summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/security
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/security/tpm/google,cr50.txt19
-rw-r--r--Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt41
-rw-r--r--Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt34
-rw-r--r--Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt32
-rw-r--r--Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt26
-rw-r--r--Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt25
-rw-r--r--Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt23
7 files changed, 200 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/security/tpm/google,cr50.txt b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt
new file mode 100644
index 000000000..cd69c2efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt
@@ -0,0 +1,19 @@
+* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus.
+
+H1 Secure Microcontroller running Cr50 firmware provides several
+functions, including TPM-like functionality. It communicates over
+SPI using the FIFO protocol described in the PTP Spec, section 6.
+
+Required properties:
+- compatible: Should be "google,cr50".
+- spi-max-frequency: Maximum SPI frequency.
+
+Example:
+
+&spi0 {
+ tpm@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ spi-max-frequency = <800000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt
new file mode 100644
index 000000000..d89f99971
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt
@@ -0,0 +1,41 @@
+* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm)
+
+Required properties:
+
+- compatible : property name that conveys the platform architecture
+ identifiers, as 'IBM,vtpm'
+- device_type : specifies type of virtual device
+- interrupts : property specifying the interrupt source number and
+ sense code associated with this virtual I/O Adapters
+- ibm,my-drc-index : integer index for the connector between the device
+ and its parent - present only if Dynamic
+ Reconfiguration(DR) Connector is enabled
+- ibm,#dma-address-cells: specifies the number of cells that are used to
+ encode the physical address field of dma-window
+ properties
+- ibm,#dma-size-cells : specifies the number of cells that are used to
+ encode the size field of dma-window properties
+- ibm,my-dma-window : specifies DMA window associated with this virtual
+ IOA
+- ibm,loc-code : specifies the unique and persistent location code
+ associated with this virtual I/O Adapters
+- linux,sml-base : 64-bit base address of the reserved memory allocated
+ for the firmware event log
+- linux,sml-size : size of the memory allocated for the firmware event log
+
+Example (IBM Virtual Trusted Platform Module)
+---------------------------------------------
+
+ vtpm@30000003 {
+ ibm,#dma-size-cells = <0x2>;
+ compatible = "IBM,vtpm";
+ device_type = "IBM,vtpm";
+ ibm,my-drc-index = <0x30000003>;
+ ibm,#dma-address-cells = <0x2>;
+ linux,sml-base = <0xc60e 0x0>;
+ interrupts = <0xa0003 0x0>;
+ ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
+ ibm,loc-code = "U8286.41A.10082DV-V3-C3";
+ reg = <0x30000003>;
+ linux,sml-size = <0xbce10200>;
+ };
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
new file mode 100644
index 000000000..0dc121b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -0,0 +1,34 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+
+Optional ST33ZP24 Properties:
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
+
+&i2c2 {
+
+
+ st33zp24: st33zp24@13 {
+
+ compatible = "st,st33zp24-i2c";
+
+ reg = <0x13>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
new file mode 100644
index 000000000..37198971f
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -0,0 +1,32 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-spi".
+- spi-max-frequency: Maximum SPI frequency (<= 10000000).
+
+Optional ST33ZP24 Properties:
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
+
+&mcspi4 {
+
+
+ st33zp24@0 {
+
+ compatible = "st,st33zp24-spi";
+
+ spi-max-frequency = <10000000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
new file mode 100644
index 000000000..a65d7b71e
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
@@ -0,0 +1,26 @@
+* Device Tree Bindings for I2C based Trusted Platform Module(TPM)
+
+Required properties:
+
+- compatible : 'manufacturer,model', eg. nuvoton,npct650
+- label : human readable string describing the device, eg. "tpm"
+- linux,sml-base : 64-bit base address of the reserved memory allocated for
+ the firmware event log
+- linux,sml-size : size of the memory allocated for the firmware event log
+
+Optional properties:
+
+- powered-while-suspended: present when the TPM is left powered on between
+ suspend and resume (makes the suspend/resume
+ callbacks do nothing).
+
+Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
+----------------------------------------------------------
+
+tpm@57 {
+ reg = <0x57>;
+ label = "tpm";
+ compatible = "nuvoton,npct650", "nuvoton,npct601";
+ linux,sml-base = <0x7f 0xfd450000>;
+ linux,sml-size = <0x10000>;
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
new file mode 100644
index 000000000..7c6304426
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
@@ -0,0 +1,25 @@
+Trusted Computing Group MMIO Trusted Platform Module
+
+The TCG defines multi vendor standard for accessing a TPM chip, this
+is the standard protocol defined to access the TPM via MMIO. Typically
+this interface will be implemented over Intel's LPC bus.
+
+Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG
+publication for the specification.
+
+Required properties:
+
+- compatible: should contain a string below for the chip, followed by
+ "tcg,tpm-tis-mmio". Valid chip strings are:
+ * "atmel,at97sc3204"
+- reg: The location of the MMIO registers, should be at least 0x5000 bytes
+- interrupts: An optional interrupt indicating command completion.
+
+Example:
+
+ tpm_tis@90000 {
+ compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
+ reg = <0x90000 0x5000>;
+ interrupt-parent = <&EIC0>;
+ interrupts = <1 2>;
+ };
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
new file mode 100644
index 000000000..b800667da
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
@@ -0,0 +1,23 @@
+Required properties:
+- compatible: should be one of the following
+ "st,st33htpm-spi"
+ "infineon,slb9670"
+ "tcg,tpm_tis-spi"
+- spi-max-frequency: Maximum SPI frequency (depends on TPMs).
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
+
+&mcspi4 {
+
+
+ tpm_tis@0 {
+
+ compatible = "tcg,tpm_tis-spi";
+
+ spi-max-frequency = <10000000>;
+ };
+};