summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/regmap
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/regmap')
-rw-r--r--Documentation/devicetree/bindings/regmap/regmap.txt29
1 files changed, 29 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
new file mode 100644
index 000000000..873096be0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -0,0 +1,29 @@
+Devicetree binding for regmap
+
+Optional properties:
+
+ little-endian,
+ big-endian,
+ native-endian: See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianness
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
+
+Examples:
+Scenario 1 : a register set in big-endian mode.
+dev: dev@40031000 {
+ compatible = "syscon";
+ reg = <0x40031000 0x1000>;
+ big-endian;
+ ...
+};