diff options
Diffstat (limited to '')
95 files changed, 8449 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/88pg86x.txt b/Documentation/devicetree/bindings/regulator/88pg86x.txt new file mode 100644 index 000000000..13b7f49a2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pg86x.txt @@ -0,0 +1,22 @@ +Marvell 88PG867/88PG868 voltage regulators + +Required properties: +- compatible: one of "marvell,88pg867", "marvell,88pg868"; +- reg: I2C slave address. + +Optional subnodes for regulators: "buck1", "buck2", using common regulator +bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>. + +Example: + + pg868@19 { + compatible = "marvell,88pg868"; + reg = <0x19>; + + vcpu: buck1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1350000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt new file mode 100644 index 000000000..e8a54c2a5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm800.txt @@ -0,0 +1,38 @@ +Marvell 88PM800 regulator + +Required properties: +- compatible: "marvell,88pm800" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +The valid names for regulators are: + + buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, + ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19 + +Example: + + pmic: 88pm800@31 { + compatible = "marvell,88pm800"; + reg = <0x31>; + + regulators { + buck1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <15000000>; + regulator-boot-on; + regulator-always-on; + }; +... + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt new file mode 100644 index 000000000..1267b3e1a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt @@ -0,0 +1,30 @@ +Marvell 88PM860x regulator + +Required properties: +- compatible: "marvell,88pm860x" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt new file mode 100644 index 000000000..b9f58e480 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -0,0 +1,117 @@ +ACT88xx regulators +------------------- + +Required properties: +- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" +- reg: I2C slave address + +Optional properties: +- system-power-controller: Telling whether or not this pmic is controlling + the system power. See Documentation/devicetree/bindings/power/power-controller.txt . +- active-semi,vsel-high: Indicates the VSEL pin is high. + If this property is missing, assume the VSEL pin is low(0). + +Optional input supply properties: +- for act8600: + - vp1-supply: The input supply for DCDC_REG1 + - vp2-supply: The input supply for DCDC_REG2 + - vp3-supply: The input supply for DCDC_REG3 + - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 + SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. +- for act8846: + - vp1-supply: The input supply for REG1 + - vp2-supply: The input supply for REG2 + - vp3-supply: The input supply for REG3 + - vp4-supply: The input supply for REG4 + - inl1-supply: The input supply for REG5, REG6 and REG7 + - inl2-supply: The input supply for REG8 and LDO_REG9 + - inl3-supply: The input supply for REG10, REG11 and REG12 +- for act8865: + - vp1-supply: The input supply for DCDC_REG1 + - vp2-supply: The input supply for DCDC_REG2 + - vp3-supply: The input supply for DCDC_REG3 + - inl45-supply: The input supply for LDO_REG1 and LDO_REG2 + - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 + +Any standard regulator properties can be used to configure the single regulator. +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified +for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h +file. + +The valid names for regulators are: + - for act8846: + REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 + - for act8865: + DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. + - for act8600: + DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, + LDO_REG8, LDO_REG9, LDO_REG10, + +Example: +-------- + +#include <dt-bindings/regulator/active-semi,8865-regulator.h> + + i2c1: i2c@f0018000 { + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + + regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>, + <ACT8865_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1150000>; + regulator-suspend-max-microvolt = <1150000>; + regulator-changeable-in-suspend; + regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>; + }; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddana_reg: LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>, + <ACT8865_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddfuse_reg: LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt new file mode 100644 index 000000000..401752761 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -0,0 +1,113 @@ +Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device + +Required properties: + - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt. + +Optional properties: +- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high. + If this property is missing, assume the VSEL pin is set to logic-low. + +Optional input supply properties: + - vp1-supply: The input supply for REG_DCDC1 + - vp2-supply: The input supply for REG_DCDC2 + - vp3-supply: The input supply for REG_DCDC3 + - inl45-supply: The input supply for REG_LDO1 and REG_LDO2 + - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 + +Any standard regulator properties can be used to configure the single regulator. +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be +specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h +file. + +The valid names for regulators are: + REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. + +Example: + +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> + + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + + active-semi,vsel-high; + + regulators { + vdd_1v35_reg: REG_DCDC1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt=<1400000>; + regulator-suspend-max-microvolt=<1400000>; + regulator-changeable-in-suspend; + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + }; + }; + + vdd_1v2_reg: REG_DCDC2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_3v3_reg: REG_DCDC3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: REG_LDO1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_3v3_lp_reg: REG_LDO2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: REG_LDO3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: REG_LDO4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml new file mode 100644 index 000000000..e7b3abe30 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Anatop Voltage Regulators + +maintainers: + - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: fsl,anatop-regulator + + regulator-name: true + + anatop-reg-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the anatop MFD register offset. + + anatop-vol-bit-shift: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the bit shift for the register. + + anatop-vol-bit-width: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the number of bits used in the register. + + anatop-min-bit-val: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the minimum value of this register. + + anatop-min-voltage: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the minimum voltage of this regulator. + + anatop-max-voltage: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the maximum voltage of this regulator. + + anatop-delay-reg-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the anatop MFD step time register offset. + + anatop-delay-bit-shift: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the bit shift for the step time register. + + anatop-delay-bit-width: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the number of bits used in the step time register. + + anatop-enable-bit: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing regulator enable bit offset. + + vin-supply: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: input supply phandle. + +required: + - compatible + - regulator-name + - anatop-reg-offset + - anatop-vol-bit-shift + - anatop-vol-bit-width + - anatop-min-bit-val + - anatop-min-voltage + - anatop-max-voltage + +unevaluatedProperties: false + +examples: + - | + regulator-vddpu { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1300000>; + }; diff --git a/Documentation/devicetree/bindings/regulator/as3722-regulator.txt b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt new file mode 100644 index 000000000..caad0c8a2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt @@ -0,0 +1,91 @@ +Regulator of AMS AS3722 PMIC. +Name of the regulator subnode must be "regulators". + +Optional properties: +-------------------- +The input supply of regulators are the optional properties on the +regulator node. The AS3722 is having 7 DCDC step-down regulators as +sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these +regulators are provided through following properties: +vsup-sd2-supply: Input supply for SD2. +vsup-sd3-supply: Input supply for SD3. +vsup-sd4-supply: Input supply for SD4. +vsup-sd5-supply: Input supply for SD5. +vin-ldo0-supply: Input supply for LDO0. +vin-ldo1-6-supply: Input supply for LDO1 and LDO6. +vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7. +vin-ldo3-4-supply: Input supply for LDO3 and LDO4. +vin-ldo9-10-supply: Input supply for LDO9 and LDO10. +vin-ldo11-supply: Input supply for LDO11. + +Optional nodes: +-------------- +- regulators : Must contain a sub-node per regulator from the list below. + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a + description of standard properties for these sub-nodes. + Additional custom properties are listed below. + sd[0-6], ldo[0-7], ldo[9-11]. + + Optional sub-node properties: + ---------------------------- + ams,ext-control: External control of the rail. The option of + this properties will tell which external input is + controlling this rail. Valid values are 0, 1, 2 ad 3. + 0: There is no external control of this rail. + 1: Rail is controlled by ENABLE1 input pin. + 2: Rail is controlled by ENABLE2 input pin. + 3: Rail is controlled by ENABLE3 input pin. + ams,enable-tracking: Enable tracking with SD1, only supported + by LDO3. + +Example: +------- + ams3722: ams3722 { + compatible = "ams,as3722"; + reg = <0x40>; + ... + + regulators { + vsup-sd2-supply = <...>; + ... + + sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <1>; + }; + + sd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + sd4 { + regulator-name = "avdd-hdmi-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + sd5 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + .... + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt new file mode 100644 index 000000000..36f5e2f5c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt @@ -0,0 +1,35 @@ +Motorola CPCAP PMIC voltage regulators +------------------------------------ + +Requires node properties: +- "compatible" value one of: + "motorola,cpcap-regulator" + "motorola,mapphone-cpcap-regulator" + "motorola,xoom-cpcap-regulator" + +Required regulator properties: +- "regulator-name" +- "regulator-enable-ramp-delay" +- "regulator-min-microvolt" +- "regulator-max-microvolt" + +Optional regulator properties: +- "regulator-boot-on" + +See Documentation/devicetree/bindings/regulator/regulator.txt +for more details about the regulator properties. + +Example: + +cpcap_regulator: regulator { + compatible = "motorola,cpcap-regulator"; + + cpcap_regulators: regulators { + sw5: SW5 { + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + regulator-enable-ramp-delay = <50000>; + regulator-boot-on; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt new file mode 100644 index 000000000..58065ca9e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/da9210.txt @@ -0,0 +1,29 @@ +* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter + +Required properties: + +- compatible: must be "dlg,da9210" +- reg: the i2c slave address of the regulator. It should be 0x68. + +Optional properties: + +- interrupts: a reference to the DA9210 interrupt, if available. + +Any standard regulator properties can be used to configure the single da9210 +DCDC. + +Example: + + da9210@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + + interrupt-parent = <...>; + interrupts = <...>; + + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <1600000>; + regulator-max-microamp = <4600000>; + regulator-boot-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt new file mode 100644 index 000000000..eb871447d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/da9211.txt @@ -0,0 +1,205 @@ +* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 + Voltage Regulator + +Required properties: +- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" + or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" +- reg: I2C slave address, usually 0x68. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCKA and BUCKB. + +Optional properties: +- enable-gpios: platform gpio for control of BUCKA/BUCKB. +- Any optional property defined in regulator.txt + - regulator-initial-mode and regulator-allowed-modes may be specified using + mode values from dt-bindings/regulator/dlg,da9211-regulator.h + +Example 1) DA9211 + pmic: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; + regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC + DA9211_BUCK_MODE_AUTO>; + }; + }; + }; + +Example 2) DA9212 + pmic: da9212@68 { + compatible = "dlg,da9212"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 3) DA9213 + pmic: da9213@68 { + compatible = "dlg,da9213"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + }; + }; + +Example 4) DA9223 + pmic: da9223@68 { + compatible = "dlg,da9223"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + }; + }; + +Example 5) DA9214 + pmic: da9214@68 { + compatible = "dlg,da9214"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 6) DA9224 + pmic: da9224@68 { + compatible = "dlg,da9224"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 7) DA9215 + pmic: da9215@68 { + compatible = "dlg,da9215"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 8) DA9225 + pmic: da9225@68 { + compatible = "dlg,da9225"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt new file mode 100644 index 000000000..e7fc04528 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fan53555.txt @@ -0,0 +1,24 @@ +Binding for Fairchild FAN53555 regulators + +Required properties: + - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or + "silergy,syr828" + - reg: I2C address + +Optional properties: + - fcs,suspend-voltage-selector: declare which of the two available + voltage selector registers should be used for the suspend + voltage. The other one is used for the runtime voltage setting + Possible values are either <0> or <1> + - vin-supply: regulator supplying the vin pin + +Example: + + regulator@40 { + compatible = "fcs,fan53555"; + regulator-name = "fan53555"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&parent_reg>; + fcs,suspend-voltage-selector = <1>; + }; diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml new file mode 100644 index 000000000..92211f2b3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed Voltage regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.yaml, can also be used. However a fixed voltage regulator is + expected to have the regulator-min-microvolt and regulator-max-microvolt + to be the same. + +allOf: + - $ref: "regulator.yaml#" + +if: + properties: + compatible: + contains: + const: regulator-fixed-clock + required: + - clocks + +properties: + compatible: + enum: + - regulator-fixed + - regulator-fixed-clock + + regulator-name: true + + gpio: + description: gpio to use for enable control + maxItems: 1 + + clocks: + description: + clock to use for enable control. This binding is only available if + the compatible is chosen to regulator-fixed-clock. The clock binding + is mandatory if compatible is chosen to regulator-fixed-clock. + maxItems: 1 + + startup-delay-us: + description: startup time in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + off-on-delay-us: + description: off delay time in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + enable-active-high: + description: + Polarity of GPIO is Active high. If this property is missing, + the default assumed is Active low. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + vin-supply: + description: Input supply phandle. + +required: + - compatible + - regulator-name + +unevaluatedProperties: false + +examples: + - | + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 0>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + gpio-open-drain; + vin-supply = <&parent_reg>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml new file mode 100644 index 000000000..69e5402da --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/google,cros-ec-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC controlled voltage regulators + +maintainers: + - Pi-Hsun Shih <pihsun@chromium.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.yaml, can also be used. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: google,cros-ec-regulator + + reg: + maxItems: 1 + description: Identifier for the voltage regulator to ChromeOS EC. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + regulator@0 { + compatible = "google,cros-ec-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + reg = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml new file mode 100644 index 000000000..f7e3d8fd3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.txt, can also be used. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: regulator-gpio + + regulator-name: true + + enable-gpios: + description: GPIO to use to enable/disable the regulator. + Warning, the GPIO phandle flags are ignored and the GPIO polarity is + controlled solely by the presence of "enable-active-high" DT property. + This is due to compatibility with old DTs. + maxItems: 1 + + gpios: + description: Array of one or more GPIO pins used to select the regulator + voltage/current listed in "states". + minItems: 1 + maxItems: 8 # Should be enough... + + gpios-states: + description: | + On operating systems, that don't support reading back gpio values in + output mode (most notably linux), this array provides the state of GPIO + pins set when requesting them from the gpio controller. Systems, that are + capable of preserving state when requesting the lines, are free to ignore + this property. + 0: LOW + 1: HIGH + Default is LOW if nothing else is specified. + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0 + + states: + description: Selection of available voltages/currents provided by this + regulator and matching GPIO configurations to achieve them. If there are + no states in the "states" array, use a fixed regulator instead. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value + + startup-delay-us: + description: startup time in microseconds + + enable-active-high: + description: Polarity of "enable-gpio" GPIO is active HIGH. Default is + active LOW. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + regulator-type: + description: Specifies what is being regulated. + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage + +required: + - compatible + - regulator-name + - gpios + - states + +unevaluatedProperties: false + +examples: + - | + gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "mmci-gpio-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-boot-on; + + enable-gpios = <&gpio0 23 0x4>; + gpios = <&gpio0 24 0x4 + &gpio0 25 0x4>; + states = <1800000 0x3>, + <2200000 0x2>, + <2600000 0x1>, + <2900000 0x0>; + + startup-delay-us = <100000>; + enable-active-high; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt new file mode 100644 index 000000000..14cfdc564 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt @@ -0,0 +1,29 @@ +Hisilicon Hi655x Voltage regulators + +Note: +The Hi655x regulator control is managed by Hi655x PMIC. +So the node of this regulator must be child node of Hi655x +PMIC node. + +The driver uses the regulator core framework, so please also +take the bindings of regulator.txt for reference. + +The valid names for regulators are: + +LDO2_2V8 LDO7_SDIO LDO10_2V85 LDO13_1V8 LDO14_2V8 +LDO15_1V8 LDO17_2V5 LDO19_3V0 LDO21_1V8 LDO22_1V2 + +Example: + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + ... + regulators { + ldo2: LDO2@a21 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + ... + } + } diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt new file mode 100644 index 000000000..d6e7c9ec9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/isl9305.txt @@ -0,0 +1,36 @@ +Intersil ISL9305/ISL9305H voltage regulator + +Required properties: + +- compatible: "isil,isl9305" or "isil,isl9305h" +- reg: I2C slave address, usually 0x68. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node + is defined by the standard binding for regulators; see regulator.txt. +- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. + VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. + VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. + VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. + +Optional properties: +- Per-regulator optional properties are defined in regulator.txt + +Example + + pmic: isl9305@68 { + compatible = "isil,isl9305"; + reg = <0x68>; + + VINDCD1-supply = <&system_power>; + VINDCD2-supply = <&system_power>; + VINLDO1-supply = <&system_power>; + VINLDO2-supply = <&system_power>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt new file mode 100644 index 000000000..cc5a6151d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt @@ -0,0 +1,108 @@ +TI LMU LM363x regulator device tree bindings + +LM363x regulator driver supports LM3631 and LM3632. +LM3631 has five regulators and LM3632 supports three regulators. + +Required property: + - compatible: "ti,lm363x-regulator" + +Optional properties: + LM3632 has external enable pins for two LDOs. + - enable-gpios: Two GPIO specifiers for Vpos and Vneg control pins. + The first entry is Vpos, the second is Vneg enable pin. + +Child nodes: + LM3631 + - vboost + - vcont + - voref + - vpos + - vneg + + LM3632 + - vboost + - vpos + - vneg + + Optional properties of a child node: + Each sub-node should contain the constraints and initialization. + Please refer to [1]. + +Examples: Please refer to ti-lmu dt-bindings [2]. + +lm3631@29 { + compatible = "ti,lm3631"; + reg = <0x29>; + + regulators { + compatible = "ti,lm363x-regulator"; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <6350000>; + regulator-always-on; + }; + + vcont { + regulator-name = "lcd_vcont"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + voref { + regulator-name = "lcd_voref"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + }; +}; + +lm3632@11 { + compatible = "ti,lm3632"; + reg = <0x11>; + + regulators { + compatible = "ti,lm363x-regulator"; + + /* GPIO1_16 for Vpos, GPIO1_28 is for Vneg */ + enable-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>, + <&gpio1 28 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <6400000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + }; + }; +}; + +[1] ../regulator/regulator.txt +[2] ../mfd/ti-lmu.txt diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt new file mode 100644 index 000000000..ab895cd1c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -0,0 +1,161 @@ +Binding for TI/National Semiconductor LP872x Driver + +Required properties: + - compatible: "ti,lp8720" or "ti,lp8725" + - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725 + +Optional properties: + - ti,general-config: the value of LP872X_GENERAL_CFG register (u8) + (LP8720) + bit[2]: BUCK output voltage control by external DVS pin or register + 1 = external pin, 0 = bit7 of register 08h + bit[1]: sleep control by external DVS pin or register + 1 = external pin, 0 = bit6 of register 08h + bit[0]: time step unit(usec). 1 = 25, 0 = 50 + + (LP8725) + bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256 + bit[4]: BUCK2 enable control. 1 = enable, 0 = disable + bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh + bit[2]: BUCK1 output voltage control by external DVS pin or register + 1 = register 08h, 0 = DVS + bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal + bit[0]: BUCK1 enable control, 1 = enable, 0 = disable + + For more details, please see the datasheet. + + - ti,update-config: define it when LP872X_GENERAL_CFG register should be set + - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. + - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. + - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. + + Sub nodes for regulator_init_data + LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) + LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2) + For more details, please see the following binding document. + (Documentation/devicetree/bindings/regulator/regulator.txt) + +Datasheet + - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf + - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf + +Example 1) LP8720 + +lp8720@7d { + compatible = "ti,lp8720"; + reg = <0x7d>; + + /* external DVS pin used, timestep is 25usec */ + ti,general-config = /bits/ 8 <0x03>; + ti,update-config; + + /* + * The dvs-gpio depends on the processor environment. + * For example, following GPIO specifier means GPIO134 in OMAP4. + */ + ti,dvs-gpio = <&gpio5 6 0>; + ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */ + ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */ + + vaf: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vmmc: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam_io: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcam_core: ldo4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2850000>; + regulator-boot-on; + }; + + vcam: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcc: buck { + regulator-name = "VBUCK"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2300000>; + }; +}; + +Example 2) LP8725 + +lp8725@7a { + compatible = "ti,lp8725"; + reg = <0x7a>; + + /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */ + ti,general-config = /bits/ 8 <0xdd>; + ti,update-config; + + vcam_io: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam_core: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcmmb_io: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcmmb_core: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vaux1: lilo1 { + regulator-name = "VAUX1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + vaux2: lilo2 { + regulator-name = "VAUX2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + vcc1: buck1 { + regulator-name = "VBUCK1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <1370000>; + regulator-boot-on; + }; + + vcc2: buck2 { + regulator-name = "VBUCK2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <1370000>; + regulator-boot-on; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/ltc3589.txt b/Documentation/devicetree/bindings/regulator/ltc3589.txt new file mode 100644 index 000000000..801053036 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3589.txt @@ -0,0 +1,99 @@ +Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators + +Required properties: +- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3, ldo4): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from +0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between +0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1 +have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3 +regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 +regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V +and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not +be disabled and thus should have the regulator-always-on property set. + +Example: + + ltc3589: pmic@34 { + compatible = "lltc,ltc3589-1"; + reg = <0x34>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <591930>; + regulator-max-microvolt = <1224671>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456803>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1341250>; + regulator-max-microvolt = <2775000>; + lltc,fb-voltage-divider = <270000 100000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + bb_out_reg: bb-out { + regulator-min-microvolt = <3387341>; + regulator-max-microvolt = <3387341>; + lltc,fb-voltage-divider = <511000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1306329>; + regulator-max-microvolt = <1306329>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456806>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3200000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/ltc3676.txt b/Documentation/devicetree/bindings/regulator/ltc3676.txt new file mode 100644 index 000000000..d4eb366ce --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3676.txt @@ -0,0 +1,94 @@ +Linear Technology LTC3676 8-output regulators + +Required properties: +- compatible: "lltc,ltc3676" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from: +412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between +0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V. + +Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output +0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby +regulator can not be disabled and thus should have the regulator-always-on +property set. + +Example: + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <200400>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <130800>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <168400>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max1586-regulator.txt b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt new file mode 100644 index 000000000..c050c1744 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt @@ -0,0 +1,28 @@ +Maxim MAX1586 voltage regulator + +Required properties: +- compatible: must be "maxim,max1586" +- reg: I2C slave address, usually 0x14 +- v3-gain: integer specifying the V3 gain as per datasheet + (1 + R24/R25 + R24/185.5kOhm) +- any required generic properties defined in regulator.txt + +Example: + + i2c_master { + max1586@14 { + compatible = "maxim,max1586"; + reg = <0x14>; + v3-gain = <1000000>; + + regulators { + vcc_core: v3 { + regulator-name = "vcc_core"; + regulator-compatible = "Output_V3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1705000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml new file mode 100644 index 000000000..ce0a4021a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator driver for MAX77650 PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: | + This module is part of the MAX77650 MFD device. For more details + see Documentation/devicetree/bindings/mfd/max77650.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The device has a single LDO regulator and a SIMO buck-boost regulator with + three independent power rails. + +properties: + compatible: + const: maxim,max77650-regulator + +patternProperties: + "^regulator-(ldo|sbb[0-2])$": + $ref: "regulator.yaml#" + +required: + - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt new file mode 100644 index 000000000..e9f7578ca --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max77686.txt @@ -0,0 +1,71 @@ +Binding for Maxim MAX77686 regulators + +This is a part of the device tree bindings of MAX77686 multi-function device. +More information can be found in ../mfd/max77686.txt file. + +The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO) +regulators that can be controlled over I2C. + +Following properties should be present in main device node of the MFD chip. + +Optional node: +- voltage-regulators : The regulators of max77686 have to be instantiated + under subnode named "voltage-regulators" using the following format. + + regulator_name { + regulator-compatible = LDOn/BUCKn + standard regulator constraints.... + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + + The regulator node's name should be initialized with a string +to get matched with their hardware counterparts as follow: + + -LDOn : for LDOs, where n can lie in range 1 to 26. + example: LDO1, LDO2, LDO26. + -BUCKn : for BUCKs, where n can lie in range 1 to 9. + example: BUCK1, BUCK5, BUCK9. + + Regulators which can be turned off during system suspend: + -LDOn : 2, 6-8, 10-12, 14-16, + -BUCKn : 1-4. + Use standard regulator bindings for it ('regulator-off-in-suspend'). + + LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable + control. To turn this feature on this property must be added to the regulator + sub-node: + - maxim,ena-gpios : one GPIO specifier enable control (the gpio + flags are actually ignored and always + ACTIVE_HIGH is used) + +Example: + + max77686: pmic@9 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 IRQ_TYPE_NONE>; + reg = <0x09>; + + voltage-regulators { + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt new file mode 100644 index 000000000..b82943d83 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -0,0 +1,111 @@ +Binding for Maxim MAX77802 regulators + +This is a part of device tree bindings of MAX77802 multi-function device. +More information can be found in bindings/mfd/max77802.txt file. + +The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) +regulators that can be controlled over I2C. + +Following properties should be present in main device node of the MFD chip. + +Optional properties: +- inb1-supply: The input supply for BUCK1 +- inb2-supply: The input supply for BUCK2 +- inb3-supply: The input supply for BUCK3 +- inb4-supply: The input supply for BUCK4 +- inb5-supply: The input supply for BUCK5 +- inb6-supply: The input supply for BUCK6 +- inb7-supply: The input supply for BUCK7 +- inb8-supply: The input supply for BUCK8 +- inb9-supply: The input supply for BUCK9 +- inb10-supply: The input supply for BUCK10 +- inl1-supply: The input supply for LDO8 and LDO15 +- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35 +- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7 +- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14 +- inl5-supply: The input supply for LDO9 and LDO19 +- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33 +- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29 +- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34 +- inl10-supply: The input supply for LDO1 and LDO2 + +Optional nodes: +- regulators : The regulators of max77802 have to be instantiated + under subnode named "regulators" using the following format. + + regulator-name { + standard regulator constraints.... + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + +The regulator node name should be initialized with a string to get matched +with their hardware counterparts as follow. The valid names are: + + -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30 + and 32-35. + example: LDO1, LDO2, LDO35. + -BUCKn : for BUCKs, where n can lie in range 1 to 10. + example: BUCK1, BUCK5, BUCK10. + +The max77802 regulator supports two different operating modes: Normal and Low +Power Mode. Some regulators support the modes to be changed at startup or by +the consumers during normal operation while others only support to change the +mode during system suspend. The standard regulator suspend states binding can +be used to configure the regulator operating mode. + +The regulators that support the standard "regulator-initial-mode" property, +changing their mode during normal operation are: LDOs 1, 3, 20 and 21. + +The possible values for "regulator-initial-mode" and "regulator-mode" are: + 1: Normal regulator voltage output mode. + 3: Low Power which reduces the quiescent current down to only 1uA + +The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h +header and can be included by device tree source files. + +The standard "regulator-mode" property can only be used for regulators that +support changing their mode to Low Power Mode during suspend. These regulators +are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has +been enabled for the given suspend state using "regulator-on-in-suspend" and +has not been disabled for that state using "regulator-off-in-suspend". + +Example: + + max77802@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #address-cells = <1>; + #size-cells = <0>; + + inb1-supply = <&parent_reg>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = <MAX77802_OPMODE_LP>; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml new file mode 100644 index 000000000..9c038698f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8660.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8660 voltage regulator + +maintainers: + - Daniel Mack <zonque@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max8660 + - maxim,max8661 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "regulator-.+": + $ref: "regulator.yaml#" + + additionalProperties: false + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-V3 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V4 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V5 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + regulator-V6 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-V7 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt new file mode 100644 index 000000000..371eccd1c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -0,0 +1,69 @@ +MAX8907 regulator + +Required properties: +- compatible: "maxim,max8907" +- reg: I2C slave address +- interrupts: The interrupt output of the controller +- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC. +- in-v1-supply: The input supply for SD1. +- in-v2-supply: The input supply for SD2. +- in-v3-supply: The input supply for SD3. +- in1-supply: The input supply for LDO1. +... +- in20-supply: The input supply for LDO20. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + +The valid names for regulators are: + + sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, + ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, + out33v, bbat, sdby, vrtc. + +Example: + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&some_reg>; + in-v1-supply = <&mbatt_reg>; + ... + in1-supply = <&mbatt_reg>; + ... + + regulators { + mbatt_reg: mbatt { + regulator-name = "vbat_pmu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sd1 { + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sd2 { + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; +... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8925-regulator.txt b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt new file mode 100644 index 000000000..0057695aa --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt @@ -0,0 +1,40 @@ +Max8925 Voltage regulators + +Required nodes: +-nodes: + - SDV1 for SDV SDV1 + - SDV2 for SDV SDV2 + - SDV3 for SDV SDV3 + - LDO1 for LDO LDO1 + - LDO2 for LDO LDO2 + - LDO3 for LDO LDO3 + - LDO4 for LDO LDO4 + - LDO5 for LDO LDO5 + - LDO6 for LDO LDO6 + - LDO7 for LDO LDO7 + - LDO8 for LDO LDO8 + - LDO9 for LDO LDO9 + - LDO10 for LDO LDO10 + - LDO11 for LDO LDO11 + - LDO12 for LDO LDO12 + - LDO13 for LDO LDO13 + - LDO14 for LDO LDO14 + - LDO15 for LDO LDO15 + - LDO16 for LDO LDO16 + - LDO17 for LDO LDO17 + - LDO18 for LDO LDO18 + - LDO19 for LDO LDO19 + - LDO20 for LDO LDO20 + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt new file mode 100644 index 000000000..866fcdd0f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8952.txt @@ -0,0 +1,52 @@ +Maxim MAX8952 voltage regulator + +Required properties: +- compatible: must be equal to "maxim,max8952" +- reg: I2C slave address, usually 0x60 +- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages + in microvolts. All values must be from range <770000, 1400000> +- any required generic properties defined in regulator.txt + +Optional properties: +- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection +- max8952,en-gpio: GPIO used to control enable status of regulator +- max8952,default-mode: index of default DVS voltage, from <0, 3> range +- max8952,sync-freq: sync frequency, must be one of following values: + - 0: 26 MHz + - 1: 13 MHz + - 2: 19.2 MHz + Defaults to 26 MHz if not specified. +- max8952,ramp-speed: voltage ramp speed, must be one of following values: + - 0: 32mV/us + - 1: 16mV/us + - 2: 8mV/us + - 3: 4mV/us + - 4: 2mV/us + - 5: 1mV/us + - 6: 0.5mV/us + - 7: 0.25mV/us + Defaults to 32mV/us if not specified. +- any available generic properties defined in regulator.txt + +Example: + + vdd_arm_reg: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + /* max8952-specific properties */ + max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,en-gpio = <&gpx0 1 0>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + /* generic regulator properties */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt new file mode 100644 index 000000000..c2c68fcc1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt @@ -0,0 +1,52 @@ +* Maxim MAX8973 Voltage Regulator + +Required properties: + +- compatible: must be one of following: + "maxim,max8973" + "maxim,max77621". +- reg: the i2c slave address of the regulator. It should be 0x1b. + +Any standard regulator properties can be used to configure the single max8973 +DCDC. + +Optional properties: + +-maxim,externally-enable: boolean, externally control the regulator output + enable/disable. +-maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided + then externally enable control will be considered. +-maxim,dvs-gpio: GPIO which is connected to DVS pin of device. +-maxim,dvs-default-state: Default state of GPIO during initialisation. + 1 for HIGH and 0 for LOW. +-maxim,enable-remote-sense: boolean, enable reote sense. +-maxim,enable-falling-slew-rate: boolean, enable falling slew rate. +-maxim,enable-active-discharge: boolean: enable active discharge. +-maxim,enable-frequency-shift: boolean, enable 9% frequency shift. +-maxim,enable-bias-control: boolean, enable bias control. By enabling this + startup delay can be reduce to 20us from 220us. +-maxim,enable-etr: boolean, enable Enhanced Transient Response. +-maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response + circuit is enabled and set for high sensitivity. If this + property is available then etr will be enable default. + +Enhanced transient response (ETR) will affect the configuration of CKADV. + +-junction-warn-millicelsius: u32, junction warning temperature threshold + in millicelsius. If die temperature crosses this level then + device generates the warning interrupts. + +Please note that thermal functionality is only supported on MAX77621. The +supported threshold warning temperature for MAX77621 are 120 degC and 140 degC. + +Example: + + max8973@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt new file mode 100644 index 000000000..6fe825b8a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -0,0 +1,144 @@ +* Maxim MAX8997 Voltage and Current Regulator + +The Maxim MAX8997 is a multi-function device which includes voltage and +current regulators, rtc, charger controller and other sub-blocks. It is +interfaced to the host controller using a i2c interface. Each sub-block is +addressed by the host system using different i2c slave address. This document +describes the bindings for 'pmic' sub-block of max8997. + +Required properties: +- compatible: Should be "maxim,max8997-pmic". +- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. + +- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck1 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck5 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional + property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage' + property should specify atleast one voltage level (which would be a + safe operating voltage). + + If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional + property is specified, then all the eight voltage values for the + 'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified. + +Optional properties: +- interrupts: Interrupt specifiers for two interrupt sources. + - First interrupt specifier is for 'irq1' interrupt. + - Second interrupt specifier is for 'alert' interrupt. +- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs. +- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. +- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: +- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for + multiple bucks, changing the voltage value of one of the bucks may affect + that of another buck, which is the side effect of the change (set_voltage). + Use this property to ignore such side effects and change the voltage. + +- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + +- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + +Regulators: The regulators of max8997 that have to be instantiated should be +included in a sub-node named 'regulators'. Regulator nodes included in this +sub-node should be of the format as listed below. + + regulator_name { + standard regulator bindings here + }; + +The following are the names of the regulators that the max8997 pmic block +supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of max8997. + + - LDOn + - valid values for n are 1 to 18 and 21 + - Example: LDO0, LD01, LDO2, LDO21 + - BUCKn + - valid values for n are 1 to 7. + - Example: BUCK1, BUCK2, BUCK3, BUCK7 + + - ENVICHG: Battery Charging Current Monitor Output. This is a fixed + voltage type regulator + + - ESAFEOUT1: (ldo19) + - ESAFEOUT2: (ld020) + + - CHARGER_CV: main battery charger voltage control + - CHARGER: main battery charger current control + - CHARGER_TOPOFF: end of charge current threshold level + +The bindings inside the regulator nodes use the standard regulator bindings +which are documented elsewhere. + +Example: + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + interrupt-parent = <&wakeup_eint>; + reg = <0x66>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ + <&gpx0 1 1 0 0>, /* SET2 */ + <&gpx0 2 1 0 0>; /* SET3 */ + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml new file mode 100644 index 000000000..78c0b6324 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77826 PMIC + +maintainers: + - Iskren Chernev <iskren.chernev@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max77826 + + reg: + maxItems: 1 + + regulators: + type: object + $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST + + patternProperties: + "^LDO([1-9]|1[0-5])$": + type: object + $ref: regulator.yaml# + + "^BUCK|BUCKBOOST$": + type: object + $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "maxim,max77826"; + reg = <0x69>; + + regulators { + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt new file mode 100644 index 000000000..b8f843fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -0,0 +1,143 @@ +MCP16502 PMIC + +Required properties: +- compatible: "microchip,mcp16502" +- reg: I2C slave address +- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. +- regulators: A node that houses a sub-node for each regulator within + the device. Each sub-node is identified using the node's + name. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Regualtors of MCP16502 PMIC: +1) VDD_IO - Buck (1.2 - 3.7 V) +2) VDD_DDR - Buck (0.6 - 1.85 V) +3) VDD_CORE - Buck (0.6 - 1.85 V) +4) VDD_OTHER - BUCK (0.6 - 1.85 V) +5) LDO1 - LDO (1.2 - 3.7 V) +6) LDO2 - LDO (1.2 - 3.7 V) + +Regulator modes: +2 - FPWM: higher precision, higher consumption +4 - AutoPFM: lower precision, lower consumption + +Each regulator is defined using the standard binding for regulators. + +Example: + +mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/mp8859.txt b/Documentation/devicetree/bindings/regulator/mp8859.txt new file mode 100644 index 000000000..74ad69730 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mp8859.txt @@ -0,0 +1,22 @@ +Monolithic Power Systems MP8859 voltage regulator + +Required properties: +- compatible: "mps,mp8859"; +- reg: I2C slave address. + +Optional subnode for regulator: "mp8859_dcdc", using common regulator +bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>. + +Example: + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml new file mode 100644 index 000000000..90727fdc1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MP5416 PMIC + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +properties: + $nodename: + pattern: "^pmic@[0-9a-f]{1,2}$" + compatible: + enum: + - mps,mp5416 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4] and LDO[1-4] + + patternProperties: + "^buck[1-4]$": + $ref: "regulator.yaml#" + type: object + + "^ldo[1-4]$": + $ref: "regulator.yaml#" + type: object + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mp5416"; + reg = <0x69>; + + regulators { + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3975000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml new file mode 100644 index 000000000..9245b7199 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power Systems MP8867/MP8869 voltage regulator + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - mps,mp8867 + - mps,mp8869 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + mps,fb-voltage-divider: + description: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + maxItems: 2 + + mps,switch-frequency-hz: + description: The valid switch frequency in Hertz. + enum: [500000, 750000, 1000000, 1250000, 1500000] + +required: + - compatible + - reg + - enable-gpios + - mps,fb-voltage-divider + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml new file mode 100644 index 000000000..12b896361 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power System MPQ7920 PMIC + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - mps,mpq7920 + + reg: + maxItems: 1 + + regulators: + type: object + $ref: regulator.yaml# + + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] + + properties: + mps,switch-freq: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + default: 2 + description: | + switching frequency must be one of following corresponding value + 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + + "^ldortc$": + type: object + $ref: regulator.yaml# + + "^buck[1-4]$": + type: object + $ref: regulator.yaml# + + properties: + mps,buck-softstart: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + description: | + defines the soft start time of this buck, must be one of the following + corresponding values 150us, 300us, 610us, 920us + + mps,buck-phase-delay: + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] + description: | + defines the phase delay of this buck, must be one of the following + corresponding values 0deg, 90deg, 180deg, 270deg + + mps,buck-ovp-disable: + type: boolean + description: | + disables over voltage protection of this buck + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "mps,mpq7920"; + reg = <0x69>; + + regulators { + mps,switch-freq = /bits/ 8 <1>; + + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <3587500>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <7600000>; + regulator-boot-on; + mps,buck-ovp-disable; + mps,buck-phase-delay = /bits/ 8 <2>; + mps,buck-softstart = /bits/ 8 <1>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt new file mode 100644 index 000000000..84d544d8c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt @@ -0,0 +1,35 @@ +Mediatek MT6311 Regulator + +Required properties: +- compatible: "mediatek,mt6311-regulator" +- reg: I2C slave address, usually 0x6b. +- regulators: List of regulators provided by this controller. It is named + to VDVFS and VBIASN. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + VDVFS +LDO: + VBIASN + +Example: + mt6311: pmic@6b { + compatible = "mediatek,mt6311-regulator"; + reg = <0x6b>; + + regulators { + mt6311_vcpu_reg: VDVFS { + regulator-name = "VDVFS"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <10000>; + }; + mt6311_ldo_reg: VBIASN { + regulator-name = "VBIASN"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <800000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 000000000..a48749db4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,237 @@ +Mediatek MT6323 Regulator + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +PMIC's node. Each regulator is named according to its regulator type, +buck_<name> and ldo_<name>. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + mt6323regulator: regulators { + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt new file mode 100644 index 000000000..9a90a92f2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt @@ -0,0 +1,358 @@ +MediaTek MT6358 Regulator + +All voltage regulators provided by the MT6358 PMIC are described as the +subnodes of the MT6358 regulators node. Each regulator is named according +to its regulator type, buck_<name> and ldo_<name>. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 +LDO: + ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, + ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, + ldo_vsim2 + +Example: + + pmic { + compatible = "mediatek,mt6358"; + + mt6358regulator: mt6358regulator { + compatible = "mediatek,mt6358-regulator"; + + mt6358_vdram1_reg: buck_vdram1 { + regulator-compatible = "buck_vdram1"; + regulator-name = "vdram1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2087500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vcore_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vpa_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <250>; + }; + + mt6358_vproc11_reg: buck_vproc11 { + regulator-name = "vproc11"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vproc12_reg: buck_vproc12 { + regulator-name = "vproc12"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + regulator-always-on; + }; + + mt6358_vgpu_reg: buck_vgpu { + regulator-name = "vgpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <200>; + }; + + mt6358_vs2_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2087500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vmodem_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <900>; + regulator-always-on; + }; + + mt6358_vs1_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2587500>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + + mt6358_vdram2_reg: ldo_vdram2 { + regulator-name = "vdram2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <3300>; + }; + + mt6358_vsim1_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <540>; + }; + + mt6358_vibr_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vrf12_reg: ldo_vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6358_vio18_reg: ldo_vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <2700>; + regulator-always-on; + }; + + mt6358_vusb_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6358_vcamio_reg: ldo_vcamio { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcamd_reg: ldo_vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcn18_reg: ldo_vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vfe28_reg: ldo_vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_proc11_reg: ldo_vsram_proc11 { + regulator-name = "vsram_proc11"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vcn28_reg: ldo_vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_others_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vsram_gpu_reg: ldo_vsram_gpu { + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + }; + + mt6358_vxo22_reg: ldo_vxo22 { + compatible = "regulator-fixed"; + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + regulator-always-on; + }; + + mt6358_vefuse_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vaux18_reg: ldo_vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vmch_reg: ldo_vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vbif28_reg: ldo_vbif28 { + compatible = "regulator-fixed"; + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsram_proc12_reg: ldo_vsram_proc12 { + regulator-name = "vsram_proc12"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + + mt6358_vcama1_reg: ldo_vcama1 { + regulator-name = "vcama1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vemc_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + regulator-always-on; + }; + + mt6358_vio28_reg: ldo_vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_va12_reg: ldo_va12 { + compatible = "regulator-fixed"; + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <270>; + regulator-always-on; + }; + + mt6358_vrf18_reg: ldo_vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <120>; + }; + + mt6358_vcn33_bt_reg: ldo_vcn33_bt { + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vcama2_reg: ldo_vcama2 { + regulator-name = "vcama2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vmc_reg: ldo_vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <60>; + }; + + mt6358_vldo28_reg: ldo_vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vaud28_reg: ldo_vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <270>; + }; + + mt6358_vsim2_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <540>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml new file mode 100644 index 000000000..a462d99a2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 Regulator from MediaTek Integrated + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + list of regulators provided by this controller, must be named + after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7 + +properties: + compatible: + const: mediatek,mt6360-regulator + + LDO_VIN1-supply: + description: Input supply phandle(s) for LDO1/2/3 + LDO_VIN2-supply: + description: Input supply phandle(s) for LDO5 + LDO_VIN3-supply: + description: Input supply phandle(s) for LDO6/7 + +patternProperties: + "^buck[12]$": + $ref: "regulator.yaml#" + + "^ldo[123567]$": + $ref: "regulator.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt new file mode 100644 index 000000000..0058441f1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt @@ -0,0 +1,89 @@ +MediaTek MT6380 Regulator + +All voltage regulators provided by the MT6380 PMIC are described as the +subnodes of the MT6380 regulators node. Each regulator is named according +to its regulator type, buck-<name> and ldo-<name>. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + buck-core1, buck-vcore, buck-vrf +LDO: + ldo-vm ,ldo-va , ldo-vphy, ldo-vddr, ldo-vt + +Example: + + regulators { + compatible = "mediatek,mt6380-regulator"; + + mt6380_vcpu_reg: buck-vcore1 { + regulator-name = "vcore1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + }; + + mt6380_vrf_reg: buck-vrf { + regulator-name = "vrf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1575000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vm_reg: ldo-vm { + regulator-name = "vm"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_va_reg: ldo-va { + regulator-name = "va"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vphy_reg: ldo-vphy { + regulator-name = "vphy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vddr_reg: ldo-vddr { + regulator-name = "vddr"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1840000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vt_reg: ldo-vt { + regulator-name = "vt"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt new file mode 100644 index 000000000..c080086d3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt @@ -0,0 +1,220 @@ +Mediatek MT6397 Regulator + +Required properties: +- compatible: "mediatek,mt6397-regulator" +- mt6397regulator: List of regulators provided by this controller. It is named + according to its regulator type, buck_<name> and ldo_<name>. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu, + buck_vdrm, buck_vio18 +LDO: + ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, + ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6, + ldo_vibr + +BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to +values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h + +Example: + pmic { + compatible = "mediatek,mt6397"; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <200>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2120000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <240>; + }; + + mt6397_usb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + /* fixed output 3.3 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1220000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + egulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt new file mode 100644 index 000000000..4bf2dbf7c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt @@ -0,0 +1,65 @@ +NVIDIA Tegra Regulators Coupling +================================ + +NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators. +Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30 +there are 2. + +Tegra20 voltage coupling +------------------------ + +On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU. +The CORE and RTC voltages shall be in a range of 170mV from each other +and they both shall be higher than the CPU voltage by at least 120mV. + +Tegra30 voltage coupling +------------------------ + +On Tegra30 SoC's there are 2 coupled regulators: CORE and CPU. The CORE +and CPU voltages shall be in a range of 300mV from each other and CORE +voltage shall be higher than the CPU by N mV, where N depends on the CPU +voltage. + +Required properties: +- nvidia,tegra-core-regulator: Boolean property that designates regulator + as the "Core domain" voltage regulator. +- nvidia,tegra-rtc-regulator: Boolean property that designates regulator + as the "RTC domain" voltage regulator. +- nvidia,tegra-cpu-regulator: Boolean property that designates regulator + as the "CPU domain" voltage regulator. + +Example: + + pmic { + regulators { + core_vdd_reg: core { + regulator-name = "vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 550000>; + + nvidia,tegra-core-regulator; + }; + + rtc_vdd_reg: rtc { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 550000>; + + nvidia,tegra-rtc-regulator; + }; + + cpu_vdd_reg: cpu { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; + regulator-coupled-max-spread = <550000 550000>; + + nvidia,tegra-cpu-regulator; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml new file mode 100644 index 000000000..7cebd9ddf --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators + +maintainers: + - Robin Gong <yibin.gong@nxp.com> + +description: | + Regulator nodes should be named to BUCK_<number> and LDO_<number>. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf + +#The valid names for PCA9450 regulator nodes are: +#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, +#LDO1, LDO2, LDO3, LDO4, LDO5 +#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. + +properties: + compatible: + enum: + - nxp,pca9450a + - nxp,pca9450b + - nxp,pca9450c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^LDO[1-5]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + unevaluatedProperties: false + + "^BUCK[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + nxp,dvs-run-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 600000 + maximum: 2187500 + description: + PMIC default "RUN" state voltage in uV. Only Buck1~3 have such + dvs(dynamic voltage scaling) property. + + nxp,dvs-standby-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 600000 + maximum: 2187500 + description: + PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such + dvs(dynamic voltage scaling) property. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml new file mode 100644 index 000000000..eb61e04ef --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/onnn,fan53880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Onsemi FAN53880 PMIC + +maintainers: + - Christoph Fritz <chf.fritz@googlemail.com> + +description: | + The FAN53880 is an I2C porgrammable power management IC (PMIC) + that contains a BUCK (step-down converter), four low dropouts (LDO) + and one BOOST (step-up converter) output. It is designed for mobile + power applications. + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - onnn,fan53880 + + reg: + maxItems: 1 + + VIN12-supply: + description: Input supply phandle(s) for LDO1 and LDO2 + + VIN3-supply: + description: Input supply phandle(s) for LDO3 + + VIN4-supply: + description: Input supply phandle(s) for LDO4 + + PVIN-supply: + description: Input supply phandle(s) for BUCK and BOOST + + regulators: + type: object + $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-4], BUCK and BOOST + + patternProperties: + "^LDO[1-4]$": + type: object + $ref: regulator.yaml# + + "^BUCK|BOOST$": + type: object + $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@35 { + compatible = "onnn,fan53880"; + reg = <0x35>; + + PVIN-supply = <&fixreg_example_vcc>; + + regulators { + BUCK { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt new file mode 100644 index 000000000..84bc76a7c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -0,0 +1,89 @@ +* palmas regulator IP block devicetree bindings + +The tps659038 for the AM57x class have OTP spins that +have different part numbers but the same functionality. There +is not a need to add the OTP spins to the palmas driver. The +spin devices should use the tps659038 as it's compatible value. +This is the list of those devices: +tps659037 + +Required properties: +- compatible : Should be from the list + ti,twl6035-pmic + ti,twl6036-pmic + ti,twl6037-pmic + ti,tps65913-pmic + ti,tps65914-pmic + ti,tps65917-pmic + ti,tps659038-pmic +and also the generic series names + ti,palmas-pmic +- interrupts : The interrupt number and the type which can be looked up here: + arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h +- interrupts-name: The names of the individual interrupts. + +Optional properties: +- ti,ldo6-vibrator : ldo6 is in vibrator mode + +Optional nodes: +- regulators : Must contain a sub-node per regulator from the list below. + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a + description of standard properties for these sub-nodes. + Additional custom properties are listed below. + + For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, + smps45, smps457, smps7 depending on variant, smps6, smps[8-9], + smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb. + + Optional sub-node properties: + ti,warm-reset - maintain voltage during warm reset(boolean) + ti,roof-floor - This takes as optional argument on platform supporting + the rail from desired external control. If there is no argument then + it will be assume that it is controlled by NSLEEP pin. + The valid value for external pins are: + ENABLE1 then 1, + ENABLE2 then 2 or + NSLEEP then 3. + ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, + 2 - eco, 3 - forced pwm + ti,smps-range - OTP has the wrong range set for the hardware so override + 0 - low range, 1 - high range. + +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + +Example: + +#include <dt-bindings/interrupt-controller/irq.h> + +pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupts-name = "short-irq"; + + ti,ldo6-vibrator; + + ti,system-power-controller; + + regulators { + smps12_reg : smps12 { + regulator-name = "smps12"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,warm-reset; + ti,roof-floor = <1>; /* ENABLE1 control */ + ti,mode-sleep = <0>; + ti,smps-range = <1>; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt new file mode 100644 index 000000000..acbcb452a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt @@ -0,0 +1,32 @@ +PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. + +Required properties: +- compatible: + - should be "ti,pbias-dra7" for DRA7 + - should be "ti,pbias-omap2" for OMAP2 + - should be "ti,pbias-omap3" for OMAP3 + - should be "ti,pbias-omap4" for OMAP4 + - should be "ti,pbias-omap5" for OMAP5 + - "ti,pbias-omap" is deprecated +- reg: pbias register offset from syscon base and size of pbias register. +- syscon : phandle of the system control module +- regulator-name : should be + pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs + pbias_sim_omap3 for OMAP3 SoCs + pbias_mmc_omap4 for OMAP4 SoCs + pbias_mmc_omap5 for OMAP5 and DRA7 SoC + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml new file mode 100644 index 000000000..f578e7277 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/pfuze100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PFUZE100 family of regulators + +maintainers: + - Robin Gong <yibin.gong@nxp.com> + +description: | + The valid names for regulators are: + --PFUZE100 + sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE200 + sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin + --PFUZE3000 + sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + --PFUZE3001 + sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + + Each regulator is defined using the standard binding for regulators. + +properties: + $nodename: + pattern: "^pmic@[0-9]$" + + compatible: + enum: + - fsl,pfuze100 + - fsl,pfuze200 + - fsl,pfuze3000 + - fsl,pfuze3001 + + reg: + maxItems: 1 + + fsl,pfuze-support-disable-sw: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Boolean, if present disable all unused switch regulators to save power + consumption. Attention, ensure that all important regulators + (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property. + If not present, the switched regulators are always on and can't be + disabled. This binding is a workaround to keep backward compatibility + with old dtb's which rely on the fact that the switched regulators are + always on and don't mark them explicit as "regulator-always-on". + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power management + IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + + regulators: + type: object + description: | + list of regulators provided by this controller. + + patternProperties: + "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": + $ref: "regulator.yaml#" + type: object + + "^vgen[1-6]$": + $ref: "regulator.yaml#" + type: object + + "^(vsnvs|vref|vrefddr|swbst|coin)$": + $ref: "regulator.yaml#" + type: object + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt new file mode 100644 index 000000000..6a7c8a92f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88060.txt @@ -0,0 +1,124 @@ +* Powerventure Semiconductor PV88060 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88060". +- reg: I2C slave address, usually 0x49. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4, + SW5, and SW6. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88060@49 { + compatible = "pvs,pv88060"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <4387500>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + SW1 { + regulator-name = "sw1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + SW2 { + regulator-name = "sw2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW3 { + regulator-name = "sw3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW4 { + regulator-name = "sw4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW5 { + regulator-name = "sw5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW6 { + regulator-name = "sw6"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt new file mode 100644 index 000000000..e6e4b9c82 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88080.txt @@ -0,0 +1,62 @@ +* Powerventure Semiconductor PV88080 Voltage Regulator + +Required properties: +- compatible: Must be one of the following, depending on the + silicon version: + - "pvs,pv88080" (DEPRECATED) + + - "pvs,pv88080-aa" for PV88080 AA or AB silicon + - "pvs,pv88080-ba" for PV88080 BA or BB silicon + NOTE: The use of the compatibles with no silicon version is deprecated. +- reg: I2C slave address, usually 0x49 +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3 and HVBUCK. + +Optional properties: +- Any optional property defined in regulator.txt + +Example: + + pmic: pv88080@49 { + compatible = "pvs,pv88080-ba"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2193750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + HVBUCK { + regulator-name = "hvbuck"; + regulator-min-microvolt = < 5000>; + regulator-max-microvolt = <1275000>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/regulator/pv88090.txt b/Documentation/devicetree/bindings/regulator/pv88090.txt new file mode 100644 index 000000000..e52b2a95c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88090.txt @@ -0,0 +1,65 @@ +* Powerventure Semiconductor PV88090 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88090". +- reg: I2C slave address, usually 0x48. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3, LDO1, and LDO2. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88090@48 { + compatible = "pvs,pv88090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + regulator-boot-on; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <4350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = < 650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt new file mode 100644 index 000000000..3d78d507e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -0,0 +1,92 @@ +Bindings for the Generic PWM Regulator +====================================== + +Currently supports 2 modes of operation: + +Voltage Table: When in this mode, a voltage table (See below) of + predefined voltage <=> duty-cycle values must be + provided via DT. Limitations are that the regulator can + only operate at the voltages supplied in the table. + Intermediary duty-cycle values which would normally + allow finer grained voltage selection are ignored and + rendered useless. Although more control is given to + the user if the assumptions made in continuous-voltage + mode do not reign true. + +Continuous Voltage: This mode uses the regulator's maximum and minimum + supplied voltages specified in the + regulator-{min,max}-microvolt properties to calculate + appropriate duty-cycle values. This allows for a much + more fine grained solution when compared with + voltage-table mode above. This solution does make an + assumption that a %50 duty-cycle value will cause the + regulator voltage to run at half way between the + supplied max_uV and min_uV values. + +Required properties: +-------------------- +- compatible: Should be "pwm-regulator" + +- pwms: PWM specification (See: ../pwm/pwm.txt) + +Only required for Voltage Table Mode: +- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells + First cell is voltage in microvolts (uV) + Second cell is duty-cycle in percent (%) + +Optional properties for Continuous mode: +- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not + defined, <100> is assumed, meaning that + pwm-dutycycle-range contains values expressed in + percent. + +- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding + the dutycycle for regulator-min-microvolt and the + second one the dutycycle for regulator-max-microvolt. + Duty cycle values are expressed in pwm-dutycycle-unit. + If not defined, <0 100> is assumed. + +NB: To be clear, if voltage-table is provided, then the device will be used +in Voltage Table Mode. If no voltage-table is provided, then the device will +be used in Continuous Voltage Mode. + +Optional properties: +-------------------- +- enable-gpios: GPIO to use to enable/disable the regulator + +Any property defined as part of the core regulator binding can also be used. +(See: ../regulator/regulator.txt) + +Continuous Voltage With Enable GPIO Example: + pwm_regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 8448 0>; + enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + /* unit == per-mille */ + pwm-dutycycle-unit = <1000>; + /* + * Inverted PWM logic, and the duty cycle range is limited + * to 30%-70%. + */ + pwm-dutycycle-range = <700 300>; /* */ + }; + +Voltage Table Example: + pwm_regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 8448 0>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + + /* Voltage Duty-Cycle */ + voltage-table = <1114000 0>, + <1095000 10>, + <1076000 20>, + <1056000 30>, + <1036000 40>, + <1016000 50>; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt new file mode 100644 index 000000000..97c3e0b76 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -0,0 +1,171 @@ +Qualcomm Technologies, Inc. RPMh Regulators + +rpmh-regulator devices support PMIC regulator management via the Voltage +Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. The APPS +processor communicates with these hardware blocks via a Resource State +Coordinator (RSC) using command packets. The VRM allows changing three +parameters for a given regulator: enable state, output voltage, and operating +mode. The XOB allows changing only a single parameter for a given regulator: +its enable state. Despite its name, the XOB is capable of controlling the +enable state of any PMIC peripheral. It is used for clock buffers, low-voltage +switches, and LDO/SMPS regulators which have a fixed voltage and mode. + +======================= +Required Node Structure +======================= + +RPMh regulators must be described in two levels of device nodes. The first +level describes the PMIC containing the regulators and must reside within an +RPMh device node. The second level describes each regulator within the PMIC +which is to be used on the board. Each of these regulators maps to a single +RPMh resource. + +The names used for regulator nodes must match those supported by a given PMIC. +Supported regulator node names: + PM8005: smps1 - smps4 + PM8009: smps1 - smps2, ldo1 - ldo7 + PM8150: smps1 - smps10, ldo1 - ldo18 + PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb + PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + PMI8998: bob + PM6150: smps1 - smps5, ldo1 - ldo19 + PM6150L: smps1 - smps8, ldo1 - ldo11, bob + +======================== +First Level Nodes - PMIC +======================== + +- compatible + Usage: required + Value type: <string> + Definition: Must be one of below: + "qcom,pm8005-rpmh-regulators" + "qcom,pm8009-rpmh-regulators" + "qcom,pm8150-rpmh-regulators" + "qcom,pm8150l-rpmh-regulators" + "qcom,pm8998-rpmh-regulators" + "qcom,pmi8998-rpmh-regulators" + "qcom,pm6150-rpmh-regulators" + "qcom,pm6150l-rpmh-regulators" + +- qcom,pmic-id + Usage: required + Value type: <string> + Definition: RPMh resource name suffix used for the regulators found on + this PMIC. Typical values: "a", "b", "c", "d", "e", "f". + +- vdd-s1-supply +- vdd-s2-supply +- vdd-s3-supply +- vdd-s4-supply + Usage: optional (PM8998 and PM8005 only) + Value type: <phandle> + Definition: phandle of the parent supply regulator of one or more of the + regulators for this PMIC. + +- vdd-s5-supply +- vdd-s6-supply +- vdd-s7-supply +- vdd-s8-supply +- vdd-s9-supply +- vdd-s10-supply +- vdd-s11-supply +- vdd-s12-supply +- vdd-s13-supply +- vdd-l1-l27-supply +- vdd-l2-l8-l17-supply +- vdd-l3-l11-supply +- vdd-l4-l5-supply +- vdd-l6-supply +- vdd-l7-l12-l14-l15-supply +- vdd-l9-supply +- vdd-l10-l23-l25-supply +- vdd-l13-l19-l21-supply +- vdd-l16-l28-supply +- vdd-l18-l22-supply +- vdd-l20-l24-supply +- vdd-l26-supply +- vin-lvs-1-2-supply + Usage: optional (PM8998 only) + Value type: <phandle> + Definition: phandle of the parent supply regulator of one or more of the + regulators for this PMIC. + +- vdd-bob-supply + Usage: optional (PMI8998 only) + Value type: <phandle> + Definition: BOB regulator parent supply phandle + +=============================== +Second Level Nodes - Regulators +=============================== + +- qcom,always-wait-for-ack + Usage: optional + Value type: <empty> + Definition: Boolean flag which indicates that the application processor + must wait for an ACK or a NACK from RPMh for every request + sent for this regulator including those which are for a + strictly lower power state. + +Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt +may also be used. regulator-initial-mode and regulator-allowed-modes may be +specified for VRM regulators using mode values from +include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass +may be specified for BOB type regulators managed via VRM. +regulator-allow-set-load may be specified for LDO type regulators managed via +VRM. + +======== +Examples +======== + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l7-l12-l14-l15-supply = <&pm8998_s5>; + + smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8998_s5: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_AUTO + RPMH_REGULATOR_MODE_HPM>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml new file mode 100644 index 000000000..a35c6cb9b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM SMD RPM REGULATOR + +description: + The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. + Because SMD is used as the communication transport mechanism, the RPM + resides as a subnode of the SMD. As such, the SMD-RPM regulator requires + that the SMD and RPM nodes be present. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for + information pertaining to the SMD node. + + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml + for information regarding the RPM node. + + The regulator node houses sub-nodes for each regulator within the device. + Each sub-node is identified using the node's name, with valid values listed + for each of the pmics below. + + For mp5496, s2 + + For pm8841, s1, s2, s3, s4, s5, s6, s7, s8 + + For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18 + + For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, + lvs3, 5vs1, 5vs2 + + For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6, + l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, + l23 + + For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, + l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 + + For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, + l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 + + For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22, + l12, l13, l14, l15, l16, l17, l18, l19 + + For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob + + For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, + l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, + l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 + + For pmi8994, s1, s2, s3, boost-bypass + + For pmi8998, bob + + For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l13 + +maintainers: + - Kathiravan T <kathirav@codeaurora.org> + +properties: + compatible: + enum: + - qcom,rpm-mp5496-regulators + - qcom,rpm-pm8841-regulators + - qcom,rpm-pm8916-regulators + - qcom,rpm-pm8941-regulators + - qcom,rpm-pm8950-regulators + - qcom,rpm-pm8953-regulators + - qcom,rpm-pm8994-regulators + - qcom,rpm-pm8998-regulators + - qcom,rpm-pm660-regulators + - qcom,rpm-pm660l-regulators + - qcom,rpm-pma8084-regulators + - qcom,rpm-pmi8994-regulators + - qcom,rpm-pmi8998-regulators + - qcom,rpm-pms405-regulators + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": + description: List of regulators and its properties + $ref: regulator.yaml# + +additionalProperties: false + +required: + - compatible + +examples: + - | + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_boost: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt new file mode 100644 index 000000000..2b544059e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -0,0 +1,346 @@ +Qualcomm SPMI Regulators + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8004-regulators" + "qcom,pm8005-regulators" + "qcom,pm8841-regulators" + "qcom,pm8916-regulators" + "qcom,pm8941-regulators" + "qcom,pm8950-regulators" + "qcom,pm8994-regulators" + "qcom,pmi8994-regulators" + "qcom,pm660-regulators" + "qcom,pm660l-regulators" + "qcom,pms405-regulators" + +- interrupts: + Usage: optional + Value type: <prop-encoded-array> + Definition: List of OCP interrupts. + +- interrupt-names: + Usage: required if 'interrupts' property present + Value type: <string-array> + Definition: List of strings defining the names of the + interrupts in the 'interrupts' property 1-to-1. + Supported values are "ocp-<regulator_name>", where + <regulator_name> corresponds to a voltage switch + type regulator. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: + Usage: optional (pm8841 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_l1_l3-supply: +- vdd_l2-supply: +- vdd_l4_l5_l6-supply: +- vdd_l7-supply: +- vdd_l8_l11_l14_l15_l16-supply: +- vdd_l9_l10_l12_l13_l17_l18-supply: + Usage: optional (pm8916 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1_l3-supply: +- vdd_l2_lvs_1_2_3-supply: +- vdd_l4_l11-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15-supply: +- vdd_l8_l16_l18_19-supply: +- vdd_l9_l10_l17_l22-supply: +- vdd_l13_l20_l23_l24-supply: +- vdd_l21-supply: +- vin_5vs-supply: + Usage: optional (pm8941 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_l1_l19-supply: +- vdd_l2_l23-supply: +- vdd_l3-supply: +- vdd_l4_l5_l6_l7_l16-supply: +- vdd_l8_l11_l12_l17_l22-supply: +- vdd_l9_l10_l13_l14_l15_l18-supply: +- vdd_l20-supply: +- vdd_l21-supply: + Usage: optional (pm8950 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vdd_s9-supply: +- vdd_s10-supply: +- vdd_s11-supply: +- vdd_s12-supply: +- vdd_l1-supply: +- vdd_l2_l26_l28-supply: +- vdd_l3_l11-supply: +- vdd_l4_l27_l31-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l32-supply: +- vdd_l8_l16_l30-supply: +- vdd_l9_l10_l18_l22-supply: +- vdd_l13_l19_l23_l24-supply: +- vdd_l14_l15-supply: +- vdd_l17_l29-supply: +- vdd_l20_l21-supply: +- vdd_l25-supply: +- vdd_lvs_1_2-supply: + Usage: optional (pm8994 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1-supply: + Usage: optional (pmi8994 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_l1_l6_l7-supply: +- vdd_l2_l3-supply: +- vdd_l5-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14-supply: +- vdd_l15_l16_l17_l18_l19-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s5-supply: +- vdd_s6-supply: + Usage: optional (pm660 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_l1_l9_l10-supply: +- vdd_l2-supply: +- vdd_l3_l5_l7_l8-supply: +- vdd_l4_l6-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: + Usage: optional (pm660l only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_l1_l2-supply: +- vdd_l3_l8-supply: +- vdd_l4-supply: +- vdd_l5_l6-supply: +- vdd_l10_l11_l12_l13-supply: +- vdd_l7-supply: +- vdd_l9-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply + Usage: optional (pms405 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- qcom,saw-reg: + Usage: optional + Value type: <phandle> + Description: Reference to syscon node defining the SAW registers. + + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the PMICs below. + +pm8004: + s2, s5 + +pm8005: + s1, s2, s3, s4 + +pm8841: + s1, s2, s3, s4, s5, s6, s7, s8 + +pm8916: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18 + +pm8941: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, + 5vs1, 5vs2 + +pm8994: + s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, + l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, + l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 + +pmi8994: + s1, s2, s3, l1 + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt - with additional custom properties described below: + +- regulator-initial-mode: + Usage: optional + Value type: <u32> + Description: 2 = Set initial mode to auto mode (automatically select + between HPM and LPM); not available on boost type + regulators. + + 1 = Set initial mode to high power mode (HPM), also referred + to as NPM. HPM consumes more ground current than LPM, but + it can source significantly higher load current. HPM is not + available on boost type regulators. For voltage switch type + regulators, HPM implies that over current protection and + soft start are active all the time. + + 0 = Set initial mode to low power mode (LPM). + +- qcom,ocp-max-retries: + Usage: optional + Value type: <u32> + Description: Maximum number of times to try toggling a voltage switch + off and back on as a result of consecutive over current + events. + +- qcom,ocp-retry-delay: + Usage: optional + Value type: <u32> + Description: Time to delay in milliseconds between each voltage switch + toggle after an over current event takes place. + +- qcom,pin-ctrl-enable: + Usage: optional + Value type: <u32> + Description: Bit mask specifying which hardware pins should be used to + enable the regulator, if any; supported bits are: + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + +- qcom,pin-ctrl-hpm: + Usage: optional + Value type: <u32> + Description: Bit mask specifying which hardware pins should be used to + force the regulator into high power mode, if any; + supported bits are: + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + BIT(4) = follow PMIC awake state + +- qcom,vs-soft-start-strength: + Usage: optional + Value type: <u32> + Description: This property sets the soft start strength for voltage + switch type regulators; supported values are: + 0 = 0.05 uA + 1 = 0.25 uA + 2 = 0.55 uA + 3 = 0.75 uA + +- qcom,saw-slave: + Usage: optional + Value type: <boo> + Description: SAW controlled gang slave. Will not be configured. + +- qcom,saw-leader: + Usage: optional + Value type: <boo> + Description: SAW controlled gang leader. Will be configured as + SAW regulator. + +Example: + + regulators { + compatible = "qcom,pm8941-regulators"; + vdd_l1_l3-supply = <&s1>; + + s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + }; + + ... + + l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + .... + }; + +Example 2: + + saw3: syscon@9A10000 { + compatible = "syscon"; + reg = <0x9A10000 0x1000>; + }; + + ... + + spm-regulators { + compatible = "qcom,pm8994-regulators"; + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + pm8994_s11_saw: s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1140000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml new file mode 100644 index 000000000..12ed98c28 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,usb-vbus-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The Qualcomm PMIC VBUS output regulator driver + +maintainers: + - Wesley Cheng <wcheng@codeaurora.org> + +description: | + This regulator driver controls the VBUS output by the Qualcomm PMIC. This + regulator will be enabled in situations where the device is required to + provide power to the connected peripheral. + +properties: + compatible: + enum: + - qcom,pm8150b-vbus-reg + + reg: + maxItems: 1 + description: VBUS output base address + +required: + - compatible + +additionalProperties: false + +examples: + - | + pm8150b { + #address-cells = <1>; + #size-cells = <0>; + pm8150b_vbus: dcdc@1100 { + compatible = "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml new file mode 100644 index 000000000..53853ec20 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator + +maintainers: + - Sumit Semwal <sumit.semwal@linaro.org> + +description: + LAB can be used as a positive boost power supply and IBB can be used as a + negative boost power supply for display panels. Currently implemented for + pmi8998. + +properties: + compatible: + const: qcom,pmi8998-lab-ibb + + lab: + type: object + + properties: + + interrupts: + maxItems: 1 + description: + Short-circuit interrupt for lab. + + required: + - interrupts + + ibb: + type: object + + properties: + + interrupts: + maxItems: 1 + description: + Short-circuit interrupt for lab. + + required: + - interrupts + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + lab { + interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "sc-err"; + }; + + ibb { + interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "sc-err"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml new file mode 100644 index 000000000..0ae25d119 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The RaspberryPi 7" display has an ATTINY88-based regulator/backlight + controller on the PCB, which is used to turn the display unit on/off + and control the backlight. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: raspberrypi,7inch-touchscreen-panel-regulator + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@45 { + compatible = "raspberrypi,7inch-touchscreen-panel-regulator"; + reg = <0x45>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt new file mode 100644 index 000000000..1c4bfe786 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt @@ -0,0 +1,222 @@ +Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor. + +Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply +of these regulators are defined under parent device node. +Details of regulator properties are defined as child node under +sub-node "regulators" which is child node of device node. + +Please refer file <Documentation/devicetree/bindings/regulator/regulator.txt> +for common regulator bindings used by client. + +Following are properties of parent node related to regulators. + +Optional properties: +------------------- +The input supply of regulators are the optional properties on the +parent device node. The input supply of these regulators are provided +through following properties: +in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins. +in-sd1-supply: Input supply for SD1. +in-sd2-supply: Input supply for SD2. +in-sd3-supply: Input supply for SD3. +in-ldo0-1-supply: Input supply for LDO0 and LDO1. +in-ldo2-supply: Input supply for LDO2. +in-ldo3-5-supply: Input supply for LDO3 and LDO5 +in-ldo4-6-supply: Input supply for LDO4 and LDO6. +in-ldo7-8-supply: Input supply for LDO7 and LDO8. + +Optional sub nodes for regulators under "regulators" subnode: +------------------------------------------------------------ +The subnodes name is the name of regulator and it must be one of: + sd[0-3], ldo[0-8] + +Each sub-node should contain the constraints and initialization +information for that regulator. The definition for each of these +nodes is defined using the standard binding for regulators found at +<Documentation/devicetree/bindings/regulator/regulator.txt>. + +Theres are also additional properties for SD/LDOs. These additional properties +are required to configure FPS configuration parameters for SDs and LDOs. +Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible +Power Sequence (FPS). +Following are additional properties: + +- maxim,active-fps-source: FPS source for the regulators to get + enabled/disabled when system is in + active state. Valid values are: + - MAX77620_FPS_SRC_0, + FPS source is FPS0. + - MAX77620_FPS_SRC_1, + FPS source is FPS1 + - MAX77620_FPS_SRC_2 and + FPS source is FPS2 + - MAX77620_FPS_SRC_NONE. + Regulator is not controlled + by FPS events and it gets + enabled/disabled by register + access. + Absence of this property will leave + the FPS configuration register for that + regulator to default configuration. + +- maxim,active-fps-power-up-slot: Sequencing event slot number on which + the regulator get enabled when + master FPS input event set to HIGH. + Valid values are 0 to 7. + This is applicable if FPS source is + selected as FPS0, FPS1 or FPS2. + +- maxim,active-fps-power-down-slot: Sequencing event slot number on which + the regulator get disabled when master + FPS input event set to LOW. + Valid values are 0 to 7. + This is applicable if FPS source is + selected as FPS0, FPS1 or FPS2. + +- maxim,suspend-fps-source: This is same as property + "maxim,active-fps-source" but value + get configured when system enters in + to suspend state. + +- maxim,suspend-fps-power-up-slot: This is same as property + "maxim,active-fps-power-up-slot" but + this value get configured into FPS + configuration register when system + enters into suspend. + This is applicable if suspend state + FPS source is selected as FPS0, FPS1 or + +- maxim,suspend-fps-power-down-slot: This is same as property + "maxim,active-fps-power-down-slot" but + this value get configured into FPS + configuration register when system + enters into suspend. + This is applicable if suspend state + FPS source is selected as FPS0, FPS1 or + FPS2. +- maxim,ramp-rate-setting: integer, ramp rate(uV/us) setting to be + configured to the device. + The platform may have different ramp + rate than advertised ramp rate if it has + design variation from Maxim's + recommended. On this case, platform + specific ramp rate is used for ramp time + calculation and this property is used + for device register configurations. + The measured ramp rate of platform is + provided by the regulator-ramp-delay + as described in <devicetree/bindings/ + regulator/regulator.txt>. + Maxim Max77620 supports following ramp + delay: + SD: 13.75mV/us, 27.5mV/us, 55mV/us + LDOs: 5mV/us, 100mV/us + +Note: If the measured ramp delay is same as advertised ramp delay then it is not +required to provide the ramp delay with property "maxim,ramp-rate-setting". The +ramp rate can be provided by the regulator-ramp-delay which will be used for +ramp time calculation for voltage change as well as for device configuration. + +Example: +-------- +#include <dt-bindings/mfd/max77620.h> +... +max77620@3c { + in-ldo0-1-supply = <&max77620_sd2>; + in-ldo7-8-supply = <&max77620_sd2>; + regulators { + sd0 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + sd1 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + sd2 { + regulator-name = "vdd-pre-reg"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + }; + + sd3 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "avdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "vdd-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "vdd-cam-hv"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo4 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "avdd-ts-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo6 { + regulator-name = "vdd-ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-name = "vdd-gen-pll-edp"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8 { + regulator-name = "vdd-hdmi-dp"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt new file mode 100644 index 000000000..487ccd837 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -0,0 +1 @@ +This file has moved to regulator.yaml. diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml new file mode 100644 index 000000000..6d0bc9cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltage/Current Regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +properties: + regulator-name: + description: A string used as a descriptive name for regulator outputs + $ref: "/schemas/types.yaml#/definitions/string" + + regulator-min-microvolt: + description: smallest voltage consumers may set + + regulator-max-microvolt: + description: largest voltage consumers may set + + regulator-microvolt-offset: + description: Offset applied to voltages to compensate for voltage drops + + regulator-min-microamp: + description: smallest current consumers may set + + regulator-max-microamp: + description: largest current consumers may set + + regulator-input-current-limit-microamp: + description: maximum input current regulator allows + + regulator-always-on: + description: boolean, regulator should never be disabled + type: boolean + + regulator-boot-on: + description: bootloader/firmware enabled regulator. + It's expected that this regulator was left on by the bootloader. + If the bootloader didn't leave it on then OS should turn it on + at boot but shouldn't prevent it from being turned off later. + This property is intended to only be used for regulators where + software cannot read the state of the regulator. + type: boolean + + regulator-allow-bypass: + description: allow the regulator to go into bypass mode + type: boolean + + regulator-allow-set-load: + description: allow the regulator performance level to be configured + type: boolean + + regulator-ramp-delay: + description: ramp delay for regulator(in uV/us) For hardware which supports + disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay + = <0>) for disabling ramp delay. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-enable-ramp-delay: + description: The time taken, in microseconds, for the supply rail to + reach the target voltage, plus/minus whatever tolerance the board + design requires. This property describes the total system ramp time + required due to the combination of internal ramping of the regulator + itself, and board design issues such as trace capacitance and load + on the supply. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-settling-time-us: + description: Settling time, in microseconds, for voltage change if regulator + have the constant time for any level voltage change. This is useful + when regulator have exponential voltage change. + + regulator-settling-time-up-us: + description: Settling time, in microseconds, for voltage increase if + the regulator needs a constant time to settle after voltage increases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-settling-time-down-us: + description: Settling time, in microseconds, for voltage decrease if + the regulator needs a constant time to settle after voltage decreases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-soft-start: + description: Enable soft start so that voltage ramps slowly + type: boolean + + regulator-initial-mode: + description: initial operating mode. The set of possible operating modes + depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-allowed-modes: + description: list of operating modes that software is allowed to configure + for the regulator at run-time. Elements may be specified in any order. + The set of possible operating modes depends on the capabilities of + every hardware so each device binding document explains which values + the regulator supports. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + + regulator-system-load: + description: Load in uA present on regulator that is not captured by + any consumer request. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-pull-down: + description: Enable pull down resistor when the regulator is disabled. + type: boolean + + regulator-over-current-protection: + description: Enable over current protection. + type: boolean + + regulator-active-discharge: + description: | + tristate, enable/disable active discharge of regulators. The values are: + 0: Disable active discharge. + 1: Enable active discharge. + Absence of this property will leave configuration to default. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] + + regulator-coupled-with: + description: Regulators with which the regulator is coupled. The linkage + is 2-way - all coupled regulators should be linked with each other. + A regulator should not be coupled with its supplier. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + + regulator-coupled-max-spread: + description: Array of maximum spread between voltages of coupled regulators + in microvolts, each value in the array relates to the corresponding + couple specified by the regulator-coupled-with property. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-max-step-microvolt: + description: Maximum difference between current and target voltages + that can be changed safely in a single step. + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + regulator-state-(standby|mem|disk): + type: object + description: + sub-nodes for regulator state in Standby, Suspend-to-RAM, and + Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux + sleep states. + + properties: + regulator-on-in-suspend: + description: regulator should be on in suspend state. + type: boolean + + regulator-off-in-suspend: + description: regulator should be off in suspend state. + type: boolean + + regulator-suspend-min-microvolt: + description: minimum voltage may be set in suspend state. + + regulator-suspend-max-microvolt: + description: maximum voltage may be set in suspend state. + + regulator-suspend-microvolt: + description: the default voltage which regulator would be set in + suspend. This property is now deprecated, instead setting voltage + for suspend mode via the API which regulator driver provides is + recommended. + + regulator-changeable-in-suspend: + description: whether the default voltage and the regulator on/off + in suspend can be changed in runtime. + type: boolean + + regulator-mode: + description: operating mode in the given suspend state. The set + of possible operating modes depends on the capabilities of every + hardware so the valid modes are documented on each regulator device + tree binding document. + $ref: "/schemas/types.yaml#/definitions/uint32" + + additionalProperties: false + +additionalProperties: true + +examples: + - | + xyzreg: regulator { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml new file mode 100644 index 000000000..235e593b3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4801 Display Bias regulators + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Regulator nodes should be named to DSVP and DSVN. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf + +#The valid names for RT4801 regulator nodes are: +#DSVP, DSVN + +properties: + compatible: + enum: + - richtek,rt4801 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIOs to use to enable DSVP/DSVN regulator. + The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. + Number of GPIO in the array list could be 1 or 2. + If only one gpio is specified, only one gpio used to control ENP/ENM. + Else both are spefied, DSVP/DSVN could be controlled individually. + Othersie, this property not specified. treat both as always-on regulator. + minItems: 1 + maxItems: 2 + +patternProperties: + "^DSV(P|N)$": + type: object + $ref: regulator.yaml# + description: + Properties for single display bias regulator. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4801@73 { + compatible = "richtek,rt4801"; + reg = <0x73>; + enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>; + + dsvp: DSVP { + regulator-name = "rt4801,dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvn: DSVN { + regulator-name = "rt4801,dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml new file mode 100644 index 000000000..a8ccb5cb8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTMV20 laser diode regulator + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Richtek RTMV20 is a load switch current regulator that can supply up to 6A. + It is used to drive laser diode. There're two signals for chip controls + (Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication. + There're still four pins for camera control, two inputs (strobe and vsync), + the others for outputs (fsin1 and fsin2). Strobe input to start the current + supply, vsync input from IR camera, and fsin1/fsin2 output for the optional. + +properties: + compatible: + const: richtek,rtmv20 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,ld-pulse-delay-us: + description: | + load current pulse delay in microsecond after strobe pin pulse high. + minimum: 0 + maximum: 100000 + default: 0 + + richtek,ld-pulse-width-us: + description: | + Load current pulse width in microsecond after strobe pin pulse high. + minimum: 0 + maximum: 10000 + default: 1200 + + richtek,fsin1-delay-us: + description: | + Fsin1 pulse high delay in microsecond after vsync signal pulse high. + minimum: 0 + maximum: 100000 + default: 23000 + + richtek,fsin1-width-us: + description: | + Fsin1 pulse high width in microsecond after vsync signal pulse high. + minimum: 40 + maximum: 10000 + default: 160 + + richtek,fsin2-delay-us: + description: | + Fsin2 pulse high delay in microsecond after vsync signal pulse high. + minimum: 0 + maximum: 100000 + default: 23000 + + richtek,fsin2-width-us: + description: | + Fsin2 pulse high width in microsecond after vsync signal pulse high. + minimum: 40 + maximum: 10000 + default: 160 + + richtek,es-pulse-width-us: + description: Eye safety function pulse width limit in microsecond. + minimum: 0 + maximum: 10000 + default: 1200 + + richtek,es-ld-current-microamp: + description: Eye safety function load current limit in microamp. + minimum: 0 + maximum: 6000000 + default: 3000000 + + richtek,lbp-level-microvolt: + description: Low battery protection level in microvolt. + minimum: 2400000 + maximum: 3700000 + default: 2700000 + + richtek,lbp-enable: + description: Low battery protection function enable control. + type: boolean + + richtek,strobe-polarity-high: + description: Strobe pin active polarity control. + type: boolean + + richtek,vsync-polarity-high: + description: Vsync pin active polarity control. + type: boolean + + richtek,fsin-enable: + description: Fsin function enable control. + type: boolean + + richtek,fsin-output: + description: Fsin function output control. + type: boolean + + richtek,es-enable: + description: Eye safety function enable control. + type: boolean + + lsw: + description: load switch current regulator description. + type: object + $ref: "regulator.yaml#" + +required: + - compatible + - reg + - wakeup-source + - interrupts + - enable-gpios + - lsw + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtmv20@34 { + compatible = "richtek,rtmv20"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>; + enable-gpios = <&gpio26 3 0>; + + richtek,strobe-polarity-high; + richtek,vsync-polarity-high; + + lsw { + regulator-name = "rtmv20,lsw"; + regulator-min-microamp = <0>; + regulator-max-microamp = <6000000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt new file mode 100644 index 000000000..698cfc3bc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt @@ -0,0 +1,68 @@ +ROHM BD70528 Power Management Integrated Circuit regulator bindings + +Required properties: + - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3", + "led_ldo1", "led_ldo2" + +List of regulators provided by this controller. BD70528 regulators node +should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at +Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt + +The valid names for BD70528 regulator nodes are: +BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2 + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: +regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-ramp-delay = <250>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + }; + led_ldo1: LED_LDO1 { + regulator-name = "led_ldo1"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + led_ldo2: LED_LDO2 { + regulator-name = "led_ldo2"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml new file mode 100644 index 000000000..5ce587fff --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71828 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD71828 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + Regulator nodes should be named to BUCK_<number> and LDO_<number>. + The valid names for BD71828 regulator nodes are + BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7 + LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 + +patternProperties: + "^LDO[1-7]$": + type: object + description: + Properties for single LDO regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^ldo[1-7]$" + description: + should be "ldo1", ..., "ldo7" + + unevaluatedProperties: false + + "^BUCK[1-7]$": + type: object + description: + Properties for single BUCK regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^buck[1-7]$" + description: + should be "buck1", ..., "buck7" + + rohm,dvs-run-voltage: + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-idle-voltage: + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-suspend-voltage: + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-lpsr-voltage: + description: + PMIC default "LPSR" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + # Supported default DVS states: + # buck | run | idle | suspend | lpsr + #-------------------------------------------------------------- + # 1, 2, 6, and 7 | supported | supported | supported (*) + #-------------------------------------------------------------- + # 3, 4, and 5 | supported (**) + #-------------------------------------------------------------- + # + #(*) LPSR and SUSPEND states use same voltage but both states have own + # enable / + # disable settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. + # + #(**) All states use same voltage but have own enable / disable + # settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml new file mode 100644 index 000000000..f5e31196a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71837-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71837 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + List of regulators provided by this controller. BD71837 regulators node + should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at + Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml + Regulator nodes should be named to BUCK_<number> and LDO_<number>. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Note that if BD71837 starts at RUN state you probably want to use + regulator-boot-on at least for BUCK6 and BUCK7 so that those are not + disabled by driver at startup. LDO5 and LDO6 are supplied by those and + if they are disabled at startup the voltage monitoring for LDO5/LDO6 will + cause PMIC to reset. + +#The valid names for BD71837 regulator nodes are: +#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8 +#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 + +patternProperties: + "^LDO[1-7]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-7]$" + description: + should be "ldo1", ..., "ldo7" + + unevaluatedProperties: false + + "^BUCK[1-8]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-8]$" + description: + should be "buck1", ..., "buck8" + + rohm,dvs-run-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-idle-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-suspend-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + # Supported default DVS states: + # + # BD71837: + # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage + # ---------------------------------------------------------------- + # 1 | supported | supported | supported + # ---------------------------------------------------------------- + # 2 | supported | supported | not supported + # ---------------------------------------------------------------- + # 3 | supported | not supported | not supported + # ---------------------------------------------------------------- + # 4 | supported | not supported | not supported + # ---------------------------------------------------------------- + # rest | not supported | not supported | not supported + + # BD71837 power outputs can either be controlled by the PMIC internal + # hardware state machine or by software. If you need regulators to be + # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles + # PMIC HW state machine) - then you should set this property. + # Tradeoff is that then SW can't control the ON/OFF state for this + # regulator (other than invoking a PMIC state change). + rohm,no-regulator-enable-control: + description: | + Enable/Disable control of this regulator must be left to the + PMIC hardware state machine. + type: boolean + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml new file mode 100644 index 000000000..eeac32cd1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71847-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + List of regulators provided by this controller. BD71847 regulators node + should be sub node of the BD71847 MFD node. See BD71847 MFD bindings at + Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml + Regulator nodes should be named to BUCK_<number> and LDO_<number>. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Note that if BD71847 starts at RUN state you probably want to use + regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must + not be disabled by driver at startup. If BUCK5 is disabled at startup the + voltage monitoring for LDO5/LDO6 can cause PMIC to reset. + +#The valid names for BD71847 regulator nodes are: +#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 +#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 + +patternProperties: + "^LDO[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-6]$" + description: + should be "ldo1", ..., "ldo6" + + unevaluatedProperties: false + + "^BUCK[1-6]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-6]$" + description: + should be "buck1", ..., "buck6" + + rohm,dvs-run-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-idle-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-suspend-voltage: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + # Supported default DVS states: + # + # BD71847: + # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage + # ---------------------------------------------------------------- + # 1 | supported | supported | supported + # ---------------------------------------------------------------- + # 2 | supported | supported | not supported + # ---------------------------------------------------------------- + # rest | not supported | not supported | not supported + + # BD718(47/50) power outputs can either be controlled by the PMIC internal + # hardware state machine or by software. If you need regulators to be + # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles + # PMIC HW state machine) - then you should set this property. + # Tradeoff is that then SW can't control the ON/OFF state for this + # regulator (other than invoking a PMIC state change). + rohm,no-regulator-enable-control: + description: | + Enable/Disable control of this regulator must be left to the + PMIC hardware state machine. + type: boolean + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml new file mode 100644 index 000000000..b6515a0ce --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd9576-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576 and BD9573 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD9576 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD9576 regulator nodes are + regulator-vd50, regulator-vd18, regulator-vdddr, regulator-vd10, + regulator-voutl1, regulator-vouts1 + +patternProperties: + "regulator-.+": + type: object + description: + Properties for single regulator. + $ref: "regulator.yaml#" + + required: + - regulator-name + + unevaluatedProperties: false +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt new file mode 100644 index 000000000..bae3c7f83 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt @@ -0,0 +1,79 @@ +Binding for Samsung S2MPA01 regulator block +=========================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPA01 device provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by S2MPA01 device: + - LDOn + - valid values for n are 1 to 26 + - Example: LDO1, LD02, LDO26 + - BUCKn + - valid values for n are 1 to 10. + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of buck regulator nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 + (default), 25000, or 50000. May be 0 for disabling the ramp delay on + BUCK{1,2,3,4}. + + In the absence of the regulator-ramp-delay property, the default ramp + delay will be used. + + Note: Some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{2,4}, + - buck{8,9,10}. + +Example: + + s2mpa01_pmic@66 { + compatible = "samsung,s2mpa01-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt new file mode 100644 index 000000000..27a48bf1b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt @@ -0,0 +1,102 @@ +Binding for Samsung S2M family regulator block +============================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by different devices: + - LDOn + - valid values for n are: + - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 + - S2MPS14: 1 to 25 + - S2MPS15: 1 to 27 + - S2MPU02: 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are: + - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 + - S2MPS14: 1 to 5 + - S2MPS15: 1 to 10 + - S2MPU02: 1 to 7 + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500, + 25000 (default) or 50000. + + Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6} + by setting it to <0>. + + Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{3,4}, + - buck{7,8,10}. + + - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be + configured to external control over GPIO. To turn this feature on this + property must be added to the regulator sub-node: + - samsung,ext-control-gpios: GPIO specifier for one GPIO + controlling this regulator (enable/disable) + Example: + LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt new file mode 100644 index 000000000..6cd83d920 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt @@ -0,0 +1,140 @@ +Binding for Samsung S5M8767 regulator block +=========================================== + +This is a part of device tree bindings for S5M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S5M8767 device provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Required properties of the main device node (the parent!): + - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used + for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. + + [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, then all the eight voltage values for the + 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. + +Optional properties of the main device node (the parent!): + - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck3 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck4 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. + - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. + - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: + + - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + + - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + + +Names of regulators supported by S5M8767 device: + - LDOn + - valid values for n are 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are 1 to 9. + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - op_mode: describes the different operating modes of the LDO's with + power mode change in SOC. The different possible values are, + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one + GPIO controlling this regulator + (enable/disable); This is valid only + for buck9. + +Example: + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-uses-gpio-dvs; + s5m8767,pmic-buck3-uses-gpio-dvs; + s5m8767,pmic-buck4-uses-gpio-dvs; + + s5m8767,pmic-buck-default-dvs-idx = <0>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ + <&gpx0 1 0>, /* DVS2 */ + <&gpx0 2 0>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ + <&gpx2 4 0>, /* SET2 */ + <&gpx2 5 0>; /* SET3 */ + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vemmc_reg: BUCK9 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <3>; /* Standby Mode */ + s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml new file mode 100644 index 000000000..82af4d656 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8824x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8824c,sy8824e,sy20276 and sy20278 PMIC + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - silergy,sy8824c + - silergy,sy8824e + - silergy,sy20276 + - silergy,sy20278 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8824c"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + reg = <0x60>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml new file mode 100644 index 000000000..b222adabc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8827n PMIC + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +properties: + compatible: + enum: + - silergy,sy8827n + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + silergy,vsel-state-high: + type: boolean + description: + Indicates if the VSEL pin is set to high. + If this property is missing, assume the VSEL pin is set to low. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8827n"; + reg = <0x60>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt new file mode 100644 index 000000000..f9acbc1f3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt @@ -0,0 +1,18 @@ +SKY81452 voltage regulator + +Required properties: +- regulator node named lout. +- any required generic properties defined in regulator.txt + +Optional properties: +- any available generic properties defined in regulator.txt + +Example: + + regulator { + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt new file mode 100644 index 000000000..aa0733e49 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/slg51000.txt @@ -0,0 +1,88 @@ +* Dialog Semiconductor SLG51000 Voltage Regulator + +Required properties: +- compatible : Should be "dlg,slg51000" for SLG51000 +- reg : Specifies the I2C slave address. +- xxx-supply: Input voltage supply regulator for ldo3 to ldo7. + These entries are required if regulators are enabled for a device. + An absence of these properties can cause the regulator registration to fail. + If some of input supply is powered through battery or always-on supply then + also it is required to have these parameters with proper node handle of always + on power supply. + vin3-supply: Input supply for ldo3 + vin4-supply: Input supply for ldo4 + vin5-supply: Input supply for ldo5 + vin6-supply: Input supply for ldo6 + vin7-supply: Input supply for ldo7 + +Optional properties: +- interrupt-parent : Specifies the reference to the interrupt controller. +- interrupts : IRQ line information. +- dlg,cs-gpios : Specify a valid GPIO for chip select + +Sub-nodes: +- regulators : This node defines the settings for the regulators. + The content of the sub-node is defined by the standard binding + for regulators; see regulator.txt. + + The SLG51000 regulators are bound using their names listed below: + ldo1 + ldo2 + ldo3 + ldo4 + ldo5 + ldo6 + ldo7 + +Optional properties for regulators: +- enable-gpios : Specify a valid GPIO for platform control of the regulator. + +Example: + pmic: slg51000@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + + regulators { + ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt new file mode 100644 index 000000000..63dc07877 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt @@ -0,0 +1,43 @@ +Spreadtrum SC2731 Voltage regulators + +The SC2731 integrates low-voltage and low quiescent current DCDC/LDO. +14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have +their own bypass (power-down) control signals. External tantalum or MLCC +ceramic capacitors are recommended to use with these LDOs. + +Required properties: + - compatible: should be "sprd,sc27xx-regulator". + +List of regulators provided by this controller. It is named according to +its regulator type, BUCK_<name> and LDO_<name>. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + BUCK_CPU0, BUCK_CPU1, BUCK_RF +LDO: + LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE, + LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON, + LDO_CAMIO, LDO_SRAM + +Example: + regulators { + compatible = "sprd,sc27xx-regulator"; + + vddarm0: BUCK_CPU0 { + regulator-name = "vddarm0"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + vddcama0: LDO_CAMA0 { + regulator-name = "vddcama0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml new file mode 100644 index 000000000..9f1c70381 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 booster for ADC analog input switches bindings + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +description: | + Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used + to supply ADC analog input switches. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + enum: + - st,stm32h7-booster + - st,stm32mp1-booster + + st,syscfg: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: phandle to system configuration controller. + + vdda-supply: + description: phandle to the vdda input analog voltage. + +required: + - compatible + - st,syscfg + - vdda-supply + +unevaluatedProperties: false + +examples: + - | + regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + vdda-supply = <&vdda>; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml new file mode 100644 index 000000000..3cd4a254e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Voltage reference buffer bindings + +description: | + Some STM32 devices embed a voltage reference buffer which can be used as + voltage reference for ADCs, DACs and also as voltage reference for external + components through the dedicated VREF+ pin. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: st,stm32-vrefbuf + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vdda-supply: + description: phandle to the vdda input analog voltage. + +required: + - compatible + - reg + - clocks + - vdda-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + vrefbuf@50025000 { + compatible = "st,stm32-vrefbuf"; + reg = <0x50025000 0x8>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + clocks = <&rcc VREF>; + vdda-supply = <&vdda>; + }; + +... + diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml new file mode 100644 index 000000000..e6322bc3e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32MP1 PWR voltage regulators + +maintainers: + - Pascal Paillet <p.paillet@st.com> + +properties: + compatible: + const: st,stm32mp1,pwr-reg + + reg: + maxItems: 1 + + vdd-supply: + description: Input supply phandle(s) for vdd input + + vdd_3v3_usbfs-supply: + description: Input supply phandle(s) for vdd_3v3_usbfs input + +patternProperties: + "^(reg11|reg18|usb33)$": + type: object + + $ref: "regulator.yaml#" + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + + reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt b/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt new file mode 100644 index 000000000..39a8ca73f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt @@ -0,0 +1,23 @@ +SY8106A Voltage regulator + +Required properties: +- compatible: Must be "silergy,sy8106a" +- reg: I2C slave address - must be <0x65> +- silergy,fixed-microvolt - the voltage when I2C regulating is disabled (set + by external resistor like a fixed voltage) + +Any property defined as part of the core regulator binding, defined in +./regulator.txt, can also be used. + +Example: + + sy8106a { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "sy8106a-vdd"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt new file mode 100644 index 000000000..6a23ad9ac --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt @@ -0,0 +1,132 @@ +Adaptive Body Bias(ABB) SoC internal LDO regulator for Texas Instruments SoCs + +Required Properties: +- compatible: Should be one of: + - "ti,abb-v1" for older SoCs like OMAP3 + - "ti,abb-v2" for newer SoCs like OMAP4, OMAP5 + - "ti,abb-v3" for a generic definition where setup and control registers are + provided (example: DRA7) +- reg: Address and length of the register set for the device. It contains + the information of registers in the same order as described by reg-names +- reg-names: Should contain the reg names + - "base-address" - contains base address of ABB module (ti,abb-v1,ti,abb-v2) + - "control-address" - contains control register address of ABB module (ti,abb-v3) + - "setup-address" - contains setup register address of ABB module (ti,abb-v3) + - "int-address" - contains address of interrupt register for ABB module + (also see Optional properties) +- #address-cells: should be 0 +- #size-cells: should be 0 +- clocks: should point to the clock node used by ABB module +- ti,settling-time: Settling time in uSecs from SoC documentation for ABB module + to settle down(target time for SR2_WTCNT_VALUE). +- ti,clock-cycles: SoC specific data about count of system ti,clock-cycles used for + computing settling time from SoC Documentation for ABB module(clock + cycles for SR2_WTCNT_VALUE). +- ti,tranxdone-status-mask: Mask to the int-register to write-to-clear mask + indicating LDO tranxdone (operation complete). +- ti,abb_info: An array of 6-tuples u32 items providing information about ABB + configuration needed per operational voltage of the device. + Each item consists of the following in the same order: + volt: voltage in uV - Only used to index ABB information. + ABB mode: one of the following: + 0-bypass + 1-Forward Body Bias(FBB) + 3-Reverse Body Bias(RBB) + efuse: (see Optional properties) + RBB enable efuse Mask: (See Optional properties) + FBB enable efuse Mask: (See Optional properties) + Vset value efuse Mask: (See Optional properties) + + NOTE: If more than 1 entry is present, then regulator is setup to change + voltage, allowing for various modes to be selected indexed off + the regulator. Further, ABB LDOs are considered always-on by + default. + +Optional Properties: +- reg-names: In addition to the required properties, the following are optional + - "efuse-address" - Contains efuse base address used to pick up ABB info. + - "ldo-address" - Contains address of ABB LDO override register. + "efuse-address" is required for this. +- ti,ldovbb-vset-mask - Required if ldo-address is set, mask for LDO override + register to provide override vset value. +- ti,ldovbb-override-mask - Required if ldo-address is set, mask for LDO + override register to enable override vset value. +- ti,abb_opp_sel: Addendum to the description in required properties + efuse: Mandatory if 'efuse-address' register is defined. Provides offset + from efuse-address to pick up ABB characteristics. Set to 0 if + 'efuse-address' is not defined. + RBB enable efuse Mask: Optional if 'efuse-address' register is defined. + 'ABB mode' is force set to RBB mode if value at "efuse-address" + + efuse maps to RBB mask. Set to 0 to ignore this. + FBB enable efuse Mask: Optional if 'efuse-address' register is defined. + 'ABB mode' is force set to FBB mode if value at "efuse-address" + + efuse maps to FBB mask (valid only if RBB mask does not match) + Set to 0 to ignore this. + Vset value efuse Mask: Mandatory if ldo-address is set. Picks up from + efuse the value to set in 'ti,ldovbb-vset-mask' at ldo-address. + +Example #1: Simplest configuration (no efuse data, hard coded ABB table): +abb_x: regulator-abb-x { + compatible = "ti,abb-v1"; + regulator-name = "abb_x"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x483072f0 0x8>, <0x48306818 0x4>; + reg-names = "base-address", "int-address"; + ti,tranxdone-status-mask = <0x4000000>; + clocks = <&sysclk>; + ti,settling-time = <30>; + ti,clock-cycles = <8>; + ti,abb_info = < + /* uV ABB efuse rbb_m fbb_m vset_m */ + 1012500 0 0 0 0 0 /* Bypass */ + 1200000 3 0 0 0 0 /* RBB mandatory */ + 1320000 1 0 0 0 0 /* FBB mandatory */ + >; +}; + +Example #2: Efuse bits contain ABB mode setting (no LDO override capability) +abb_y: regulator-abb-y { + compatible = "ti,abb-v2"; + regulator-name = "abb_y"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, <0x4A002268 0x8>; + reg-names = "base-address", "int-address", "efuse-address"; + ti,tranxdone-status-mask = <0x4000000>; + clocks = <&sysclk>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + ti,abb_info = < + /* uV ABB efuse rbb_m fbb_m vset_m */ + 975000 0 0 0 0 0 /* Bypass */ + 1012500 0 0 0x40000 0 0 /* RBB optional */ + 1200000 0 0x4 0 0x40000 0 /* FBB optional */ + 1320000 1 0 0 0 0 /* FBB mandatory */ + >; +}; + +Example #3: Efuse bits contain ABB mode setting and LDO override capability +abb_z: regulator-abb-z { + compatible = "ti,abb-v2"; + regulator-name = "abb_z"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a002194 0x8>, <0x4ae0C314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x8000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + clocks = <&sysclk>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + ti,abb_info = < + /* uV ABB efuse rbb_m fbb_m vset_m */ + 975000 0 0 0 0 0 /* Bypass */ + 1200000 0 0x4 0 0x40000 0x1f00 /* FBB optional, vset */ + >; +}; diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt new file mode 100644 index 000000000..2f7e44a96 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt @@ -0,0 +1,27 @@ +TPS51632 Voltage regulators + +Required properties: +- compatible: Must be "ti,tps51632" +- reg: I2C slave address + +Optional properties: +- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. +- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this + will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage + step is 10mV as per datasheet. + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + tps51632 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "tps51632-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + ti,enable-pwm-dvfs; + ti,dvfs-step-20mV; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt new file mode 100644 index 000000000..1b20c3dbc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt @@ -0,0 +1,44 @@ +TPS62360 Voltage regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps62360" + "ti,tps62361", + "ti,tps62362", + "ti,tps62363", +- reg: I2C slave address + +Optional properties: +- ti,enable-vout-discharge: Enable output discharge. This is boolean value. +- ti,enable-pull-down: Enable pull down. This is boolean value. +- ti,vsel0-gpio: GPIO for controlling VSEL0 line. + If this property is missing, then assume that there is no GPIO + for vsel0 control. +- ti,vsel1-gpio: Gpio for controlling VSEL1 line. + If this property is missing, then assume that there is no GPIO + for vsel1 control. +- ti,vsel0-state-high: Initial state of vsel0 input is high. + If this property is missing, then assume the state as low (0). +- ti,vsel1-state-high: Initial state of vsel1 input is high. + If this property is missing, then assume the state as low (0). + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + abc: tps62360 { + compatible = "ti,tps62361"; + reg = <0x60>; + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on + ti,vsel0-gpio = <&gpio1 16 0>; + ti,vsel1-gpio = <&gpio1 17 0>; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-pull-down; + ti,enable-force-pwm; + ti,enable-vout-discharge; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65023.txt b/Documentation/devicetree/bindings/regulator/tps65023.txt new file mode 100644 index 000000000..a4714e4da --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65023.txt @@ -0,0 +1,60 @@ +TPS65023 family of regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps65020", + "ti,tps65021", + "ti,tps65023", +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: VDCDC[1-3] and LDO[1-2] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. The definition for each of + these nodes is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65023@48 { + compatible = "ti,tps65023"; + reg = <0x48>; + + regulators { + VDCDC1 { + regulator-name = "vdd_mpu"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + VDCDC2 { + regulator-name = "vdd_core"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDCDC3 { + regulator-name = "vdd_io"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "vdd_usb18"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO2 { + regulator-name = "vdd_usb33"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt new file mode 100644 index 000000000..ae326f263 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -0,0 +1,126 @@ +TPS65090 regulators + +Required properties: +- compatible: "ti,tps65090" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + dcdc[1-3], fet[1-7] and ldo[1-2] respectively. +- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively. +- infet[1-7]-supply: The input supply for FET[1-7] respectively. +- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively. + +Optional properties: +- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. + If DCDCs are externally controlled then this property should be there. +- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. + If DCDCs are externally controlled and if it is from GPIO then GPIO + number should be provided. If it is externally controlled and no GPIO + entry then driver will just configure this rails as external control + and will not provide any enable/disable APIs. +- ti,overcurrent-wait: This is applicable to FET registers, which have a + poorly defined "overcurrent wait" field. If this property is present it + should be between 0 - 3. If this property isn't present we won't touch the + "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65090@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + interrupts = <0 88 0x4>; + + vsys1-supply = <&some_reg>; + vsys2-supply = <&some_reg>; + vsys3-supply = <&some_reg>; + infet1-supply = <&some_reg>; + infet2-supply = <&some_reg>; + infet3-supply = <&some_reg>; + infet4-supply = <&some_reg>; + infet5-supply = <&some_reg>; + infet6-supply = <&some_reg>; + infet7-supply = <&some_reg>; + vsys-l1-supply = <&some_reg>; + vsys-l2-supply = <&some_reg>; + + regulators { + dcdc1 { + regulator-name = "dcdc1"; + regulator-boot-on; + regulator-always-on; + ti,enable-ext-control; + dcdc-ext-control-gpios = <&gpio 10 0>; + }; + + dcdc2 { + regulator-name = "dcdc2"; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3 { + regulator-name = "dcdc3"; + regulator-boot-on; + regulator-always-on; + }; + + fet1 { + regulator-name = "fet1"; + regulator-boot-on; + regulator-always-on; + }; + + fet2 { + regulator-name = "fet2"; + regulator-boot-on; + regulator-always-on; + }; + + fet3 { + regulator-name = "fet3"; + regulator-boot-on; + regulator-always-on; + }; + + fet4 { + regulator-name = "fet4"; + regulator-boot-on; + regulator-always-on; + }; + + fet5 { + regulator-name = "fet5"; + regulator-boot-on; + regulator-always-on; + }; + + fet6 { + regulator-name = "fet6"; + regulator-boot-on; + regulator-always-on; + }; + + fet7 { + regulator-name = "fet7"; + regulator-boot-on; + regulator-always-on; + }; + + ldo1 { + regulator-name = "ldo1"; + regulator-boot-on; + regulator-always-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt new file mode 100644 index 000000000..3a3505520 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt @@ -0,0 +1,46 @@ +TPS65132 regulators + +Required properties: +- compatible: "ti,tps65132" +- reg: I2C slave address + +Optional Subnode: +Device supports two regulators OUTP and OUTN. A sub node within the + device node describe the properties of these regulators. The sub-node + names must be as follows: + -For regulator outp, the sub node name should be "outp". + -For regulator outn, the sub node name should be "outn". + +-enable-gpios:(active high, output) Regulators are controlled by the input pins. + If it is connected to GPIO through host system then provide the + gpio number as per gpio.txt. +-active-discharge-gpios: (active high, output) Some configurations use delay mechanisms + on the enable pin, to keep the regulator enabled for some time after + the enable signal goes low. This GPIO is used to actively discharge + the delay mechanism. Requires specification of ti,active-discharge-time-us +-ti,active-discharge-time-us: how long the active discharge gpio should be + asserted for during active discharge, in microseconds. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65132@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 23 0>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + regulator-active-discharge = <0>; + enable-gpios = <&gpio 40 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt new file mode 100644 index 000000000..4f05d208c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -0,0 +1,78 @@ +TPS65217 family of regulators + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-3] and ldo[1-4] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle. + + The valid names for regulators are: + tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4 + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps: tps@24 { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + regulators { + dcdc1_reg: dcdc1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: dcdc2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: dcc3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt new file mode 100644 index 000000000..54aded3b7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65218.txt @@ -0,0 +1,83 @@ +TPS65218 family of regulators + +Required properties: +- compatible: "ti,tps65218" +- reg: I2C slave address + +- List of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-6] and ldo1 +- This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at ./regulator.txt. + + The valid names for regulators are: + tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4, + regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3. + Each regulator is defined using the standard binding for regulators. + +Example: +tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc5: regulator-dcdc5 { + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc6: regulator-dcdc6 { + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ls2: regulator-ls2 { + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; + }; + + ls3: regulator-ls3 { + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt new file mode 100644 index 000000000..8b40cac24 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -0,0 +1,135 @@ +TPS6586x family of regulators + +Required properties: +- compatible: "ti,tps6586x" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- #gpio-cells: number of cells to describe a GPIO +- gpio-controller: mark the device as a GPIO controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + sys, sm[0-2], ldo[0-9] and ldo_rtc +- sys-supply: The input supply for SYS. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. +- vinldo01-supply: The input supply for the LDO1 and LDO2 +- vinldo23-supply: The input supply for the LDO2 and LDO3 +- vinldo4-supply: The input supply for the LDO4 +- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 +- vinldo9-supply: The input supply for the LDO9 + +Optional properties: +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + +Each regulator is defined using the standard binding for regulators. + +Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver + take care of making proper parent child relationship. + +Example: + + pmu: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 88 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + ti,system-power-controller; + + sys-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; + vinldo01-supply = <...>; + vinldo23-supply = <...>; + vinldo4-supply = <...>; + vinldo678-supply = <...>; + vinldo9-supply = <...>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-boot-on; + regulator-always-on; + }; + + sm0_reg: sm0 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sm1_reg: sm1 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <4550000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0_reg: ldo0 { + regulator-name = "PCIE CLK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2475000>; + }; + + ldo5_reg: ldo5 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt new file mode 100644 index 000000000..549f80436 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt @@ -0,0 +1,80 @@ +TWL family of regulators + +Required properties: +For twl6030 regulators/LDOs +- compatible: + - "ti,twl6030-vaux1" for VAUX1 LDO + - "ti,twl6030-vaux2" for VAUX2 LDO + - "ti,twl6030-vaux3" for VAUX3 LDO + - "ti,twl6030-vmmc" for VMMC LDO + - "ti,twl6030-vpp" for VPP LDO + - "ti,twl6030-vusim" for VUSIM LDO + - "ti,twl6030-vana" for VANA LDO + - "ti,twl6030-vcxio" for VCXIO LDO + - "ti,twl6030-vdac" for VDAC LDO + - "ti,twl6030-vusb" for VUSB LDO + - "ti,twl6030-v1v8" for V1V8 LDO + - "ti,twl6030-v2v1" for V2V1 LDO + - "ti,twl6030-vdd1" for VDD1 SMPS + - "ti,twl6030-vdd2" for VDD2 SMPS + - "ti,twl6030-vdd3" for VDD3 SMPS +For twl6032 regulators/LDOs +- compatible: + - "ti,twl6032-ldo1" for LDO1 LDO + - "ti,twl6032-ldo2" for LDO2 LDO + - "ti,twl6032-ldo3" for LDO3 LDO + - "ti,twl6032-ldo4" for LDO4 LDO + - "ti,twl6032-ldo5" for LDO5 LDO + - "ti,twl6032-ldo6" for LDO6 LDO + - "ti,twl6032-ldo7" for LDO7 LDO + - "ti,twl6032-ldoln" for LDOLN LDO + - "ti,twl6032-ldousb" for LDOUSB LDO + - "ti,twl6032-smps3" for SMPS3 SMPS + - "ti,twl6032-smps4" for SMPS4 SMPS + - "ti,twl6032-vio" for VIO SMPS +For twl4030 regulators/LDOs +- compatible: + - "ti,twl4030-vaux1" for VAUX1 LDO + - "ti,twl4030-vaux2" for VAUX2 LDO + - "ti,twl5030-vaux2" for VAUX2 LDO + - "ti,twl4030-vaux3" for VAUX3 LDO + - "ti,twl4030-vaux4" for VAUX4 LDO + - "ti,twl4030-vmmc1" for VMMC1 LDO + - "ti,twl4030-vmmc2" for VMMC2 LDO + - "ti,twl4030-vpll1" for VPLL1 LDO + - "ti,twl4030-vpll2" for VPLL2 LDO + - "ti,twl4030-vsim" for VSIM LDO + - "ti,twl4030-vdac" for VDAC LDO + - "ti,twl4030-vintana2" for VINTANA2 LDO + - "ti,twl4030-vio" for VIO LDO + - "ti,twl4030-vdd1" for VDD1 SMPS + - "ti,twl4030-vdd2" for VDD2 SMPS + - "ti,twl4030-vintana1" for VINTANA1 LDO + - "ti,twl4030-vintdig" for VINTDIG LDO + - "ti,twl4030-vusb1v5" for VUSB1V5 LDO + - "ti,twl4030-vusb1v8" for VUSB1V8 LDO + - "ti,twl4030-vusb3v1" for VUSB3V1 LDO + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt +For twl4030 regulators/LDOs: + - regulator-initial-mode: + - 0x08 - Sleep mode, the nominal output voltage is maintained with low power + consumption with low load current capability. + - 0x0e - Active mode, the regulator can deliver its nominal output voltage + with full-load current capability. + +Example: + + xyz: regulator@0 { + compatible = "ti,twl6030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + +For twl6030 regulators/LDOs: + + - ti,retain-on-reset: Does not turn off the supplies during warm + reset. Could be needed for VMMC, as TWL6030 + reset sequence for this signal does not comply + with the SD specification. diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt new file mode 100644 index 000000000..94fd38b0d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt @@ -0,0 +1,58 @@ +Socionext UniPhier Regulator Controller + +This describes the devicetree bindings for regulator controller implemented +on Socionext UniPhier SoCs. + +USB3 Controller +--------------- + +This regulator controls VBUS and belongs to USB3 glue layer. Before using +the regulator, it is necessary to control the clocks and resets to enable +this layer. These clocks and resets should be described in each property. + +Required properties: +- compatible: Should be + "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC + "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC + "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC + "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC +- reg: Specifies offset and length of the register set for the device. +- clocks: A list of phandles to the clock gate for USB3 glue layer. + According to the clock-names, appropriate clocks are required. +- clock-names: Should contain + "gio", "link" - for Pro4 and Pro5 SoCs + "link" - for others +- resets: A list of phandles to the reset control for USB3 glue layer. + According to the reset-names, appropriate resets are required. +- reset-names: Should contain + "gio", "link" - for Pro4 and Pro5 SoCs + "link" - for others + +See Documentation/devicetree/bindings/regulator/regulator.txt +for more details about the regulator properties. + +Example: + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_vbus0: regulators@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + phy { + ... + phy-supply = <&usb_vbus0>; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt new file mode 100644 index 000000000..601328d7f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vctrl.txt @@ -0,0 +1,49 @@ +Bindings for Voltage controlled regulators +========================================== + +Required properties: +-------------------- +- compatible : must be "vctrl-regulator". +- regulator-min-microvolt : smallest voltage consumers may set +- regulator-max-microvolt : largest voltage consumers may set +- ctrl-supply : The regulator supplying the control voltage. +- ctrl-voltage-range : an array of two integer values describing the range + (min/max) of the control voltage. The values specify + the control voltage needed to generate the corresponding + regulator-min/max-microvolt output voltage. + +Optional properties: +-------------------- +- ovp-threshold-percent : overvoltage protection (OVP) threshold of the + regulator in percent. Some regulators have an OVP + circuitry which shuts down the regulator when the + actual output voltage deviates beyond a certain + margin from the expected value for a given control + voltage. On larger voltage decreases this can occur + undesiredly since the output voltage does not adjust + inmediately to changes in the control voltage. To + avoid this situation the vctrl driver breaks down + larger voltage decreases into multiple steps, where + each step is within the OVP threshold. +- min-slew-down-rate : Describes how slowly the regulator voltage will decay + down in the worst case (lightest expected load). + Specified in uV / us (like main regulator ramp rate). + This value is required when ovp-threshold-percent is + specified. + +Example: + + vctrl-reg { + compatible = "vctrl-regulator"; + regulator-name = "vctrl_reg"; + + ctrl-supply = <&ctrl_reg>; + + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + + ctrl-voltage-range = <200000 500000>; + + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt new file mode 100644 index 000000000..d775f7248 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vexpress.txt @@ -0,0 +1,32 @@ +Versatile Express voltage regulators +------------------------------------ + +Requires node properties: +- "compatible" value: "arm,vexpress-volt" +- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg + (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + for more details) + +Required regulator properties: +- "regulator-name" +- "regulator-always-on" + +Optional regulator properties: +- "regulator-min-microvolt" +- "regulator-max-microvolt" + +See Documentation/devicetree/bindings/regulator/regulator.txt +for more details about the regulator properties. + +When no "regulator-[min|max]-microvolt" properties are defined, +the device is treated as fixed (or rather "read-only") regulator. + +Example: + volt@0 { + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "Cores"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml new file mode 100644 index 000000000..6f45582c9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ4019 VQMMC SD LDO regulator + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller, + in order to support both 1.8 and 3V I/O voltage levels an LDO + controller is also embedded. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: qcom,vqmmc-ipq4019-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml new file mode 100644 index 000000000..7b4ae5d23 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona/Madera class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + + This document lists regulator specific bindings, see the primary binding + document. For Wolfson Microelectronic Arizona codecs ../mfd/wlf,arizona.yaml + and for Cirrus Logic Madera codecs ../mfd/madera.txt + +properties: + wlf,ldoena: + description: + GPIO specifier for the GPIO controlling LDOENA. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + maxItems: 1 + + ldo1: + description: + Initial data for the LDO1 regulator. + $ref: "regulator.yaml#" + type: object + + micvdd: + description: + Initial data for the MICVDD regulator. + $ref: "regulator.yaml#" + type: object + +additionalProperties: true |