summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial/mtk-uart.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/serial/mtk-uart.txt')
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt56
1 files changed, 56 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
new file mode 100644
index 000000000..647b5aee8
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -0,0 +1,56 @@
+* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible should contain:
+ * "mediatek,mt2701-uart" for MT2701 compatible UARTS
+ * "mediatek,mt2712-uart" for MT2712 compatible UARTS
+ * "mediatek,mt6580-uart" for MT6580 compatible UARTS
+ * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+ * "mediatek,mt6755-uart" for MT6755 compatible UARTS
+ * "mediatek,mt6765-uart" for MT6765 compatible UARTS
+ * "mediatek,mt6779-uart" for MT6779 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
+ * "mediatek,mt6797-uart" for MT6797 compatible UARTS
+ * "mediatek,mt7622-uart" for MT7622 compatible UARTS
+ * "mediatek,mt7623-uart" for MT7623 compatible UARTS
+ * "mediatek,mt7629-uart" for MT7629 compatible UARTS
+ * "mediatek,mt8127-uart" for MT8127 compatible UARTS
+ * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+ * "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
+ * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS
+ * "mediatek,mt8516-uart" for MT8516 compatible UARTS
+ * "mediatek,mt6577-uart" for MT6577 and all of the above
+
+- reg: The base address of the UART register bank.
+
+- interrupts:
+ index 0: an interrupt specifier for the UART controller itself
+ index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to
+ support Rx in-band wake up. If one would like to use this feature,
+ one must create an addtional pinctrl to reconfigure Rx pin to normal
+ GPIO before suspend.
+
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names:
+ - "baud": The clock the baudrate is derived from
+ - "bus": The bus clock for register accesses (optional)
+
+For compatibility with older device trees an unnamed clock is used for the
+baud clock if the baudclk does not exist. Do not use this for new designs.
+
+Example:
+
+ uart0: serial@11006000 {
+ compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+ reg = <0x11006000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&uart_clk>, <&bus_clk>;
+ clock-names = "baud", "bus";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart_pin>;
+ pinctrl-1 = <&uart_pin_sleep>;
+ };