diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/qcom,q6afe.txt | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt new file mode 100644 index 000000000..2d6fb2ea7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -0,0 +1,201 @@ +Qualcomm Audio Front End (Q6AFE) binding + +AFE is one of the APR audio service on Q6DSP +Please refer to qcom,apr.txt for details of the common apr service bindings +used by all apr services. Must contain the following properties. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>" + Or "qcom,q6afe" where the version number can be queried + from DSP. + example "qcom,q6afe" + += AFE DAIs (Digial Audio Interface) +"dais" subnode of the AFE node. It represents afe dais, each afe dai is a +subnode of "dais" representing board specific dai setup. +"dais" node should have following properties followed by dai children. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,q6afe-dais" + +- #sound-dai-cells + Usage: required + Value type: <u32> + Definition: Must be 1 + +- #address-cells + Usage: required + Value type: <u32> + Definition: Must be 1 + +- #size-cells + Usage: required + Value type: <u32> + Definition: Must be 0 + +== AFE DAI is subnode of "dais" and represent a dai, it includes board specific +configuration of each dai. Must contain the following properties. + +- reg + Usage: required + Value type: <u32> + Definition: Must be dai id + +- qcom,sd-lines + Usage: required for mi2s interface + Value type: <prop-encoded-array> + Definition: Must be list of serial data lines used by this dai. + should be one or more of the 0-3 sd lines. + + - qcom,tdm-sync-mode: + Usage: required for tdm interface + Value type: <prop-encoded-array> + Definition: Synchronization mode. + 0 - Short sync bit mode + 1 - Long sync mode + 2 - Short sync slot mode + + - qcom,tdm-sync-src: + Usage: required for tdm interface + Value type: <prop-encoded-array> + Definition: Synchronization source. + 0 - External source + 1 - Internal source + + - qcom,tdm-data-out: + Usage: required for tdm interface + Value type: <prop-encoded-array> + Definition: Data out signal to drive with other masters. + 0 - Disable + 1 - Enable + + - qcom,tdm-invert-sync: + Usage: required for tdm interface + Value type: <prop-encoded-array> + Definition: Invert the sync. + 0 - Normal + 1 - Invert + + - qcom,tdm-data-delay: + Usage: required for tdm interface + Value type: <prop-encoded-array> + Definition: Number of bit clock to delay data + with respect to sync edge. + 0 - 0 bit clock cycle + 1 - 1 bit clock cycle + 2 - 2 bit clock cycle + + - qcom,tdm-data-align: + Usage: required for tdm interface + Value type: <prop-encoded-array> + Definition: Indicate how data is packed + within the slot. For example, 32 slot width in case of + sample bit width is 24. + 0 - MSB + 1 - LSB + += AFE CLOCKSS +"clocks" subnode of the AFE node. It represents q6afe clocks +"clocks" node should have following properties. +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,q6afe-clocks" + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: Must be 2. Clock Id followed by + below valid clock coupling attributes. + 1 - for no coupled clock + 2 - for dividend of the coupled clock + 3 - for divisor of the coupled clock + 4 - for inverted and no couple clock + += EXAMPLE + +apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + + dais { + compatible = "qcom,q6afe-dais"; + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dai@1 { + reg = <HDMI_RX>; + }; + + dai@24 { + reg = <PRIMARY_TDM_RX_0>; + qcom,tdm-sync-mode = <1>: + qcom,tdm-sync-src = <1>; + qcom,tdm-data-out = <0>; + qcom,tdm-invert-sync = <1>; + qcom,tdm-data-delay = <1>; + qcom,tdm-data-align = <0>; + + }; + + dai@25 { + reg = <PRIMARY_TDM_TX_0>; + qcom,tdm-sync-mode = <1>: + qcom,tdm-sync-src = <1>; + qcom,tdm-data-out = <0>; + qcom,tdm-invert-sync = <1>; + qcom,tdm-data-delay <1>: + qcom,tdm-data-align = <0>; + }; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 2>; + }; + + dai@17 { + reg = <PRIMARY_MI2S_TX>; + qcom,sd-lines = <1>; + }; + + dai@18 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0 3>; + }; + + dai@19 { + reg = <SECONDARY_MI2S_TX>; + qcom,sd-lines = <1>; + }; + + dai@20 { + reg = <TERTIARY_MI2S_RX>; + qcom,sd-lines = <1 3>; + }; + + dai@21 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0>; + }; + + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + + dai@23 { + reg = <QUATERNARY_MI2S_TX>; + qcom,sd-lines = <1>; + }; + }; + + clocks { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; +}; |