summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt31
1 files changed, 31 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
new file mode 100644
index 000000000..07013fa60
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -0,0 +1,31 @@
+* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible: Should be "cirrus,ep7209-uart".
+- reg: Address and length of the register set for the device.
+- interrupts: Should contain UART TX and RX interrupt.
+- clocks: Should contain UART core clock number.
+- syscon: Phandle to SYSCON node, which contain UART control bits.
+
+Optional properties:
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
+ line respectively.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+ aliases {
+ serial0 = &uart1;
+ };
+
+ uart1: uart@80000480 {
+ compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
+ reg = <0x80000480 0x80>;
+ interrupts = <12 13>;
+ clocks = <&clks 11>;
+ syscon = <&syscon1>;
+ cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+ };