summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt92
1 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
new file mode 100644
index 000000000..9d049d4bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
@@ -0,0 +1,92 @@
+Devicetree bindings for the Axentia TSE-850 audio complex
+
+Required properties:
+ - compatible: "axentia,tse850-pcm5142"
+ - axentia,cpu-dai: The phandle of the cpu dai.
+ - axentia,audio-codec: The phandle of the PCM5142 codec.
+ - axentia,add-gpios: gpio specifier that controls the mixer.
+ - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
+ - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
+ - axentia,ana-supply: Regulator that supplies the output amplifier. Must
+ support voltages in the 2V - 20V range, in 1V steps.
+
+The schematics explaining the gpios are as follows:
+
+ loop1 relays
+ IN1 +---o +------------+ o---+ OUT1
+ \ /
+ + +
+ | / |
+ +--o +--. |
+ | add | |
+ | V |
+ | .---. |
+ DAC +----------->|Sum|---+
+ | '---' |
+ | |
+ + +
+
+ IN2 +---o--+------------+--o---+ OUT2
+ loop2 relays
+
+The 'loop1' gpio pin controlls two relays, which are either in loop position,
+meaning that input and output are directly connected, or they are in mixer
+position, meaning that the signal is passed through the 'Sum' mixer. Similarly
+for 'loop2'.
+
+In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
+(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
+are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
+are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
+the PCM5142 codec.
+
+Example:
+
+ &ssc0 {
+ #sound-dai-cells = <0>;
+
+ };
+
+ &i2c {
+ codec: pcm5142@4c {
+ compatible = "ti,pcm5142";
+
+ reg = <0x4c>;
+
+ AVDD-supply = <&reg_3v3>;
+ DVDD-supply = <&reg_3v3>;
+ CPVDD-supply = <&reg_3v3>;
+
+ clocks = <&sck>;
+
+ pll-in = <3>;
+ pll-out = <6>;
+ };
+ };
+
+ ana: ana-reg {
+ compatible = "pwm-regulator";
+
+ regulator-name = "ANA";
+
+ pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+ pwm-dutycycle-unit = <1000>;
+ pwm-dutycycle-range = <100 1000>;
+
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <20000000>;
+ regulator-ramp-delay = <1000>;
+ };
+
+ sound {
+ compatible = "axentia,tse850-pcm5142";
+
+ axentia,cpu-dai = <&ssc0>;
+ axentia,audio-codec = <&codec>;
+
+ axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+ axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+ axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+ axentia,ana-supply = <&ana>;
+ };