summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/rtc/isil,isl1208.txt')
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl1208.txt38
1 files changed, 38 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
new file mode 100644
index 000000000..51f003006
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
@@ -0,0 +1,38 @@
+Intersil ISL1209/19 I2C RTC/Alarm chip with event in
+
+ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the
+ISL1208 and ISL1218 do not. They are all use the same driver with the bindings
+described here, with chip specific properties as noted.
+
+Required properties supported by the device:
+ - "compatible": Should be one of the following:
+ - "isil,isl1208"
+ - "isil,isl1209"
+ - "isil,isl1218"
+ - "isil,isl1219"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+ - "interrupt-names": list which may contains "irq" and "evdet"
+ evdet applies to isl1209 and isl1219 only
+ - "interrupts": list of interrupts for "irq" and "evdet"
+ evdet applies to isl1209 and isl1219 only
+ - "isil,ev-evienb": Enable or disable internal pull on EVIN pin
+ Applies to isl1209 and isl1219 only
+ Possible values are 0 and 1
+ Value 0 enables internal pull-up on evin pin, 1 disables it.
+ Default will leave the non-volatile configuration of the pullup
+ as is.
+
+Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin
+connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin.
+
+ isl1219: rtc@68 {
+ compatible = "isil,isl1219";
+ reg = <0x68>;
+ interrupt-names = "irq", "evdet";
+ interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
+ <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
+ isil,ev-evienb = <1>;
+ };
+