diff options
Diffstat (limited to '')
76 files changed, 2522 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt new file mode 100644 index 000000000..2405e35a1 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -0,0 +1,31 @@ +Abracon ABX80X I2C ultra low power RTC/Alarm chip + +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 +is the superset of ab180x. + +Required properties: + + - "compatible": should one of: + "abracon,abx80x" + "abracon,ab0801" + "abracon,ab0803" + "abracon,ab0804" + "abracon,ab0805" + "abracon,ab1801" + "abracon,ab1803" + "abracon,ab1804" + "abracon,ab1805" + "microcrystal,rv1805" + Using "abracon,abx80x" will enable chip autodetection. + - "reg": I2C bus address of the device + +Optional properties: + +The abx804 and abx805 have a trickle charger that is able to charge the +connected battery or supercap. Both the following properties have to be defined +and valid to enable charging: + + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output + resistor, the other values are in kOhm. diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml new file mode 100644 index 000000000..478b0234e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/allwinner,sun4i-a10-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 RTC Device Tree Bindings + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-rtc + - allwinner,sun7i-a20-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + rtc: rtc@1c20d00 { + compatible = "allwinner,sun4i-a10-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml new file mode 100644 index 000000000..37c2a601c --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/allwinner,sun6i-a31-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 RTC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + compatible: + oneOf: + - const: allwinner,sun6i-a31-rtc + - const: allwinner,sun8i-a23-rtc + - const: allwinner,sun8i-h3-rtc + - const: allwinner,sun8i-r40-rtc + - const: allwinner,sun8i-v3-rtc + - const: allwinner,sun50i-h5-rtc + - items: + - const: allwinner,sun50i-a64-rtc + - const: allwinner,sun8i-h3-rtc + - const: allwinner,sun50i-h6-rtc + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: RTC Alarm 0 + - description: RTC Alarm 1 + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 3 + description: + The RTC provides up to three clocks + - the Low Frequency Oscillator or LOSC, at index 0, + - the Low Frequency Oscillator External output (X32KFOUT in + the datasheet), at index 1, + - the Internal Oscillator, at index 2. + +allOf: + - $ref: "rtc.yaml#" + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-rtc + + then: + properties: + clock-output-names: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a23-rtc + - allwinner,sun8i-r40-rtc + - allwinner,sun8i-v3-rtc + + then: + properties: + clock-output-names: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-rtc + - allwinner,sun50i-h5-rtc + + then: + properties: + clock-output-names: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-rtc + + then: + properties: + clock-output-names: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-r40-rtc + + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 + + else: + properties: + interrupts: + minItems: 2 + maxItems: 2 + +required: + - "#clock-cells" + - compatible + - reg + - interrupts + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + rtc: rtc@1f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x400>; + interrupts = <0 40 4>, <0 41 4>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt new file mode 100644 index 000000000..76ebca568 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt @@ -0,0 +1,19 @@ +* Alphascale asm9260 SoC Real Time Clock + +Required properties: +- compatible: Should be "alphascale,asm9260-rtc" +- reg: Physical base address of the controller and length + of memory mapped region. +- interrupts: IRQ line for the RTC. +- clocks: Reference to the clock entry. +- clock-names: should contain: + * "ahb" for the SoC RTC clock + +Example: +rtc0: rtc@800a0000 { + compatible = "alphascale,asm9260-rtc"; + reg = <0x800a0000 0x100>; + clocks = <&acc CLKID_AHB_RTC>; + clock-names = "ahb"; + interrupts = <2>; +}; diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt new file mode 100644 index 000000000..c3c9a1226 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt @@ -0,0 +1,24 @@ +* Real Time Clock of the Armada 38x/7K/8K SoCs + +RTC controller for the Armada 38x, 7K and 8K SoCs + +Required properties: +- compatible : Should be one of the following: + "marvell,armada-380-rtc" for Armada 38x SoC + "marvell,armada-8k-rtc" for Aramda 7K/8K SoCs +- reg: a list of base address and size pairs, one for each entry in + reg-names +- reg names: should contain: + * "rtc" for the RTC registers + * "rtc-soc" for the SoC related registers and among them the one + related to the interrupt. +- interrupts: IRQ line for the RTC. + +Example: + +rtc@a3800 { + compatible = "marvell,armada-380-rtc"; + reg = <0xa3800 0x20>, <0x184a0 0x0c>; + reg-names = "rtc", "rtc-soc"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml new file mode 100644 index 000000000..02bbfe726 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/atmel,at91rm9200-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel AT91 RTC Device Tree Bindings + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + enum: + - atmel,at91rm9200-rtc + - atmel,at91sam9x5-rtc + - atmel,sama5d4-rtc + - atmel,sama5d2-rtc + - microchip,sam9x60-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + rtc@fffffe00 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffe00 0x100>; + interrupts = <1 4 7>; + clocks = <&clk32k>; + }; +... diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt new file mode 100644 index 000000000..3f0e2a595 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt @@ -0,0 +1,25 @@ +Atmel AT91SAM9260 Real Time Timer + +Required properties: +- compatible: should be one of the following: + - "atmel,at91sam9260-rtt" + - "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt" +- reg: should encode the memory region of the RTT controller +- interrupts: rtt alarm/event interrupt +- clocks: should contain the 32 KHz slow clk that will drive the RTT block. +- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store + the time base when the RTT is used as an RTC. + The first cell should point to the GPBR node and the second one + encode the offset within the GPBR block (or in other words, the + GPBR register used to store the time base). + + +Example: + +rtt@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 4 7>; + clocks = <&clk32k>; + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt new file mode 100644 index 000000000..d946f2850 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt @@ -0,0 +1,20 @@ +Broadcom STB wake-up Timer + +The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the +ability to wake up the system from low-power suspend/standby modes. + +Required properties: +- compatible : should contain "brcm,brcmstb-waketimer" +- reg : the register start and length for the WKTMR block +- interrupts : The TIMER interrupt +- clocks : The phandle to the UPG fixed clock (27Mhz domain) + +Example: + +waketimer@f0411580 { + compatible = "brcm,brcmstb-waketimer"; + reg = <0xf0411580 0x14>; + interrupts = <0x3>; + interrupt-parent = <&aon_pm_l2_intc>; + clocks = <&upg_fixed>; +}; diff --git a/Documentation/devicetree/bindings/rtc/cdns,rtc.txt b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt new file mode 100644 index 000000000..14a04487b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt @@ -0,0 +1,25 @@ +Cadence Real Time Clock + +The Cadence RTC controller with date, time and alarm capabilities. +The alarm may wake the system from low-power state. + +Required properties: +- compatible: Should be "cdns,rtc-r109v3" +- reg: Specifies base physical address and size of the register area. +- interrupts: A single interrupt specifier. +- clocks: Must contain two entries: + - pclk: APB registers clock + - ref_clk: reference 1Hz or 100Hz clock, depending on IP configuration + See ../clocks/clock-bindings.txt for details. + +Example: + rtc0: rtc@fd080000 { + compatible = "cdns,rtc-r109v3"; + reg = <0xfd080000 0x1000>; + + clock-names = "pclk", "ref_clk"; + clocks = <&sysclock>, <&refclock>; + + interrupt-parent = <&gic>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt b/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt new file mode 100644 index 000000000..45750ff31 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt @@ -0,0 +1,18 @@ +Motorola CPCAP PMIC RTC +----------------------- + +This module is part of the CPCAP. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt. + +Requires node properties: +- compatible: should contain "motorola,cpcap-rtc" +- interrupts: An interrupt specifier for alarm and 1 Hz irq + +Example: + +&cpcap { + cpcap_rtc: rtc { + compatible = "motorola,cpcap-rtc"; + interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt new file mode 100644 index 000000000..9882b819f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt @@ -0,0 +1,18 @@ +* Dallas DS1390 SPI Serial Real-Time Clock + +Required properties: +- compatible: Should contain "dallas,ds1390". +- reg: SPI address for chip + +Optional properties: +- trickle-resistor-ohms : Selected resistor for trickle charger + Values usable for ds1390 are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled +Example: + ds1390: rtc@0 { + compatible = "dallas,ds1390"; + trickle-resistor-ohms = <250>; + reg = <0>; + }; diff --git a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt new file mode 100644 index 000000000..d46498601 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt @@ -0,0 +1,17 @@ +Conexant Digicolor Real Time Clock controller + +This binding currently supports the CX92755 SoC. + +Required properties: +- compatible: should be "cnxt,cx92755-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: rtc alarm interrupt + +Example: + + rtc@f0000c30 { + compatible = "cnxt,cx92755-rtc"; + reg = <0xf0000c30 0x18>; + interrupts = <25>; + }; diff --git a/Documentation/devicetree/bindings/rtc/epson,rtc7301.txt b/Documentation/devicetree/bindings/rtc/epson,rtc7301.txt new file mode 100644 index 000000000..5f9df3f14 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/epson,rtc7301.txt @@ -0,0 +1,16 @@ +EPSON TOYOCOM RTC-7301SF/DG + +Required properties: + +- compatible: Should be "epson,rtc7301sf" or "epson,rtc7301dg" +- reg: Specifies base physical address and size of the registers. +- interrupts: A single interrupt specifier. + +Example: + +rtc: rtc@44a00000 { + compatible = "epson,rtc7301dg"; + reg = <0x44a00000 0x10000>; + interrupt-parent = <&axi_intc_0>; + interrupts = <3 2>; +}; diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt new file mode 100644 index 000000000..3dc313e01 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt @@ -0,0 +1,39 @@ +Epson RX6110 Real Time Clock +============================ + +The Epson RX6110 can be used with SPI or I2C busses. The kind of +bus depends on the SPISEL pin and can not be configured via software. + +I2C mode +-------- + +Required properties: + - compatible: should be: "epson,rx6110" + - reg : the I2C address of the device for I2C + +Example: + + rtc: rtc@32 { + compatible = "epson,rx6110" + reg = <0x32>; + }; + +SPI mode +-------- + +Required properties: + - compatible: should be: "epson,rx6110" + - reg: chip select number + - spi-cs-high: RX6110 needs chipselect high + - spi-cpha: RX6110 works with SPI shifted clock phase + - spi-cpol: RX6110 works with SPI inverse clock polarity + +Example: + + rtc: rtc@3 { + compatible = "epson,rx6110" + reg = <3> + spi-cs-high; + spi-cpha; + spi-cpol; + }; diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.txt b/Documentation/devicetree/bindings/rtc/epson,rx8900.txt new file mode 100644 index 000000000..3f61e516e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/epson,rx8900.txt @@ -0,0 +1,22 @@ +Real Time Clock driver for: + - Epson RX8900 + - Micro Crystal rv8803 + +Required properties: +- compatible: should be: "microcrystal,rv8803" or "epson,rx8900" +- reg : the I2C address of the device for I2C + +Optional properties: +- epson,vdet-disable : boolean, if present will disable voltage detector. + Should be set if no backup battery is used. +- trickle-diode-disable : boolean, if present will disable internal trickle + charger diode + +Example: + + rtc: rtc@32 { + compatible = "epson,rx8900" + reg = <0x32>; + epson,vdet-disable; + trickle-diode-disable; + }; diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt new file mode 100644 index 000000000..e3938f5e0 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt @@ -0,0 +1,28 @@ +* Faraday Technology FTRTC010 Real Time Clock + +This RTC appears in for example the Storlink Gemini family of +SoCs. + +Required properties: +- compatible : Should be one of: + "faraday,ftrtc010" + "cortina,gemini-rtc", "faraday,ftrtc010" + +Optional properties: +- clocks: when present should contain clock references to the + PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and + says the clock should be 1 Hz, but implementers actually seem + to choose different clocks here, like Cortina who chose + 32768 Hz (a typical low-power clock). +- clock-names: should name the clocks "PCLK" and "EXTCLK" + respectively. + +Examples: + +rtc@45000000 { + compatible = "cortina,gemini-rtc"; + reg = <0x45000000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&foo 0>, <&foo 1>; + clock-names = "PCLK", "EXTCLK"; +}; diff --git a/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt b/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt new file mode 100644 index 000000000..634312dd9 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt @@ -0,0 +1,17 @@ +Android Goldfish RTC + +Android Goldfish RTC device used by Android emulator. + +Required properties: + +- compatible : should contain "google,goldfish-rtc" +- reg : <registers mapping> +- interrupts : <interrupt mapping> + +Example: + + goldfish_timer@9020000 { + compatible = "google,goldfish-rtc"; + reg = <0x9020000 0x1000>; + interrupts = <0x3>; + }; diff --git a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt new file mode 100644 index 000000000..a8934fe2a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt @@ -0,0 +1,30 @@ +Haoyu Microelectronics HYM8563 Real Time Clock + +The HYM8563 provides basic rtc and alarm functionality +as well as a clock output of up to 32kHz. + +Required properties: +- compatible: should be: "haoyu,hym8563" +- reg: i2c address +- #clock-cells: the value should be 0 + +Optional properties: +- clock-output-names: From common clock binding +- interrupts: rtc alarm/event interrupt + +Example: + +hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + #clock-cells = <0>; +}; + +device { +... + clocks = <&hym8563>; +... +}; diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml new file mode 100644 index 000000000..06bd73782 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX25 Real Time Clock controller + +maintainers: + - Roland Stigge <stigge@antcom.de> + +properties: + compatible: + const: fsl,imx25-rtc + + reg: + maxItems: 1 + + interrupts: + items: + - description: rtc alarm interrupt + - description: dryice security violation interrupt + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + rtc@53ffc000 { + compatible = "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + interrupts = <25>, <56>; + }; diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml new file mode 100644 index 000000000..60e93e86a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs Real-Time Clock DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4740-rtc + - ingenic,jz4760-rtc + - items: + - const: ingenic,jz4725b-rtc + - const: ingenic,jz4740-rtc + - items: + - enum: + - ingenic,jz4770-rtc + - ingenic,jz4780-rtc + - const: ingenic,jz4760-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: rtc + + system-power-controller: + description: | + Indicates that the RTC is responsible for powering OFF + the system. + type: boolean + + ingenic,reset-pin-assert-time-ms: + minimum: 0 + maximum: 125 + default: 60 + description: | + Reset pin low-level assertion time after wakeup + (assuming RTC clock at 32 kHz) + + ingenic,min-wakeup-pin-assert-time-ms: + minimum: 0 + maximum: 2000 + default: 100 + description: | + Minimum wakeup pin assertion time + (assuming RTC clock at 32 kHz) + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + rtc_dev: rtc@10003000 { + compatible = "ingenic,jz4740-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <15>; + + clocks = <&cgu JZ4740_CLK_RTC>; + clock-names = "rtc"; + }; diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt new file mode 100644 index 000000000..2e0be4519 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt @@ -0,0 +1,28 @@ +ISL12026 I2C RTC/EEPROM + +ISL12026 is an I2C RTC/EEPROM combination device. The RTC and control +registers respond at bus address 0x6f, and the EEPROM array responds +at bus address 0x57. The canonical "reg" value will be for the RTC portion. + +Required properties supported by the device: + + - "compatible": must be "isil,isl12026" + - "reg": I2C bus address of the device (always 0x6f) + +Optional properties: + + - "isil,pwr-bsw": If present PWR.BSW bit must be set to the specified + value for proper operation. + + - "isil,pwr-sbib": If present PWR.SBIB bit must be set to the specified + value for proper operation. + + +Example: + + rtc@6f { + compatible = "isil,isl12026"; + reg = <0x6f>; + isil,pwr-bsw = <0>; + isil,pwr-sbib = <1>; + } diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt new file mode 100644 index 000000000..ff7c43555 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt @@ -0,0 +1,74 @@ +Intersil ISL12057 I2C RTC/Alarm chip + +ISL12057 is a trivial I2C device (it has simple device tree bindings, +consisting of a compatible field, an address and possibly an interrupt +line). + +Nonetheless, it also supports an option boolean property +("wakeup-source") to handle the specific use-case found +on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104 +and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip +(associated with the alarm supported by the driver) is not connected +to the SoC but to a PMIC. It allows the device to be powered up when +RTC alarm rings. In order to mark the device has a wakeup source and +get access to the 'wakealarm' sysfs entry, this specific property can +be set when the IRQ#2 pin of the chip is not connected to the SoC but +can wake up the device. + +Required properties supported by the device: + + - "compatible": must be "isil,isl12057" + - "reg": I2C bus address of the device + +Optional properties: + + - "wakeup-source": mark the chip as a wakeup source, independently of + the availability of an IRQ line connected to the SoC. + + +Example isl12057 node without IRQ#2 pin connected (no alarm support): + + isl12057: isl12057@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + }; + + +Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note +that the pinctrl-related properties below are given for completeness and +may not be required or may be different depending on your system or +SoC, and the main function of the MPP used as IRQ line, i.e. +"interrupt-parent" and "interrupts" are usually sufficient): + + pinctrl { + ... + + rtc_alarm_pin: rtc_alarm_pin { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + ... + + }; + + ... + + isl12057: isl12057@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + pinctrl-0 = <&rtc_alarm_pin>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + + +Example isl12057 node without IRQ#2 pin connected to the SoC but to a +PMIC, allowing the device to be started based on configured alarm: + + isl12057: isl12057@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + wakeup-source; + }; diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt new file mode 100644 index 000000000..51f003006 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt @@ -0,0 +1,38 @@ +Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the +ISL1208 and ISL1218 do not. They are all use the same driver with the bindings +described here, with chip specific properties as noted. + +Required properties supported by the device: + - "compatible": Should be one of the following: + - "isil,isl1208" + - "isil,isl1209" + - "isil,isl1218" + - "isil,isl1219" + - "reg": I2C bus address of the device + +Optional properties: + - "interrupt-names": list which may contains "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "interrupts": list of interrupts for "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "isil,ev-evienb": Enable or disable internal pull on EVIN pin + Applies to isl1209 and isl1219 only + Possible values are 0 and 1 + Value 0 enables internal pull-up on evin pin, 1 disables it. + Default will leave the non-volatile configuration of the pullup + as is. + +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin +connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. + + isl1219: rtc@68 { + compatible = "isil,isl1219"; + reg = <0x68>; + interrupt-names = "irq", "evdet"; + interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; + isil,ev-evienb = <1>; + }; + diff --git a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt new file mode 100644 index 000000000..a87a1e9bc --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt @@ -0,0 +1,15 @@ +* NXP LPC32xx SoC Real Time Clock controller + +Required properties: +- compatible: must be "nxp,lpc3220-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The RTC interrupt + +Example: + + rtc@40024000 { + compatible = "nxp,lpc3220-rtc"; + reg = <0x40024000 0x1000>; + interrupts = <52 0>; + }; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt new file mode 100644 index 000000000..d0f937c35 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt @@ -0,0 +1,12 @@ +* Maxim (Dallas) DS1742/DS1743 Real Time Clock + +Required properties: +- compatible: Should contain "maxim,ds1742". +- reg: Physical base address of the RTC and length of memory + mapped region. + +Example: + rtc: rtc@10000000 { + compatible = "maxim,ds1742"; + reg = <0x10000000 0x800>; + }; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt new file mode 100644 index 000000000..85be53a42 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt @@ -0,0 +1,38 @@ +* Maxim DS3231 Real Time Clock + +Required properties: +- compatible: Should contain "maxim,ds3231". +- reg: I2C address for chip. + +Optional property: +- #clock-cells: Should be 1. +- clock-output-names: + overwrite the default clock names "ds3231_clk_sqw" and "ds3231_clk_32khz". + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: + - 0: square-wave output on the SQW pin + - 1: square-wave output on the 32kHz pin + +- interrupts: rtc alarm/event interrupt. When this property is selected, + clock on the SQW pin cannot be used. + +Example: + +ds3231: ds3231@51 { + compatible = "maxim,ds3231"; + reg = <0x68>; + #clock-cells = <1>; +}; + +device1 { +... + clocks = <&ds3231 0>; +... +}; + +device2 { +... + clocks = <&ds3231 1>; +... +}; diff --git a/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt b/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt new file mode 100644 index 000000000..a59fdd8c2 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt @@ -0,0 +1,11 @@ +* Maxim MCP795 SPI Serial Real-Time Clock + +Required properties: +- compatible: Should contain "maxim,mcp795". +- reg: SPI address for chip + +Example: + mcp795: rtc@0 { + compatible = "maxim,mcp795"; + reg = <0>; + }; diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt new file mode 100644 index 000000000..ba470c56c --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt @@ -0,0 +1,46 @@ +* Maxim/Dallas Semiconductor DS-1302 RTC + +Simple device which could be used to store date/time between reboots. + +The device uses the standard MicroWire half-duplex transfer timing. +Master output is set on low clock and sensed by the RTC on the rising +edge. Master input is set by the RTC on the trailing edge and is sensed +by the master on low clock. + +Required properties: + +- compatible : Should be "maxim,ds1302" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : DS-1302 has 500 kHz if powered at 2.2V, + and 2MHz if powered at 5V. + +- spi-3wire : The device has a shared signal IN/OUT line. + +- spi-lsb-first : DS-1302 requires least significant bit first + transfers. + +- spi-cs-high: DS-1302 has active high chip select line. This is + required unless inverted in hardware. + +Example: + +spi@901c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "icpdas,lp8841-spi-rtc"; + reg = <0x901c 0x1>; + + rtc@0 { + compatible = "maxim,ds1302"; + reg = <0>; + spi-max-frequency = <500000>; + spi-3wire; + spi-lsb-first; + spi-cs-high; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt b/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt new file mode 100644 index 000000000..180b7144b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt @@ -0,0 +1,21 @@ +* Microchip PIC32 Real Time Clock and Calendar + +The RTCC keeps time in hours, minutes, and seconds, and one half second. It +provides a calendar in weekday, date, month, and year. It also provides a +configurable alarm. + +Required properties: +- compatible: should be: "microchip,pic32mzda-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: RTC alarm/event interrupt +- clocks: clock phandle + +Example: + + rtc: rtc@1f8c0000 { + compatible = "microchip,pic32mzda-rtc"; + reg = <0x1f8c0000 0x60>; + interrupts = <166 IRQ_TYPE_EDGE_RISING>; + clocks = <&PBCLK6>; + }; diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml new file mode 100644 index 000000000..a2c553038 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip RV-3032 RTC Device Tree Bindings + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + const: microcrystal,rv3032 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + start-year: true + + trickle-resistor-ohms: + enum: + - 1000 + - 2000 + - 7000 + - 11000 + + trickle-voltage-millivolt: + enum: + - 1750 + - 3000 + - 4400 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + status = "okay"; + pinctrl-0 = <&rtc_nint_pins>; + interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; + trickle-resistor-ohms = <7000>; + trickle-voltage-millivolt = <1750>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt b/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt new file mode 100644 index 000000000..c9d3ac147 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt @@ -0,0 +1,17 @@ +MOXA ART real-time clock + +Required properties: + +- compatible : Should be "moxa,moxart-rtc" +- gpio-rtc-sclk : RTC sclk gpio, with zero flags +- gpio-rtc-data : RTC data gpio, with zero flags +- gpio-rtc-reset : RTC reset gpio, with zero flags + +Example: + + rtc: rtc { + compatible = "moxa,moxart-rtc"; + gpio-rtc-sclk = <&gpio 5 0>; + gpio-rtc-data = <&gpio 6 0>; + gpio-rtc-reset = <&gpio 7 0>; + }; diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt new file mode 100644 index 000000000..b7d98ed3e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt @@ -0,0 +1,24 @@ +NVIDIA Tegra20 real-time clock + +The Tegra RTC maintains seconds and milliseconds counters, and five alarm +registers. The alarms and other interrupts may wake the system from low-power +state. + +Required properties: + +- compatible : For Tegra20, must contain "nvidia,tegra20-rtc". Otherwise, + must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip> + can be tegra30, tegra114, tegra124, or tegra132. +- reg : Specifies base physical address and size of the registers. +- interrupts : A single interrupt specifier. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +Example: + +timer { + compatible = "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; +}; diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt new file mode 100644 index 000000000..3c97bd180 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt @@ -0,0 +1,21 @@ +NXP LPC1788 real-time clock + +The LPC1788 RTC provides calendar and clock functionality +together with periodic tick and alarm interrupt support. + +Required properties: +- compatible : must contain "nxp,lpc1788-rtc" +- reg : Specifies base physical address and size of the registers. +- interrupts : A single interrupt specifier. +- clocks : Must contain clock specifiers for rtc and register clock +- clock-names : Must contain "rtc" and "reg" + See ../clocks/clock-bindings.txt for details. + +Example: +rtc: rtc@40046000 { + compatible = "nxp,lpc1788-rtc"; + reg = <0x40046000 0x1000>; + interrupts = <47>; + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; +}; diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt new file mode 100644 index 000000000..627bb533e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt @@ -0,0 +1,22 @@ +* NXP PCF85063 Real Time Clock + +Required properties: +- compatible: Should one of contain: + "nxp,pcf85063", + "nxp,pcf85063a", + "nxp,pcf85063tp", + "microcrystal,rv8263" +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 7000fF. + +Example: + +pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; +}; diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt new file mode 100644 index 000000000..0b1080c60 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt @@ -0,0 +1,18 @@ +* NXP PCF8523 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf8523". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 12500fF. + +Example: + +pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + quartz-load-femtofarads = <7000>; +}; diff --git a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt new file mode 100644 index 000000000..7371f525a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt @@ -0,0 +1,17 @@ +NXP PCF2123 SPI Real Time Clock + +Required properties: +- compatible: should be: "nxp,pcf2123" + or "microcrystal,rv2123" +- reg: should be the SPI slave chipselect address + +Optional properties: +- spi-cs-high: PCF2123 needs chipselect high + +Example: + +pcf2123: rtc@3 { + compatible = "nxp,pcf2123" + reg = <3> + spi-cs-high; +}; diff --git a/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt new file mode 100644 index 000000000..a2891ceb6 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt @@ -0,0 +1,5 @@ +OLPC XO-1 RTC +~~~~~~~~~~~~~ + +Required properties: + - compatible : "olpc,xo1-rtc" diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt new file mode 100644 index 000000000..3bf63ffa5 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/orion-rtc.txt @@ -0,0 +1,18 @@ +* Mvebu Real Time Clock + +RTC controller for the Kirkwood, the Dove, the Armada 370 and the +Armada XP SoCs + +Required properties: +- compatible : Should be "marvell,orion-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. + +Example: + +rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0xd0010300 0x20>; + interrupts = <50>; +}; diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt new file mode 100644 index 000000000..94adc1cf9 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt @@ -0,0 +1,17 @@ +NXP PCF85263/PCF85363 Real Time Clock +============================ + +Required properties: +- compatible: Should contain "nxp,pcf85263" or "nxp,pcf85363". +- reg: I2C address for chip. + +Optional properties: +- interrupts: IRQ line for the RTC (not implemented). + +Example: + +pcf85363: pcf85363@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; +}; + diff --git a/Documentation/devicetree/bindings/rtc/pcf8563.txt b/Documentation/devicetree/bindings/rtc/pcf8563.txt new file mode 100644 index 000000000..6076fe76d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pcf8563.txt @@ -0,0 +1,28 @@ +* Philips PCF8563/Epson RTC8564 Real Time Clock + +Philips PCF8563/Epson RTC8564 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf8563", + "epson,rtc8564" or + "microcrystal,rv8564" +- reg: I2C address for chip. + +Optional property: +- #clock-cells: Should be 0. +- clock-output-names: + overwrite the default clock name "pcf8563-clkout" + +Example: + +pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; +}; + +device { +... + clocks = <&pcf8563>; +... +}; diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt new file mode 100644 index 000000000..8c6672a1b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt @@ -0,0 +1,14 @@ +* PXA RTC + +PXA specific RTC driver. + +Required properties: +- compatible : Should be "marvell,pxa-rtc" + +Examples: + +rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; +}; diff --git a/Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt b/Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt new file mode 100644 index 000000000..bbf1ccb5d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt @@ -0,0 +1,16 @@ +Realtek RTD129x Real-Time Clock +=============================== + +Required properties: +- compatible : Should be "realtek,rtd1295-rtc" +- reg : Specifies the physical base address and size +- clocks : Specifies the clock gate + + +Example: + + rtc@9801b600 { + compatible = "realtek,rtd1295-clk"; + reg = <0x9801b600 0x100>; + clocks = <&clkc RTD1295_CLK_EN_MISC_RTC>; + }; diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml new file mode 100644 index 000000000..eff9df4b8 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/renesas,sh-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Real Time Clock for Renesas SH and ARM SoCs + +maintainers: + - Chris Brandt <chris.brandt@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + items: + - const: renesas,r7s72100-rtc # RZ/A1H + - const: renesas,sh-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: alarm + - const: period + - const: carry + + clocks: + # The functional clock source for the RTC controller must be listed + # first (if it exists). Additionally, potential clock counting sources + # are to be listed. + minItems: 1 + maxItems: 4 + + clock-names: + # The functional clock must be labeled as "fck". Other clocks + # may be named in accordance to the SoC hardware manuals. + minItems: 1 + maxItems: 4 + items: + enum: [ fck, rtc_x1, rtc_x3, extal ] + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r7s72100-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + rtc: rtc@fcff1000 { + compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc"; + reg = <0xfcff1000 0x2e>; + interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "period", "carry"; + clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>, + <&rtc_x3_clk>, <&extal_clk>; + power-domains = <&cpg_clocks>; + clock-names = "fck", "rtc_x1", "rtc_x3", "extal"; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt b/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt new file mode 100644 index 000000000..2e956b3dc --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt @@ -0,0 +1,22 @@ +ASPEED BMC RTC +============== + +Required properties: + - compatible: should be one of the following + * aspeed,ast2400-rtc for the ast2400 + * aspeed,ast2500-rtc for the ast2500 + * aspeed,ast2600-rtc for the ast2600 + + - reg: physical base address of the controller and length of memory mapped + region + + - interrupts: The interrupt number + +Example: + + rtc@1e781000 { + compatible = "aspeed,ast2400-rtc"; + reg = <0x1e781000 0x18>; + interrupts = <22>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt new file mode 100644 index 000000000..b94b35f36 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt @@ -0,0 +1,27 @@ + Motorola mc146818 compatible RTC +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: + - compatible : "motorola,mc146818" + - reg : should contain registers location and length. + +Optional properties: + - interrupts : should contain interrupt. + - ctrl-reg : Contains the initial value of the control register also + called "Register B". + - freq-reg : Contains the initial value of the frequency register also + called "Regsiter A". + +"Register A" and "B" are usually initialized by the firmware (BIOS for +instance). If this is not done, it can be performed by the driver. + +ISA Example: + + rtc@70 { + compatible = "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt new file mode 100644 index 000000000..36f610bb0 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -0,0 +1,52 @@ +Dallas DS1307 and compatible RTC + +Required properties: +- compatible: should be one of: + "dallas,ds1307", + "dallas,ds1308", + "dallas,ds1337", + "dallas,ds1338", + "dallas,ds1339", + "dallas,ds1388", + "dallas,ds1340", + "dallas,ds1341", + "maxim,ds3231", + "st,m41t0", + "st,m41t00", + "st,m41t11", + "microchip,mcp7940x", + "microchip,mcp7941x", + "pericom,pt7c4338", + "epson,rx8025", + "isil,isl12057" + "epson,rx8130" +- reg: I2C bus address of the device + +Optional properties: +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm +- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only + Selected resistor for trickle charger + Possible values are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- aux-voltage-chargeable: ds1339, ds1340, ds1388 and rx8130 only + Tells whether the battery/supercap of the RTC (if any) is + chargeable or not. + Possible values are 0 (not chargeable), 1 (chargeable) + +Deprecated properties: +- trickle-diode-disable : ds1339, ds1340 and ds1388 only + Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled + (superseded by aux-voltage-chargeable) + +Example: + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupt-parent = <&gpio4>; + interrupts = <20 0>; + trickle-resistor-ohms = <250>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt new file mode 100644 index 000000000..fffac7499 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt @@ -0,0 +1,36 @@ +Freescale FlexTimer Module (FTM) Alarm + +Required properties: +- compatible : Should be "fsl,<chip>-ftm-alarm", the + supported chips include + "fsl,ls1012a-ftm-alarm" + "fsl,ls1021a-ftm-alarm" + "fsl,ls1028a-ftm-alarm" + "fsl,ls1043a-ftm-alarm" + "fsl,ls1046a-ftm-alarm" + "fsl,ls1088a-ftm-alarm" + "fsl,ls208xa-ftm-alarm" + "fsl,lx2160a-ftm-alarm" +- reg : Specifies base physical address and size of the register sets for the + FlexTimer Module. +- interrupts : Should be the FlexTimer Module interrupt. +- fsl,rcpm-wakeup property and rcpm node : Please refer + Documentation/devicetree/bindings/soc/fsl/rcpm.txt + +Optional properties: +- big-endian: If the host controller is big-endian mode, specify this property. + The default endian mode is little-endian. + +Example: +rcpm: rcpm@1e34040 { + compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x18>; + #fsl,rcpm-wakeup-cells = <6>; +}; + +ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1088a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = <0 44 4>; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt new file mode 100644 index 000000000..c746cb221 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt @@ -0,0 +1,30 @@ +ST M41T80 family of RTC and compatible + +Required properties: +- compatible: should be one of: + "st,m41t62", + "st,m41t65", + "st,m41t80", + "st,m41t81", + "st,m41t81s", + "st,m41t82", + "st,m41t83", + "st,m41t84", + "st,m41t85", + "st,m41t87", + "microcrystal,rv4162", +- reg: I2C bus address of the device + +Optional properties: +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm + +Example: + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt new file mode 100644 index 000000000..c014f54a9 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt @@ -0,0 +1,22 @@ +* Amlogic Virtual RTC (VRTC) + +This is a Linux interface to an RTC managed by firmware, hence it's +virtual from a Linux perspective. The interface is 1 register where +an alarm time (in seconds) is to be written. + +Required properties: +- compatible: should be "amlogic,meson-vrtc" +- reg: physical address for the alarm register + +The alarm register is a simple scratch register shared between the +application processors (AP) and the secure co-processor (SCP.) When +the AP suspends, the SCP will use the value of this register to +program an always-on timer before going sleep. When the timer expires, +the SCP will wake up and will then wake the AP. + +Example: + + vrtc: rtc@0a8 { + compatible = "amlogic,meson-vrtc"; + reg = <0x0 0x000a8 0x0 0x4>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson.txt b/Documentation/devicetree/bindings/rtc/rtc-meson.txt new file mode 100644 index 000000000..e921fe66a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-meson.txt @@ -0,0 +1,35 @@ +* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC + +Required properties: +- compatible: should be one of the following describing the hardware: + * "amlogic,meson6-rtc" + * "amlogic,meson8-rtc" + * "amlogic,meson8b-rtc" + * "amlogic,meson8m2-rtc" + +- reg: physical register space for the controller's memory mapped registers. +- interrupts: the interrupt line of the RTC block. +- clocks: reference to the external 32.768kHz crystal oscillator. +- vdd-supply: reference to the power supply of the RTC block. +- resets: reset controller reference to allow reset of the controller + +Optional properties for the battery-backed non-volatile memory: +- #address-cells: should be 1 to address the battery-backed non-volatile memory +- #size-cells: should be 1 to reference the battery-backed non-volatile memory + +Optional child nodes: +- see ../nvmem/nvmem.txt + +Example: + + rtc: rtc@740 { + compatible = "amlogic,meson6-rtc"; + reg = <0x740 0x14>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + clocks = <&rtc32k_xtal>; + vdd-supply = <&rtc_vdd>; + resets = <&reset RESET_RTC>; + + #address-cells = <1>; + #size-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt new file mode 100644 index 000000000..c33d87e5e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt @@ -0,0 +1,14 @@ +Device-Tree bindings for MediaTek SoC based RTC + +Required properties: +- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC +- reg : Specifies base physical address and size of the registers; +- interrupts : Should contain the interrupt for RTC alarm; + +Example: + +rtc: rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0 0x10011000 0 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt new file mode 100644 index 000000000..55a0c8874 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for MediaTek PMIC based RTC + +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works +as a type of multi-function device (MFD). The RTC can be configured and set up +with PMIC wrapper bus which is a common resource shared with the other +functions found on the same PMIC. + +For MediaTek PMIC MFD bindings, see: +../mfd/mt6397.txt + +For MediaTek PMIC wrapper bus bindings, see: +../soc/mediatek/pwrap.txt + +Required properties: +- compatible: Should be one of follows + "mediatek,mt6323-rtc": for MT6323 PMIC + "mediatek,mt6397-rtc": for MT6397 PMIC + +Example: + + pmic { + compatible = "mediatek,mt6323"; + + ... + + rtc { + compatible = "mediatek,mt6323-rtc"; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt new file mode 100644 index 000000000..09fe8f514 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt @@ -0,0 +1,21 @@ +Device-Tree bindings for MediaTek SoC based RTC + +Required properties: +- compatible : Should be + "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC +- reg : Specifies base physical address and size of the registers; +- interrupts : Should contain the interrupt for RTC alarm; +- clocks : Specifies list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : Should contain "rtc" entries + +Example: + +rtc: rtc@10212800 { + compatible = "mediatek,mt7622-rtc", + "mediatek,soc-rtc"; + reg = <0 0x10212800 0 0x200>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml new file mode 100644 index 000000000..4f263fa6f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/rtc-mxc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Real Time Clock of the i.MX SoCs + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Philippe Reynes <tremyfr@gmail.com> + +properties: + compatible: + enum: + - fsl,imx1-rtc + - fsl,imx21-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: input reference + - description: the SoC RTC clock + + clock-names: + items: + - const: ref + - const: ipg + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx27-clock.h> + + rtc@10007000 { + compatible = "fsl,imx21-rtc"; + reg = <0x10007000 0x1000>; + interrupts = <22>; + clocks = <&clks IMX27_CLK_CKIL>, + <&clks IMX27_CLK_RTC_IPG_GATE>; + clock-names = "ref", "ipg"; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml new file mode 100644 index 000000000..2d1a30663 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/rtc-mxc_v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX53 Secure Real Time Clock (SRTC) + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Patrick Bruenn <p.bruenn@beckhoff.com> + +properties: + compatible: + enum: + - fsl,imx53-rtc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + rtc@53fa4000 { + compatible = "fsl,imx53-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt new file mode 100644 index 000000000..062ebb14c --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt @@ -0,0 +1,53 @@ +TI Real Time Clock + +Required properties: +- compatible: + - "ti,da830-rtc" - for RTC IP used similar to that on DA8xx SoC family. + - "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family. + This RTC IP has special WAKE-EN Register to enable + Wakeup generation for event Alarm. It can also be + used to control an external PMIC via the + pmic_power_en pin. + - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family. +- reg: Address range of rtc register set +- interrupts: rtc timer, alarm interrupts in order + +Optional properties: +- system-power-controller: whether the rtc is controlling the system power + through pmic_power_en +- clocks: Any internal or external clocks feeding in to rtc +- clock-names: Corresponding names of the clocks +- pinctrl-0: a phandle pointing to the pin settings for the device +- pinctrl-names: should be "default" + +Optional subnodes: +- generic pinctrl node + +Required pinctrl subnodes properties: +- pins - Names of ext_wakeup pins to configure + +Optional pinctrl subnodes properties: +- input-enable - Enables ext_wakeup +- ti,active-high - Set input active high (by default active low) + +Example: + +rtc@1c23000 { + compatible = "ti,da830-rtc"; + reg = <0x23000 0x1000>; + interrupts = <19 + 19>; + interrupt-parent = <&intc>; + system-power-controller; + clocks = <&clk_32k_rtc>, <&clk_32768_ck>; + clock-names = "ext-clk", "int-clk"; + + pinctrl-0 = <&ext_wakeup>; + pinctrl-names = "default"; + + ext_wakeup: ext-wakeup { + pins = "ext_wakeup0"; + input-enable; + ti,active-high; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt new file mode 100644 index 000000000..2340938cd --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt @@ -0,0 +1,17 @@ +IBM OPAL real-time clock +------------------------ + +Required properties: +- compatible: Should be "ibm,opal-rtc" + +Optional properties: +- wakeup-source: Decides if the wakeup is supported or not + (Legacy property supported: "has-tpo") + +Example: + rtc { + compatible = "ibm,opal-rtc"; + wakeup-source; + phandle = <0x10000029>; + linux,phandle = <0x10000029>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt new file mode 100644 index 000000000..c6cf37758 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt @@ -0,0 +1,32 @@ +Palmas RTC controller bindings + +Required properties: +- compatible: + - "ti,palmas-rtc" for palma series of the RTC controller +- interrupts: Interrupt number of RTC submodule on device. + +Optional properties: + +- ti,backup-battery-chargeable: The Palmas series device like TPS65913 or + TPS80036 supports the backup battery for powering the RTC when main + battery is removed or in very low power state. The backup battery + can be chargeable or non-chargeable. This flag will tells whether + battery is chargeable or not. If charging battery then driver can + enable the charging. +- ti,backup-battery-charge-high-current: Enable high current charging in + backup battery. Device supports the < 100uA and > 100uA charging. + The high current will be > 100uA. Absence of this property will + charge battery to lower current i.e. < 100uA. + +Example: + palmas: tps65913@58 { + ... + palmas_rtc: rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt new file mode 100644 index 000000000..daf88265d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt @@ -0,0 +1,28 @@ +STMicroelectronics Low Power Controller (LPC) - RTC +=================================================== + +LPC currently supports Watchdog OR Real Time Clock OR Clocksource +functionality. + +[See: ../watchdog/st_lpc_wdt.txt for Watchdog options] +[See: ../timer/st,stih407-lpc for Clocksource options] + +Required properties + +- compatible : Must be: "st,stih407-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of three modes: + ST_LPC_MODE_RTC [0] + ST_LPC_MODE_WDT [1] + ST_LPC_MODE_CLKSRC [2] + One (and only one) mode must be selected. + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,lpc-mode = <ST_LPC_MODE_RTC>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt new file mode 100644 index 000000000..b8d36fce5 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc.txt @@ -0,0 +1 @@ +This file has been moved to rtc.yaml. diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml new file mode 100644 index 000000000..d30dc045a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTC Generic Binding + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + This document describes generic bindings which can be used to + describe Real Time Clock devices in a device tree. + +properties: + $nodename: + pattern: "^rtc(@.*|-[0-9a-f])*$" + + aux-voltage-chargeable: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Tells whether the battery/supercap of the RTC (if any) is + chargeable or not: + 0: not chargeable + 1: chargeable + + quartz-load-femtofarads: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The capacitive load of the quartz(x-tal), expressed in femto + Farad (fF). The default value shall be listed (if optional), + and likewise all valid values. + + start-year: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + If provided, the default hardware range supported by the RTC is + shifted so the first usable year is the specified one. + + trickle-diode-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Do not use internal trickle charger diode. Should be given if + internal trickle charger diode should be disabled. + deprecated: true + + trickle-resistor-ohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selected resistor for trickle charger. Should be given + if trickle charger should be enabled. + + trickle-voltage-millivolt: + description: + Selected voltage for trickle charger. Should be given + if trickle charger should be enabled and the trickle voltage is different + from the RTC main power supply. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enables wake up of host system on alarm. + + reset-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RTC is able to reset the machine. + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml new file mode 100644 index 000000000..d51b23693 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/s3c-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C, S5P and Exynos Real Time Clock controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - enum: + - samsung,s3c2410-rtc + - samsung,s3c2416-rtc + - samsung,s3c2443-rtc + - samsung,s3c6410-rtc + - const: samsung,exynos3250-rtc + deprecated: true + + reg: + maxItems: 1 + + clocks: + description: + Must contain a list of phandle and clock specifier for the rtc + clock and in the case of a s3c6410 compatible controller, also + a source clock. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Must contain "rtc" and for a s3c6410 compatible controller + also "rtc_src". + minItems: 1 + maxItems: 2 + + interrupts: + description: + Two interrupt numbers to the cpu should be specified. First + interrupt number is the rtc alarm interrupt and second interrupt number + is the rtc tick interrupt. The number of cells representing a interrupt + depends on the parent interrupt controller. + minItems: 2 + maxItems: 2 + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c6410-rtc + - samsung,exynos3250-rtc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: rtc + - const: rtc_src + else: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: rtc + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/clock/samsung,s2mps11.h> + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 4>, <0 45 4>; + clocks = <&clock CLK_RTC>, + <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; + }; diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml new file mode 100644 index 000000000..482e5af21 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/sa1100-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Real Time Clock controller bindings + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Alessandro Zummo <a.zummo@towertech.it> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Rob Herring <robh+dt@kernel.org> + +properties: + compatible: + enum: + - mrvl,sa1100-rtc + - mrvl,mmp-rtc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: 'rtc 1Hz' + - const: 'rtc alarm' + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5>, <6>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt new file mode 100644 index 000000000..58885b55d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt @@ -0,0 +1,13 @@ +SiRFSoC Real Time Clock + +Required properties: +- compatible: must be "sirf,prima2-sysrtc" +- reg: address range of rtc register set. +- interrupts: rtc alarm interrupts. + +Example: + rtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; diff --git a/Documentation/devicetree/bindings/rtc/snvs-rtc.txt b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt new file mode 100644 index 000000000..fb61ed77a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt @@ -0,0 +1 @@ +See Documentation/devicetree/bindings/crypto/fsl-sec4.txt for details. diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt new file mode 100644 index 000000000..fecf8e4ad --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt @@ -0,0 +1,15 @@ +* SPEAr RTC + +Required properties: +- compatible : "st,spear600-rtc" +- reg : Address range of the rtc registers +- interrupt: Should contain the rtc interrupt number + +Example: + + rtc@fc000000 { + compatible = "st,spear600-rtc"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt new file mode 100644 index 000000000..1f5754299 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt @@ -0,0 +1,26 @@ +Spreadtrum SC27xx Real Time Clock + +Required properties: +- compatible: should be "sprd,sc2731-rtc". +- reg: address offset of rtc register. +- interrupts: rtc alarm interrupt. + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml new file mode 100644 index 000000000..5456604b1 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/st,stm32-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Real Time Clock Bindings + +maintainers: + - Gabriel Fernandez <gabriel.fernandez@st.com> + +properties: + compatible: + enum: + - st,stm32-rtc + - st,stm32h7-rtc + - st,stm32mp1-rtc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: rtc_ck + + interrupts: + maxItems: 1 + + st,syscfg: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 + description: | + Phandle/offset/mask triplet. The phandle to pwrcfg used to + access control register at offset, and change the dbp (Disable Backup + Protection) bit represented by the mask, mandatory to disable/enable backup + domain (RTC registers) write protection. + + assigned-clocks: + description: | + override default rtc_ck parent clock reference to the rtc_ck clock entry + maxItems: 1 + + assigned-clock-parents: + description: | + override default rtc_ck parent clock phandle of the new parent clock of rtc_ck + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32-rtc + + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + + clock-names: false + + required: + - st,syscfg + + - if: + properties: + compatible: + contains: + const: st,stm32h7-rtc + + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + required: + - clock-names + - st,syscfg + + - if: + properties: + compatible: + contains: + const: st,stm32mp1-rtc + + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + assigned-clocks: false + assigned-clock-parents: false + + required: + - clock-names + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/mfd/stm32f4-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + st,syscfg = <&pwrcfg 0x00 0x100>; + }; + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt new file mode 100644 index 000000000..e615a897b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt @@ -0,0 +1,16 @@ +ST-Ericsson COH 901 331 Real Time Clock + +Required properties: +- compatible: must be "stericsson,coh901331" +- reg: address range of rtc register set. +- interrupts: rtc alarm interrupt. +- clocks: phandle to the rtc clock source + +Example: + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt new file mode 100644 index 000000000..fa6a94226 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt @@ -0,0 +1,21 @@ +* STMP3xxx/i.MX28 Time Clock controller + +Required properties: +- compatible: should be one of the following. + * "fsl,stmp3xxx-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: rtc alarm interrupt + +Optional properties: +- stmp,crystal-freq: override crystal frequency as determined from fuse bits. + Only <32000> and <32768> are possible for the hardware. Use <0> for + "no crystal". + +Example: + +rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; + reg = <0x80056000 2000>; + interrupts = <29>; +}; diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32k.txt b/Documentation/devicetree/bindings/rtc/ti,bq32k.txt new file mode 100644 index 000000000..e204906b9 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/ti,bq32k.txt @@ -0,0 +1,18 @@ +* TI BQ32000 I2C Serial Real-Time Clock + +Required properties: +- compatible: Should contain "ti,bq32000". +- reg: I2C address for chip + +Optional properties: +- trickle-resistor-ohms : Selected resistor for trickle charger + Values usable are 1120 and 20180 + Should be given if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled +Example: + bq32000: rtc@68 { + compatible = "ti,bq32000"; + trickle-resistor-ohms = <1120>; + reg = <0x68>; + }; diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml new file mode 100644 index 000000000..c7d14de21 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/trivial-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial RTCs + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + This is a list of trivial RTC devices that have simple device tree + bindings, consisting only of a compatible field, an address and + possibly an interrupt line. + +allOf: + - $ref: "rtc.yaml#" + +properties: + compatible: + enum: + # AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface + - abracon,abb5zes3 + # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface + - abracon,abeoz9 + # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output + - dallas,ds1374 + # Dallas DS1672 Real-time Clock + - dallas,ds1672 + # Extremely Accurate I²C RTC with Integrated Crystal and SRAM + - dallas,ds3232 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE + - epson,rx8010 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM + - epson,rx8571 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE + - epson,rx8581 + # Intersil ISL1208 Low Power RTC with Battery Backed SRAM + - isil,isl1208 + # Intersil ISL1218 Low Power RTC with Battery Backed SRAM + - isil,isl1218 + # Intersil ISL12022 Real-time Clock + - isil,isl12022 + # Real Time Clock Module with I2C-Bus + - microcrystal,rv3028 + # Real Time Clock Module with I2C-Bus + - microcrystal,rv3029 + # Real Time Clock + - microcrystal,rv8523 + # Real-time clock + - nxp,pcf2127 + # Real-time clock + - nxp,pcf2129 + # Real-time clock + - nxp,pca2129 + # Real-time Clock Module + - pericom,pt7c4338 + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,r2025sd + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,r2221tl + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rs5c372a + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rs5c372b + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rv5c386 + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rv5c387a + # 2-wire CMOS real-time clock + - sii,s35390a + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - whwave,sd3078 + # Xircom X1205 I2C RTC + - xircom,x1205 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + start-year: true + +required: + - compatible + - reg + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt new file mode 100644 index 000000000..8f9a94f2f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/twl-rtc.txt @@ -0,0 +1,11 @@ +* Texas Instruments TWL4030/6030 RTC + +Required properties: +- compatible : Should be "ti,twl4030-rtc" +- interrupts : Should be the interrupt number. + +Example: + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt new file mode 100644 index 000000000..3c0484c49 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Realtime Clock Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-rtc" +- reg : Should contain 1 register ranges(address and length) +- interrupts : alarm interrupt + +Example: + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; diff --git a/Documentation/devicetree/bindings/rtc/xgene-rtc.txt b/Documentation/devicetree/bindings/rtc/xgene-rtc.txt new file mode 100644 index 000000000..fd195c358 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/xgene-rtc.txt @@ -0,0 +1,28 @@ +* APM X-Gene Real Time Clock + +RTC controller for the APM X-Gene Real Time Clock + +Required properties: +- compatible : Should be "apm,xgene-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. +- #clock-cells: Should be 1. +- clocks: Reference to the clock entry. + +Example: + +rtcclk: rtcclk { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <100000000>; + clock-output-names = "rtcclk"; +}; + +rtc: rtc@10510000 { + compatible = "apm,xgene-rtc"; + reg = <0x0 0x10510000 0x0 0x400>; + interrupts = <0x0 0x46 0x4>; + #clock-cells = <1>; + clocks = <&rtcclk 0>; +}; diff --git a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt new file mode 100644 index 000000000..0df6f016b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt @@ -0,0 +1,25 @@ +* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock + +RTC controller for the Xilinx Zynq MPSoC Real Time Clock +Separate IRQ lines for seconds and alarm + +Required properties: +- compatible: Should be "xlnx,zynqmp-rtc" +- reg: Physical base address of the controller and length + of memory mapped region. +- interrupts: IRQ lines for the RTC. +- interrupt-names: interrupt line names eg. "sec" "alarm" + +Optional: +- calibration: calibration value for 1 sec period which will + be programmed directly to calibration register + +Example: +rtc: rtc@ffa60000 { + compatible = "xlnx,zynqmp-rtc"; + reg = <0x0 0xffa60000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 26 4>, <0 27 4>; + interrupt-names = "alarm", "sec"; + calibration = <0x198233>; +}; |