summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/tlv320aic31xx.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic31xx.txt77
1 files changed, 77 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
new file mode 100644
index 000000000..e37230369
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -0,0 +1,77 @@
+Texas Instruments - tlv320aic31xx Codec module
+
+The tlv320aic31xx serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+ "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
+ "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
+ "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+ "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+ "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
+ "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+ "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+ "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
+
+- reg - <int> - I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+ DVDD-supply : power supplies for the device as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Optional properties:
+
+- reset-gpios - GPIO specification for the active low RESET input.
+- ai31xx-micbias-vg - MicBias Voltage setting
+ 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+ 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+ 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+ If this node is not mentioned or if the value is unknown, then
+ micbias is set to 2.0V.
+- ai31xx-ocmv - output common-mode voltage setting
+ 0 - 1.35V,
+ 1 - 1.5V,
+ 2 - 1.65V,
+ 3 - 1.8V
+
+Deprecated properties:
+
+- gpio-reset - gpio pin number used for codec reset
+
+CODEC output pins:
+ * HPL
+ * HPR
+ * SPL, devices with stereo speaker amp
+ * SPR, devices with stereo speaker amp
+ * SPK, devices with mono speaker amp
+ * MICBIAS
+
+CODEC input pins:
+ * MIC1LP, devices with ADC
+ * MIC1RP, devices with ADC
+ * MIC1LM, devices with ADC
+ * AIN1, devices without ADC
+ * AIN2, devices without ADC
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+
+tlv320aic31xx: tlv320aic31xx@18 {
+ compatible = "ti,tlv320aic311x";
+ reg = <0x18>;
+
+ ai31xx-micbias-vg = <MICBIAS_OFF>;
+
+ reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+ HPVDD-supply = <&regulator>;
+ SPRVDD-supply = <&regulator>;
+ SPLVDD-supply = <&regulator>;
+ AVDD-supply = <&regulator>;
+ IOVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator>;
+};