Usage: optional-but-recommended (for devices with PAMU)
+ Value type: <prop-encoded-array>
+ Definition: The logical I/O device number for the PAMU (IOMMU) to be
+ correctly configured for SRIO accesses. The property should
+ not exist on devices that do not support PAMU.
+
+ The LIODN value is associated with all RMU transactions
+ (msg-unit, doorbell, port-write).
+
+Sub-Nodes for RMU: The RMU node is composed of multiple sub-nodes that
+correspond to the actual sub-controllers in the RMU. The manual for a given
+SoC will detail which and how many of these sub-controllers are implemented.
+
+Message Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A pair of IRQs are specified in this property. The first
+ element is associated with the transmit (TX) interrupt and the
+ second element is associated with the receive (RX) interrupt.
+
+Doorbell Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include:
+ "fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A pair of IRQs are specified in this property. The first
+ element is associated with the transmit (TX) interrupt and the
+ second element is associated with the receive (RX) interrupt.
+
+Port-Write Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include:
+ "fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles port-write conditions is
+ specified by this property. (Typically shared with error).
+
+ Note: All other standard properties (see the Devicetree Specification)
+ are allowed but are optional.
+
+Example:
+ rmu: rmu@d3000 {
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x400>;
+ ranges = <0x0 0xd3000 0x400>;
+ fsl,liodn = <0xc8>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
new file mode 100644
index 000000000..86ee6ea73
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -0,0 +1,104 @@
+* Freescale Serial RapidIO (SRIO) Controller
+
+RapidIO port node:
+Properties:
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio" for IP blocks with IP Block
+ Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
+
+ Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
+ version in IP Block Revision Register and Y is Minor version. If this
+ compatible is provided it should be ordered before "fsl,srio".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers. The size should
+ be set to 0x11000.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles error conditions is specified by this
+ property. (Typically shared with port-write).
+
+ - fsl,srio-rmu-handle:
+ Usage: required if rmu node is defined
+ Value type: <phandle>
+ Definition: A single <phandle> value that points to the RMU.
+ (See srio-rmu.txt for more details on RMU node binding)
+
+Port Child Nodes: There should a port child node for each port that exists in
+the controller. The ports are numbered starting at one (1) and should have
+the following properties:
+
+ - cell-index
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Matches the port id.
+
+ - ranges
+ Usage: required if local access windows preset
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Utilized to describe the memory mapped
+ IO space utilized by the controller. This corresponds to the
+ setting of the local access windows that are targeted to this
+ SRIO port.
+
+ - fsl,liodn
+ Usage: optional-but-recommended (for devices with PAMU)
+ Value type: <prop-encoded-array>
+ Definition: The logical I/O device number for the PAMU (IOMMU) to be
+ correctly configured for SRIO accesses. The property should
+ not exist on devices that do not support PAMU.
+
+ For HW (ie, the P4080) that only supports a LIODN for both
+ memory and maintenance transactions then a single LIODN is
+ represented in the property for both transactions.
+
+ For HW (ie, the P304x/P5020, etc) that supports an LIODN for
+ memory transactions and a unique LIODN for maintenance
+ transactions then a pair of LIODNs are represented in the
+ property. Within the pair, the first element represents the
+ LIODN associated with memory transactions and the second element
+ represents the LIODN associated with maintenance transactions
+ for the port.
+
+Note: All other standard properties (see the Devicetree Specification)
+are allowed but are optional.
+
+Example:
+
+ rapidio: rapidio@ffe0c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>; /* err_irq */
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ cell-index = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,liodn = <34>;
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+
+ port2 {
+ cell-index = <2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,liodn = <48>;
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt
new file mode 100644
index 000000000..5af426e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt
@@ -0,0 +1,248 @@
+*** NOTE ***
+This document is copied from OPAL firmware
+(skiboot/doc/device-tree/ibm,powerpc-cpu-features/binding.txt)
+
+There is more complete overview and documentation of features in that
+source tree. All patches and modifications should go there.
+************
+
+ibm,powerpc-cpu-features binding
+================================
+
+This device tree binding describes CPU features available to software, with
+enablement, privilege, and compatibility metadata.
+
+More general description of design and implementation of this binding is
+found in design.txt, which also points to documentation of specific features.
+
+
+/cpus/ibm,powerpc-cpu-features node binding
+-------------------------------------------
+
+Node: ibm,powerpc-cpu-features
+
+Description: Container of CPU feature nodes.
+
+The node name must be "ibm,powerpc-cpu-features".
+
+It is implemented as a child of the node "/cpus", but this must not be
+assumed by parsers.
+
+The node is optional but should be provided by new OPAL firmware.
+
+Properties:
+
+- compatible
+ Usage: required
+ Value type: string
+ Definition: "ibm,powerpc-cpu-features"
+
+ This compatibility refers to backwards compatibility of the overall
+ design with parsers that behave according to these guidelines. This can
+ be extended in a backward compatible manner which would not warrant a
+ revision of the compatible property.
+
+- isa
+ Usage: required
+ Value type: <u32>
+ Definition:
+
+ isa that the CPU is currently running in. This provides instruction set
+ compatibility, less the individual feature nodes. For example, an ISA v3.0
+ implementation that lacks the "transactional-memory" cpufeature node
+ should not use transactional memory facilities.
+
+ Value corresponds to the "Power ISA Version" multiplied by 1000.
+ For example, <3000> corresponds to Version 3.0, <2070> to Version 2.07.
+ The minor digit is available for revisions.
+
+- display-name
+ Usage: optional
+ Value type: string
+ Definition:
+
+ A human readable name for the CPU.
+
+/cpus/ibm,powerpc-cpu-features/example-feature node bindings
+----------------------------------------------------------------
+
+Each child node of cpu-features represents a CPU feature / capability.
+
+Node: A string describing an architected CPU feature, e.g., "floating-point".
+
+Description: A feature or capability supported by the CPUs.
+
+The name of the node is a human readable string that forms the interface
+used to describe features to software. Features are currently documented
+in the code where they are implemented in skiboot/core/cpufeatures.c
+
+Presence of the node indicates the feature is available.
+
+Properties:
+
+- isa
+ Usage: required
+ Value type: <u32>
+ Definition:
+
+ First level of the Power ISA that the feature appears in.
+ Software should filter out features when constraining the
+ environment to a particular ISA version.
+
+ Value is defined similarly to /cpus/features/isa
+
+- usable-privilege
+ Usage: required
+ Value type: <u32> bit mask
+ Definition:
+ Bit numbers are LSB0
+ bit 0 - PR (problem state / user mode)
+ bit 1 - OS (privileged state)
+ bit 2 - HV (hypervisor state)
+ All other bits reserved and should be zero.
+
+ This property describes the privilege levels and/or software components
+ that can use the feature.
+
+ If bit 0 is set, then the hwcap-bit-nr property will exist.
+
+
+- hv-support
+ Usage: optional
+ Value type: <u32> bit mask
+ Definition:
+ Bit numbers are LSB0
+ bit 0 - HFSCR
+ All other bits reserved and should be zero.
+
+ This property describes the HV privilege support required to enable the
+ feature to lesser privilege levels. If the property does not exist then no
+ support is required.
+
+ If no bits are set, the hypervisor must have explicit/custom support for
+ this feature.
+
+ If the HFSCR bit is set, then the hfscr-bit-nr property will exist and
+ the feature may be enabled by setting this bit in the HFSCR register.
+
+
+- os-support
+ Usage: optional
+ Value type: <u32> bit mask
+ Definition:
+ Bit numbers are LSB0
+ bit 0 - FSCR
+ All other bits reserved and should be zero.
+
+ This property describes the OS privilege support required to enable the
+ feature to lesser privilege levels. If the property does not exist then no
+ support is required.
+
+ If no bits are set, the operating system must have explicit/custom support
+ for this feature.
+
+ If the FSCR bit is set, then the fscr-bit-nr property will exist and
+ the feature may be enabled by setting this bit in the FSCR register.
+
+
+- hfscr-bit-nr
+ Usage: optional
+ Value type: <u32>
+ Definition: HFSCR bit position (LSB0)
+
+ This property exists when the hv-support property HFSCR bit is set. This
+ property describes the bit number in the HFSCR register that the
+ hypervisor must set in order to enable this feature.
+
+ This property also exists if an HFSCR bit corresponds with this feature.
+ This makes CPU feature parsing slightly simpler.
+
+
+- fscr-bit-nr
+ Usage: optional
+ Value type: <u32>
+ Definition: FSCR bit position (LSB0)
+
+ This property exists when the os-support property FSCR bit is set. This
+ property describes the bit number in the FSCR register that the
+ operating system must set in order to enable this feature.
+
+ This property also exists if an FSCR bit corresponds with this feature.
+ This makes CPU feature parsing slightly simpler.
+
+
+- hwcap-bit-nr
+ Usage: optional
+ Value type: <u32>
+ Definition: Linux ELF AUX vector bit position (LSB0)
+
+ This property may exist when the usable-privilege property value has PR bit set.
+ This property describes the bit number that should be set in the ELF AUX
+ hardware capability vectors in order to advertise this feature to userspace.
+ Bits 0-31 correspond to bits 0-31 in AT_HWCAP vector. Bits 32-63 correspond
+ to 0-31 in AT_HWCAP2 vector, and so on. Missing AT_HWCAPx vectors implies
+ that the feature is not enabled or can not be advertised. Operating systems
+ may provide a number of unassigned hardware capability bits to allow for new
+ features to be advertised.
+
+ Some properties representing features created before this binding are
+ advertised to userspace without a one-to-one hwcap bit number may not specify
+ this bit. Operating system will handle those bits specifically. All new
+ features usable by userspace will have a hwcap-bit-nr property.
+
+
+- dependencies
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition:
+
+ If this property exists then it is a list of phandles to cpu feature
+ nodes that must be enabled for this feature to be enabled.
+
+
+Example
+-------
+
+ /cpus/ibm,powerpc-cpu-features {
+ compatible = "ibm,powerpc-cpu-features";
+
+ isa = <3020>;
+
+ darn {
+ isa = <3000>;
+ usable-privilege = <1 | 2 | 4>;
+ hwcap-bit-nr = <xx>;
+ };
+
+ scv {
+ isa = <3000>;
+ usable-privilege = <1 | 2>;
+ os-support = <0>;
+ hwcap-bit-nr = <xx>;
+ };
+
+ stop {
+ isa = <3000>;
+ usable-privilege = <2 | 4>;
+ hv-support = <0>;
+ os-support = <0>;
+ };
+
+ vsx2 (hypothetical) {
+ isa = <3010>;
+ usable-privilege = <1 | 2 | 4>;
+ hv-support = <0>;
+ os-support = <0>;
+ hwcap-bit-nr = <xx>;
+ };
+
+ vsx2-newinsns {
+ isa = <3020>;
+ usable-privilege = <1 | 2 | 4>;
+ os-support = <1>;
+ fscr-bit-nr = <xx>;
+ hwcap-bit-nr = <xx>;
+ dependencies = <&vsx2>;
+ };
+
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/ibm,vas.txt b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt
new file mode 100644
index 000000000..bf11d2faf
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt
@@ -0,0 +1,22 @@
+* IBM Powerpc Virtual Accelerator Switchboard (VAS)
+
+VAS is a hardware mechanism that allows kernel subsystems and user processes
+to directly submit compression and other requests to Nest accelerators (NX)
+or other coprocessors functions.
+
+Required properties:
+- compatible : should be "ibm,vas".
+- ibm,vas-id : A unique identifier for each instance of VAS in the system
+- reg : Should contain 4 pairs of 64-bit fields specifying the Hypervisor
+ window context start and length, OS/User window context start and length,
+ "Paste address" start and length, "Paste window id" start bit and number
+ of bits)
+
+Example:
+
+ vas@6019100000000 {
+ compatible = "ibm,vas", "ibm,power9-vas";
+ reg = <0x6019100000000 0x2000000 0x6019000000000 0x100000000 0x8000000000000 0x100000000 0x20 0x10>;
+ name = "vas";
+ ibm,vas-id = <0x1>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt
new file mode 100644
index 000000000..b558585b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt
@@ -0,0 +1,109 @@
+
+Nintendo GameCube device tree
+=============================
+
+1) The "flipper" node
+
+ This node represents the multi-function "Flipper" chip, which packages
+ many of the devices found in the Nintendo GameCube.
+
+ Required properties:
+
+ - compatible : Should be "nintendo,flipper"
+
+1.a) The Video Interface (VI) node
+
+ Represents the interface between the graphics processor and a external
+ video encoder.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-vi"
+ - reg : should contain the VI registers location and length
+ - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+ Represents the data and control interface between the main processor
+ and graphics and audio processor.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-pi"
+ - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+ Represents the interrupt controller within the "Flipper" chip.
+ The node for the "Flipper" interrupt controller must be placed under
+ the PI node.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-pic"
+
+1.c) The Digital Signal Procesor (DSP) node
+
+ Represents the digital signal processor interface, designed to offload
+ audio related tasks.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-dsp"
+ - reg : should contain the DSP registers location and length
+ - interrupts : should contain the DSP interrupt
+
+1.c.i) The Auxiliary RAM (ARAM) node
+
+ Represents the non cpu-addressable ram designed mainly to store audio
+ related information.
+ The ARAM node must be placed under the DSP node.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-aram"
+ - reg : should contain the ARAM start (zero-based) and length
+
+1.d) The Disk Interface (DI) node
+
+ Represents the interface used to communicate with mass storage devices.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-di"
+ - reg : should contain the DI registers location and length
+ - interrupts : should contain the DI interrupt
+
+1.e) The Audio Interface (AI) node
+
+ Represents the interface to the external 16-bit stereo digital-to-analog
+ converter.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-ai"
+ - reg : should contain the AI registers location and length
+ - interrupts : should contain the AI interrupt
+
+1.f) The Serial Interface (SI) node
+
+ Represents the interface to the four single bit serial interfaces.
+ The SI is a proprietary serial interface used normally to control gamepads.
+ It's NOT a RS232-type interface.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-si"
+ - reg : should contain the SI registers location and length
+ - interrupts : should contain the SI interrupt
+
+1.g) The External Interface (EXI) node
+
+ Represents the multi-channel SPI-like interface.
+
+ Required properties:
+
+ - compatible : should be "nintendo,flipper-exi"
+ - reg : should contain the EXI registers location and length
+ - interrupts : should contain the EXI interrupt
+
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
new file mode 100644
index 000000000..c4d78f28d
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -0,0 +1,176 @@
+
+Nintendo Wii device tree
+========================
+
+0) The root node
+
+ This node represents the Nintendo Wii video game console.
+
+ Required properties:
+
+ - model : Should be "nintendo,wii"
+ - compatible : Should be "nintendo,wii"
+
+1) The "hollywood" node
+
+ This node represents the multi-function "Hollywood" chip, which packages
+ many of the devices found in the Nintendo Wii.
+
+ Required properties:
+
+ - compatible : Should be "nintendo,hollywood"
+
+1.a) The Video Interface (VI) node
+
+ Represents the interface between the graphics processor and a external
+ video encoder.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
+ - reg : should contain the VI registers location and length
+ - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+ Represents the data and control interface between the main processor
+ and graphics and audio processor.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
+ - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+ Represents the "Flipper" interrupt controller within the "Hollywood" chip.
+ The node for the "Flipper" interrupt controller must be placed under
+ the PI node.
+
+ Required properties:
+
+ - #interrupt-cells : <1>
+ - compatible : should be "nintendo,flipper-pic"
+ - interrupt-controller
+
+1.c) The Digital Signal Procesor (DSP) node
+
+ Represents the digital signal processor interface, designed to offload
+ audio related tasks.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
+ - reg : should contain the DSP registers location and length
+ - interrupts : should contain the DSP interrupt
+
+1.d) The Serial Interface (SI) node
+
+ Represents the interface to the four single bit serial interfaces.
+ The SI is a proprietary serial interface used normally to control gamepads.
+ It's NOT a RS232-type interface.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
+ - reg : should contain the SI registers location and length
+ - interrupts : should contain the SI interrupt
+
+1.e) The Audio Interface (AI) node
+
+ Represents the interface to the external 16-bit stereo digital-to-analog
+ converter.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
+ - reg : should contain the AI registers location and length
+ - interrupts : should contain the AI interrupt
+
+1.f) The External Interface (EXI) node
+
+ Represents the multi-channel SPI-like interface.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
+ - reg : should contain the EXI registers location and length
+ - interrupts : should contain the EXI interrupt
+
+1.g) The Open Host Controller Interface (OHCI) nodes
+
+ Represent the USB 1.x Open Host Controller Interfaces.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci"
+ - reg : should contain the OHCI registers location and length
+ - interrupts : should contain the OHCI interrupt
+
+1.h) The Enhanced Host Controller Interface (EHCI) node
+
+ Represents the USB 2.0 Enhanced Host Controller Interface.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
+ - reg : should contain the EHCI registers location and length
+ - interrupts : should contain the EHCI interrupt
+
+1.i) The Secure Digital Host Controller Interface (SDHCI) nodes
+
+ Represent the Secure Digital Host Controller Interfaces.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-sdhci","sdhci"
+ - reg : should contain the SDHCI registers location and length
+ - interrupts : should contain the SDHCI interrupt
+
+1.j) The Inter-Processor Communication (IPC) node
+
+ Represent the Inter-Processor Communication interface. This interface
+ enables communications between the Broadway and the Starlet processors.
+
+ - compatible : should be "nintendo,hollywood-ipc"
+ - reg : should contain the IPC registers location and length
+ - interrupts : should contain the IPC interrupt
+
+1.k) The "Hollywood" interrupt controller node
+
+ Represents the "Hollywood" interrupt controller within the
+ "Hollywood" chip.
+
+ Required properties:
+
+ - #interrupt-cells : <1>
+ - compatible : should be "nintendo,hollywood-pic"
+ - reg : should contain the controller registers location and length
+ - interrupt-controller
+ - interrupts : should contain the cascade interrupt of the "flipper" pic
+
+1.l) The General Purpose I/O (GPIO) controller node
+
+ see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+
+1.m) The control node
+
+ Represents the control interface used to setup several miscellaneous
+ settings of the "Hollywood" chip like boot memory mappings, resets,
+ disk interface mode, etc.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-control"
+ - reg : should contain the control registers location and length
+
+1.n) The Disk Interface (DI) node
+
+ Represents the interface used to communicate with mass storage devices.
+
+ Required properties:
+
+ - compatible : should be "nintendo,hollywood-di"
+ - reg : should contain the DI registers location and length
+ - interrupts : should contain the DI interrupt
+
diff --git a/Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt b/Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt
new file mode 100644
index 000000000..dffb79108
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt
@@ -0,0 +1,14 @@
+IBM OPAL Operator Panel Binding
+-------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-oppanel".
+- #lines : Number of lines on the operator panel e.g. <0x2>.
+- #length : Number of characters per line of the operator panel e.g. <0x10>.
+
+Example:
+ oppanel {
+ compatible = "ibm,opal-oppanel";
+ #lines = <0x2>;
+ #length = <0x10>;
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
new file mode 100644
index 000000000..9d619e955
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
@@ -0,0 +1,118 @@
+IBM Power-Management Bindings
+=============================
+
+Linux running on baremetal POWER machines has access to the processor
+idle states. The description of these idle states is exposed via the
+node @power-mgt in the device-tree by the firmware.
+
+Definitions:
+----------------
+Typically each idle state has the following associated properties:
+
+- name: The name of the idle state as defined by the firmware.
+
+- flags: indicating some aspects of this idle states such as the
+ extent of state-loss, whether timebase is stopped on this
+ idle states and so on. The flag bits are as follows:
+
+- exit-latency: The latency involved in transitioning the state of the
+ CPU from idle to running.
+
+- target-residency: The minimum time that the CPU needs to reside in
+ this idle state in order to accrue power-savings
+ benefit.
+
+Properties
+----------------
+The following properties provide details about the idle states. These
+properties are exposed as arrays. Each entry in the property array
+provides the value of that property for the idle state associated with
+the array index of that entry.
+
+If idle-states are defined, then the properties
+"ibm,cpu-idle-state-names" and "ibm,cpu-idle-state-flags" are
+required. The other properties are required unless mentioned
+otherwise. The length of all the property arrays must be the same.
+
+- ibm,cpu-idle-state-names:
+ Array of strings containing the names of the idle states.
+
+- ibm,cpu-idle-state-flags:
+ Array of unsigned 32-bit values containing the values of the
+ flags associated with the the aforementioned idle-states. The
+ flag bits are as follows:
+ 0x00000001 /* Decrementer would stop */
+ 0x00000002 /* Needs timebase restore */
+ 0x00001000 /* Restore GPRs like nap */
+ 0x00002000 /* Restore hypervisor resource from PACA pointer */
+ 0x00004000 /* Program PORE to restore PACA pointer */
+ 0x00010000 /* This is a nap state (POWER7,POWER8) */
+ 0x00020000 /* This is a fast-sleep state (POWER8)*/
+ 0x00040000 /* This is a winkle state (POWER8) */
+ 0x00080000 /* This is a fast-sleep state which requires a */
+ /* software workaround for restoring the */
+ /* timebase (POWER8) */
+ 0x00800000 /* This state uses SPR PMICR instruction */
+ /* (POWER8)*/
+ 0x00100000 /* This is a fast stop state (POWER9) */
+ 0x00200000 /* This is a deep-stop state (POWER9) */
+
+- ibm,cpu-idle-state-latencies-ns:
+ Array of unsigned 32-bit values containing the values of the
+ exit-latencies (in ns) for the idle states in
+ ibm,cpu-idle-state-names.
+
+- ibm,cpu-idle-state-residency-ns:
+ Array of unsigned 32-bit values containing the values of the
+ target-residency (in ns) for the idle states in
+ ibm,cpu-idle-state-names. On POWER8 this is an optional
+ property. If the property is absent, the target residency for
+ the "Nap", "FastSleep" are defined to 10000 and 300000000
+ respectively by the kernel. On POWER9 this property is required.
+
+- ibm,cpu-idle-state-psscr:
+ Array of unsigned 64-bit values containing the values for the
+ PSSCR for each of the idle states in ibm,cpu-idle-state-names.
+ This property is required on POWER9 and absent on POWER8.
+
+- ibm,cpu-idle-state-psscr-mask:
+ Array of unsigned 64-bit values containing the masks
+ indicating which psscr fields are set in the corresponding
+ entries of ibm,cpu-idle-state-psscr. This property is
+ required on POWER9 and absent on POWER8.
+
+ Whenever the firmware sets an entry in
+ ibm,cpu-idle-state-psscr-mask value to 0xf, it implies that
+ only the Requested Level (RL) field of the corresponding entry
+ in ibm,cpu-idle-state-psscr should be considered by the
+ kernel. For such idle states, the kernel would set the
+ remaining fields of the psscr to the following sane-default
+ values.
+
+ - ESL and EC bits are to 1. So wakeup from any stop
+ state will be at vector 0x100.
+
+ - MTL and PSLL are set to the maximum allowed value as
+ per the ISA, i.e. 15.
+
+ - The Transition Rate, TR is set to the Maximum value
+ 3.
+
+ For all the other values of the entry in
+ ibm,cpu-idle-state-psscr-mask, the kernel expects all the
+ psscr fields of the corresponding entry in
+ ibm,cpu-idle-state-psscr to be correctly set by the firmware.
+
+- ibm,cpu-idle-state-pmicr:
+ Array of unsigned 64-bit values containing the pmicr values
+ for the idle states in ibm,cpu-idle-state-names. This 64-bit
+ register value is to be set in pmicr for the corresponding
+ state if the flag indicates that pmicr SPR should be set. This
+ is an optional property on POWER8 and is absent on
+ POWER9.
+
+- ibm,cpu-idle-state-pmicr-mask:
+ Array of unsigned 64-bit values containing the mask indicating
+ which of the fields of the PMICR are set in the corresponding
+ entries in ibm,cpu-idle-state-pmicr. This is an optional
+ property on POWER8 and is absent on POWER9.
diff --git a/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
new file mode 100644
index 000000000..6ad881cbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
@@ -0,0 +1,27 @@
+IBM OPAL Sensor Groups Binding
+-------------------------------
+
+Node: /ibm,opal/sensor-groups
+
+Description: Contains sensor groups available in the Powernv P9
+servers. Each child node indicates a sensor group.
+
+- compatible : Should be "ibm,opal-sensor-group"
+
+Each child node contains below properties:
+
+- type : String to indicate the type of sensor-group
+
+- sensor-group-id: Abstract unique identifier provided by firmware of
+ type <u32> which is used for sensor-group
+ operations like clearing the min/max history of all
+ sensors belonging to the group.
+
+- ibm,chip-id : Chip ID
+
+- sensors : Phandle array of child nodes of /ibm,opal/sensor/
+ belonging to this group
+
+- ops : Array of opal-call numbers indicating available operations on
+ sensor groups like clearing min/max, enabling/disabling sensor
+ group.
diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml
new file mode 100644
index 000000000..6494c7d08
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/powerpc/sleep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerPC sleep property
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |
+ Devices on SOCs often have mechanisms for placing devices into low-power
+ states that are decoupled from the devices' own register blocks. Sometimes,
+ this information is more complicated than a cell-index property can
+ reasonably describe. Thus, each device controlled in such a manner
+ may contain a "sleep" property which describes these connections.
+
+ The sleep property consists of one or more sleep resources, each of
+ which consists of a phandle to a sleep controller, followed by a
+ controller-specific sleep specifier of zero or more cells.
+
+ The semantics of what type of low power modes are possible are defined
+ by the sleep controller. Some examples of the types of low power modes
+ that may be supported are:
+
+ - Dynamic: The device may be disabled or enabled at any time.
+ - System Suspend: The device may request to be disabled or remain
+ awake during system suspend, but will not be disabled until then.
+ - Permanent: The device is disabled permanently (until the next hard
+ reset).
+
+ Some devices may share a clock domain with each other, such that they should
+ only be suspended when none of the devices are in use. Where reasonable,
+ such nodes should be placed on a virtual bus, where the bus has the sleep
+ property. If the clock domain is shared among devices that cannot be
+ reasonably grouped in this manner, then create a virtual sleep controller
+ (similar to an interrupt nexus, except that defining a standardized
+ sleep-map should wait until its necessity is demonstrated).
+
+select: true
+
+properties:
+ sleep:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+
+additionalProperties: true