summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt65
1 files changed, 65 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
new file mode 100644
index 000000000..30a79da9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -0,0 +1,65 @@
+ARM Freescale DSPI controller
+
+Required properties:
+- compatible : must be one of:
+ "fsl,vf610-dspi",
+ "fsl,ls1021a-v1.0-dspi",
+ "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls1028a-dspi",
+ "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
+ "fsl,ls2085a-dspi",
+ "fsl,lx2160a-dspi",
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+- clocks: from common clock binding: handle to dspi clock.
+- clock-names: from common clock binding: Shall be "dspi".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must contain a "default" entry.
+- spi-num-chipselects : the number of the chipselect signals.
+
+Optional property:
+- big-endian: If present the dspi device's registers are implemented
+ in big endian mode.
+- bus-num : the slave chip chipselect signal number.
+
+Optional SPI slave node properties:
+- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
+ select and the start of clock signal, at the start of a transfer.
+- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
+ signal and deactivating chip select, at the end of a transfer.
+
+Example:
+
+dspi0@4002c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002c000 0x1000>;
+ interrupts = <0 67 0x04>;
+ clocks = <&clks VF610_CLK_DSPI0>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0_1>;
+ big-endian;
+
+ sflash: at26df081a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at26df081a";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ linux,modalias = "m25p80";
+ modal = "at26df081a";
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+};
+
+